Update from 2013.01 to 2013.07

[karo-tx-uboot.git] / include / usb / fusbh200.h

diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h
new file mode 100644 (file)
index 0000000..e2d8553
--- /dev/null
+++ b/include/usb/fusbh200.h
@@ -0,0 +1,60 @@
+/*
+ * Faraday USB 2.0 EHCI Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _FUSBH200_H
+#define _FUSBH200_H
+
+struct fusbh200_regs {
+       struct {
+               uint32_t data[4];
+       } hccr;                 /* 0x00 - 0x0f: hccr */
+       struct {
+               uint32_t data[9];
+       } hcor;                 /* 0x10 - 0x33: hcor */
+       uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
+       uint32_t rsvd[2];
+       uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */
+       uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */
+       uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
+};
+
+/* EOF & Async. Schedule Sleep Timer Register */
+#define EASSTR_RUNNING  (1 << 6) /* Put transceiver in running/resume mode */
+#define EASSTR_SUSPEND  (0 << 6) /* Put transceiver in suspend mode */
+#define EASSTR_EOF2(x)  (((x) & 0x3) << 4) /* EOF 2 Timing */
+#define EASSTR_EOF1(x)  (((x) & 0x3) << 2) /* EOF 1 Timing */
+#define EASSTR_ASST(x)  (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
+
+/* Bus Monitor Control Status Register */
+#define BMCSR_SPD_HIGH  (2 << 9) /* Speed of the attached device */
+#define BMCSR_SPD_LOW   (1 << 9)
+#define BMCSR_SPD_FULL  (0 << 9)
+#define BMCSR_SPD_MASK  (3 << 9)
+#define BMCSR_SPD_SHIFT 9
+#define BMCSR_SPD(x)    ((x >> 9) & 0x03)
+#define BMCSR_VBUS      (1 << 8) /* VBUS Valid */
+#define BMCSR_VBUS_OFF  (1 << 4) /* VBUS Off */
+#define BMCSR_VBUS_ON   (0 << 4) /* VBUS On */
+#define BMCSR_IRQLH     (1 << 3) /* IRQ triggered at level-high */
+#define BMCSR_IRQLL     (0 << 3) /* IRQ triggered at level-low */
+#define BMCSR_HALFSPD   (1 << 2) /* Half speed mode for FPGA test */
+#define BMCSR_HFT_LONG  (1 << 1) /* HDISCON noise filter = 270 us*/
+#define BMCSR_HFT       (0 << 1) /* HDISCON noise filter = 135 us*/
+#define BMCSR_VFT_LONG  (1 << 1) /* VBUS noise filter = 472 us*/
+#define BMCSR_VFT       (0 << 1) /* VBUS noise filter = 135 us*/
+
+/* Bus Monitor Interrupt Status Register */
+/* Bus Monitor Interrupt Enable Register */
+#define BMISR_DMAERR    (1 << 4) /* DMA error */
+#define BMISR_DMA       (1 << 3) /* DMA complete */
+#define BMISR_DEVRM     (1 << 2) /* device removed */
+#define BMISR_OVD       (1 << 1) /* over-current detected */
+#define BMISR_VBUSERR   (1 << 0) /* VBUS error */
+
+#endif