snapper9260: remove unused AT91_LEGACY

[karo-tx-uboot.git] / include / configs / snapper9260.h

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 7def16fe6bb09edf078019e4a3bfe2b50ae4841a..7ef51251636de9bf7946756fc8d7d6bd7f8bb9f5 100644 (file)
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -5,23 +5,7 @@
  *   Author: Andre Renaud <andre@bluewatersys.com>
  *   Author: Ryan Mallon <ryan@bluewatersys.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -36,11 +20,9 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
-#define CONFIG_SYS_HZ                  1000
 
 /* CPU */
 #define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ
 
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -75,7 +57,6 @@
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R
 #define CONFIG_TFTP_PORT
@@ -83,6 +64,7 @@
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -92,7 +74,6 @@
 #define CONFIG_USB_STORAGE
 
 /* GPIOs and IO expander */
-#define CONFIG_AT91_LEGACY
 #define CONFIG_ATMEL_LEGACY
 #define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP                1
@@ -105,15 +86,14 @@
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {115200 , 19200, 38400, 57600, 9600 }
 #define CONFIG_SYS_PROMPT              "Snapper> "
 
 /* I2C - Bit-bashed */
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0x7F
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
 #define I2C_INIT do {                                                  \
                at91_set_gpio_output(AT91_PIN_PA23, 1);                 \
                at91_set_gpio_output(AT91_PIN_PA24, 1);                 \
@@ -158,15 +138,12 @@
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE +            \
                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_EXTBDINFO
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 /* U-Boot memory settings */
 #define CONFIG_SYS_MALLOC_LEN          (1 << 20)
-#define CONFIG_STACKSIZE               (256 << 10)
 
 /* Command line configuration */
 #include <config_cmd_default.h>