* MA 02111-1307 USA
*/
+#ifndef __fdtdec_h
+#define __fdtdec_h
/*
* This file contains convenience functions for decoding useful and
typedef u64 fdt_addr_t;
#define FDT_ADDR_T_NONE (-1ULL)
#define fdt_addr_to_cpu(reg) be64_to_cpu(reg)
+#define fdt_size_to_cpu(reg) be64_to_cpu(reg)
#else
typedef u32 fdt_addr_t;
#define FDT_ADDR_T_NONE (-1U)
#define fdt_addr_to_cpu(reg) be32_to_cpu(reg)
+#define fdt_size_to_cpu(reg) be32_to_cpu(reg)
#endif
/* Information obtained about memory from the FDT */
*/
enum fdt_compat_id {
COMPAT_UNKNOWN,
+ COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */
+ COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */
+ COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */
+ COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */
+ COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */
+ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */
+ COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */
+ COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */
+ COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */
COMPAT_COUNT,
};
+/* GPIOs are numbered from 0 */
+enum {
+ FDT_GPIO_NONE = -1U, /* an invalid GPIO used to end our list */
+
+ FDT_GPIO_ACTIVE_LOW = 1 << 0, /* input is active low (else high) */
+};
+
+/* This is the state of a GPIO pin as defined by the fdt */
+struct fdt_gpio_state {
+ const char *name; /* name of the fdt property defining this */
+ uint gpio; /* GPIO number, or FDT_GPIO_NONE if none */
+ u8 flags; /* FDT_GPIO_... flags */
+};
+
+/* This tells us whether a fdt_gpio_state record is valid or not */
+#define fdt_gpio_isvalid(x) ((x)->gpio != FDT_GPIO_NONE)
+
+/**
+ * Read the GPIO taking into account the polarity of the pin.
+ *
+ * @param gpio pointer to the decoded gpio
+ * @return value of the gpio if successful, < 0 if unsuccessful
+ */
+int fdtdec_get_gpio(struct fdt_gpio_state *gpio);
+
+/**
+ * Write the GPIO taking into account the polarity of the pin.
+ *
+ * @param gpio pointer to the decoded gpio
+ * @return 0 if successful
+ */
+int fdtdec_set_gpio(struct fdt_gpio_state *gpio, int val);
+
/**
* Find the next numbered alias for a peripheral. This is used to enumerate
* all the peripherals of a certain type.
int fdtdec_next_alias(const void *blob, const char *name,
enum fdt_compat_id id, int *upto);
+/**
+ * Find the compatible ID for a given node.
+ *
+ * Generally each node has at least one compatible string attached to it.
+ * This function looks through our list of known compatible strings and
+ * returns the corresponding ID which matches the compatible string.
+ *
+ * @param blob FDT blob to use
+ * @param node Node containing compatible string to find
+ * @return compatible ID, or COMPAT_UNKNOWN if we cannot find a match
+ */
+enum fdt_compat_id fdtdec_lookup(const void *blob, int node);
+
/**
* Find the next compatible node for a peripheral.
*
int fdtdec_next_compatible(const void *blob, int node,
enum fdt_compat_id id);
+/**
+ * Find the next compatible subnode for a peripheral.
+ *
+ * Do the first call with node set to the parent and depth = 0. This
+ * function will return the offset of the next compatible node. Next time
+ * you call this function, pass the node value returned last time, with
+ * depth unchanged, and the next node will be provided.
+ *
+ * @param blob FDT blob to use
+ * @param node Start node for search
+ * @param id Compatible ID to look for (enum fdt_compat_id)
+ * @param depthp Current depth (set to 0 before first call)
+ * @return offset of next compatible node, or -FDT_ERR_NOTFOUND if no more
+ */
+int fdtdec_next_compatible_subnode(const void *blob, int node,
+ enum fdt_compat_id id, int *depthp);
+
/**
* Look up an address property in a node and return it as an address.
* The property must hold either one address with no trailing data or
s32 fdtdec_get_int(const void *blob, int node, const char *prop_name,
s32 default_val);
+/**
+ * Look up a 64-bit integer property in a node and return it. The property
+ * must have at least 8 bytes of data (2 cells). The first two cells are
+ * concatenated to form a 8 bytes value, where the first cell is top half and
+ * the second cell is bottom half.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param default_val default value to return if the property is not found
+ * @return integer value, if found, or default_val if not
+ */
+uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name,
+ uint64_t default_val);
+
/**
* Checks whether a node is enabled.
* This looks for a 'status' property. If this exists, then returns 1 if
int fdtdec_get_is_enabled(const void *blob, int node);
/**
- * Checks whether we have a valid fdt available to control U-Boot, and panic
- * if not.
+ * Make sure we have a valid fdt available to control U-Boot.
+ *
+ * If not, a message is printed to the console if the console is ready.
+ *
+ * @return 0 if all ok, -1 if not
+ */
+int fdtdec_prepare_fdt(void);
+
+/**
+ * Checks that we have a valid fdt available to control U-Boot.
+
+ * However, if not then for the moment nothing is done, since this function
+ * is called too early to panic().
+ *
+ * @returns 0
*/
int fdtdec_check_fdt(void);
int fdtdec_find_aliases_for_id(const void *blob, const char *name,
enum fdt_compat_id id, int *node_list, int maxcount);
+/*
+ * This function is similar to fdtdec_find_aliases_for_id() except that it
+ * adds to the node_list that is passed in. Any 0 elements are considered
+ * available for allocation - others are considered already used and are
+ * skipped.
+ *
+ * You can use this by calling fdtdec_find_aliases_for_id() with an
+ * uninitialised array, then setting the elements that are returned to -1,
+ * say, then calling this function, perhaps with a different compat id.
+ * Any elements you get back that are >0 are new nodes added by the call
+ * to this function.
+ *
+ * Note that if you have some nodes with aliases and some without, you are
+ * sailing close to the wind. The call to fdtdec_find_aliases_for_id() with
+ * one compat_id may fill in positions for which you have aliases defined
+ * for another compat_id. When you later call *this* function with the second
+ * compat_id, the alias positions may already be used. A debug warning may
+ * be generated in this case, but it is safest to define aliases for all
+ * nodes when you care about the ordering.
+ */
+int fdtdec_add_aliases_for_id(const void *blob, const char *name,
+ enum fdt_compat_id id, int *node_list, int maxcount);
+
/*
* Get the name for a compatible ID
*
int fdtdec_get_int_array(const void *blob, int node, const char *prop_name,
u32 *array, int count);
+/**
+ * Look up a property in a node and return a pointer to its contents as a
+ * unsigned int array of given length. The property must have at least enough
+ * data for the array ('count' cells). It may have more, but this will be
+ * ignored. The data is not copied.
+ *
+ * Note that you must access elements of the array with fdt32_to_cpu(),
+ * since the elements will be big endian even on a little endian machine.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param count number of array elements
+ * @return pointer to array if found, or NULL if the property is not
+ * found or there is not enough data
+ */
+const u32 *fdtdec_locate_array(const void *blob, int node,
+ const char *prop_name, int count);
+
/**
* Look up a boolean property in a node and return it.
*
* @return 1 if the properly is present; 0 if it isn't present
*/
int fdtdec_get_bool(const void *blob, int node, const char *prop_name);
+
+/**
+ * Decode a single GPIOs from an FDT.
+ *
+ * If the property is not found, then the GPIO structure will still be
+ * initialised, with gpio set to FDT_GPIO_NONE. This makes it easy to
+ * provide optional GPIOs.
+ *
+ * @param blob FDT blob to use
+ * @param node Node to look at
+ * @param prop_name Node property name
+ * @param gpio gpio elements to fill from FDT
+ * @return 0 if ok, -FDT_ERR_NOTFOUND if the property is missing.
+ */
+int fdtdec_decode_gpio(const void *blob, int node, const char *prop_name,
+ struct fdt_gpio_state *gpio);
+
+/**
+ * Decode a list of GPIOs from an FDT. This creates a list of GPIOs with no
+ * terminating item.
+ *
+ * @param blob FDT blob to use
+ * @param node Node to look at
+ * @param prop_name Node property name
+ * @param gpio Array of gpio elements to fill from FDT. This will be
+ * untouched if either 0 or an error is returned
+ * @param max_count Maximum number of elements allowed
+ * @return number of GPIOs read if ok, -FDT_ERR_BADLAYOUT if max_count would
+ * be exceeded, or -FDT_ERR_NOTFOUND if the property is missing.
+ */
+int fdtdec_decode_gpios(const void *blob, int node, const char *prop_name,
+ struct fdt_gpio_state *gpio, int max_count);
+
+/**
+ * Set up a GPIO pin according to the provided gpio information. At present this
+ * just requests the GPIO.
+ *
+ * If the gpio is FDT_GPIO_NONE, no action is taken. This makes it easy to
+ * deal with optional GPIOs.
+ *
+ * @param gpio GPIO info to use for set up
+ * @return 0 if all ok or gpio was FDT_GPIO_NONE; -1 on error
+ */
+int fdtdec_setup_gpio(struct fdt_gpio_state *gpio);
+
+/**
+ * Look in the FDT for a config item with the given name and return its value
+ * as a 32-bit integer. The property must have at least 4 bytes of data. The
+ * value of the first cell is returned.
+ *
+ * @param blob FDT blob to use
+ * @param prop_name Node property name
+ * @param default_val default value to return if the property is not found
+ * @return integer value, if found, or default_val if not
+ */
+int fdtdec_get_config_int(const void *blob, const char *prop_name,
+ int default_val);
+
+/**
+ * Look in the FDT for a config item with the given name
+ * and return whether it exists.
+ *
+ * @param blob FDT blob
+ * @param prop_name property name to look up
+ * @return 1, if it exists, or 0 if not
+ */
+int fdtdec_get_config_bool(const void *blob, const char *prop_name);
+
+/**
+ * Look in the FDT for a config item with the given name and return its value
+ * as a string.
+ *
+ * @param blob FDT blob
+ * @param prop_name property name to look up
+ * @returns property string, NULL on error.
+ */
+char *fdtdec_get_config_string(const void *blob, const char *prop_name);
+
+/*
+ * Look up a property in a node and return its contents in a byte
+ * array of given length. The property must have at least enough data for
+ * the array (count bytes). It may have more, but this will be ignored.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param array array to fill with data
+ * @param count number of array elements
+ * @return 0 if ok, or -FDT_ERR_MISSING if the property is not found,
+ * or -FDT_ERR_BADLAYOUT if not enough data
+ */
+int fdtdec_get_byte_array(const void *blob, int node, const char *prop_name,
+ u8 *array, int count);
+
+/**
+ * Look up a property in a node and return a pointer to its contents as a
+ * byte array of given length. The property must have at least enough data
+ * for the array (count bytes). It may have more, but this will be ignored.
+ * The data is not copied.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param count number of array elements
+ * @return pointer to byte array if found, or NULL if the property is not
+ * found or there is not enough data
+ */
+const u8 *fdtdec_locate_byte_array(const void *blob, int node,
+ const char *prop_name, int count);
+
+/**
+ * Look up a property in a node which contains a memory region address and
+ * size. Then return a pointer to this address.
+ *
+ * The property must hold one address with a length. This is only tested on
+ * 32-bit machines.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param ptrp returns pointer to region, or NULL if no address
+ * @param size returns size of region
+ * @return 0 if ok, -1 on error (propery not found)
+ */
+int fdtdec_decode_region(const void *blob, int node,
+ const char *prop_name, void **ptrp, size_t *size);
+#endif
projects / karo-tx-uboot.git / blobdiff