karo: tx6: add support for TXUL-5014

[karo-tx-uboot.git] / include / ide.h

diff --git a/include/ide.h b/include/ide.h
index 80a10f41023d8ad82ff046fe1352fc57fe298c10..d5e05e97cb2fb12dc68794a2f1032eb366c79f18 100644 (file)
--- a/include/ide.h
+++ b/include/ide.h
@@ -2,31 +2,16 @@
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef        _IDE_H
 #define _IDE_H
 
-#define        IDE_BUS(dev)    (dev >> 1)
+#define IDE_BUS(dev)   (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS))
 
 #define        ATA_CURR_BASE(dev)      (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+extern ulong ide_bus_offset[];
 
 #ifdef CONFIG_IDE_LED
 
@@ -38,12 +23,17 @@
 #define LED_IDE2       0x02
 #define        DEVICE_LED(d)   ((d & 2) | ((d & 2) == 0)) /* depends on bit positions! */
 
+void ide_led(uchar led, uchar status);
 #endif /* CONFIG_IDE_LED */
 
 #ifdef CONFIG_SYS_64BIT_LBA
 typedef uint64_t lbaint_t;
+#define LBAF "%llx"
+#define LBAFU "%llu"
 #else
 typedef ulong lbaint_t;
+#define LBAF "%lx"
+#define LBAFU "%lu"
 #endif
 
 /*
@@ -51,8 +41,17 @@ typedef ulong lbaint_t;
  */
 
 void ide_init(void);
-ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer);
-ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, void *buffer);
+ulong ide_read(int device, lbaint_t blknr, lbaint_t blkcnt, void *buffer);
+ulong ide_write(int device, lbaint_t blknr, lbaint_t blkcnt,
+               const void *buffer);
+
+#ifdef CONFIG_IDE_PREINIT
+int ide_preinit(void);
+#endif
+
+#ifdef CONFIG_IDE_INIT_POSTRESET
+int ide_init_postreset(void);
+#endif
 
 #if defined(CONFIG_OF_IDE_FIXUP)
 int ide_device_present(int dev);
@@ -62,6 +61,27 @@ int ide_device_present(int dev);
 unsigned char ide_read_register(int dev, unsigned int port);
 void ide_write_register(int dev, unsigned int port, unsigned char val);
 void ide_read_data(int dev, ulong *sect_buf, int words);
-void ide_write_data(int dev, ulong *sect_buf, int words);
+void ide_write_data(int dev, const ulong *sect_buf, int words);
 #endif
+
+/*
+ * I/O function overrides
+ */
+unsigned char ide_inb(int dev, int port);
+void ide_outb(int dev, int port, unsigned char val);
+void ide_input_swap_data(int dev, ulong *sect_buf, int words);
+void ide_input_data(int dev, ulong *sect_buf, int words);
+void ide_output_data(int dev, const ulong *sect_buf, int words);
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts);
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts);
+
+void ide_led(uchar led, uchar status);
+
+/**
+ * board_start_ide() - Start up the board IDE interfac
+ *
+ * @return 0 if ok
+ */
+int board_start_ide(void);
+
 #endif /* _IDE_H */