X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fns16550.h;h=5784cfd97b859407c9b32fc3c4246e0674c742fd;hp=87624bf4220f90d6f5c35f681f7ac8dded7db8bb;hb=12e431b2777ce3b6940d7b7f1e32e28f58277560;hpb=3405f38a15eec5092ac47efe0829f10a24491c6e

diff --git a/include/ns16550.h b/include/ns16550.h
index 87624bf422..5784cfd97b 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -1,6 +1,6 @@
 /*
  * NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
  *
  * Cleanup and unification
  * (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH
@@ -16,113 +16,94 @@
  * by Richard Danter (richard.danter@windriver.com), (C) 2005 Wind River Systems
  */
 
-#if (CONFIG_SYS_NS16550_REG_SIZE == 1)
-struct NS16550 {
-	unsigned char rbr;		/* 0 */
-	unsigned char ier;		/* 1 */
-	unsigned char fcr;		/* 2 */
-	unsigned char lcr;		/* 3 */
-	unsigned char mcr;		/* 4 */
-	unsigned char lsr;		/* 5 */
-	unsigned char msr;		/* 6 */
-	unsigned char scr;		/* 7 */
-#if defined(CONFIG_OMAP730)
-	unsigned char mdr1;		/* 8 */
-	unsigned char reg9;		/* 9 */
-	unsigned char regA;		/* A */
-	unsigned char regB;		/* B */
-	unsigned char regC;		/* C */
-	unsigned char regD;		/* D */
-	unsigned char regE;		/* E */
-	unsigned char regF;		/* F */
-	unsigned char reg10;		/* 10 */
-	unsigned char ssr;		/* 11*/
-#endif
-} __attribute__ ((packed));
-#elif (CONFIG_SYS_NS16550_REG_SIZE == 2)
-struct NS16550 {
-	unsigned short rbr;		/* 0 */
-	unsigned short ier;		/* 1 */
-	unsigned short fcr;		/* 2 */
-	unsigned short lcr;		/* 3 */
-	unsigned short mcr;		/* 4 */
-	unsigned short lsr;		/* 5 */
-	unsigned short msr;		/* 6 */
-	unsigned short scr;		/* 7 */
-} __attribute__ ((packed));
-#elif (CONFIG_SYS_NS16550_REG_SIZE == 4)
-struct NS16550 {
-	unsigned long rbr;		/* 0 r  */
-	unsigned long ier;		/* 1 rw */
-	unsigned long fcr;		/* 2 w  */
-	unsigned long lcr;		/* 3 rw */
-	unsigned long mcr;		/* 4 rw */
-	unsigned long lsr;		/* 5 r  */
-	unsigned long msr;		/* 6 r  */
-	unsigned long scr;		/* 7 rw */
-}; /* No need to pack an already aligned struct */
-#elif (CONFIG_SYS_NS16550_REG_SIZE == -4)
-struct NS16550 {
-	unsigned char rbr;		/* 0 */
-	int pad1:24;
-	unsigned char ier;		/* 1 */
-	int pad2:24;
-	unsigned char fcr;		/* 2 */
-	int pad3:24;
-	unsigned char lcr;		/* 3 */
-	int pad4:24;
-	unsigned char mcr;		/* 4 */
-	int pad5:24;
-	unsigned char lsr;		/* 5 */
-	int pad6:24;
-	unsigned char msr;		/* 6 */
-	int pad7:24;
-	unsigned char scr;		/* 7 */
-	int pad8:24;
-#if defined(CONFIG_OMAP)
-	unsigned char mdr1;		/* mode select reset TL16C750*/
+/*
+ * Note that the following macro magic uses the fact that the compiler
+ * will not allocate storage for arrays of size 0
+ */
+
+#include <linux/types.h>
+
+#ifdef CONFIG_DM_SERIAL
+/*
+ * For driver model we always use one byte per register, and sort out the
+ * differences in the driver
+ */
+#define CONFIG_SYS_NS16550_REG_SIZE (-1)
 #endif
-#ifdef CONFIG_OMAP1510
-	int pad9:24;
-	unsigned long pad[10];
-	unsigned char osc_12m_sel;
-	int pad10:24;
+
+#if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0)
+#error "Please define NS16550 registers size."
+#elif defined(CONFIG_SYS_NS16550_MEM32)
+#define UART_REG(x) u32 x
+#elif (CONFIG_SYS_NS16550_REG_SIZE > 0)
+#define UART_REG(x)						   \
+	unsigned char prepad_##x[CONFIG_SYS_NS16550_REG_SIZE - 1]; \
+	unsigned char x;
+#elif (CONFIG_SYS_NS16550_REG_SIZE < 0)
+#define UART_REG(x)							\
+	unsigned char x;						\
+	unsigned char postpad_##x[-CONFIG_SYS_NS16550_REG_SIZE - 1];
 #endif
-} __attribute__ ((packed));
-#elif (CONFIG_SYS_NS16550_REG_SIZE == -8)
+
+/**
+ * struct ns16550_platdata - information about a NS16550 port
+ *
+ * @base:		Base register address
+ * @reg_shift:		Shift size of registers (0=byte, 1=16bit, 2=32bit...)
+ * @clock:		UART base clock speed in Hz
+ */
+struct ns16550_platdata {
+	unsigned char *base;
+	int reg_shift;
+	int clock;
+};
+
+struct udevice;
+
 struct NS16550 {
-	unsigned char rbr;		/* 0 */
-	unsigned char pad0[7];
-	unsigned char ier;		/* 1 */
-	unsigned char pad1[7];
-	unsigned char fcr;		/* 2 */
-	unsigned char pad2[7];
-	unsigned char lcr;		/* 3 */
-	unsigned char pad3[7];
-	unsigned char mcr;		/* 4 */
-	unsigned char pad4[7];
-	unsigned char lsr;		/* 5 */
-	unsigned char pad5[7];
-	unsigned char msr;		/* 6 */
-	unsigned char pad6[7];
-	unsigned char scr;		/* 7 */
-	unsigned char pad7[7];
-} __attribute__ ((packed));
+	UART_REG(rbr);		/* 0 */
+	UART_REG(ier);		/* 1 */
+	UART_REG(fcr);		/* 2 */
+	UART_REG(lcr);		/* 3 */
+	UART_REG(mcr);		/* 4 */
+	UART_REG(lsr);		/* 5 */
+	UART_REG(msr);		/* 6 */
+	UART_REG(spr);		/* 7 */
+#ifdef CONFIG_SOC_DA8XX
+	UART_REG(reg8);		/* 8 */
+	UART_REG(reg9);		/* 9 */
+	UART_REG(revid1);	/* A */
+	UART_REG(revid2);	/* B */
+	UART_REG(pwr_mgmt);	/* C */
+	UART_REG(mdr1);		/* D */
 #else
-#error "Please define NS16550 registers size."
+	UART_REG(mdr1);		/* 8 */
+	UART_REG(reg9);		/* 9 */
+	UART_REG(regA);		/* A */
+	UART_REG(regB);		/* B */
+	UART_REG(regC);		/* C */
+	UART_REG(regD);		/* D */
+	UART_REG(regE);		/* E */
+	UART_REG(uasr);		/* F */
+	UART_REG(scr);		/* 10*/
+	UART_REG(ssr);		/* 11*/
 #endif
+#ifdef CONFIG_DM_SERIAL
+	struct ns16550_platdata *plat;
+#endif
+};
 
 #define thr rbr
 #define iir fcr
 #define dll rbr
 #define dlm ier
 
-typedef volatile struct NS16550 *NS16550_t;
+typedef struct NS16550 *NS16550_t;
 
 /*
  * These are the definitions for the FIFO Control Register
  */
-#define UART_FCR_FIFO_EN 	0x01 /* Fifo enable */
+#define UART_FCR_FIFO_EN	0x01 /* Fifo enable */
 #define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
 #define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
 #define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
@@ -143,6 +124,7 @@ typedef volatile struct NS16550 *NS16550_t;
 #define UART_MCR_OUT1	0x04		/* Out 1 */
 #define UART_MCR_OUT2	0x08		/* Out 2 */
 #define UART_MCR_LOOP	0x10		/* Enable loopback test mode */
+#define UART_MCR_AFE	0x20		/* Enable auto-RTS/CTS */
 
 #define UART_MCR_DMA_EN	0x04
 #define UART_MCR_TX_DFR	0x08
@@ -158,7 +140,7 @@ typedef volatile struct NS16550 *NS16550_t;
 #define UART_LCR_WLS_6	0x01		/* 6 bit character length */
 #define UART_LCR_WLS_7	0x02		/* 7 bit character length */
 #define UART_LCR_WLS_8	0x03		/* 8 bit character length */
-#define UART_LCR_STB	0x04		/* Number of stop Bits, off = 1, on = 1.5 or 2) */
+#define UART_LCR_STB	0x04		/* # stop Bits, off=1, on=1.5 or 2) */
 #define UART_LCR_PEN	0x08		/* Parity eneble */
 #define UART_LCR_EPS	0x10		/* Even Parity Select */
 #define UART_LCR_STKP	0x20		/* Stick Parity */
@@ -206,16 +188,51 @@ typedef volatile struct NS16550 *NS16550_t;
 #define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
 #define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
 
-
-#ifdef CONFIG_OMAP1510
-#define OSC_12M_SEL	0x01	/* selects 6.5 * current clk div */
-#endif
-
 /* useful defaults for LCR */
 #define UART_LCR_8N1	0x03
 
-void	NS16550_init   (NS16550_t com_port, int baud_divisor);
-void	NS16550_putc   (NS16550_t com_port, char c);
-char	NS16550_getc   (NS16550_t com_port);
-int	NS16550_tstc   (NS16550_t com_port);
-void	NS16550_reinit (NS16550_t com_port, int baud_divisor);
+void NS16550_init(NS16550_t com_port, int baud_divisor);
+void NS16550_putc(NS16550_t com_port, char c);
+char NS16550_getc(NS16550_t com_port);
+int NS16550_tstc(NS16550_t com_port);
+void NS16550_reinit(NS16550_t com_port, int baud_divisor);
+
+/**
+ * ns16550_calc_divisor() - calculate the divisor given clock and baud rate
+ *
+ * Given the UART input clock and required baudrate, calculate the divisor
+ * that should be used.
+ *
+ * @port:	UART port
+ * @clock:	UART input clock speed in Hz
+ * @baudrate:	Required baud rate
+ * @return baud rate divisor that should be used
+ */
+int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate);
+
+/**
+ * ns16550_serial_ofdata_to_platdata() - convert DT to platform data
+ *
+ * Decode a device tree node for an ns16550 device. This includes the
+ * register base address and register shift properties. The caller must set
+ * up the clock frequency.
+ *
+ * @dev:	dev to decode platform data for
+ * @return:	0 if OK, -EINVAL on error
+ */
+int ns16550_serial_ofdata_to_platdata(struct udevice *dev);
+
+/**
+ * ns16550_serial_probe() - probe a serial port
+ *
+ * This sets up the serial port ready for use, except for the baud rate
+ * @return 0, or -ve on error
+ */
+int ns16550_serial_probe(struct udevice *dev);
+
+/**
+ * struct ns16550_serial_ops - ns16550 serial operations
+ *
+ * These should be used by the client driver for the driver's 'ops' member
+ */
+extern const struct dm_serial_ops ns16550_serial_ops;