* (C) Copyright 2008
* Benjamin Warren, biggerbadderben@gmail.com
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
int cpu_eth_init(bd_t *bis);
/* Driver initialization prototypes */
+int altera_tse_initialize(u8 dev_num, int mac_base,
+ int sgdma_rx_base, int sgdma_tx_base,
+ u32 sgdma_desc_base, u32 sgdma_desc_size);
+int at91emac_register(bd_t *bis, unsigned long iobase);
int au1x00_enet_initialize(bd_t*);
+int ax88180_initialize(bd_t *bis);
int bfin_EMAC_initialize(bd_t *bis);
+int calxedaxgmac_initialize(u32 id, ulong base_addr);
+int cs8900_initialize(u8 dev_num, int base_addr);
+int davinci_emac_initialize(void);
int dc21x4x_initialize(bd_t *bis);
+int designware_initialize(ulong base_addr, u32 interface);
+int dm9000_initialize(bd_t *bis);
+int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
+int ethoc_initialize(u8 dev_num, int base_addr);
int fec_initialize (bd_t *bis);
+int fecmxc_initialize(bd_t *bis);
+int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
+int ftgmac100_initialize(bd_t *bits);
+int ftmac100_initialize(bd_t *bits);
+int ftmac110_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
-int inca_switch_initialize(bd_t *bis);
+int ks8695_eth_initialize(void);
+int ks8851_mll_initialize(u8 dev_num, int base_addr);
+int lan91c96_initialize(u8 dev_num, int base_addr);
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
int mcdmafec_initialize(bd_t *bis);
int mcffec_initialize(bd_t *bis);
int mpc512x_fec_initialize(bd_t *bis);
int mpc5xxx_fec_initialize(bd_t *bis);
-int mpc8220_fec_initialize(bd_t *bis);
int mpc82xx_scc_enet_initialize(bd_t *bis);
+int mvgbe_initialize(bd_t *bis);
int natsemi_initialize(bd_t *bis);
+int ne2k_register(void);
int npe_initialize(bd_t *bis);
int ns8382x_initialize(bd_t *bis);
int pcnet_initialize(bd_t *bis);
int rtl8139_initialize(bd_t *bis);
int rtl8169_initialize(bd_t *bis);
int scc_initialize(bd_t *bis);
+int sh_eth_initialize(bd_t *bis);
int skge_initialize(bd_t *bis);
+int smc91111_initialize(u8 dev_num, int base_addr);
+int smc911x_initialize(u8 dev_num, int base_addr);
+int sunxi_wemac_initialize(bd_t *bis);
int tsi108_eth_initialize(bd_t *bis);
-int uec_initialize(int index);
+int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
-int sh_eth_initialize(bd_t *bis);
+int armada100_fec_register(unsigned long base_addr);
+int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
+ unsigned long dma_addr);
+int xilinx_emaclite_of_init(const void *blob);
+int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
+ int txpp, int rxpp);
+int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
+ unsigned long ctrl_addr);
+int zynq_gem_of_init(const void *blob);
+int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio);
+/*
+ * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
+ * exported by a public hader file, we need a global definition at this point.
+ */
+#if defined(CONFIG_XILINX_LL_TEMAC)
+#define XILINX_LL_TEMAC_M_FIFO 0 /* use FIFO Ctrl */
+#define XILINX_LL_TEMAC_M_SDMA_PLB (1 << 0)/* use SDMA Ctrl via PLB */
+#define XILINX_LL_TEMAC_M_SDMA_DCR (1 << 1)/* use SDMA Ctrl via DCR */
+#endif
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
#if defined(CONFIG_RTL8169)
num += rtl8169_initialize(bis);
#endif
-#if defined(CONFIG_ULI526)
+#if defined(CONFIG_ULI526X)
num += uli526x_initialize(bis);
#endif
return num;
}
+/*
+ * Boards with mv88e61xx switch can use this by defining
+ * CONFIG_MV88E61XX_SWITCH in respective board configheader file
+ * the stuct and enums here are used to specify switch configuration params
+ */
+#if defined(CONFIG_MV88E61XX_SWITCH)
+
+/* constants for any 88E61xx switch */
+#define MV88E61XX_MAX_PORTS_NUM 6
+
+enum mv88e61xx_cfg_mdip {
+ MV88E61XX_MDIP_NOCHANGE,
+ MV88E61XX_MDIP_REVERSE
+};
+
+enum mv88e61xx_cfg_ledinit {
+ MV88E61XX_LED_INIT_DIS,
+ MV88E61XX_LED_INIT_EN
+};
+
+enum mv88e61xx_cfg_rgmiid {
+ MV88E61XX_RGMII_DELAY_DIS,
+ MV88E61XX_RGMII_DELAY_EN
+};
+
+enum mv88e61xx_cfg_prtstt {
+ MV88E61XX_PORTSTT_DISABLED,
+ MV88E61XX_PORTSTT_BLOCKING,
+ MV88E61XX_PORTSTT_LEARNING,
+ MV88E61XX_PORTSTT_FORWARDING
+};
+
+struct mv88e61xx_config {
+ char *name;
+ u8 vlancfg[MV88E61XX_MAX_PORTS_NUM];
+ enum mv88e61xx_cfg_rgmiid rgmii_delay;
+ enum mv88e61xx_cfg_prtstt portstate;
+ enum mv88e61xx_cfg_ledinit led_init;
+ enum mv88e61xx_cfg_mdip mdip;
+ u32 ports_enabled;
+ u8 cpuport;
+};
+
+/*
+ * Common mappings for Internal VLANs
+ * These mappings consider that all ports are useable; the driver
+ * will mask inexistent/unused ports.
+ */
+
+/* Switch mode : routes any port to any port */
+#define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F }
+
+/* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */
+#define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F }
+
+int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
+#endif /* CONFIG_MV88E61XX_SWITCH */
+
+struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
+#ifdef CONFIG_PHYLIB
+struct phy_device;
+int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
+ struct mii_dev *bus, struct phy_device *phydev);
+#else
+/*
+ * Allow FEC to fine-tune MII configuration on boards which require this.
+ */
+int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
+#endif
+
#endif /* _NETDEV_H_ */
projects / karo-tx-uboot.git / blobdiff