karo: tx6: enable GPT command

[karo-tx-uboot.git] / include / configs / taurus.h

diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index c98002317fe238251ead9dd864288c0b6cdf1bb2..2c9f5da55ad4d9db88ee1ca6091e3ff6c5609e04 100644 (file)
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -21,9 +21,13 @@
  */
 #include <asm/hardware.h>
 
-#define MACH_TYPE_TAURUS               2067
-#define MACH_TYPE_AXM                  2068
+#define CONFIG_SYS_GENERIC_BOARD
 
+#if defined(CONFIG_SPL_BUILD)
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#endif
 /*
  * Warning: changing CONFIG_SYS_TEXT_BASE requires
  * adapting the initial boot program.
@@ -32,12 +36,11 @@
  */
 
 
-#define CONFIG_SYS_TEXT_BASE           0x23f00000
+#define CONFIG_SYS_TEXT_BASE           0x21000000
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000        /* main clock xtal */
-#define CONFIG_SYS_HZ                  1000
 
 /* Misc CPU related */
 #define CONFIG_ARCH_CPU_INIT
@@ -67,14 +70,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
@@ -115,6 +110,12 @@
 #define CONFIG_RMII
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
+#define CONFIG_AT91SAM9_WATCHDOG
+#if !defined(CONFIG_SPL_BUILD)
+/* Enable the watchdog */
+#define CONFIG_HW_WATCHDOG
+#endif
+
 /* USB */
 #if defined(CONFIG_BOARD_TAURUS)
 #define CONFIG_USB_ATMEL
@@ -126,6 +127,28 @@
 #define CONFIG_USB_STORAGE
 #endif
 
+/* SPI EEPROM */
+#define CONFIG_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_SPI_FLASH_STMICRO
+#define TAURUS_SPI_MASK (1 << 4)
+#define TAURUS_SPI_CS_PIN      AT91_PIN_PA3
+
+#if defined(CONFIG_SPL_BUILD)
+/* SPL related */
+#undef CONFIG_SPL_OS_BOOT              /* Not supported by existing map */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#endif
+
 /* load address */
 #define CONFIG_SYS_LOAD_ADDR                   0x22000000
 
@@ -142,7 +165,6 @@
        "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
        "root=/dev/mtdblock7 rw rootfstype=jffs2"
 
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE \
@@ -157,4 +179,57 @@
 #define CONFIG_SYS_MALLOC_LEN \
        ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x0
+#define CONFIG_SPL_MAX_SIZE            (14 * 1024)
+#define CONFIG_SPL_STACK               (16 * 1024)
+#define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
+                                       CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
+
+#define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_BSS_MAX_SIZE                (3 * 1024)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_USE_NANDFLASH       1
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_RAW_ONLY
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x20000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
+#define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+#define CONFIG_SYS_NAND_SIZE           (256*1024*1024)
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
+                                        CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCSIZE                256
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_ECCPOS         { 40, 41, 42, 43, 44, 45, 46, 47, \
+                                         48, 49, 50, 51, 52, 53, 54, 55, \
+                                         56, 57, 58, 59, 60, 61, 62, 63, }
+
+
+#define CONFIG_SPL_ATMEL_SIZE
+#define CONFIG_SYS_MASTER_CLOCK                132096000
+#define AT91_PLL_LOCK_TIMEOUT          1000000
+#define CONFIG_SYS_AT91_PLLA           0x202A3F01
+#define CONFIG_SYS_MCKR                        0x1300
+#define CONFIG_SYS_MCKR_CSS            (0x02 | CONFIG_SYS_MCKR)
+#define CONFIG_SYS_AT91_PLLB           0x10193F05
 #endif