X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fomap5912osk.h;h=376dfdb14cdec7994d9b3bd935d47e60778861a7;hp=63cd9c6b76378282df409004d2750408bd004cb2;hb=9a6a109f0775be316810a3c449c47c0e27d7e477;hpb=156feb90d200f186cdfd856d7f6f1878bb1bec1e

diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 63cd9c6b76..376dfdb14c 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -4,23 +4,7 @@
  * Kshitij Gupta <kshitij@ti.com>
  * Configuation settings for the TI OMAP Innovator board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -42,10 +26,6 @@
 /* the OMAP5912 OSK has 12MHz input clock */
 #define CONFIG_SYS_CLK_FREQ	12000000
 
-#undef CONFIG_USE_IRQ	/* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG      1       /* Required for ramdisk support */
@@ -54,14 +34,13 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
 /*
 */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04800300
 #define CONFIG_LAN91C96_EXT_PHY
 
@@ -84,8 +63,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE	115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 
 /*
  * Command line configuration.
@@ -117,7 +94,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
 #endif
 
 /*
@@ -134,27 +110,13 @@
 #define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END	0x12000000	/* 32 MB in DRAM    */
 
-#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR	0x10000000	/* default load address */
 
 /* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
  * DPLL1. This time is further subdivided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
-#define CONFIG_SYS_PVT	7	/* 2^(pvt+1), divide by 256 */
-#define CONFIG_SYS_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
+#define CONFIG_SYS_PTV		7	/* 2^(PTV+1), divide by 256 */
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -170,6 +132,8 @@
 
 #define CONFIG_SYS_MONITOR_BASE       CONFIG_SYS_FLASH_BASE  /* Monitor at beginning of flash */
 
+#define PHYS_SRAM		0x20000000
+
 /*-----------------------------------------------------------------------
  * FLASH driver setup
  */
@@ -196,9 +160,15 @@
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
 /* addr of environment */
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+
+#define CONFIG_ENV_SIZE		0x20000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET	0x40000	/* environment starts here  */
 
-#define CONFIG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET	0x20000	/* environment starts here  */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR        PHYS_SRAM
+#define CONFIG_SYS_INIT_RAM_SIZE        (250 * 1024)
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE)
 
 #endif							/* __CONFIG_H */