at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / sheevaplug.h

diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index c5de86eb034fbaad4a42cf1d0f03d2312625be57..83dd8ff08f217fab84c9f74dd58883c9e2591efe 100644 (file)
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -33,82 +33,28 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL         1
-#define CONFIG_ARM926EJS       1       /* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131        1       /* CPU Core subversion */
 #define CONFIG_KIRKWOOD                1       /* SOC Family Name */
 #define CONFIG_KW88F6281       1       /* SOC Name */
 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */
-
-#define CONFIG_MD5     /* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT     /* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8  /* Set RGMII Pad voltage to 1.8V */
-
-/*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ          1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#define CONFIG_SYS_NS16550_CLK         CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1                KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX      1       /*Console on UART0 */
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, \
-                                         115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY       3       /* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG      1       /* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1     /* enable memory tag */
-
-#define        CONFIG_SYS_PROMPT       "Marvell>> "    /* Command Prompt */
-#define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
-#define        CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
-               +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
 
 /*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
-
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define NAND_MAX_CHIPS                 1
-#define CONFIG_SYS_NAND_BASE           0xD8000000      /* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL           1
-#endif
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
@@ -143,58 +89,14 @@
        "x_bootcmd_usb=usb start\0" \
        "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  (1024 * 1024) /* 1 MiB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE       128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_ARCH_CPU_INIT   /* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT  /* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS   4
-#define CONFIG_STACKSIZE       0x00100000      /* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR   0x00800000      /* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000    /* 4M */
-#define CONFIG_SYS_MEMTEST_END 0x007fffff      /*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000    /* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-
 /*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE      /* include NetConsole support   */
-#define CONFIG_NET_MULTI       /* specify more that one ports available */
-#define        CONFIG_MII              /* expose smi ove miiphy interface */
-#define CONFIG_MVGBE           /* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
 #define CONFIG_MVGBE_PORTS     {1, 0}  /* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR    0
-#define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R     /* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
 
-/*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI                        /* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD       /* on Kirkwood platform */
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
-
 /*
  * File system
  */