Merge branch 'tx28-update' into tx28-bugfix

[karo-tx-uboot.git] / include / configs / zynq-common.h

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 864528a5ea1b39e8b39e089b45837812bc731a82..e7ab50ad24c33b0a347cb08a6d9b8dc4f75be348 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -25,6 +25,11 @@
 # define CONFIG_SYS_PL310_BASE         0xf8f02000
 #endif
 
+#define ZYNQ_SCUTIMER_BASEADDR         0xF8F00600
+#define CONFIG_SYS_TIMERBASE           ZYNQ_SCUTIMER_BASEADDR
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+#define CONFIG_SYS_TIMER_COUNTER       (CONFIG_SYS_TIMERBASE + 0x4)
+
 /* Serial drivers */
 #define CONFIG_BAUDRATE                115200
 /* The following table includes the supported baudrates */
@@ -34,14 +39,15 @@
 /* DCC driver */
 #if defined(CONFIG_ZYNQ_DCC)
 # define CONFIG_ARM_DCC
-# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
 #else
 # define CONFIG_ZYNQ_SERIAL
 #endif
 
+#define CONFIG_ZYNQ_GPIO
+#define CONFIG_CMD_GPIO
+
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
-# define CONFIG_NET_MULTI
 # define CONFIG_ZYNQ_GEM
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
@@ -62,7 +68,6 @@
 
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
 # define CONFIG_SPI_FLASH_SST
 # define CONFIG_CMD_SF
 #endif
@@ -105,10 +110,10 @@
 # define CONFIG_CI_UDC           /* ChipIdea CI13xxx UDC */
 # define CONFIG_USB_GADGET
 # define CONFIG_USB_GADGET_DUALSPEED
-# define CONFIG_USBDOWNLOAD_GADGET
+# define CONFIG_USB_GADGET_DOWNLOAD
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE  0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT      300
-# define CONFIG_DFU_FUNCTION
+# define CONFIG_USB_FUNCTION_DFU
 # define CONFIG_DFU_RAM
 # define CONFIG_USB_GADGET_VBUS_DRAW   2
 # define CONFIG_G_DNL_VENDOR_NUM       0x03FD
@@ -118,7 +123,7 @@
 # define CONFIG_USB_CABLE_CHECK
 # define CONFIG_CMD_DFU
 # define CONFIG_CMD_THOR_DOWNLOAD
-# define CONFIG_THOR_FUNCTION
+# define CONFIG_USB_FUNCTION_THOR
 # define DFU_ALT_INFO_RAM \
        "dfu_ram_info=" \
        "set dfu_alt_info " \
@@ -198,7 +203,6 @@
 
 # define CONFIG_ENV_SECT_SIZE          CONFIG_ENV_SIZE
 # define CONFIG_ENV_OFFSET             0xE0000
-# define CONFIG_CMD_SAVEENV
 #endif
 
 /* Default environment */
@@ -231,7 +235,6 @@
 #define CONFIG_SYS_LOAD_ADDR           0 /* default? */
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT              "zynq-uboot> "
 #define CONFIG_SYS_HUSH_PARSER
 
 #define CONFIG_CMDLINE_EDITING
@@ -255,7 +258,7 @@
 #define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x1000)
 
-#define CONFIG_SYS_MALLOC_LEN          0xC00000
+#define CONFIG_SYS_MALLOC_LEN          0x1400000
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
@@ -266,7 +269,6 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA
 #define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_FPGA_LOADP
 #define CONFIG_CMD_FPGA_LOADBP
@@ -291,11 +293,9 @@
 # define CONFIG_SYS_MMC_MAX_DEVICE     1
 #endif
 
-#define CONFIG_SYS_LDSCRIPT  "arch/arm/cpu/armv7/zynq/u-boot.lds"
+#define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"
 
 /* Commands */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
@@ -309,7 +309,7 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 
-#define CONFIG_SPL_LDSCRIPT    "arch/arm/cpu/armv7/zynq/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT    "arch/arm/mach-zynq/u-boot-spl.lds"
 
 /* MMC support */
 #ifdef CONFIG_ZYNQ_SDHCI0
@@ -319,7 +319,7 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 #endif
 
 /* Disable dcache for SPL just for sure */