karo: tx6: enable GPT command

[karo-tx-uboot.git] / include / configs / zmx25.h

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 072945ad4abab6bccb39587e1bbcfd5037b0aa08..d06917ef325b818ea893b4d3a0637ababd475a0c 100644 (file)
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -4,34 +4,22 @@
  *
  * Configuation settings for the zmx25 board
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
-#define CONFIG_MX25
-#define CONFIG_MX25_CLK32              32768   /* OSC32K frequency */
-#define CONFIG_SYS_HZ                  1000
+#include <asm/arch/imx-regs.h>
+
 #define CONFIG_SYS_TEXT_BASE           0xA0000000
 
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_SYS_TIMER_RATE          32768
+#define CONFIG_SYS_TIMER_COUNTER       \
+       (&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
+
 #define CONFIG_MACH_TYPE       MACH_TYPE_ZMX25
 /*
  * Environment settings
@@ -88,8 +76,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_CACHE
 
 /*
@@ -110,9 +96,9 @@
 #define CONFIG_USB_EHCI                        /* Enable EHCI USB support */
 #define CONFIG_USB_EHCI_MXC
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORT    2
-#define CONFIG_MXC_USB_PORTSC  0xC0000000
-#define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_MXC_USB_PORT    1
+#define CONFIG_MXC_USB_PORTSC  MXC_EHCI_MODE_SERIAL
+#define CONFIG_MXC_USB_FLAGS   (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
@@ -151,7 +137,6 @@
 #define CONFIG_SYS_MEMTEST_START       (PHYS_SDRAM + (512*1024))
 #define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM + PHYS_SDRAM_SIZE)
 
-#define CONFIG_SYS_PROMPT      "zmx25> "
 #define CONFIG_SYS_CBSIZE      256
 #define CONFIG_SYS_MAXARGS     16
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
@@ -162,10 +147,6 @@
 #define CONFIG_PREBOOT  ""
 
 #define CONFIG_BOOTDELAY       5
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR      "delaygs"
-#define CONFIG_AUTOBOOT_STOP_STR       "stopgs"
 
 /*
  * Size of malloc() pool