Merge branch 'master' of git://git.denx.de/u-boot-microblaze

[karo-tx-uboot.git] / include / netdev.h

diff --git a/include/netdev.h b/include/netdev.h
index aed5c4cce31a636aaa7017c1c14cb5d72354c3fc..04d9f75b771d36b422539523285a20520cf9dc8d 100644 (file)
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -41,19 +41,36 @@ int board_eth_init(bd_t *bis);
 int cpu_eth_init(bd_t *bis);
 
 /* Driver initialization prototypes */
+int altera_tse_initialize(u8 dev_num, int mac_base,
+                         int sgdma_rx_base, int sgdma_tx_base,
+                         u32 sgdma_desc_base, u32 sgdma_desc_size);
+int at91emac_register(bd_t *bis, unsigned long iobase);
 int au1x00_enet_initialize(bd_t*);
+int ax88180_initialize(bd_t *bis);
 int bfin_EMAC_initialize(bd_t *bis);
-int dc21x4x_initialize(bd_t *bis);
+int cs8900_initialize(u8 dev_num, int base_addr);
 int davinci_emac_initialize(void);
+int dc21x4x_initialize(bd_t *bis);
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
+int dm9000_initialize(bd_t *bis);
 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int e1000_initialize(bd_t *bis);
 int eepro100_initialize(bd_t *bis);
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+       unsigned int max_hz, unsigned int mode);
+int ep93xx_eth_initialize(u8 dev_num, int base_addr);
 int eth_3com_initialize (bd_t * bis);
+int ethoc_initialize(u8 dev_num, int base_addr);
 int fec_initialize (bd_t *bis);
+int fecmxc_initialize(bd_t *bis);
+int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
+int ftgmac100_initialize(bd_t *bits);
+int ftmac100_initialize(bd_t *bits);
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int inca_switch_initialize(bd_t *bis);
-int kirkwood_egiga_initialize(bd_t *bis);
+int ks8695_eth_initialize(void);
+int lan91c96_initialize(u8 dev_num, int base_addr);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int mcdmafec_initialize(bd_t *bis);
 int mcffec_initialize(bd_t *bis);
@@ -61,6 +78,7 @@ int mpc512x_fec_initialize(bd_t *bis);
 int mpc5xxx_fec_initialize(bd_t *bis);
 int mpc8220_fec_initialize(bd_t *bis);
 int mpc82xx_scc_enet_initialize(bd_t *bis);
+int mvgbe_initialize(bd_t *bis);
 int natsemi_initialize(bd_t *bis);
 int npe_initialize(bd_t *bis);
 int ns8382x_initialize(bd_t *bis);
@@ -70,12 +88,18 @@ int ppc_4xx_eth_initialize (bd_t *bis);
 int rtl8139_initialize(bd_t *bis);
 int rtl8169_initialize(bd_t *bis);
 int scc_initialize(bd_t *bis);
+int sh_eth_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
+int smc91111_initialize(u8 dev_num, int base_addr);
+int smc911x_initialize(u8 dev_num, int base_addr);
 int tsi108_eth_initialize(bd_t *bis);
-int uec_initialize(int index);
+int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
-int sh_eth_initialize(bd_t *bis);
-int dm9000_initialize(bd_t *bis);
+int armada100_fec_register(unsigned long base_addr);
+int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
+                                                       unsigned long dma_addr);
+int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
+                                                       int txpp, int rxpp);
 
 /* Boards with PCI network controllers can call this from their board_eth_init()
  * function to initialize whatever's on board.
@@ -166,4 +190,9 @@ struct mv88e61xx_config {
 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
 #endif /* CONFIG_MV88E61XX_SWITCH */
 
+/*
+ * Allow FEC to fine-tune MII configuration on boards which require this.
+ */
+int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
+
 #endif /* _NETDEV_H_ */