Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'

[karo-tx-uboot.git] / include / configs / udoo.h

diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 78df071795a10ef601772d427d12126fa3ab834d..700e9c1b23c85de05ff73a510da31cd65a309d72 100644 (file)
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -9,9 +9,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include "mx6_common.h"
 #include <asm/arch/imx-regs.h>
 #include <asm/imx-common/gpio.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 
 #define CONFIG_MX6
 #define CONFIG_DISPLAY_CPUINFO
@@ -25,6 +26,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (2 * SZ_1M)
 
@@ -34,6 +37,34 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART2_BASE
 
+/* SATA Configs */
+
+#define CONFIG_CMD_SATA
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE     1
+#define CONFIG_DWC_AHSATA_PORT_ID      0
+#define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+/* Network support */
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE                    ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE             RGMII
+#define CONFIG_ETHPRIME                 "FEC"
+#define CONFIG_FEC_MXC_PHYADDR          6
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX              1
@@ -71,13 +102,13 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
-       "uimage=uImage\0" \
+       "image=zImage\0" \
        "console=ttymxc1\0" \
        "splashpos=m,m\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
        "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-       "fdt_addr=0x11000000\0" \
+       "fdt_addr=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "mmcdev=0\0" \
@@ -103,22 +134,22 @@
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source\0" \
-       "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
-                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "if test ${boot_fdt} = try; then " \
-                                       "bootm; " \
+                                       "bootz; " \
                                "else " \
                                        "echo WARN: Cannot load the DT; " \
                                "fi; " \
                        "fi; " \
                "else " \
-                       "bootm; " \
+                       "bootz; " \
                "fi;\0" \
        "netargs=setenv bootargs console=${console},${baudrate} " \
                "root=/dev/nfs " \
@@ -130,19 +161,19 @@
                "else " \
                        "setenv get_cmd tftp; " \
                "fi; " \
-               "${get_cmd} ${uimage}; " \
+               "${get_cmd} ${image}; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "if test ${boot_fdt} = try; then " \
-                                       "bootm; " \
+                                       "bootz; " \
                                "else " \
                                        "echo WARN: Cannot load the DT; " \
                                "fi; " \
                        "fi; " \
                "else " \
-                       "bootm; " \
+                       "bootz; " \
                "fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -150,7 +181,7 @@
                   "if run loadbootscript; then " \
                           "run bootscript; " \
                   "else " \
-                          "if run loaduimage; then " \
+                          "if run loadimage; then " \
                                   "run mmcboot; " \
                           "else run netboot; " \
                           "fi; " \
@@ -170,7 +201,6 @@
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_CMDLINE_EDITING