X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2FPATI.h;h=5d0e42204128a5b20dcc323020cb28bbdb8c91ba;hp=b07cac11f4249ae717a374f686a92a3b4362145a;hb=2d30ac33d3215c10495d75fe3b094a8a0997ed6a;hpb=d98b0523cfaaedeecb263b15c121c0727b0d80b9

diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index b07cac11f4..5d0e422041 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -2,22 +2,7 @@
  * (C) Copyright 2003
  * Denis Peter d.peter@mpl.ch
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -36,6 +21,8 @@
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFF00000
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Serial Console Configuration */
 #define	CONFIG_5xx_CONS_SCI1
 #undef	CONFIG_5xx_CONS_SCI2
@@ -55,21 +42,11 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_LOADB
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_RUN
 #define CONFIG_CMD_BSP
-#define CONFIG_CMD_IMI
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MISC
 
 
 #if 0
@@ -94,7 +71,6 @@
 #define CONFIG_PREBOOT
 
 #define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"pati=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
 #define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
@@ -109,10 +85,9 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
 
-#define	CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
 
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /***********************************************************************
  * Last Stage Init
@@ -132,9 +107,8 @@
  * Definitions for initial stack pointer and data area
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_IMMR + 0x003f9800)	/* Physical start adress of internal MPC555 writable RAM */
-#define	CONFIG_SYS_INIT_RAM_END	(CONFIG_SYS_IMMR + 0x003fffff)	/* Physical end adress of internal MPC555 used RAM area	*/
-#define	CONFIG_SYS_GBL_DATA_SIZE	128			/* Size in bytes reserved for initial global data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define	CONFIG_SYS_INIT_RAM_SIZE	(CONFIG_SYS_IMMR + 0x003fffff)	/* Physical end adress of internal MPC555 used RAM area	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - GENERATED_GBL_DATA_SIZE) /* Offset from the beginning of ram */
 #define	CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_IMMR + 0x03fa000)	/* Physical start adress of inital stack */
 /*
  * Start addresses for the final memory configuration
@@ -169,11 +143,16 @@
  *
  */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS		1		/* Max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT		128		/* Max number of sectors on one chip	*/
-#define CONFIG_SYS_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+
+#define CONFIG_FLASH_SHOW_PROGRESS	45
 
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	128
 
 #define	CONFIG_ENV_IS_IN_EEPROM
 #ifdef	CONFIG_ENV_IS_IN_EEPROM