X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=board%2Fatmel%2Fat91sam9m10g45ek%2Fat91sam9m10g45ek.c;h=b807ef9a42533f21df782a208e6941473033c69d;hp=d02312cd57468288f764b2fff86609caabd7bd29;hb=304f936aeaab0c3cc9d5af438fd3498ac7682991;hpb=5fb29f3c48d26981b117b08286bc16ec99d4ca0b

diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index d02312cd57..b807ef9a42 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -3,23 +3,7 @@
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -28,11 +12,11 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
+#include <atmel_mci.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
@@ -104,8 +88,6 @@ static void at91sam9m10g45ek_macb_hw_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
-	unsigned long erstl;
 
 	/* Enable clock */
 	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
@@ -123,21 +105,7 @@ static void at91sam9m10g45ek_macb_hw_init(void)
 	       pin_to_mask(AT91_PIN_PA13),
 	       &pioa->pudr);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
-		AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
-		&rstc->mr);
+	at91_phy_reset();
 
 	/* Re-enable pull-up */
 	writel(pin_to_mask(AT91_PIN_PA15) |
@@ -153,20 +121,20 @@ static void at91sam9m10g45ek_macb_hw_init(void)
 #ifdef CONFIG_LCD
 
 vidinfo_t panel_info = {
-	vl_col:		480,
-	vl_row:		272,
-	vl_clk:		9000000,
-	vl_sync:	ATMEL_LCDC_INVLINE_NORMAL |
-			ATMEL_LCDC_INVFRAME_NORMAL,
-	vl_bpix:	3,
-	vl_tft:		1,
-	vl_hsync_len:	45,
-	vl_left_margin:	1,
-	vl_right_margin:1,
-	vl_vsync_len:	1,
-	vl_upper_margin:40,
-	vl_lower_margin:1,
-	mmio :		 ATMEL_BASE_LCDC,
+	.vl_col =		480,
+	.vl_row =		272,
+	.vl_clk =		9000000,
+	.vl_sync =		ATMEL_LCDC_INVLINE_NORMAL |
+				ATMEL_LCDC_INVFRAME_NORMAL,
+	.vl_bpix =		3,
+	.vl_tft =		1,
+	.vl_hsync_len =		45,
+	.vl_left_margin =	1,
+	.vl_right_margin =	1,
+	.vl_vsync_len =		1,
+	.vl_upper_margin =	40,
+	.vl_lower_margin =	1,
+	.mmio =			ATMEL_BASE_LCDC,
 };
 
 
@@ -250,6 +218,15 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD_INFO */
 #endif
 
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bis)
+{
+	at91_mci_hw_init();
+
+	return atmel_mci_init((void *)ATMEL_BASE_MCI0);
+}
+#endif
+
 int board_early_init_f(void)
 {
 	at91_seriald_hw_init();