X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=Makefile;h=107ee4f909af8c65a4ac738a7ccc7a5d90a9df44;hp=34d9075a3e4da71e2b0a6e45be5e2ba0a508bda0;hb=e5f5c4a977c411c0cd3899a4f9487eea77a0e150;hpb=198166877768cf4d0197289a524df8a6ca0e2f19

diff --git a/Makefile b/Makefile
index 34d9075a3e..107ee4f909 100644
--- a/Makefile
+++ b/Makefile
@@ -21,10 +21,10 @@
 # MA 02111-1307 USA
 #
 
-VERSION = 2012
-PATCHLEVEL = 10
+VERSION = 2013
+PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -92,6 +92,24 @@ BUILD_DIR := $(O)
 endif
 endif
 
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of re-compiled files.
+#
+# See the linux kernel file "Documentation/sparse.txt" for more details,
+# including where to get the "sparse" utility.
+
+ifdef C
+ifeq ("$(origin C)", "command line")
+CHECKSRC := $(C)
+endif
+endif
+ifndef CHECKSRC
+  CHECKSRC = 0
+endif
+export CHECKSRC
+
 ifneq ($(BUILD_DIR),)
 saved-output := $(BUILD_DIR)
 
@@ -213,8 +231,8 @@ endif
 
 OBJS  = $(CPUDIR)/start.o
 ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
 endif
 ifeq ($(CPU),ppc4xx)
 OBJS += $(CPUDIR)/resetvec.o
@@ -223,7 +241,7 @@ ifeq ($(CPU),mpc85xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS))
+OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
@@ -242,7 +260,9 @@ LIBS-y += drivers/net/npe/libnpe.o
 endif
 LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
 LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS-y += fs/cramfs/libcramfs.o \
+LIBS-y += fs/libfs.o \
+	fs/cbfs/libcbfs.o \
+	fs/cramfs/libcramfs.o \
 	fs/ext4/libext4fs.o \
 	fs/fat/libfat.o \
 	fs/fdos/libfdos.o \
@@ -273,7 +293,10 @@ LIBS-y += drivers/net/libnet.o
 LIBS-y += drivers/net/phy/libphy.o
 LIBS-y += drivers/pci/libpci.o
 LIBS-y += drivers/pcmcia/libpcmcia.o
-LIBS-y += drivers/power/libpower.o
+LIBS-y += drivers/power/libpower.o \
+	drivers/power/fuel_gauge/libfuel_gauge.o \
+	drivers/power/pmic/libpmic.o \
+	drivers/power/battery/libbattery.o
 LIBS-y += drivers/spi/libspi.o
 LIBS-y += drivers/dfu/libdfu.o
 ifeq ($(CPU),mpc83xx)
@@ -293,12 +316,14 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
 LIBS-y += drivers/rtc/librtc.o
 LIBS-y += drivers/serial/libserial.o
+LIBS-y += drivers/sound/libsound.o
 LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
 LIBS-y += drivers/twserial/libtws.o
 LIBS-y += drivers/usb/eth/libusb_eth.o
 LIBS-y += drivers/usb/gadget/libusb_gadget.o
 LIBS-y += drivers/usb/host/libusb_host.o
 LIBS-y += drivers/usb/musb/libusb_musb.o
+LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
 LIBS-y += drivers/usb/phy/libusb_phy.o
 LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
 LIBS-y += drivers/video/libvideo.o
@@ -323,8 +348,10 @@ endif
 ifeq ($(SOC),exynos)
 LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
+LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
+LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
 endif
 
 LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
@@ -364,12 +391,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 BOARD_SIZE_CHECK = \
 	@actual=`wc -c $@ | awk '{print $$1}'`; \
-	limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
 	if test $$actual -gt $$limit; then \
-		echo "$@ exceeds file size limit:"; \
-		echo "  limit:  $$limit bytes"; \
-		echo "  actual: $$actual bytes"; \
-		echo "  excess: $$((actual - limit)) bytes"; \
+		echo "$@ exceeds file size limit:" >&2 ; \
+		echo "  limit:  $$limit bytes" >&2 ; \
+		echo "  actual: $$actual bytes" >&2 ; \
+		echo "  excess: $$((actual - limit)) bytes" >&2; \
 		exit 1; \
 	fi
 else
@@ -382,10 +409,11 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
 
 # enable combined SPL/u-boot/dtb rules for tegra
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_OF_SEPARATE),y)
 ALL-y += $(obj)u-boot-dtb-tegra.bin
 else
@@ -423,16 +451,24 @@ $(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
 $(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
 $(obj)u-boot.img:	$(obj)u-boot.bin
 		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+		-e $(CONFIG_SYS_UBOOT_START) \
 		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
 
-$(obj)u-boot.imx:       $(obj)u-boot.bin
-		$(obj)tools/mkimage -n  $(CONFIG_IMX_CONFIG) -T imximage \
-		-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend
+		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
 
 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 		$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
@@ -449,14 +485,15 @@ $(obj)u-boot.sha1:	$(obj)u-boot.bin
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
-$(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
 		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
-		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-		-e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
-		rm $(obj)u-boot-ubl.bin
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
 		rm $(obj)spl/u-boot-spl-pad.bin
 
+$(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
+		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
+		-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
+
 $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 		$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
 			-T aisimage \
@@ -470,10 +507,11 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 			$(obj)u-boot.ais
 
 # Specify the target for use in elftosb call
+ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
 ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-		elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+		elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
 			-o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -492,19 +530,23 @@ $(obj)u-boot.spr:	$(obj)u-boot.img $(obj)spl/u-boot-spl.bin
 			conv=notrunc 2>/dev/null
 		cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
 
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_OF_SEPARATE),y)
-$(obj)u-boot-dtb-tegra.bin:	$(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@
-		rm $(obj)spl/u-boot-spl-pad.bin
+nodtb=dtb
+dtbfile=$(obj)u-boot.dtb
 else
-$(obj)u-boot-nodtb-tegra.bin:	$(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+nodtb=nodtb
+dtbfile=
+endif
+
+$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
 		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
 		rm $(obj)spl/u-boot-spl-pad.bin
 endif
-endif
+
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+		cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
 
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
@@ -513,9 +555,10 @@ GEN_UBOOT = \
 			$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
 else
 GEN_UBOOT = \
-		UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
-		sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
-		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
+		UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
+		sed  -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
+		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+			$$UNDEF_LST $(__OBJS) \
 			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 			-Map u-boot.map -o u-boot
 endif
@@ -548,8 +591,12 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot
 $(LDSCRIPT):	depend
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
-$(obj)u-boot.lds: $(LDSCRIPT)
-		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates u-boot.lst,
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
+$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 nand_spl:	$(TIMESTAMP_FILE) $(VERSION_FILE) depend
 		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
@@ -610,6 +657,16 @@ checkthumb:
 		echo '*** Your board is configured for THUMB mode.'; \
 		false; \
 	fi
+
+# GCC 3.x is reported to have problems generating the type of relocation
+# that U-Boot wants.
+# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+checkgcc4:
+	@if test $(call cc-version) -lt 0400; then \
+		echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
+		false; \
+	fi
+
 #
 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 #
@@ -695,6 +752,9 @@ easylogo env gdb:
 	$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
 gdbtools: gdb
 
+xmldocs pdfdocs psdocs htmldocs mandocs: tools/kernel-doc/docproc
+	$(MAKE) U_BOOT_VERSION=$(U_BOOT_VERSION) -C doc/DocBook/ $@
+
 tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
 	$(MAKE) -C tools HOST_TOOLS_ALL=y
 
@@ -725,20 +785,6 @@ $(obj).boards.depend:	boards.cfg
 lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
-#========================================================================
-# ARM
-#========================================================================
-
-SX1_stdout_serial_config \
-SX1_config:		unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
-		echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
-	fi;
-	@$(MKCONFIG) -n $@ SX1 arm arm925t sx1
-
 #########################################################################
 ## ARM1176 Systems
 #########################################################################
@@ -779,11 +825,13 @@ clean:
 	       $(obj)tools/mk{env,}image   $(obj)tools/mpc86x_clk	  \
 	       $(obj)tools/mk{smdk5250,}spl				  \
 	       $(obj)tools/mxsboot					  \
-	       $(obj)tools/ncb		   $(obj)tools/ubsha1
+	       $(obj)tools/ncb		   $(obj)tools/ubsha1		  \
+	       $(obj)tools/kernel-doc/docproc
 	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
 	       $(obj)board/matrix_vision/*/bootscript.img		  \
 	       $(obj)board/voiceblue/eeprom 				  \
 	       $(obj)u-boot.lds						  \
+	       $(obj)include/u-boot.lst			  		  \
 	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]	  \
 	       $(obj)arch/blackfin/cpu/init.{lds,elf}
 	@rm -f $(obj)include/bmp_logo.h
@@ -792,9 +840,11 @@ clean:
 	@rm -f $(obj)include/generated/asm-offsets.h
 	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
 	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
+	@$(MAKE) -s -C doc/DocBook/ cleandocs
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
-		-o -name '*.o'	-o -name '*.a' -o -name '*.exe'	\) -print \
+		-o -name '*.o'	-o -name '*.a' -o -name '*.exe' \
+		-o -name '*.cfgtmp' \) -print \
 		| xargs rm -f
 
 # Removes everything not needed for testing u-boot
@@ -816,9 +866,12 @@ clobber:	tidy
 	@rm -f $(obj)u-boot.dtb
 	@rm -f $(obj)u-boot.sb
 	@rm -f $(obj)u-boot.spr
-	@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
-	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
-	@rm -f $(obj)MLO
+	@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
+	@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
+	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
+	@rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
+	@rm -f $(obj)MLO MLO.byteswap
+	@rm -f $(obj)SPL
 	@rm -f $(obj)tools/xway-swap-bytes
 	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
 	@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c