X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=README;h=2352e3862bfa81f4ad2bca262cc26529ac008fd7;hp=8707bf2d7c4510872feaf5e527c230d0919e28bb;hb=a6187dccd813920524987792e49ef2feffb213e6;hpb=a17617d6553369ba72c080128ed8d0b0c33dfc89

diff --git a/README b/README
index 8707bf2d7c..2352e3862b 100644
--- a/README
+++ b/README
@@ -2714,10 +2714,13 @@ FIT uImage format:
 		CONFIG_FB_ADDR
 
 		Define CONFIG_FB_ADDR if you want to use specific
-		address for frame buffer.
-		Then system will reserve the frame buffer address to
-		defined address instead of lcd_setmem (this function
-		grabs the memory for frame buffer by panel's size).
+		address for frame buffer.  This is typically the case
+		when using a graphics controller has separate video
+		memory.  U-Boot will then place the frame buffer at
+		the given address instead of dynamically reserving it
+		in system RAM by calling lcd_setmem(), which grabs
+		the memory for the frame buffer depending on the
+		configured panel size.
 
 		Please see board_init_f function.
 
@@ -2816,6 +2819,12 @@ FIT uImage format:
 		CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
 		Filename to read to load U-Boot when reading from FAT
 
+		CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
+		Set this for NAND SPL on PPC mpc83xx targets, so that
+		start.S waits for the rest of the SPL to load before
+		continuing (the hardware starts execution after just
+		loading the first page rather than the full 4K).
+
 		CONFIG_SPL_NAND_BASE
 		Include nand_base.c in the SPL.  Requires
 		CONFIG_SPL_NAND_DRIVERS.
@@ -2873,6 +2882,10 @@ FIT uImage format:
 		CONFIG_SPL_LIBGENERIC_SUPPORT
 		Support for lib/libgeneric.o in SPL binary
 
+		CONFIG_SPL_PAD_TO
+		Linker address to which the SPL should be padded before
+		appending the SPL payload.
+
 		CONFIG_SPL_TARGET
 		Final target image containing SPL and payload.  Some SPLs
 		use an arch-specific makefile fragment instead, for