X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fatngw100.h;h=56bd7f87d1536a1eb37dbc6aeec68f65c85cc6e1;hp=83056b6fd0cc5c2b626ee0cb18cfc04e8f4a615e;hb=1cd10e66f70f767ac7699d414287bf1c9996fc3d;hpb=8fea51a4acb0c7da6fb375c9a708c50c0a1b66ad diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 83056b6fd0..56bd7f87d1 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -3,43 +3,28 @@ * * Configuration settings for the AVR32 Network Gateway * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -#include +#include -#define CONFIG_AVR32 1 -#define CONFIG_AT32AP 1 -#define CONFIG_AT32AP7000 1 -#define CONFIG_ATNGW100 1 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_ATNGW100 -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency * and the PBA bus to run at 1/4 the PLL frequency. */ -#define CONFIG_PLL 1 -#define CONFIG_SYS_POWER_MANAGER 1 +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER #define CONFIG_SYS_OSC0_HZ 20000000 #define CONFIG_SYS_PLL0_DIV 1 #define CONFIG_SYS_PLL0_MUL 7 @@ -61,14 +46,14 @@ */ #define CONFIG_SYS_PLL0_OPT 0x04 -#define CONFIG_USART1 1 - +#define CONFIG_USART_BASE ATMEL_BASE_USART1 +#define CONFIG_USART_ID 1 /* User serviceable stuff */ -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_DOS_PARTITION -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_STACKSIZE (2048) @@ -78,25 +63,14 @@ #define CONFIG_BOOTCOMMAND \ "fsload; bootm" -/* - * Only interrupt autoboot if is pressed. Otherwise, garbage - * data on the serial line may interrupt the boot sequence. - */ #define CONFIG_BOOTDELAY 1 -#define CONFIG_AUTOBOOT 1 -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " /* * After booting the board for the first time, new ethernet addresses * should be generated and assigned to the environment variables * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_OVERWRITE_ETHADDR_ONCE /* * BOOTP/DHCP options @@ -104,8 +78,6 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY -#define CONFIG_DOS_PARTITION 1 - /* * Command line configuration. */ @@ -125,25 +97,26 @@ #undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG -#define CONFIG_ATMEL_USART 1 -#define CONFIG_MACB 1 -#define CONFIG_PORTMUX_PIO 1 +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO #define CONFIG_SYS_NR_PIOS 5 -#define CONFIG_SYS_HSDRAMC 1 -#define CONFIG_MMC 1 -#define CONFIG_ATMEL_MCI 1 -#define CONFIG_ATMEL_SPI 1 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_GENERIC_MMC +#define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH 1 -#define CONFIG_SPI_FLASH_ATMEL 1 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_BASE 0x00000000 #define CONFIG_SYS_FLASH_SIZE 0x800000 @@ -151,19 +124,19 @@ #define CONFIG_SYS_MAX_FLASH_SECT 135 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE #define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE #define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SIZE 65536 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) @@ -174,7 +147,7 @@ #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)