X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fstatus_led.h;h=a5e35df80ac1b13db6d82137a34c71f8ca63c9d5;hp=b8aaaf78fce0f7ac0dba14aa8cb95a453e7405d5;hb=c0f1d684dc6851e3b647637a1fe39c8c4d4f379f;hpb=740f41d3cbefe2068247852220226c2c3b287249 diff --git a/include/status_led.h b/include/status_led.h index b8aaaf78fc..a5e35df80a 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -56,107 +56,6 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -/***** GEN860T *********************************************************/ -#elif defined(CONFIG_GEN860T) - -# define STATUS_LED_PAR im_ioport.iop_papar -# define STATUS_LED_DIR im_ioport.iop_padir -# define STATUS_LED_ODR im_ioport.iop_paodr -# define STATUS_LED_DAT im_ioport.iop_padat - -# define STATUS_LED_BIT 0x0800 /* Red LED 0 is on PA.4 */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) -# define STATUS_LED_STATE STATUS_LED_OFF -# define STATUS_LED_BIT1 0x0400 /* Grn LED 1 is on PA.5 */ -# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 8) -# define STATUS_LED_STATE1 STATUS_LED_BLINKING -# define STATUS_LED_BIT2 0x0080 /* Red LED 2 is on PA.8 */ -# define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 4) -# define STATUS_LED_STATE2 STATUS_LED_OFF -# define STATUS_LED_BIT3 0x0040 /* Grn LED 3 is on PA.9 */ -# define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 4) -# define STATUS_LED_STATE3 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ -# define STATUS_LED_BOOT 1 /* Boot status on LED 1 */ - -/***** IVMS8 **********************************************************/ -#elif defined(CONFIG_IVMS8) - -# define STATUS_LED_PAR im_cpm.cp_pbpar -# define STATUS_LED_DIR im_cpm.cp_pbdir -# define STATUS_LED_ODR im_cpm.cp_pbodr -# define STATUS_LED_DAT im_cpm.cp_pbdat - -# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */ -# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE STATUS_LED_OFF -# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */ -# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE1 STATUS_LED_OFF -/* IDE LED usable for other purposes, too */ -# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */ -# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE2 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_ILOCK_SWITCH 0x00800000 /* ILOCK switch in IRQ4 */ - -# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */ - -# define STATUS_LED_YELLOW 0 -# define STATUS_LED_GREEN 1 -# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */ - -/***** IVML24 *********************************************************/ -#elif defined(CONFIG_IVML24) - -# define STATUS_LED_PAR im_cpm.cp_pbpar -# define STATUS_LED_DIR im_cpm.cp_pbdir -# define STATUS_LED_ODR im_cpm.cp_pbodr -# define STATUS_LED_DAT im_cpm.cp_pbdat - -# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */ -# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE STATUS_LED_OFF -# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */ -# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE1 STATUS_LED_OFF -/* IDE LED usable for other purposes, too */ -# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */ -# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE2 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_ILOCK_SWITCH 0x00004000 /* ILOCK is on PB.17 */ - -# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */ - -# define STATUS_LED_YELLOW 0 -# define STATUS_LED_GREEN 1 -# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */ - -/***** ICU862 ********************************************************/ -#elif defined(CONFIG_ICU862) - -# define STATUS_LED_PAR im_ioport.iop_papar -# define STATUS_LED_DIR im_ioport.iop_padir -# define STATUS_LED_ODR im_ioport.iop_paodr -# define STATUS_LED_DAT im_ioport.iop_padat - -# define STATUS_LED_BIT 0x4000 /* LED 0 is on PA.1 */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING -# define STATUS_LED_BIT1 0x1000 /* LED 1 is on PA.3 */ -# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ) -# define STATUS_LED_STATE1 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - /***** Someone else defines these *************************************/ #elif defined(STATUS_LED_PAR) @@ -165,29 +64,6 @@ void status_led_set (int led, int state); * filling this file up with lots of custom board stuff. */ -/***** NetVia ********************************************************/ -#elif defined(CONFIG_NETVIA) - -#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 - -#define STATUS_LED_PAR im_ioport.iop_pdpar -#define STATUS_LED_DIR im_ioport.iop_pddir -#undef STATUS_LED_ODR -#define STATUS_LED_DAT im_ioport.iop_pddat - -# define STATUS_LED_BIT 0x0080 /* PD.8 */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_BIT1 0x0040 /* PD.9 */ -# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE1 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#endif - /***** CMI ********************************************************/ #elif defined(CONFIG_CMI) # define STATUS_LED_DIR im_mios.mios_mpiosm32ddr @@ -201,40 +77,6 @@ void status_led_set (int led, int state); # define STATUS_LED_ACTIVE 1 /* LED on for bit == 0 */ # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -/***** KUP4K, KUP4X ****************************************************/ -#elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) - -# define STATUS_LED_PAR im_ioport.iop_papar -# define STATUS_LED_DIR im_ioport.iop_padir -# define STATUS_LED_ODR im_ioport.iop_paodr -# define STATUS_LED_DAT im_ioport.iop_padat - -# define STATUS_LED_BIT 0x00000300 /* green + red PA[8]=yellow, PA[7]=red, PA[6]=green */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#elif defined(CONFIG_SVM_SC8xx) -# define STATUS_LED_PAR im_cpm.cp_pbpar -# define STATUS_LED_DIR im_cpm.cp_pbdir -# define STATUS_LED_ODR im_cpm.cp_pbodr -# define STATUS_LED_DAT im_cpm.cp_pbdat - -# define STATUS_LED_BIT 0x00000001 -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -/***** STx XTc ********************************************************/ -#elif defined(CONFIG_STXXTC) -/* XXX empty just to avoid the error */ -/************************************************************************/ #elif defined(CONFIG_V38B) # define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */ @@ -263,6 +105,7 @@ typedef unsigned long led_id_t; extern void __led_toggle (led_id_t mask); extern void __led_init (led_id_t mask, int state); extern void __led_set (led_id_t mask, int state); +void __led_blink(led_id_t mask, int freq); #else # error Status LED configuration missing #endif