spi: mxc_spi: Set master mode for all channels

[karo-tx-uboot.git] / include / configs / smdk6400.h

diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index 671f2c7c8b1df6347b490cf1cdcc8b8ef7fc1f45..d4dc8ef82de9c982d55252370d234f9371957ee0 100644 (file)
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -44,6 +44,11 @@
 #define CONFIG_PERIPORT_BASE   0x70000000
 #define CONFIG_PERIPORT_SIZE   0x13
 
+#define CONFIG_SYS_IRAM_BASE    0x0c000000  /* Internal SRAM base address */
+#define CONFIG_SYS_IRAM_SIZE    0x2000      /* 8 KB of internal SRAM memory */
+#define CONFIG_SYS_IRAM_END     (CONFIG_SYS_IRAM_BASE + CONFIG_SYS_IRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IRAM_END - GENERATED_GBL_DATA_SIZE)
+
 #define CONFIG_SYS_SDRAM_BASE  0x50000000
 
 /* input clock of PLL: SMDK6400 has 12MHz input clock */
@@ -60,7 +65,7 @@
 /*
  * Architecture magic and machine type
  */
-#define MACH_TYPE              1270
+#define CONFIG_MACH_TYPE               1270
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -73,7 +78,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900                  /* we have a CS8900 on-board    */
 #define CONFIG_CS8900_BASE             0x18800300
 #define CONFIG_CS8900_BUS16            /* follow the Linux driver      */
@@ -84,9 +88,6 @@
 #define CONFIG_SERIAL1          1      /* we use SERIAL 1 on SMDK6400  */
 
 #define CONFIG_SYS_HUSH_PARSER                 /* use "hush" command parser    */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#endif
 
 #define CONFIG_CMDLINE_EDITING
 
@@ -140,16 +141,6 @@
 
 #define CONFIG_SYS_HZ                  1000
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       0x40000         /* regular stack 256KB */
-
 /**********************************
  Support Clock Settings
  **********************************
@@ -258,12 +249,8 @@
 #define CONFIG_SYS_NAND_ECCSIZE        CONFIG_SYS_NAND_PAGE_SIZE
 /* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */
 #define CONFIG_SYS_NAND_ECCBYTES       4
-/* Number of ECC-blocks per NAND page */
-#define CONFIG_SYS_NAND_ECCSTEPS       (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
 /* Size of a single OOB region */
 #define CONFIG_SYS_NAND_OOBSIZE        64
-/* Number of ECC bytes per page */
-#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
 /* ECC byte positions */
 #define CONFIG_SYS_NAND_ECCPOS         {40, 41, 42, 43, 44, 45, 46, 47, \
                                 48, 49, 50, 51, 52, 53, 54, 55, \