avr32: delete non generic board mimc200

[karo-tx-uboot.git] / include / configs / tqma6.h

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 3b188915c645b27fc2e180b056053590dfb081a4..6d7aea79ebdde386a1a67155667c6bde6d745652 100644 (file)
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -22,21 +22,22 @@
 
 /* #endif */
 
+/* place code in last 4 MiB of RAM */
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#define CONFIG_SYS_TEXT_BASE           0x2fc00000
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define CONFIG_SYS_TEXT_BASE           0x4fc00000
+#endif
+
 #include "mx6_common.h"
 
 #define PHYS_SDRAM_SIZE                        (512u * SZ_1M)
 #define PHYS_SDRAM_SIZE                        (1024u * SZ_1M)
 #endif
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 
-#define CONFIG_MXC_GPIO
 #define CONFIG_MXC_UART
 
 /* SPI */
@@ -84,15 +85,8 @@
 #define TQMA6_PFUZE100_I2C_BUS         2
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-
 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
@@ -108,17 +102,9 @@
 #define CONFIG_MXC_OCOTP
 #define CONFIG_CMD_FUSE
 
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -131,25 +117,9 @@
 #define CONFIG_TFTP_BLOCKSIZE  4096
 #define CONFIG_NFS_READ_SIZE   4096
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_ITEST
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_BOOTDELAY               3
-
-#define CONFIG_LOADADDR                        0x12000000
-
-/* place code in last 4 MiB of RAM */
-#define CONFIG_SYS_TEXT_BASE           0x2fc00000
-#define CONFIG_SYS_TEXT_BASE           0x4fc00000
-#endif
 
 #define CONFIG_ENV_SIZE                        (SZ_8K)
 /* Size of malloc() pool */
@@ -395,23 +365,6 @@
        "panicboot=echo No boot device !!! reset\0"                            \
        TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              512
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                        sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128u * SZ_1K)
 
 /* Physical Memory Map */
@@ -432,10 +385,6 @@
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /*
  * All the defines above are for the TQMa6 SoM
  *