Merge branch 'tx28-update' into tx28-bugfix

[karo-tx-uboot.git] / include / configs / whistler.h

diff --git a/include/configs/whistler.h b/include/configs/whistler.h
index 32357181556a1603fbd3dce3aad2860158cb510a..ff859644c36aa4c09f516458b648fcb3e22adcb3 100644 (file)
--- a/include/configs/whistler.h
+++ b/include/configs/whistler.h
@@ -2,56 +2,27 @@
  *  (C) Copyright 2010-2012
  *  NVIDIA Corporation <www.nvidia.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include "tegra20-common.h"
 
-/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE     tegra20-whistler
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
-
 /* High-level configuration options */
-#define V_PROMPT               "Tegra20 (Whistler) # "
-#define CONFIG_TEGRA20_BOARD_STRING    "NVIDIA Whistler"
+#define CONFIG_TEGRA_BOARD_STRING      "NVIDIA Whistler"
 
 /* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTA
-#define CONFIG_TEGRA20_UARTA_UAA_UAB
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_UAA_UAB
 #define CONFIG_SYS_NS16550_COM1                NV_PA_APB_UARTA_BASE
 
 #define CONFIG_MACH_TYPE               MACH_TYPE_WHISTLER
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* I2C */
-#define CONFIG_TEGRA_I2C
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS         4
-#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_CMD_I2C
 
 /* SD/MMC */
@@ -60,19 +31,14 @@
 #define CONFIG_TEGRA_MMC
 #define CONFIG_CMD_MMC
 
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
 /*
  * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
- * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If
+ * the user plugged the standard 8GB MoviNAND card into J29/HSMMC/POP. If
  * they didn't, the boot sector layout may be different. However, use of that
  * particular card is standard practice as far as I know.
  */
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MMC_ENV_DEV 0
 #define CONFIG_SYS_MMC_ENV_PART 2
 
@@ -87,9 +53,8 @@
 #define CONFIG_USB_ETHER_ASIX
 
 /* General networking support */
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */