karo: cleanup after merge of v2015.10-rc2

[karo-tx-uboot.git] / include / configs / wandboard.h

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 4db6d8febf5f1e4eddf7cb9544f0c6a83138837d..f4e9cf20c53c3520758b8d7dd4fde6e80351c55d 100644 (file)
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -27,22 +27,11 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
 /* Command definition */
-
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_BOOTDELAY               5
 
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-#define CONFIG_LOADADDR                        0x12000000
-#define CONFIG_SYS_TEXT_BASE           0x17800000
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
@@ -52,19 +41,9 @@
 #define CONFIG_SYS_I2C_SPEED           100000
 
 /* MMC Configuration */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
@@ -78,7 +57,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -106,11 +84,6 @@
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
@@ -125,7 +98,7 @@
        "ip_dyn=yes\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
        "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
+       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
        "update_sd_firmware_filename=u-boot.imx\0" \
        "update_sd_firmware=" \
                "if test ${ip_dyn} = yes; then " \
@@ -214,10 +187,14 @@
                        "bootz; " \
                "fi;\0" \
        "findfdt="\
-               "if test $board_rev = MX6Q ; then " \
+               "if test $board_name = C1 && test $board_rev = MX6Q ; then " \
                        "setenv fdtfile imx6q-wandboard.dtb; fi; " \
-               "if test $board_rev = MX6DL ; then " \
+               "if test $board_name = C1 && test $board_rev = MX6DL ; then " \
                        "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
+               "if test $board_name = B1 && test $board_rev = MX6Q ; then " \
+                       "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
+               "if test $board_name = B1 && test $board_rev = MX6DL ; then " \
+                       "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
                "if test $fdtfile = undefined; then " \
                        "echo WARNING: Could not determine dtb to use; fi; \0" \
 
@@ -234,18 +211,6 @@
                   "fi; " \
           "else run netboot; fi"
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS            16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -266,11 +231,4 @@
 #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 #endif                        /* __CONFIG_H * */