typedef struct
{
- unsigned long freqProcessor;
- unsigned long freqSystemBus;
+ unsigned long freq_processor[CONFIG_MAX_CPUS];
+ unsigned long freq_systembus;
+ unsigned long freq_ddrbus;
+ unsigned long freq_localbus;
+ unsigned long freq_qe;
+#ifdef CONFIG_SYS_DPAA_FMAN
+ unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
+#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ unsigned long freq_qman;
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ unsigned long freq_pme;
+#endif
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+ unsigned char diff_sysclk;
+#endif
} MPC85xx_SYS_INFO;
#endif /* _ASMLANGUAGE */
-/* Motorola E500 core provides 16 TLB1 entries; they can be used for
- * initial memory mapping like legacy BAT registers do. Usually we
- * use four MAS registers(MAS0-3) to operate on TLB1 entries.
- *
- * We also need LAWs(Local Access Window) to associate a range of
- * the local 32-bit address space with a particular target interface
- * such as PCI/PCI-X, RapidIO, Local Bus and DDR SDRAM.
- *
- * We put TLB1/LAW code here because memory mapping is board-specific
- * instead of cpu-specific.
- */
-
-/* MAS0
- * tlbsel(TLB Select):0,1
- * esel(Entry Select): 0,1,2,...,15 for TLB1
- * nv(Next victim):0,1
- */
-#define TLB1_MAS0(tlbsel,esel,nv) \
- ((((tlbsel) << 28) & MAS0_TLBSEL) |\
- (((esel) << 16) & MAS0_ESEL ) |\
- (nv) )
-
-
-/* MAS1
- * v(TLB valid bit):0,1
- * iprot(invalidate protect):0,1
- * tid(translation identity):8bit to match process IDs
- * ts(translation space,comparing with MSR[IS,DS]): 0,1
- * tsize(translation size):1,2,...,9(4K,16K,64K,256K,1M,4M,16M,64M,256M)
- */
-#define TLB1_MAS1(v,iprot,tid,ts,tsize) \
- ((((v) << 31) & MAS1_VALID) |\
- (((iprot) << 30) & MAS1_IPROT) |\
- (((tid) << 16) & MAS1_TID) |\
- (((ts) << 12) & MAS1_TS) |\
- (((tsize) << 8) & MAS1_TSIZE) )
-
-
-/* MAS2
- * epn(effective page number):20bits
- * sharen(Shared cache state):0,1
- * x0,x1(implementation specific page attribute):0,1
- * w,i,m,g,e(write-through,cache-inhibited,memory coherency,guarded,
- * endianness):0,1
- */
-#define TLB1_MAS2(epn,sharen,x0,x1,w,i,m,g,e) \
- ((((epn) << 12) & MAS2_EPN) |\
- (((sharen) << 9) & MAS2_SHAREN) |\
- (((x0) << 6) & MAS2_X0) |\
- (((x1) << 5) & MAS2_X1) |\
- (((w) << 4) & MAS2_W) |\
- (((i) << 3) & MAS2_I) |\
- (((m) << 2) & MAS2_M) |\
- (((g) << 1) & MAS2_G) |\
- (e) )
-
-
-/* MAS3
- * rpn(real page number):20bits
- * u0-u3(user bits, useful for page table management in OS):0,1
- * ux,sx,uw,sw,ur,sr(permission bits, user and supervisor read,
- * write,execute permission).
- */
-#define TLB1_MAS3(rpn,u0,u1,u2,u3,ux,sx,uw,sw,ur,sr) \
- ((((rpn) << 12) & MAS3_RPN) |\
- (((u0) << 9) & MAS3_U0) |\
- (((u1) << 8) & MAS3_U1) |\
- (((u2) << 7) & MAS3_U2) |\
- (((u3) << 6) & MAS3_U3) |\
- (((ux) << 5) & MAS3_UX) |\
- (((sx) << 4) & MAS3_SX) |\
- (((uw) << 3) & MAS3_UW) |\
- (((sw) << 2) & MAS3_SW) |\
- (((ur) << 1) & MAS3_UR) |\
- (sr) )
-
-
#define RESET_VECTOR 0xfffffffc
-#define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for cache
- line aligned data. */
#endif /* __E500_H__ */
projects / karo-tx-uboot.git / blobdiff