X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fusb_defs.h;h=236a5ecdf6f9fda347aafe2bded83e42fbdab372;hp=8032e5712524ee322842e3eebf16a438eb4d99a7;hb=50827a5991bb345319bd0ce76f5e2402fac0c391;hpb=3e126484df7868e341545cce740b24b62b0cd3b7

diff --git a/include/usb_defs.h b/include/usb_defs.h
index 8032e57125..236a5ecdf6 100644
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -2,26 +2,9 @@
  * (C) Copyright 2001
  * Denis Peter, MPL AG Switzerland
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Note: Part of this code has been derived from linux
- *
  */
 #ifndef _USB_DEFS_H_
 #define _USB_DEFS_H_
@@ -80,11 +63,24 @@
 #define USB_DIR_OUT           0
 #define USB_DIR_IN            0x80
 
-/* USB device speeds */
-#define USB_SPEED_FULL		0x0	/* 12Mbps */
-#define USB_SPEED_LOW		0x1	/* 1.5Mbps */
-#define USB_SPEED_HIGH		0x2	/* 480Mbps */
-#define USB_SPEED_RESERVED	0x3
+/*
+ * bmRequestType: USB Device Requests, table 9.2 USB 2.0 spec.
+ * (shifted) direction/type/recipient.
+ */
+#define DeviceRequest \
+	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
+
+#define DeviceOutRequest \
+	((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
+
+#define InterfaceRequest \
+	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+
+#define EndpointRequest \
+	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+
+#define EndpointOutRequest \
+	((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
 
 /* Descriptor types */
 #define USB_DT_DEVICE        0x01
@@ -156,6 +152,18 @@
 #define USB_REQ_SET_IDLE            0x0A
 #define USB_REQ_SET_PROTOCOL        0x0B
 
+/* Device features */
+#define USB_FEAT_HALT               0x00
+#define USB_FEAT_WAKEUP             0x01
+#define USB_FEAT_TEST               0x02
+
+/* Test modes */
+#define USB_TEST_MODE_J             0x01
+#define USB_TEST_MODE_K             0x02
+#define USB_TEST_MODE_SE0_NAK       0x03
+#define USB_TEST_MODE_PACKET        0x04
+#define USB_TEST_MODE_FORCE_ENABLE  0x05
+
 
 /* "pipe" definitions */
 
@@ -214,6 +222,18 @@
 #define USB_PORT_FEAT_C_SUSPEND      18
 #define USB_PORT_FEAT_C_OVER_CURRENT 19
 #define USB_PORT_FEAT_C_RESET        20
+#define USB_PORT_FEAT_TEST           21
+
+/*
+ * Changes to Port feature numbers for Super speed,
+ * from USB 3.0 spec Table 10-8
+ */
+#define USB_SS_PORT_FEAT_U1_TIMEOUT	23
+#define USB_SS_PORT_FEAT_U2_TIMEOUT	24
+#define USB_SS_PORT_FEAT_C_LINK_STATE	25
+#define USB_SS_PORT_FEAT_C_CONFIG_ERROR	26
+#define USB_SS_PORT_FEAT_BH_RESET	28
+#define USB_SS_PORT_FEAT_C_BH_RESET	29
 
 /* wPortStatus bits */
 #define USB_PORT_STAT_CONNECTION    0x0001
@@ -224,9 +244,19 @@
 #define USB_PORT_STAT_POWER         0x0100
 #define USB_PORT_STAT_LOW_SPEED     0x0200
 #define USB_PORT_STAT_HIGH_SPEED    0x0400	/* support for EHCI */
-#define USB_PORT_STAT_SPEED	\
+#define USB_PORT_STAT_SUPER_SPEED   0x0600	/* faking support to XHCI */
+#define USB_PORT_STAT_SPEED_MASK	\
 	(USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)
 
+/*
+ * Changes to wPortStatus bit field in USB 3.0
+ * See USB 3.0 spec Table 10-11
+ */
+#define USB_SS_PORT_STAT_LINK_STATE	0x01e0
+#define USB_SS_PORT_STAT_POWER		0x0200
+#define USB_SS_PORT_STAT_SPEED		0x1c00
+#define USB_SS_PORT_STAT_SPEED_5GBPS	0x0000
+
 /* wPortChange bits */
 #define USB_PORT_STAT_C_CONNECTION  0x0001
 #define USB_PORT_STAT_C_ENABLE      0x0002
@@ -234,13 +264,21 @@
 #define USB_PORT_STAT_C_OVERCURRENT 0x0008
 #define USB_PORT_STAT_C_RESET       0x0010
 
+/*
+ * Changes to wPortChange bit fields in USB 3.0
+ * See USB 3.0 spec Table 10-12
+ */
+#define USB_SS_PORT_STAT_C_BH_RESET	0x0020
+#define USB_SS_PORT_STAT_C_LINK_STATE	0x0040
+#define USB_SS_PORT_STAT_C_CONFIG_ERROR	0x0080
+
 /* wHubCharacteristics (masks) */
 #define HUB_CHAR_LPSM               0x0003
 #define HUB_CHAR_COMPOUND           0x0004
 #define HUB_CHAR_OCPM               0x0018
 
 /*
- *Hub Status & Hub Change bit masks
+ * Hub Status & Hub Change bit masks
  */
 #define HUB_STATUS_LOCAL_POWER	0x0001
 #define HUB_STATUS_OVERCURRENT	0x0002