* (C) Copyright 2009
* Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SPEAR_COMMON_H
* Common configurations used for both spear3xx as well as spear6xx
*/
+/* U-boot Load Address */
+#define CONFIG_SYS_TEXT_BASE 0x00700000
+
+/* Ethernet driver configuration */
+#define CONFIG_MII
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_NET_MULTI
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+
/* USBD driver configuration */
+#if defined(CONFIG_SPEAR_USBTTY)
#define CONFIG_DW_UDC
#define CONFIG_USB_DEVICE
+#define CONFIG_USBD_HS
#define CONFIG_USB_TTY
#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
-#if defined(CONFIG_USB_TTY)
-#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
#endif
+#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
+
/* I2C driver configuration */
#define CONFIG_HARD_I2C
#define CONFIG_DW_I2C
+#if defined(CONFIG_SPEAR600)
+#define CONFIG_SYS_I2C_BASE 0xD0200000
+#elif defined(CONFIG_SPEAR300)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#elif defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#endif
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x02
#define CONFIG_I2C_CHIPADDRESS 0x50
/* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ (1000)
-#define CONFIG_SYS_HZ_CLOCK (8300000)
/* Flash configuration */
#if defined(CONFIG_FLASH_PNOR)
-#define CONFIG_SPEAR_EMI 1
+#define CONFIG_SPEAR_EMI
#else
-#define CONFIG_SPEARSMI 1
+#define CONFIG_ST_SMI
#endif
-#if defined(CONFIG_SPEARSMI)
+#if defined(CONFIG_ST_SMI)
#define CONFIG_SYS_MAX_FLASH_BANKS 2
-#define CONFIG_SYS_FLASH_BASE (0xF8000000)
-#define CONFIG_SYS_CS1_FLASH_BASE (0xF9000000)
-#define CONFIG_SYS_FLASH_BANK_SIZE (0x01000000)
+#define CONFIG_SYS_FLASH_BASE 0xF8000000
+#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000
+#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
CONFIG_SYS_CS1_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_SECT 128
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/* NAND FLASH Configuration */
+#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
-#define CONFIG_NAND_SPEAR 1
+#define CONFIG_NAND_FSMC
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_MTD_NAND_VERIFY_WRITE 1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_QUIET_TEST
/*
* Command support defines
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_RUN
#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <config_cmd_default.h>
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
/*
* Default Environment Varible definitions
* U-Boot Environment placing definitions.
*/
#if defined(CONFIG_ENV_IS_IN_FLASH)
-#ifdef CONFIG_SPEARSMI
+#ifdef CONFIG_ST_SMI
/*
* Environment is in serial NOR flash
*/
#define CONFIG_SYS_MONITOR_LEN 0x00040000
#define CONFIG_ENV_SECT_SIZE 0x00010000
-#define CONFIG_FSMTDBLK "/dev/mtdblock8 "
+#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
#define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
"0x4C0000; bootm 0x1600000"
#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
CONFIG_SYS_MONITOR_LEN)
#elif defined(CONFIG_ENV_IS_IN_NAND)
/*
#define CONFIG_ENV_OFFSET 0x60000
#define CONFIG_ENV_RANGE 0x10000
-#define CONFIG_FSMTDBLK "/dev/mtdblock12 "
+#define CONFIG_FSMTDBLK "/dev/mtdblock7 "
#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
"0x80000 0x4C0000; " \
"bootm 0x1600000"
#endif
-#define CONFIG_BOOTARGS_NFS "root=/dev/nfs ip=dhcp " \
- "console=ttyS0 init=/bin/sh"
-#define CONFIG_BOOTARGS "console=ttyS0 mem=128M " \
+#define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \
+ "mem=128M " \
"root="CONFIG_FSMTDBLK \
"rootfstype=jffs2"
+#define CONFIG_NFSBOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):" \
+ "$(netmask):$(hostname):$(netdev):off " \
+ "console=ttyAMA0,115200 $(othbootargs);" \
+ "bootm; "
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=ttyAMA0,115200 $(othbootargs);" \
+ CONFIG_BOOTCOMMAND
+
+
#define CONFIG_ENV_SIZE 0x02000
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* Miscellaneous configurable options */
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK 1
-#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_MISC_INIT_R
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_STOP_STR " "
#define CONFIG_AUTOBOOT_PROMPT \
"Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x00800000
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
-/* Stack sizes */
-#define CONFIG_STACKSIZE (128*1024)
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024)
-#define CONFIG_STACKSIZE_FIQ (4*1024)
-#endif
+#define CONFIG_SYS_FLASH_EMPTY_INFO
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
projects / karo-tx-uboot.git / blobdiff