X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=arch%2Farm%2Finclude%2Fasm%2Farch-omap4%2Fsys_proto.h;h=039a1f2604f84794c535e767f432e1a65c7de387;hp=c6fab002fb9dde5d1ca37801283d3a6ae5b86ef5;hb=d6639d10dbfa42dc888f8917012550b632a88959;hpb=201532a69cf7e7a84bff354fdab45947425d22b4

diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index c6fab002fb..039a1f2604 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -21,18 +21,94 @@
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
 
-#include <asm/arch/omap4.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/clocks.h>
 #include <asm/io.h>
+#include <asm/omap_common.h>
+#include <asm/arch/mux_omap4.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 struct omap_sysinfo {
 	char *board_string;
 };
+extern const struct omap_sysinfo sysinfo;
 
 void gpmc_init(void);
 void watchdog_init(void);
 u32 get_device_type(void);
-void invalidate_dcache(u32);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs_essential(void);
+void set_muxconf_regs_non_essential(void);
+void sr32(void *, u32, u32, u32);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
+void set_pl310_ctrl_reg(u32 val);
+void setup_clocks_for_console(void);
+void prcm_init(void);
+void bypass_dpll(u32 const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap4_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap_sdram_size(void);
+u32 cortex_rev(void);
+void init_omap_revision(void);
+void do_io_settings(void);
+void omap_vc_init(u16 speed_khz);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
+u32 warm_reset(void);
+void force_emif_self_refresh(void);
+void setup_warmreset_time(void);
 
-extern const struct omap_sysinfo sysinfo;
+static inline u32 running_from_sdram(void)
+{
+	u32 pc;
+	asm volatile ("mov %0, pc" : "=r" (pc));
+	return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
+	    (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+	/*
+	 * u-boot can be running from sdram either because of configuration
+	 * Header or by SPL. If because of CH, then the romcode sets the
+	 * CHSETTINGS executed bit to true in the boot parameter structure that
+	 * it passes to the bootloader.This parameter is stored in the ch_flags
+	 * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
+	 * mandatory section if CH is present.
+	 */
+	if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+		return 0;
+	else
+		return running_from_sdram();
+}
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ *  1. SPL running from SRAM
+ *  2. U-Boot running from FLASH
+ *  3. Non-XIP U-Boot loaded to SDRAM by SPL
+ *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ *     Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap_hw_init_context(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	return OMAP_INIT_CONTEXT_SPL;
+#else
+	if (uboot_loaded_by_spl())
+		return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
+	else if (running_from_sdram())
+		return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
+	else
+		return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
+#endif
+}
 
 #endif