X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Faria.h;h=b8d955abd0b278d1d3bc208adbc9f6b5bc74066a;hp=0619cf780d262defccf179d57e439069042ac41e;hb=4641c211f6e37454c30770521c4de79c725036b0;hpb=31a4f1e5b6ee9b6335f0313dce7637cef887f84f diff --git a/include/configs/aria.h b/include/configs/aria.h index 0619cf780d..b8d955abd0 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -2,23 +2,7 @@ * (C) Copyright 2009 Wolfgang Denk * (C) Copyright 2009, DAVE Srl * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -64,7 +48,6 @@ #define CONFIG_SYS_MPC512X_CLKIN 33000000 /* in Hz */ -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R #define CONFIG_SYS_IMMR 0x80000000 @@ -247,13 +230,9 @@ */ #define CONFIG_CMD_NAND /* enable NAND support */ #define CONFIG_JFFS2_NAND /* with JFFS2 on it */ - - #define CONFIG_NAND_MPC5121_NFC #define CONFIG_SYS_NAND_BASE 0x40000000 - #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE /* * Configuration parameters for MPC5121 NAND driver @@ -270,11 +249,16 @@ #define CONFIG_SYS_ARIA_SRAM_BASE (CONFIG_SYS_SRAM_BASE + \ CONFIG_SYS_SRAM_SIZE) #define CONFIG_SYS_ARIA_SRAM_SIZE 0x00100000 /* reserve 1MB-window */ +#define CONFIG_SYS_CS6_START CONFIG_SYS_ARIA_SRAM_BASE +#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_ARIA_SRAM_SIZE #define CONFIG_SYS_ARIA_FPGA_BASE (CONFIG_SYS_ARIA_SRAM_BASE + \ CONFIG_SYS_ARIA_SRAM_SIZE) #define CONFIG_SYS_ARIA_FPGA_SIZE 0x20000 /* 128 KB */ +#define CONFIG_SYS_CS2_START CONFIG_SYS_ARIA_FPGA_BASE +#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_ARIA_FPGA_SIZE + #define CONFIG_SYS_CS0_CFG 0x05059150 #define CONFIG_SYS_CS2_CFG ( (5 << 24) | \ (5 << 16) | \ @@ -326,6 +310,7 @@ * Serial console configuration */ #define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */ +#define CONFIG_SYS_PSC3 #if CONFIG_PSC_CONSOLE != 3 #error CONFIG_PSC_CONSOLE must be 3 #endif @@ -343,13 +328,13 @@ /* Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER #ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif /* * PCI */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE @@ -370,7 +355,6 @@ /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ #define CONFIG_I2C_MULTI_BUS /* I2C speed and slave address */ @@ -383,7 +367,7 @@ /* * IIM - IC Identification Module */ -#undef CONFIG_IIM +#undef CONFIG_FSL_IIM /* * EEPROM configuration for Atmel AT24C32A-10TQ-2.7: @@ -485,7 +469,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -501,8 +484,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is @@ -526,7 +507,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* @@ -536,8 +516,8 @@ #define CONFIG_TIMESTAMP #define CONFIG_HOSTNAME aria -#define CONFIG_BOOTFILE aria/uImage -#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx +#define CONFIG_BOOTFILE "aria/uImage" +#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx" #define CONFIG_LOADADDR 400000 /* default load addr */ @@ -647,4 +627,21 @@ #define FSL_ATA_CTRL_DMA_WRITE 0x02000000 #define FSL_ATA_CTRL_IORDY_EN 0x01000000 +/* Clocks in use */ +#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ + CLOCK_SCCR1_DDR_EN | \ + CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_NFC_EN | \ + CLOCK_SCCR1_PATA_EN | \ + CLOCK_SCCR1_PCI_EN | \ + CLOCK_SCCR1_TPR_EN) + +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN | \ + CLOCK_SCCR2_DIU_EN | \ + CLOCK_SCCR2_I2C_EN) + #endif /* __CONFIG_H */