-c CPU, --cpu CPU Build all boards with cpu CPU
-v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR
-s SOC, --soc SOC Build all boards with soc SOC
+ -b BOARD, --board BOARD Build all boards with board name BOARD
-l, --list List all targets to be built
-m, --maintainers List all targets and maintainer email
-M, --mails List all targets and all affilated emails
exit ${ret}
}
-SHORT_OPTS="ha:c:v:s:lmMCnr"
-LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors"
+SHORT_OPTS="ha:c:v:s:b:lmMCnr"
+LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
# Option processing based on util-linux-2.13/getopt-parse.bash
fi
SELECTED='y'
shift 2 ;;
+ -b|--board)
+ # echo "Option BOARD: argument \`$2'"
+ if [ "$opt_b" ] ; then
+ opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
+ else
+ # We need to check the 7th field too
+ # for boards whose 6th field is "-"
+ opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
-C|--check)
CHECK='C=1'
shift ;;
[ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
[ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
[ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
+[ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
if [ "$SELECTED" ] ; then
SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
# SPDX-License-Identifier: GPL-2.0+
#
-VERSION = 2013
-PATCHLEVEL = 10
+VERSION = 2014
+PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
# is "yes"), so compile examples after U-Boot is compiled.
SUBDIR_TOOLS = tools
-SUBDIR_EXAMPLES = examples/standalone examples/api
SUBDIRS = $(SUBDIR_TOOLS)
.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)
sinclude $(obj)include/autoconf.mk.dep
sinclude $(obj)include/autoconf.mk
+SUBDIR_EXAMPLES-y := examples/standalone
+SUBDIR_EXAMPLES-$(CONFIG_API) += examples/api
ifndef CONFIG_SANDBOX
-SUBDIRS += $(SUBDIR_EXAMPLES)
+SUBDIRS += $(SUBDIR_EXAMPLES-y)
endif
# load ARCH, BOARD, and CPU configuration
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
LIBS-y += lib/
-LIBS-$(CONFIG_RSA) += lib/rsa/
-LIBS-$(CONFIG_LZMA) += lib/lzma/
-LIBS-$(CONFIG_LZO) += lib/lzo/
-LIBS-$(CONFIG_ZLIB) += lib/zlib/
-LIBS-$(CONFIG_TIZEN) += lib/tizen/
LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
LIBS-y += $(CPUDIR)/
ifdef SOC
LIBS-y += drivers/usb/ulpi/
LIBS-y += common/
LIBS-y += lib/libfdt/
-LIBS-y += api/
+LIBS-$(CONFIG_API) += api/
LIBS-y += post/
LIBS-y += test/
build := -f $(TOPDIR)/scripts/Makefile.build -C
-all: $(ALL-y) $(SUBDIR_EXAMPLES)
+all: $(ALL-y) $(SUBDIR_EXAMPLES-y)
$(obj)u-boot.dtb: checkdtc $(obj)u-boot
$(MAKE) $(build) dts binary
$(SUBDIRS): depend
$(MAKE) -C $@ all
-$(SUBDIR_EXAMPLES): $(obj)u-boot
+$(SUBDIR_EXAMPLES-y): $(obj)u-boot
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
$(obj)tpl/u-boot-tpl.bin: $(SUBDIR_TOOLS) depend
$(MAKE) -C spl all CONFIG_TPL_BUILD=y
-updater:
- $(MAKE) -C tools/updater all
-
# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(filter-out tools,$(SUBDIRS)) \
-updater depend dep tags ctags etags cscope $(obj)System.map:
+depend dep tags ctags etags cscope $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
kernel). Defining CONFIG_STATUS_LED enables this
feature in U-Boot.
+ Additional options:
+
+ CONFIG_GPIO_LED
+ The status LED can be connected to a GPIO pin.
+ In such cases, the gpio_led driver can be used as a
+ status LED backend implementation. Define CONFIG_GPIO_LED
+ to include the gpio_led driver in the U-Boot binary.
+
+ CONFIG_GPIO_LED_INVERTED_TABLE
+ Some GPIO connected LEDs may have inverted polarity in which
+ case the GPIO high value corresponds to LED off state and
+ GPIO low value corresponds to LED on state.
+ In such cases CONFIG_GPIO_LED_INVERTED_TABLE may be defined
+ with a list of GPIO LEDs that have inverted polarity.
+
- CAN Support: CONFIG_CAN_DRIVER
Defining CONFIG_CAN_DRIVER enables CAN driver support
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_API) += api.o api_display.o api_net.o api_storage.o \
- api_platform-$(ARCH).o
+obj-y += api.o api_display.o api_net.o api_storage.o
+obj-$(CONFIG_ARM) += api_platform-arm.o
+obj-$(CONFIG_PPC) += api_platform-powerpc.o
obj-y += emif4.o
obj-y += board.o
obj-y += mux.o
-obj-$(CONFIG_NAND_OMAP_GPMC) += elm.o
struct gpmc *gpmc_cfg;
-#if defined(CONFIG_CMD_NAND)
-static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
- M_NAND_GPMC_CONFIG1,
- M_NAND_GPMC_CONFIG2,
- M_NAND_GPMC_CONFIG3,
- M_NAND_GPMC_CONFIG4,
- M_NAND_GPMC_CONFIG5,
- M_NAND_GPMC_CONFIG6, 0
-};
-#endif
-
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size)
{
/* putting a blanket check on GPMC based on ZeBu for now */
gpmc_cfg = (struct gpmc *)GPMC_BASE;
-
-#ifdef CONFIG_CMD_NAND
- const u32 *gpmc_config = NULL;
- u32 base = 0;
+#if defined(CONFIG_NOR)
+/* configure GPMC for NOR */
+ const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
+ STNOR_GPMC_CONFIG2,
+ STNOR_GPMC_CONFIG3,
+ STNOR_GPMC_CONFIG4,
+ STNOR_GPMC_CONFIG5,
+ STNOR_GPMC_CONFIG6,
+ STNOR_GPMC_CONFIG7
+ };
+ u32 size = GPMC_SIZE_16M;
+ u32 base = CONFIG_SYS_FLASH_BASE;
+#elif defined(CONFIG_NAND)
+/* configure GPMC for NAND */
+ const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1,
+ M_NAND_GPMC_CONFIG2,
+ M_NAND_GPMC_CONFIG3,
+ M_NAND_GPMC_CONFIG4,
+ M_NAND_GPMC_CONFIG5,
+ M_NAND_GPMC_CONFIG6,
+ 0
+ };
+ u32 size = GPMC_SIZE_256M;
+ u32 base = CONFIG_SYS_NAND_BASE;
+#else
+ const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 };
u32 size = 0;
+ u32 base = 0;
#endif
/* global settings */
writel(0x00000008, &gpmc_cfg->sysconfig);
*/
writel(0, &gpmc_cfg->cs[0].config7);
sdelay(1000);
-
-#ifdef CONFIG_CMD_NAND
- gpmc_config = gpmc_m_nand;
-
- base = PISMO1_NAND_BASE;
- size = PISMO1_NAND_SIZE;
- enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
-#endif
+ /* enable chip-select specific configurations */
+ enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
}
#define PISMO2_NAND_CS0 7
#define PISMO2_NAND_CS1 8
-/* make it readable for the gpmc_init */
-#define PISMO1_NOR_BASE FLASH_BASE
-#define PISMO1_NAND_BASE CONFIG_SYS_NAND_BASE
-#define PISMO1_NAND_SIZE GPMC_SIZE_256M
-
#endif /* endif _MEM_H_ */
}
#endif
+enum omap_ecc {
+ /* 1-bit ECC calculation by Software, Error detection by Software */
+ OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */
+ /* 1-bit ECC calculation by GPMC, Error detection by Software */
+ /* ECC layout compatible to legacy ROMCODE. */
+ OMAP_ECC_HAM1_CODE_HW,
+ /* 4-bit ECC calculation by GPMC, Error detection by Software */
+ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
+ /* 4-bit ECC calculation by GPMC, Error detection by ELM */
+ OMAP_ECC_BCH4_CODE_HW,
+ /* 8-bit ECC calculation by GPMC, Error detection by Software */
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
+ /* 8-bit ECC calculation by GPMC, Error detection by ELM */
+ OMAP_ECC_BCH8_CODE_HW,
+};
+
#endif /* __ASM_OMAP_GPMC_H */
#define OS_LOG_MAGIC_ADDR ((unsigned long *)0x4f0)
#define OS_LOG_PTR_ADDR ((char **)0x4f4)
-bool bfin_os_log_check(void)
+int bfin_os_log_check(void)
{
if (*OS_LOG_MAGIC_ADDR != OS_LOG_MAGIC)
- return false;
+ return 0;
*OS_LOG_MAGIC_ADDR = 0;
- return true;
+ return 1;
}
void bfin_os_log_dump(void)
# define bfin_revid() (bfin_read_CHIPID() >> 28)
-extern bool bfin_os_log_check(void);
+extern int bfin_os_log_check(void);
extern void bfin_os_log_dump(void);
extern void blackfin_icache_flush_range(const void *, const void *);
obj-y := cpu.o os.o start.o state.o
# os.c is build in the system environment, so needs standard includes
-$(obj)os.o: ALL_CFLAGS := $(filter-out -nostdinc,$(ALL_CFLAGS))
-$(obj).depend.os: CPPFLAGS := $(filter-out -nostdinc,$(CPPFLAGS))
+$(obj)os.o: ALL_CFLAGS := $(BASE_CPPFLAGS) \
+ $(patsubst %, -idirafter %, $(BASE_INCLUDE_DIRS))
+$(obj).depend.os: CPPFLAGS := $(BASE_CPPFLAGS) \
+ $(patsubst %, -idirafter %, $(BASE_INCLUDE_DIRS))
#include <fcntl.h>
#include <getopt.h>
#include <stdio.h>
+#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <termios.h>
usleep(usec);
}
-u64 __attribute__((no_instrument_function)) os_get_nsec(void)
+uint64_t __attribute__((no_instrument_function)) os_get_nsec(void)
{
#if defined(CLOCK_MONOTONIC) && defined(_POSIX_MONOTONIC_CLOCK)
struct timespec tp;
}
/* Map from a pointer to our RAM buffer */
-phys_addr_t map_to_sysmem(void *ptr);
+phys_addr_t map_to_sysmem(const void *ptr);
#endif
#define BITS_PER_LONG CONFIG_SANDBOX_BITS_PER_LONG
typedef unsigned long dma_addr_t;
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
+typedef u32 phys_addr_t;
+typedef u32 phys_size_t;
#endif /* __KERNEL__ */
-#include <config.h>
-
-TRAP ta 0; nop; nop; nop;
-
-/* Software trap. Treat as BAD_TRAP for the time being... */
-#define SOFT_TRAP TRAP(_hwerr)
-
-#define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */
-#define WIM_INIT 2
-
-/* All traps low-level code here must end with this macro. */
-#define RESTORE_ALL b ret_trap_entry; clr %l6;
-
-#define WRITE_PAUSE nop;nop;nop
-
-WINDOWSIZE = (16 * 4)
-ARGPUSHSIZE = (6 * 4)
-ARGPUSH = (WINDOWSIZE + 4)
-MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
-
-/* Number of register windows */
-#ifndef CONFIG_SYS_SPARC_NWINDOWS
-#error Must define number of SPARC register windows, default is 8
-#endif
-
-#define STACK_ALIGN 8
-#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
+/* This is where the SPARC/LEON3 starts
+ * Copyright (C) 2007,
+ * Daniel Hellstrom, daniel@gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
- .section ".start", "ax"
- .globl _starttate */
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/asmmacro.h>
+#include <asm/winmacro.h>
+#include <asm/psr.h>
+#include <asm/stack.h>
+#include <asm/leon.h>
+#include <version.h>
+
+/* Entry for traps which jump to a programmer-specified trap handler. */
+#define TRAPR(H) \
+ wr %g0, 0xfe0, %psr; \
+ mov %g0, %tbr; \
+ ba (H); \
+ mov %g0, %wim;
+
+#define TRAP(H) \
+ mov %psr, %l0; \
+ ba (H); \
+ nop; nop;
+
+#define TRAPI(ilevel) \
+ mov ilevel, %l7; \
+ mov %psr, %l0; \
+ b _irq_entry; \
+ mov %wim, %l3
+
+/* Unexcpected trap will halt the processor by forcing it to error state */
#undef BAD_TRAP
#define BAD_TRAP ta 0; nop; nop; nop;
void lcd_show_board_info(void)
{
- ulong dram_size, nand_size;
+ ulong dram_size;
+ uint64_t nand_size;
int i;
char temp[32];
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
nand_size += nand_info[i].size;
#endif
- lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
+ lcd_printf("%ld MB SDRAM, %lld MB NAND\n",
dram_size >> 20, nand_size >> 20);
}
#endif /* CONFIG_LCD_INFO */
extra-y := h2200-header.bin
-$(obj)h2200-header.o: h2200-header.S
- $(CC) $(CFLAGS) -c -o $@ $<
-
$(obj)h2200-header.bin: $(obj)h2200-header.o
$(OBJCOPY) -O binary $< $@
*/
int board_init(void)
{
-#ifdef CONFIG_NOR
- const u32 gpmc_nor[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
- STNOR_GPMC_CONFIG2, STNOR_GPMC_CONFIG3, STNOR_GPMC_CONFIG4,
- STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 };
-#endif
-
#if defined(CONFIG_HW_WATCHDOG)
hw_watchdog_init();
#endif
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
+#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
gpmc_init();
-
-#ifdef CONFIG_NOR
- /* Reconfigure CS0 for NOR instead of NAND. */
- enable_gpmc_cs_config(gpmc_nor, &gpmc_cfg->cs[0],
- CONFIG_SYS_FLASH_BASE, GPMC_SIZE_16M);
#endif
-
return 0;
}
#
obj-y := tqm5200.o cmd_stk52xx.o cmd_tb5200.o cam5200_flash.o
-
-$(obj)cam5200_flash.o: cam5200_flash.c
- $(CC) $(CFLAGS) -c -o $@ $<
CPPFLAGS += -I..
-$(obj)env_embedded.o: $(src)env_embedded.c $(obj)../tools/envcrc
+$(obj)env_embedded.o: $(src)env_embedded.c
$(CC) $(AFLAGS) -Wa,--no-warn \
-DENV_CRC=$(shell $(obj)../tools/envcrc) \
-c -o $@ $(src)env_embedded.c
-$(obj)../tools/envcrc:
- $(MAKE) -C ../tools
-
# SEE README.arm-unaligned-accesses
$(obj)hush.o: CFLAGS += $(PLATFORM_NO_UNALIGNED)
$(obj)fdt_support.o: CFLAGS += $(PLATFORM_NO_UNALIGNED)
return 0;
}
-static int mdio_write_ranges(struct mii_dev *bus, int addrlo,
+static int mdio_write_ranges(struct phy_device *phydev, struct mii_dev *bus,
+ int addrlo,
int addrhi, int devadlo, int devadhi,
- int reglo, int reghi, unsigned short data)
+ int reglo, int reghi, unsigned short data,
+ int extended)
{
int addr, devad, reg;
int err = 0;
for (addr = addrlo; addr <= addrhi; addr++) {
for (devad = devadlo; devad <= devadhi; devad++) {
for (reg = reglo; reg <= reghi; reg++) {
- err = bus->write(bus, addr, devad, reg, data);
+ if (!extended)
+ err = bus->write(bus, addr, devad,
+ reg, data);
+ else
+ err = phydev->drv->writeext(phydev,
+ addr, devad, reg, data);
if (err)
goto err_out;
return err;
}
-static int mdio_read_ranges(struct mii_dev *bus, int addrlo,
+static int mdio_read_ranges(struct phy_device *phydev, struct mii_dev *bus,
+ int addrlo,
int addrhi, int devadlo, int devadhi,
- int reglo, int reghi)
+ int reglo, int reghi, int extended)
{
int addr, devad, reg;
for (reg = reglo; reg <= reghi; reg++) {
int val;
- val = bus->read(bus, addr, devad, reg);
+ if (!extended)
+ val = bus->read(bus, addr, devad, reg);
+ else
+ val = phydev->drv->readext(phydev, addr,
+ devad, reg);
+
if (val < 0) {
printf("Error\n");
}
static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
+ struct phy_device **phydev,
int *addrlo, int *addrhi)
{
- struct phy_device *phydev;
+ struct phy_device *dev = *phydev;
if ((argc < 1) || (argc > 2))
return -1;
* device by the given name. If none are found, we call
* extract_range() on the string, and see if it's an address range.
*/
- phydev = mdio_phydev_for_ethname(argv[0]);
+ dev = mdio_phydev_for_ethname(argv[0]);
- if (phydev) {
- *addrlo = *addrhi = phydev->addr;
- *bus = phydev->bus;
+ if (dev) {
+ *addrlo = *addrhi = dev->addr;
+ *bus = dev->bus;
return 0;
}
unsigned short data;
int pos = argc - 1;
struct mii_dev *bus;
+ struct phy_device *phydev = NULL;
+ int extended = 0;
if (argc < 2)
return CMD_RET_USAGE;
if (flag & CMD_FLAG_REPEAT)
op[0] = last_op[0];
+ if (strlen(argv[1]) > 1) {
+ op[1] = argv[1][1];
+ if (op[1] == 'x') {
+ phydev = mdio_phydev_for_ethname(argv[2]);
+
+ if (phydev) {
+ addrlo = phydev->addr;
+ addrhi = addrlo;
+ bus = phydev->bus;
+ extended = 1;
+ } else {
+ return -1;
+ }
+
+ if (!phydev->drv ||
+ (!phydev->drv->writeext && (op[0] == 'w')) ||
+ (!phydev->drv->readext && (op[0] == 'r'))) {
+ puts("PHY does not have extended functions\n");
+ return -1;
+ }
+ }
+ }
+
switch (op[0]) {
case 'w':
if (pos > 1)
default:
if (pos > 1)
if (extract_phy_range(&(argv[2]), pos - 1, &bus,
- &addrlo, &addrhi))
+ &phydev, &addrlo, &addrhi))
return -1;
break;
switch (op[0]) {
case 'w':
- mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi,
- reglo, reghi, data);
+ mdio_write_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi,
+ reglo, reghi, data, extended);
break;
case 'r':
- mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi,
- reglo, reghi);
+ mdio_read_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi,
+ reglo, reghi, extended);
break;
}
"read PHY's register at <devad>.<reg>\n"
"mdio write <phydev> [<devad>.]<reg> <data> - "
"write PHY's register at <devad>.<reg>\n"
+ "mdio rx <phydev> [<devad>.]<reg> - "
+ "read PHY's extended register at <devad>.<reg>\n"
+ "mdio wx <phydev> [<devad>.]<reg> <data> - "
+ "write PHY's extended register at <devad>.<reg>\n"
"<phydev> may be:\n"
" <busname> <addr>\n"
" <addr>\n"
static const MII_field_desc_t reg_4_desc_tbl[] = {
{ 15, 15, 0x01, "next page able" },
- { 14, 14, 0x01, "reserved" },
+ { 14, 14, 0x01, "(reserved)" },
{ 13, 13, 0x01, "remote fault" },
- { 12, 12, 0x01, "reserved" },
+ { 12, 12, 0x01, "(reserved)" },
{ 11, 11, 0x01, "asymmetric pause" },
{ 10, 10, 0x01, "pause enable" },
{ 9, 9, 0x01, "100BASE-T4 able" },
printf("CRC32 for %08lx ... %08lx ==> %08lx\n",
addr, addr + len - 1, crc);
- if (argc > 3) {
- ptr = (ulong *)simple_strtoul(argv[3], NULL, 16);
+ if (argc >= 3) {
+ ptr = (ulong *)simple_strtoul(argv[0], NULL, 16);
*ptr = crc;
}
}
endif
endif
+# Sandbox needs the base flags and includes, so keep them around
+BASE_CPPFLAGS := $(CPPFLAGS)
+
ifneq ($(OBJTREE),$(SRCTREE))
-CPPFLAGS += -I$(OBJTREE)/include
+BASE_INCLUDE_DIRS := $(OBJTREE)/include
endif
-CPPFLAGS += -I$(TOPDIR)/include -I$(SRCTREE)/arch/$(ARCH)/include
+BASE_INCLUDE_DIRS += $(TOPDIR)/include $(SRCTREE)/arch/$(ARCH)/include
+
+CPPFLAGS += $(patsubst %, -I%, $(BASE_INCLUDE_DIRS))
CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \
-isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
CONFIG_SYS_MAX_NAND_DEVICE
The maximum number of NAND devices you want to support.
+ CONFIG_SYS_NAND_MAX_ECCPOS
+ If specified, overrides the maximum number of ECC bytes
+ supported. Useful for reducing image size, especially with SPL.
+ This must be at least 48 if nand_base.c is used.
+
+ CONFIG_SYS_NAND_MAX_OOBFREE
+ If specified, overrides the maximum number of free OOB regions
+ supported. Useful for reducing image size, especially with SPL.
+ This must be at least 2 if nand_base.c is used.
+
CONFIG_SYS_NAND_MAX_CHIPS
The maximum number of NAND chips per device to be supported.
Please convert your driver even if you don't need the extra
flexibility, so that one day we can eliminate the old mechanism.
+
+ CONFIG_SYS_NAND_ONFI_DETECTION
+ Enables detection of ONFI compliant devices during probe.
+ And fetching device parameters flashed on device, by parsing
+ ONFI parameter page.
+
+ CONFIG_BCH
+ Enables software based BCH ECC algorithm present in lib/bch.c
+ This is used by SoC platforms which do not have built-in ELM
+ hardware engine required for BCH ECC correction.
+
+
+Platform specific options
+=========================
+ CONFIG_NAND_OMAP_GPMC
+ Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
+ GPMC controller is used for parallel NAND flash devices, and can
+ do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8
+ and BCH16 ECC algorithms.
+
+ CONFIG_NAND_OMAP_ELM
+ Enables omap_elm.c driver for OMAPx and AMxxxx platforms.
+ ELM controller is used for ECC error detection (not ECC calculation)
+ of BCH4, BCH8 and BCH16 ECC algorithms.
+ Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
+ thus such SoC platforms need to depend on software library for ECC error
+ detection. However ECC calculation on such plaforms would still be
+ done by GPMC controller.
+
+ CONFIG_NAND_OMAP_ECCSCHEME
+ On OMAP platforms, this CONFIG specifies NAND ECC scheme.
+ It can take following values:
+ OMAP_ECC_HAM1_CODE_SW
+ 1-bit Hamming code using software lib.
+ (for legacy devices only)
+ OMAP_ECC_HAM1_CODE_HW
+ 1-bit Hamming code using GPMC hardware.
+ (for legacy devices only)
+ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
+ 4-bit BCH code (unsupported)
+ OMAP_ECC_BCH4_CODE_HW
+ 4-bit BCH code (unsupported)
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+ 8-bit BCH code with
+ - ecc calculation using GPMC hardware engine,
+ - error detection using software library.
+ - requires CONFIG_BCH to enable software BCH library
+ (For legacy device which do not have ELM h/w engine)
+ OMAP_ECC_BCH8_CODE_HW
+ 8-bit BCH code with
+ - ecc calculation using GPMC hardware engine,
+ - error detection using ELM hardware engine.
+
NOTE:
=====
To enable hardware assisted BCH8 (8-bit BCH [Bose, Chaudhuri, Hocquenghem]) on
OMAP3 devices we can use the BCH library in lib/bch.c. To do so add CONFIG_BCH
-to enable the library and CONFIG_NAND_OMAP_BCH8 to to enable hardware assisted
-syndrom generation to your board config.
+and set CONFIG_NAND_OMAP_ECCSCHEME=5 (refer README.nand) for selecting BCH8_SW.
The NAND OOB layout is the same as in linux kernel, if the linux kernel BCH8
implementation for OMAP3 works for you so the u-boot version should also.
When you require the SPL to read with BCH8 there are two more configs to
$(X86DIR)/sys.o \
$(X86DIR)/debug.o
-EXTRA_CFLAGS += -I. -I./include -I$(TOPDIR)/include \
+EXTRA_CFLAGS += -I. -I./include \
-D__PPC__ -D__BIG_ENDIAN__
CFLAGS += $(EXTRA_CFLAGS)
-HOSTCFLAGS += $(EXTRA_CFLAGS)
CPPFLAGS += $(EXTRA_CFLAGS)
#ifndef CONFIG_A003399_NOR_WORKAROUND
#ifdef CONFIG_SYS_CSPR0_EXT
set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR0_EXT
+ set_ifc_csor_ext(IFC_CS0, CONFIG_SYS_CSOR0_EXT);
#endif
set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
#ifdef CONFIG_SYS_CSPR1_EXT
set_ifc_cspr_ext(IFC_CS1, CONFIG_SYS_CSPR1_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR1_EXT
+ set_ifc_csor_ext(IFC_CS1, CONFIG_SYS_CSOR1_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1)
set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0);
set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1);
#ifdef CONFIG_SYS_CSPR2_EXT
set_ifc_cspr_ext(IFC_CS2, CONFIG_SYS_CSPR2_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR2_EXT
+ set_ifc_csor_ext(IFC_CS2, CONFIG_SYS_CSOR2_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2)
set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0);
set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1);
#ifdef CONFIG_SYS_CSPR3_EXT
set_ifc_cspr_ext(IFC_CS3, CONFIG_SYS_CSPR3_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR3_EXT
+ set_ifc_csor_ext(IFC_CS3, CONFIG_SYS_CSOR3_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3)
set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0);
set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1);
#ifdef CONFIG_SYS_CSPR4_EXT
set_ifc_cspr_ext(IFC_CS4, CONFIG_SYS_CSPR4_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR4_EXT
+ set_ifc_csor_ext(IFC_CS4, CONFIG_SYS_CSOR4_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR4) && defined(CONFIG_SYS_CSOR4)
set_ifc_ftim(IFC_CS4, IFC_FTIM0, CONFIG_SYS_CS4_FTIM0);
set_ifc_ftim(IFC_CS4, IFC_FTIM1, CONFIG_SYS_CS4_FTIM1);
#ifdef CONFIG_SYS_CSPR5_EXT
set_ifc_cspr_ext(IFC_CS5, CONFIG_SYS_CSPR5_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR5_EXT
+ set_ifc_csor_ext(IFC_CS5, CONFIG_SYS_CSOR5_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR5) && defined(CONFIG_SYS_CSOR5)
set_ifc_ftim(IFC_CS5, IFC_FTIM0, CONFIG_SYS_CS5_FTIM0);
set_ifc_ftim(IFC_CS5, IFC_FTIM1, CONFIG_SYS_CS5_FTIM1);
#ifdef CONFIG_SYS_CSPR6_EXT
set_ifc_cspr_ext(IFC_CS6, CONFIG_SYS_CSPR6_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR6_EXT
+ set_ifc_csor_ext(IFC_CS6, CONFIG_SYS_CSOR6_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR6) && defined(CONFIG_SYS_CSOR6)
set_ifc_ftim(IFC_CS6, IFC_FTIM0, CONFIG_SYS_CS6_FTIM0);
set_ifc_ftim(IFC_CS6, IFC_FTIM1, CONFIG_SYS_CS6_FTIM1);
#ifdef CONFIG_SYS_CSPR7_EXT
set_ifc_cspr_ext(IFC_CS7, CONFIG_SYS_CSPR7_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR7_EXT
+ set_ifc_csor_ext(IFC_CS7, CONFIG_SYS_CSOR7_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR7) && defined(CONFIG_SYS_CSOR7)
set_ifc_ftim(IFC_CS7, IFC_FTIM0, CONFIG_SYS_CS7_FTIM0);
set_ifc_ftim(IFC_CS7, IFC_FTIM1, CONFIG_SYS_CS7_FTIM1);
#include <status_led.h>
#include <asm/gpio.h>
+#ifndef CONFIG_GPIO_LED_INVERTED_TABLE
+#define CONFIG_GPIO_LED_INVERTED_TABLE {}
+#endif
+
+static led_id_t gpio_led_inv[] = CONFIG_GPIO_LED_INVERTED_TABLE;
+
+static int gpio_led_gpio_value(led_id_t mask, int state)
+{
+ int i, gpio_value = (state == STATUS_LED_ON);
+
+ for (i = 0; i < ARRAY_SIZE(gpio_led_inv); i++) {
+ if (gpio_led_inv[i] == mask)
+ gpio_value = !gpio_value;
+ }
+
+ return gpio_value;
+}
+
void __led_init(led_id_t mask, int state)
{
- gpio_request(mask, "gpio_led");
- gpio_direction_output(mask, state == STATUS_LED_ON);
+ int gpio_value;
+
+ if (gpio_request(mask, "gpio_led") != 0) {
+ printf("%s: failed requesting GPIO%lu!\n", __func__, mask);
+ return;
+ }
+
+ gpio_value = gpio_led_gpio_value(mask, state);
+ gpio_direction_output(mask, gpio_value);
}
void __led_set(led_id_t mask, int state)
{
- gpio_set_value(mask, state == STATUS_LED_ON);
+ int gpio_value = gpio_led_gpio_value(mask, state);
+
+ gpio_set_value(mask, gpio_value);
}
void __led_toggle(led_id_t mask)
obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
+obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
obj-$(CONFIG_NAND_PLAT) += nand_plat.o
obj-$(CONFIG_NAND_DOCG4) += docg4.o
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n");
+ dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n");
return -1;
}
*(buf + byte_pos) ^= (1 << bit_pos);
pos = sector_num * host->pmecc_sector_size + byte_pos;
- printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, *(buf + byte_pos));
} else {
/* Bit flip in OOB area */
ecc[tmp] ^= (1 << bit_pos);
pos = tmp + nand_chip->ecc.layout->eccpos[0];
- printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, ecc[tmp]);
}
err_nbr = pmecc_err_location(mtd);
if (err_nbr == -1) {
- printk(KERN_ERR "PMECC: Too many errors\n");
+ dev_err(host->dev, "PMECC: Too many errors\n");
mtd->ecc_stats.failed++;
return -EIO;
} else {
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n");
+ dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n");
return -1;
}
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
+ dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
goto out;
}
switch (mtd->writesize) {
case 2048:
case 4096:
+ case 8192:
host->pmecc_degree = (sector_size == 512) ?
PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
nand->ecc.steps = 1;
nand->ecc.bytes = host->pmecc_bytes_per_sector *
host->pmecc_sector_number;
+
+ if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) {
+ dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n",
+ MTD_MAX_ECCPOS_ENTRIES_LARGE);
+ return -EINVAL;
+ }
+
if (nand->ecc.bytes > mtd->oobsize - 2) {
- printk(KERN_ERR "No room for ECC bytes\n");
+ dev_err(host->dev, "No room for ECC bytes\n");
return -EINVAL;
}
pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
case 512:
case 1024:
/* TODO */
- printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n");
+ dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n");
default:
/* page size not handled by HW ECC */
/* switching back to soft ECC */
/* it doesn't seems to be a freshly
* erased block.
* We can't correct so many errors */
- printk(KERN_WARNING "atmel_nand : multiple errors detected."
+ dev_warn(host->dev, "atmel_nand : multiple errors detected."
" Unable to correct.\n");
return -EIO;
}
/* there's nothing much to do here.
* the bit error is on the ECC itself.
*/
- printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
+ dev_warn(host->dev, "atmel_nand : one bit error on ECC code."
" Nothing to correct\n");
return 0;
}
- printk(KERN_WARNING "atmel_nand : one bit error on data."
+ dev_warn(host->dev, "atmel_nand : one bit error on data."
" (word offset in the page :"
" 0x%x bit offset : 0x%x)\n",
ecc_word, ecc_bit);
/* 8 bits words */
dat[ecc_word] ^= (1 << ecc_bit);
}
- printk(KERN_WARNING "atmel_nand : error corrected\n");
+ dev_warn(host->dev, "atmel_nand : error corrected\n");
return 1;
}
mtd->priv = nand;
nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr;
+#ifdef CONFIG_NAND_ECC_BCH
+ nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
nand->ecc.mode = NAND_ECC_SOFT;
+#endif
#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
#ifdef CONFIG_SYS_NAND_READY_PIN
nand->dev_ready = at91_nand_ready;
#endif
- nand->chip_delay = 20;
+ nand->chip_delay = 75;
ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
if (ret)
int i;
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
if (atmel_nand_chip_init(i, base_addr[i]))
- printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip",
+ dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip",
i);
}
.oobfree = { {2, 6}, {136, 82} },
};
+/* 8192-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_8192_ecc4 = {
+ .eccbytes = 128,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ },
+ .oobfree = { {2, 6}, {136, 208} },
+};
+
+/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_8192_ecc8 = {
+ .eccbytes = 256,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ 136, 137, 138, 139, 140, 141, 142, 143,
+ 144, 145, 146, 147, 148, 149, 150, 151,
+ 152, 153, 154, 155, 156, 157, 158, 159,
+ 160, 161, 162, 163, 164, 165, 166, 167,
+ 168, 169, 170, 171, 172, 173, 174, 175,
+ 176, 177, 178, 179, 180, 181, 182, 183,
+ 184, 185, 186, 187, 188, 189, 190, 191,
+ 192, 193, 194, 195, 196, 197, 198, 199,
+ 200, 201, 202, 203, 204, 205, 206, 207,
+ 208, 209, 210, 211, 212, 213, 214, 215,
+ 216, 217, 218, 219, 220, 221, 222, 223,
+ 224, 225, 226, 227, 228, 229, 230, 231,
+ 232, 233, 234, 235, 236, 237, 238, 239,
+ 240, 241, 242, 243, 244, 245, 246, 247,
+ 248, 249, 250, 251, 252, 253, 254, 255,
+ 256, 257, 258, 259, 260, 261, 262, 263,
+ },
+ .oobfree = { {2, 6}, {264, 80} },
+};
/*
* Generic flash bbt descriptors
if (mtd->writesize > 512) {
nand_fcr0 =
(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
+ (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
+ (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1, 0);
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fir1,
+ (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_RDSTAT <<
+ IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT));
} else {
nand_fcr0 = ((NAND_CMD_PAGEPROG <<
IFC_NAND_FCR0_CMD1_SHIFT) |
(NAND_CMD_SEQIN <<
- IFC_NAND_FCR0_CMD2_SHIFT));
+ IFC_NAND_FCR0_CMD2_SHIFT) |
+ (NAND_CMD_STATUS <<
+ IFC_NAND_FCR0_CMD3_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1,
- (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_RDSTAT <<
+ IFC_NAND_FIR1_OP7_SHIFT) |
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT));
if (column >= mtd->writesize)
nand_fcr0 |=
priv->bufnum_mask = 1;
break;
+ case CSOR_NAND_PGS_8K:
+ if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+ CSOR_NAND_ECC_MODE_4) {
+ layout = &oob_8192_ecc4;
+ nand->ecc.strength = 4;
+ } else {
+ layout = &oob_8192_ecc8;
+ nand->ecc.strength = 8;
+ nand->ecc.bytes = 16;
+ }
+
+ priv->bufnum_mask = 0;
+ break;
+
+
default:
printf("ifc nand: bad csor %#x: bad page size\n", csor);
return -ENODEV;
port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
- if (csor & CSOR_NAND_PGS_4K) {
+ if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) {
+ page_size = 8192;
+ bufnum_mask = 0x0;
+ } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) {
page_size = 4096;
bufnum_mask = 0x1;
- } else if (csor & CSOR_NAND_PGS_2K) {
+ } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) {
page_size = 2048;
bufnum_mask = 0x3;
} else {
#include <asm/errno.h>
#include <asm/arch/cpu.h>
#include <asm/omap_gpmc.h>
-#include <asm/arch/elm.h>
+#include <asm/omap_elm.h>
#define ELM_DEFAULT_POLY (0)
for (i = 0; i < *error_count; i++) {
error_locations[i] =
- readl(&elm_cfg->error_location[poly].error_location_x[i]);
+ readl(&elm_cfg->error_location[poly].error_location_x[i]);
}
return 0;
{
/* initiate reset */
writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
- &elm_cfg->sysconfig);
+ &elm_cfg->sysconfig);
/* wait for reset complete and normal operation */
while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=
#include <linux/bch.h>
#include <linux/compiler.h>
#include <nand.h>
-#ifdef CONFIG_AM33XX
-#include <asm/arch/elm.h>
-#endif
+#include <asm/omap_elm.h>
+
+#define BADBLOCK_MARKER_LENGTH 2
+#define SECTOR_BYTES 512
static uint8_t cs;
-static __maybe_unused struct nand_ecclayout hw_nand_oob =
- GPMC_NAND_HW_ECC_LAYOUT;
-static __maybe_unused struct nand_ecclayout hw_bch8_nand_oob =
- GPMC_NAND_HW_BCH8_ECC_LAYOUT;
+static __maybe_unused struct nand_ecclayout omap_ecclayout;
/*
* omap_nand_hwcontrol - Set the address pointers corretly for the
uint8_t type;
uint8_t nibbles;
struct bch_control *control;
+ enum omap_ecc ecc_scheme;
};
/* bch types */
{
uint32_t val;
uint32_t dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1;
-#ifdef CONFIG_AM33XX
uint32_t unused_length = 0;
-#endif
uint32_t wr_mode = BCH_WRAPMODE_6;
struct nand_bch_priv *bch = chip->priv;
/* Clear the ecc result registers, select ecc reg as 1 */
writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
-#ifdef CONFIG_AM33XX
- wr_mode = BCH_WRAPMODE_1;
+ if (bch->ecc_scheme == OMAP_ECC_BCH8_CODE_HW) {
+ wr_mode = BCH_WRAPMODE_1;
switch (bch->nibbles) {
case ECC_BCH4_NIBBLES:
val |= (unused_length << 22);
break;
}
-#else
+ } else {
/*
* This ecc_size_config setting is for BCH sw library.
*
* size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
*/
val = (32 << 22) | (0 << 12);
-#endif
+ }
/* ecc size configuration */
writel(val, &gpmc_cfg->ecc_size_config);
}
/*
- * BCH8 support (needs ELM and thus AM33xx-only)
+ * BCH support using ELM module
*/
-#ifdef CONFIG_AM33XX
+#ifdef CONFIG_NAND_OMAP_ELM
/*
* omap_read_bch8_result - Read BCH result for BCH8 level
*
}
return 0;
}
-#endif /* CONFIG_AM33XX */
+#endif /* CONFIG_NAND_OMAP_ELM */
/*
* OMAP3 BCH8 support (with BCH library)
*/
-#ifdef CONFIG_NAND_OMAP_BCH8
+#ifdef CONFIG_BCH
/*
- * omap_calculate_ecc_bch - Read BCH ECC result
+ * omap_calculate_ecc_bch_sw - Read BCH ECC result
*
* @mtd: MTD device structure
* @dat: The pointer to data on which ecc is computed (unused here)
* @ecc: The ECC output buffer
*/
-static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat,
+static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc)
{
int ret = 0;
}
/**
- * omap_correct_data_bch - Decode received data and correct errors
+ * omap_correct_data_bch_sw - Decode received data and correct errors
* @mtd: MTD device structure
* @data: page data
* @read_ecc: ecc read from nand flash
* @calc_ecc: ecc read from HW ECC registers
*/
-static int omap_correct_data_bch(struct mtd_info *mtd, u_char *data,
+static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
u_char *read_ecc, u_char *calc_ecc)
{
int i, count;
chip_priv->control = NULL;
}
}
-#endif /* CONFIG_NAND_OMAP_BCH8 */
+#endif /* CONFIG_BCH */
+
+/**
+ * omap_select_ecc_scheme - configures driver for particular ecc-scheme
+ * @nand: NAND chip device structure
+ * @ecc_scheme: ecc scheme to configure
+ * @pagesize: number of main-area bytes per page of NAND device
+ * @oobsize: number of OOB/spare bytes per page of NAND device
+ */
+static int omap_select_ecc_scheme(struct nand_chip *nand,
+ enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
+ struct nand_bch_priv *bch = nand->priv;
+ struct nand_ecclayout *ecclayout = nand->ecc.layout;
+ int eccsteps = pagesize / SECTOR_BYTES;
+ int i;
+
+ switch (ecc_scheme) {
+ case OMAP_ECC_HAM1_CODE_SW:
+ debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n");
+ /* For this ecc-scheme, ecc.bytes, ecc.layout, ... are
+ * initialized in nand_scan_tail(), so just set ecc.mode */
+ bch_priv.control = NULL;
+ bch_priv.type = 0;
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->ecc.layout = NULL;
+ nand->ecc.size = pagesize;
+ bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW;
+ break;
+
+ case OMAP_ECC_HAM1_CODE_HW:
+ debug("nand: selected OMAP_ECC_HAM1_CODE_HW\n");
+ /* check ecc-scheme requirements before updating ecc info */
+ if ((3 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+ printf("nand: error: insufficient OOB: require=%d\n", (
+ (3 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+ return -EINVAL;
+ }
+ bch_priv.control = NULL;
+ bch_priv.type = 0;
+ /* populate ecc specific fields */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.strength = 1;
+ nand->ecc.size = SECTOR_BYTES;
+ nand->ecc.bytes = 3;
+ nand->ecc.hwctl = omap_enable_hwecc;
+ nand->ecc.correct = omap_correct_data;
+ nand->ecc.calculate = omap_calculate_ecc;
+ /* define ecc-layout */
+ ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
+ for (i = 0; i < ecclayout->eccbytes; i++)
+ ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+ BADBLOCK_MARKER_LENGTH;
+ bch->ecc_scheme = OMAP_ECC_HAM1_CODE_HW;
+ break;
+
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+#ifdef CONFIG_BCH
+ debug("nand: selected OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
+ /* check ecc-scheme requirements before updating ecc info */
+ if ((13 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+ printf("nand: error: insufficient OOB: require=%d\n", (
+ (13 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+ return -EINVAL;
+ }
+ /* check if BCH S/W library can be used for error detection */
+ bch_priv.control = init_bch(13, 8, 0x201b);
+ if (!bch_priv.control) {
+ printf("nand: error: could not init_bch()\n");
+ return -ENODEV;
+ }
+ bch_priv.type = ECC_BCH8;
+ /* populate ecc specific fields */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.strength = 8;
+ nand->ecc.size = SECTOR_BYTES;
+ nand->ecc.bytes = 13;
+ nand->ecc.hwctl = omap_enable_ecc_bch;
+ nand->ecc.correct = omap_correct_data_bch_sw;
+ nand->ecc.calculate = omap_calculate_ecc_bch_sw;
+ /* define ecc-layout */
+ ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
+ ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
+ for (i = 1; i < ecclayout->eccbytes; i++) {
+ if (i % nand->ecc.bytes)
+ ecclayout->eccpos[i] =
+ ecclayout->eccpos[i - 1] + 1;
+ else
+ ecclayout->eccpos[i] =
+ ecclayout->eccpos[i - 1] + 2;
+ }
+ ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+ BADBLOCK_MARKER_LENGTH;
+ omap_hwecc_init_bch(nand, NAND_ECC_READ);
+ bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+ break;
+#else
+ printf("nand: error: CONFIG_BCH required for ECC\n");
+ return -EINVAL;
+#endif
+
+ case OMAP_ECC_BCH8_CODE_HW:
+#ifdef CONFIG_NAND_OMAP_ELM
+ debug("nand: selected OMAP_ECC_BCH8_CODE_HW\n");
+ /* check ecc-scheme requirements before updating ecc info */
+ if ((14 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+ printf("nand: error: insufficient OOB: require=%d\n", (
+ (14 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+ return -EINVAL;
+ }
+ /* intialize ELM for ECC error detection */
+ elm_init();
+ bch_priv.type = ECC_BCH8;
+ /* populate ecc specific fields */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.strength = 8;
+ nand->ecc.size = SECTOR_BYTES;
+ nand->ecc.bytes = 14;
+ nand->ecc.hwctl = omap_enable_ecc_bch;
+ nand->ecc.correct = omap_correct_data_bch;
+ nand->ecc.calculate = omap_calculate_ecc_bch;
+ nand->ecc.read_page = omap_read_page_bch;
+ /* define ecc-layout */
+ ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
+ for (i = 0; i < ecclayout->eccbytes; i++)
+ ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+ BADBLOCK_MARKER_LENGTH;
+ bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW;
+ break;
+#else
+ printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
+ return -EINVAL;
+#endif
+
+ default:
+ debug("nand: error: ecc scheme not enabled or supported\n");
+ return -EINVAL;
+ }
+ return 0;
+}
#ifndef CONFIG_SPL_BUILD
/*
* @eccstrength - the number of bits that could be corrected
* (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16)
*/
-void omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
+int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
{
struct nand_chip *nand;
struct mtd_info *mtd;
+ int err = 0;
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!nand_info[nand_curr_device].name) {
- printf("Error: Can't switch ecc, no devices available\n");
- return;
+ printf("nand: error: no NAND devices found\n");
+ return -ENODEV;
}
mtd = &nand_info[nand_curr_device];
nand = mtd->priv;
-
nand->options |= NAND_OWN_BUFFERS;
-
- /* Reset ecc interface */
- nand->ecc.mode = NAND_ECC_NONE;
- nand->ecc.read_page = NULL;
- nand->ecc.write_page = NULL;
- nand->ecc.read_oob = NULL;
- nand->ecc.write_oob = NULL;
- nand->ecc.hwctl = NULL;
- nand->ecc.correct = NULL;
- nand->ecc.calculate = NULL;
- nand->ecc.strength = eccstrength;
-
/* Setup the ecc configurations again */
if (hardware) {
if (eccstrength == 1) {
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.layout = &hw_nand_oob;
- nand->ecc.size = 512;
- nand->ecc.bytes = 3;
- nand->ecc.hwctl = omap_enable_hwecc;
- nand->ecc.correct = omap_correct_data;
- nand->ecc.calculate = omap_calculate_ecc;
- omap_hwecc_init(nand);
- printf("1-bit hamming HW ECC selected\n");
- }
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
- else if (eccstrength == 8) {
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.layout = &hw_bch8_nand_oob;
- nand->ecc.size = 512;
-#ifdef CONFIG_AM33XX
- nand->ecc.bytes = 14;
- nand->ecc.read_page = omap_read_page_bch;
-#else
- nand->ecc.bytes = 13;
-#endif
- nand->ecc.hwctl = omap_enable_ecc_bch;
- nand->ecc.correct = omap_correct_data_bch;
- nand->ecc.calculate = omap_calculate_ecc_bch;
- omap_hwecc_init_bch(nand, NAND_ECC_READ);
- printf("8-bit BCH HW ECC selected\n");
+ err = omap_select_ecc_scheme(nand,
+ OMAP_ECC_HAM1_CODE_HW,
+ mtd->writesize, mtd->oobsize);
+ } else if (eccstrength == 8) {
+ err = omap_select_ecc_scheme(nand,
+ OMAP_ECC_BCH8_CODE_HW,
+ mtd->writesize, mtd->oobsize);
+ } else {
+ printf("nand: error: unsupported ECC scheme\n");
+ return -EINVAL;
}
-#endif
} else {
- nand->ecc.mode = NAND_ECC_SOFT;
- /* Use mtd default settings */
- nand->ecc.layout = NULL;
- nand->ecc.size = 0;
- printf("SW ECC selected\n");
+ err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+ mtd->writesize, mtd->oobsize);
}
/* Update NAND handling after ECC mode switch */
- nand_scan_tail(mtd);
-
- nand->options &= ~NAND_OWN_BUFFERS;
+ if (!err)
+ err = nand_scan_tail(mtd);
+ return err;
}
#endif /* CONFIG_SPL_BUILD */
{
int32_t gpmc_config = 0;
cs = 0;
-
+ int err = 0;
/*
* xloader/Uboot's gpmc configuration would have configured GPMC for
* nand type of memory. The following logic scans and latches on to the
cs++;
}
if (cs >= GPMC_MAX_CS) {
- printf("NAND: Unable to find NAND settings in "
+ printf("nand: error: Unable to find NAND settings in "
"GPMC Configuration - quitting\n");
return -ENODEV;
}
nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
-
- nand->cmd_ctrl = omap_nand_hwcontrol;
- nand->options = NAND_NO_PADDING | NAND_CACHEPRG;
+ nand->priv = &bch_priv;
+ nand->cmd_ctrl = omap_nand_hwcontrol;
+ nand->options |= NAND_NO_PADDING | NAND_CACHEPRG;
/* If we are 16 bit dev, our gpmc config tells us that */
if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
nand->options |= NAND_BUSWIDTH_16;
nand->chip_delay = 100;
+ nand->ecc.layout = &omap_ecclayout;
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
-#ifdef CONFIG_AM33XX
- /* AM33xx uses the ELM */
- /* required in case of BCH */
- elm_init();
-#else
- /*
- * Whereas other OMAP based SoC do not have the ELM, they use the BCH
- * SW library.
- */
- bch_priv.control = init_bch(13, 8, 0x201b /* hw polynominal */);
- if (!bch_priv.control) {
- puts("Could not init_bch()\n");
- return -ENODEV;
- }
-#endif
- /* BCH info that will be correct for SPL or overridden otherwise. */
- nand->priv = &bch_priv;
-#endif
-
- /* Default ECC mode */
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.layout = &hw_bch8_nand_oob;
- nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
- nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
- nand->ecc.strength = 8;
- nand->ecc.hwctl = omap_enable_ecc_bch;
- nand->ecc.correct = omap_correct_data_bch;
- nand->ecc.calculate = omap_calculate_ecc_bch;
-#ifdef CONFIG_AM33XX
- nand->ecc.read_page = omap_read_page_bch;
-#endif
- omap_hwecc_init_bch(nand, NAND_ECC_READ);
-#else
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC)
- nand->ecc.mode = NAND_ECC_SOFT;
+ /* select ECC scheme */
+#if defined(CONFIG_NAND_OMAP_ECCSCHEME)
+ err = omap_select_ecc_scheme(nand, CONFIG_NAND_OMAP_ECCSCHEME,
+ CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE);
#else
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.layout = &hw_nand_oob;
- nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
- nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
- nand->ecc.hwctl = omap_enable_hwecc;
- nand->ecc.correct = omap_correct_data;
- nand->ecc.calculate = omap_calculate_ecc;
- nand->ecc.strength = 1;
- omap_hwecc_init(nand);
-#endif
+ /* pagesize and oobsize are not required to configure sw ecc-scheme */
+ err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+ 0, 0);
#endif
+ if (err)
+ return err;
#ifdef CONFIG_SPL_BUILD
if (nand->options & NAND_BUSWIDTH_16)
uint8_t *oob_buf = this->oob_buf;
free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+ i++, free++) {
if (readcol >= lastgap)
readcol += free->offset - lastgap;
if (readend >= lastgap)
}
this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+ i++, free++) {
int free_end = free->offset + free->length;
if (free->offset < readend && free_end > readcol) {
int st = max_t(int,free->offset,readcol);
unsigned int i;
free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+ i++, free++) {
if (writecol >= lastgap)
writecol += free->offset - lastgap;
if (writeend >= lastgap)
lastgap = free->offset + free->length;
}
free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+ i++, free++) {
int free_end = free->offset + free->length;
if (free->offset < writeend && free_end > writecol) {
int st = max_t(int,free->offset,writecol);
* the out of band area
*/
this->ecclayout->oobavail = 0;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
+
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE &&
this->ecclayout->oobfree[i].length; i++)
this->ecclayout->oobavail +=
this->ecclayout->oobfree[i].length;
ulong start;
int timeout = CONFIG_MACRESET_TIMEOUT;
- writel(DMAMAC_SRST, &dma_p->busmode);
+ writel(readl(&dma_p->busmode) | DMAMAC_SRST, &dma_p->busmode);
if (priv->interface != PHY_INTERFACE_MODE_RGMII)
writel(MII_PORTSELECT, &mac_p->conf);
u32 dmamac_cntl;
void *dmamac_addr;
struct dmamacdescr *dmamac_next;
-};
+} __aligned(16);
/*
* txrx_status definitions
u32 tx_currdescnum;
u32 rx_currdescnum;
u32 phy_configured;
- int link_printed;
- u32 padding;
+ u32 link_printed;
struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
struct eth_dma_regs *dma_regs_p;
struct eth_device *dev;
-} __attribute__ ((aligned(8)));
+};
/* Speed specific definitions */
#define SPEED_10M 1
DM9000_iow(DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS);
printf("MAC: %pM\n", dev->enetaddr);
+ if (!is_valid_ether_addr(dev->enetaddr)) {
+#ifdef CONFIG_RANDOM_MACADDR
+ printf("Bad MAC address (uninitialized EEPROM?), randomizing\n");
+ eth_random_enetaddr(dev->enetaddr);
+ printf("MAC: %pM\n", dev->enetaddr);
+#else
+ printf("WARNING: Bad MAC address (uninitialized EEPROM?)\n");
+#endif
+ }
/* fill device MAC address registers */
for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
static int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
static int e1000_phy_reset(struct e1000_hw *hw);
static int e1000_detect_gig_phy(struct e1000_hw *hw);
-static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
static void e1000_set_media_type(struct e1000_hw *hw);
static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
+#ifndef CONFIG_E1000_NO_NVM
+static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
uint16_t words,
uint16_t *data);
return -E1000_ERR_EEPROM;
}
+#endif /* CONFIG_E1000_NO_NVM */
/*****************************************************************************
* Set PHY to class A mode
static int32_t
e1000_set_phy_mode(struct e1000_hw *hw)
{
+#ifndef CONFIG_E1000_NO_NVM
int32_t ret_val;
uint16_t eeprom_data;
hw->phy_reset_disable = false;
}
}
-
+#endif
return E1000_SUCCESS;
}
+#ifndef CONFIG_E1000_NO_NVM
/***************************************************************************
*
* Obtaining software semaphore bit (SMBI) before resetting PHY.
return E1000_SUCCESS;
}
+#endif
/***************************************************************************
* This function clears HW semaphore bits.
static void
e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
{
+#ifndef CONFIG_E1000_NO_NVM
uint32_t swsm;
DEBUGFUNC();
} else
swsm &= ~(E1000_SWSM_SWESMBI);
E1000_WRITE_REG(hw, SWSM, swsm);
+#endif
}
/***************************************************************************
static int32_t
e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
{
+#ifndef CONFIG_E1000_NO_NVM
int32_t timeout;
uint32_t swsm;
"SWESMBI bit is set.\n");
return -E1000_ERR_EEPROM;
}
-
+#endif
return E1000_SUCCESS;
}
}
}
+#ifndef CONFIG_E1000_NO_NVM
/******************************************************************************
* Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
* second function of dual function devices
#endif
return 0;
}
+#endif
/******************************************************************************
* Initializes receive address filters.
e1000_setup_link(struct eth_device *nic)
{
struct e1000_hw *hw = nic->priv;
- uint32_t ctrl_ext;
int32_t ret_val;
+#ifndef CONFIG_E1000_NO_NVM
+ uint32_t ctrl_ext;
uint16_t eeprom_data;
+#endif
DEBUGFUNC();
if (e1000_check_phy_reset_block(hw))
return E1000_SUCCESS;
+#ifndef CONFIG_E1000_NO_NVM
/* Read and store word 0x0F of the EEPROM. This word contains bits
* that determine the hardware's default PAUSE (flow control) mode,
* a bit that determines whether the HW defaults to enabling or
DEBUGOUT("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
-
+#endif
if (hw->fc == e1000_fc_default) {
switch (hw->mac_type) {
case e1000_ich8lan:
hw->fc = e1000_fc_full;
break;
default:
+#ifndef CONFIG_E1000_NO_NVM
ret_val = e1000_read_eeprom(hw,
EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
if (ret_val) {
EEPROM_WORD0F_ASM_DIR)
hw->fc = e1000_fc_tx_pause;
else
+#endif
hw->fc = e1000_fc_full;
break;
}
DEBUGOUT("After fix-ups FlowControl is now = %x\n", hw->fc);
+#ifndef CONFIG_E1000_NO_NVM
/* Take the 4 bits from EEPROM word 0x0F that determine the initial
* polarity value for the SW controlled pins, and setup the
* Extended Device Control reg with that info.
SWDPIO__EXT_SHIFT);
E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
}
+#endif
/* Call the necessary subroutine to configure the link. */
ret_val = (hw->media_type == e1000_media_type_fiber) ?
e1000_reset_hw(hw);
list_add_tail(&hw->list_node, &e1000_hw_list);
+#ifndef CONFIG_E1000_NO_NVM
/* Validate the EEPROM and get chipset information */
#if !defined(CONFIG_MVBC_1G)
if (e1000_init_eeprom_params(hw)) {
continue;
#endif
e1000_read_mac_addr(nic);
+#endif
e1000_get_bus_type(hw);
+#ifndef CONFIG_E1000_NO_NVM
printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n ",
nic->enetaddr[0], nic->enetaddr[1], nic->enetaddr[2],
nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]);
+#else
+ memset(nic->enetaddr, 0, 6);
+ printf("e1000: no NVM\n");
+#endif
/* Set up the function pointers and register the device */
nic->init = e1000_init;
/* Internal E1000 helper functions */
struct e1000_hw *e1000_find_card(unsigned int cardnum);
+
+#ifndef CONFIG_E1000_NO_NVM
int32_t e1000_acquire_eeprom(struct e1000_hw *hw);
void e1000_standby_eeprom(struct e1000_hw *hw);
void e1000_release_eeprom(struct e1000_hw *hw);
void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
+#endif
#ifdef CONFIG_E1000_SPI
int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
uint64_t tsctfc;
};
+#ifndef CONFIG_E1000_NO_NVM
struct e1000_eeprom_info {
e1000_eeprom_type type;
uint16_t word_size;
bool use_eerd;
bool use_eewr;
};
+#endif
typedef enum {
e1000_smart_speed_default = 0,
uint32_t io_base;
#endif
uint32_t asf_firmware_present;
+#ifndef CONFIG_E1000_NO_NVM
uint32_t eeprom_semaphore_present;
+#endif
uint32_t swfw_sync_present;
uint32_t swfwhw_semaphore_present;
+#ifndef CONFIG_E1000_NO_NVM
struct e1000_eeprom_info eeprom;
+#endif
e1000_ms_type master_slave;
e1000_ms_type original_master_slave;
e1000_ffe_config ffe_config_state;
/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010, 2013 Freescale Semiconductor, Inc.
* Jun-jie Zhang <b18070@freescale.com>
* Mingkai Hu <Mingkai.hu@freescale.com>
*
#include <asm/errno.h>
#include <asm/fsl_enet.h>
-void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr,
int dev_addr, int regnum, int value)
{
int timeout = 1000000;
;
}
-int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr,
int dev_addr, int regnum)
{
int value;
static int fsl_pq_mdio_reset(struct mii_dev *bus)
{
- struct tsec_mii_mng *regs = bus->priv;
+ struct tsec_mii_mng __iomem *regs =
+ (struct tsec_mii_mng __iomem *)bus->priv;
/* Reset MII (due to new addresses) */
out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT);
int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum)
{
- struct tsec_mii_mng *phyregs = bus->priv;
+ struct tsec_mii_mng __iomem *phyregs =
+ (struct tsec_mii_mng __iomem *)bus->priv;
return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum);
}
int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
u16 value)
{
- struct tsec_mii_mng *phyregs = bus->priv;
+ struct tsec_mii_mng __iomem *phyregs =
+ (struct tsec_mii_mng __iomem *)bus->priv;
tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value);
bus->reset = fsl_pq_mdio_reset;
sprintf(bus->name, info->name);
- bus->priv = info->regs;
+ bus->priv = (void *)info->regs;
return mdio_register(bus);
}
{
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
struct mvgbe_registers *regs = dmvgbe->regs;
-#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \
- && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
+#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && \
+ !defined(CONFIG_PHYLIB) && \
+ defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
int i;
#endif
/* setup RX rings */
LOCAL_CFLAGS += -I$(TOPDIR)/drivers/net/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux
CFLAGS += $(LOCAL_CFLAGS)
CPPFLAGS += $(LOCAL_CFLAGS) # needed for depend
-HOSTCFLAGS += $(LOCAL_CFLAGS)
obj-y := npe.o \
miiphy.o \
static struct phy_driver AR8021_driver = {
.name = "AR8021",
.uid = 0x4dd040,
- .mask = 0xfffff0,
+ .mask = 0x4fffff,
.features = PHY_GBIT_FEATURES,
.config = ar8021_config,
.startup = genphy_startup,
};
static struct phy_driver AR8031_driver = {
- .name = "AR8031",
+ .name = "AR8031/AR8033",
.uid = 0x4dd074,
- .mask = 0xfffff0,
+ .mask = 0x4fffff,
.features = PHY_GBIT_FEATURES,
- .config = genphy_config,
+ .config = ar8021_config,
.startup = genphy_startup,
.shutdown = genphy_shutdown,
};
return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR);
}
+
+static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr,
+ int regnum)
+{
+ return ksz9021_phy_extended_read(phydev, regnum);
+}
+
+static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr,
+ int devaddr, int regnum, u16 val)
+{
+ return ksz9021_phy_extended_write(phydev, regnum, val);
+}
+
/* Micrel ksz9021 */
static int ksz9021_config(struct phy_device *phydev)
{
.config = &ksz9021_config,
.startup = &ksz90xx_startup,
.shutdown = &genphy_shutdown,
+ .writeext = &ksz9021_phy_extwrite,
+ .readext = &ksz9021_phy_extread,
};
#endif
return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA);
}
+static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr,
+ int regnum)
+{
+ return ksz9031_phy_extended_read(phydev, devaddr, regnum,
+ MII_KSZ9031_MOD_DATA_NO_POST_INC);
+};
+
+static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr,
+ int devaddr, int regnum, u16 val)
+{
+ return ksz9031_phy_extended_write(phydev, devaddr, regnum,
+ MII_KSZ9031_MOD_DATA_POST_INC_RW, val);
+};
+
+
static struct phy_driver ksz9031_driver = {
.name = "Micrel ksz9031",
.uid = 0x221620,
- .mask = 0xfffffe,
+ .mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &genphy_config,
.startup = &ksz90xx_startup,
.shutdown = &genphy_shutdown,
+ .writeext = &ksz9031_phy_extwrite,
+ .readext = &ksz9031_phy_extread,
};
int phy_micrel_init(void)
int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
/* We're using autonegotiation */
- if (mii_reg & BMSR_ANEGCAPABLE) {
+ if (phydev->supported & SUPPORTED_Autoneg) {
u32 lpa = 0;
int gblpa = 0;
u32 estatus = 0;
/* Check for gigabit capability */
- if (mii_reg & BMSR_ERCAP) {
+ if (phydev->supported & (SUPPORTED_1000baseT_Full |
+ SUPPORTED_1000baseT_Half)) {
/* We want a list of states supported by
* both PHYs in the link
*/
static struct phy_driver RTL8211B_driver = {
.name = "RealTek RTL8211B",
.uid = 0x1cc910,
- .mask = 0xfffff0,
+ .mask = 0xffffff,
.features = PHY_GBIT_FEATURES,
.config = &rtl8211x_config,
.startup = &rtl8211x_startup,
static struct phy_driver RTL8211E_driver = {
.name = "RealTek RTL8211E",
.uid = 0x1cc915,
- .mask = 0xfffff0,
+ .mask = 0xffffff,
.features = PHY_GBIT_FEATURES,
.config = &rtl8211x_config,
.startup = &rtl8211x_startup,
static struct phy_driver RTL8211DN_driver = {
.name = "RealTek RTL8211DN",
.uid = 0x1cc914,
- .mask = 0xfffff0,
+ .mask = 0xffffff,
.features = PHY_GBIT_FEATURES,
.config = &rtl8211x_config,
.startup = &rtl8211x_startup,
*/
#include <miiphy.h>
+/* This code does not check the partner abilities. */
static int smsc_parse_status(struct phy_device *phydev)
{
int mii_reg;
.mask = 0xffff0,
.features = PHY_BASIC_FEATURES,
.config = &genphy_config_aneg,
- .startup = &smsc_startup,
+ .startup = &genphy_startup,
.shutdown = &genphy_shutdown,
};
#define MIIM_VSC8574_18G_QSGMII 0x80e0
#define MIIM_VSC8574_18G_CMDSTAT 0x8000
+/* Vitesse VSC8514 control register */
+#define MIIM_VSC8514_GENERAL18 0x12
+#define MIIM_VSC8514_GENERAL19 0x13
+#define MIIM_VSC8514_GENERAL23 0x17
+
+/* Vitesse VSC8514 gerenal purpose register 18 */
+#define MIIM_VSC8514_18G_QSGMII 0x80e0
+#define MIIM_VSC8514_18G_CMDSTAT 0x8000
+
/* CIS8201 */
static int vitesse_config(struct phy_device *phydev)
{
static int vsc8574_config(struct phy_device *phydev)
{
u32 val;
- /* configure regiser 19G for MAC */
+ /* configure register 19G for MAC */
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
PHY_EXT_PAGE_ACCESS_GENERAL);
return 0;
}
+static int vsc8514_config(struct phy_device *phydev)
+{
+ u32 val;
+ int timeout = 1000000;
+
+ /* configure register to access 19G */
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
+ PHY_EXT_PAGE_ACCESS_GENERAL);
+
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19);
+ if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
+ /* set bit 15:14 to '01' for QSGMII mode */
+ val = (val & 0x3fff) | (1 << 14);
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MIIM_VSC8514_GENERAL19, val);
+ /* Enable 4 ports MAC QSGMII */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18,
+ MIIM_VSC8514_18G_QSGMII);
+ } else {
+ /*TODO Add SGMII functionality once spec sheet
+ * for VSC8514 defines complete functionality
+ */
+ }
+
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
+ /* When bit 15 is cleared the command has completed */
+ while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--)
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
+
+ if (0 == timeout) {
+ printf("PHY 8514 config failed\n");
+ return -1;
+ }
+
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
+
+ /* configure register to access 23 */
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23);
+ /* set bits 10:8 to '000' */
+ val = (val & 0xf8ff);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
static struct phy_driver VSC8211_driver = {
.name = "Vitesse VSC8211",
.uid = 0xfc4b0,
.shutdown = &genphy_shutdown,
};
+static struct phy_driver VSC8514_driver = {
+ .name = "Vitesse VSC8514",
+ .uid = 0x70570,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vsc8514_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
static struct phy_driver VSC8601_driver = {
.name = "Vitesse VSC8601",
.uid = 0x70420,
phy_register(&VSC8211_driver);
phy_register(&VSC8221_driver);
phy_register(&VSC8574_driver);
+ phy_register(&VSC8514_driver);
phy_register(&VSC8662_driver);
phy_register(&cis8201_driver);
phy_register(&cis8204_driver);
static int rtl_poll(struct eth_device *dev);
static void rtl_disable(struct eth_device *dev);
#ifdef CONFIG_MCAST_TFTP/* This driver already accepts all b/mcast */
-static int rtl_bcast_addr (struct eth_device *dev, u8 bcast_mac, u8 set)
+static int rtl_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, u8 set)
{
return (0);
}
{"RTL-8169sc/8110sc", 0x18, 0xff7e1880,},
{"RTL-8168b/8111sb", 0x30, 0xff7e1880,},
{"RTL-8168b/8111sb", 0x38, 0xff7e1880,},
+ {"RTL-8168d/8111d", 0x28, 0xff7e1880,},
+ {"RTL-8168evl/8111evl", 0x2e, 0xff7e1880,},
{"RTL-8101e", 0x34, 0xff7e1880,},
{"RTL-8100e", 0x32, 0xff7e1880,},
};
static struct pci_device_id supported[] = {
{PCI_VENDOR_ID_REALTEK, 0x8167},
+ {PCI_VENDOR_ID_REALTEK, 0x8168},
{PCI_VENDOR_ID_REALTEK, 0x8169},
{}
};
return 0;
}
+/*
+ * Cache maintenance functions. These are simple wrappers around the more
+ * general purpose flush_cache() and invalidate_dcache_range() functions.
+ */
+
+static void rtl_inval_rx_desc(struct RxDesc *desc)
+{
+ unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
+ unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
+
+ invalidate_dcache_range(start, end);
+}
+
+static void rtl_flush_rx_desc(struct RxDesc *desc)
+{
+ flush_cache((unsigned long)desc, sizeof(*desc));
+}
+
+static void rtl_inval_tx_desc(struct TxDesc *desc)
+{
+ unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
+ unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
+
+ invalidate_dcache_range(start, end);
+}
+
+static void rtl_flush_tx_desc(struct TxDesc *desc)
+{
+ flush_cache((unsigned long)desc, sizeof(*desc));
+}
+
+static void rtl_inval_buffer(void *buf, size_t size)
+{
+ unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1);
+ unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN);
+
+ invalidate_dcache_range(start, end);
+}
+
+static void rtl_flush_buffer(void *buf, size_t size)
+{
+ flush_cache((unsigned long)buf, size);
+}
+
/**************************************************************************
RECV - Receive a frame
***************************************************************************/
ioaddr = dev->iobase;
cur_rx = tpc->cur_rx;
- flush_cache((unsigned long)&tpc->RxDescArray[cur_rx],
- sizeof(struct RxDesc));
+
+ rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]);
+
if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
unsigned char rxdata[RX_BUF_LEN];
length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
status) & 0x00001FFF) - 4;
+ rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length);
memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
NetReceive(rxdata, length);
cpu_to_le32(OWNbit + RX_BUF_SIZE);
tpc->RxDescArray[cur_rx].buf_addr =
cpu_to_le32(bus_to_phys(tpc->RxBufferRing[cur_rx]));
- flush_cache((unsigned long)tpc->RxBufferRing[cur_rx],
- RX_BUF_SIZE);
+ rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]);
} else {
puts("Error Rx");
}
/* point to the current txb incase multiple tx_rings are used */
ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
memcpy(ptxb, (char *)packet, (int)length);
- flush_cache((unsigned long)ptxb, length);
+ rtl_flush_buffer(ptxb, length);
while (len < ETH_ZLEN)
ptxb[len++] = '\0';
cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
((len > ETH_ZLEN) ? len : ETH_ZLEN));
}
+ rtl_flush_tx_desc(&tpc->TxDescArray[entry]);
RTL_W8(TxPoll, 0x40); /* set polling bit */
tpc->cur_tx++;
to = currticks() + TX_TIMEOUT;
do {
- flush_cache((unsigned long)&tpc->TxDescArray[entry],
- sizeof(struct TxDesc));
+ rtl_inval_tx_desc(&tpc->TxDescArray[entry]);
} while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
&& (currticks() < to)); /* wait */
if (currticks() >= to) {
#ifdef DEBUG_RTL8169_TX
- puts ("tx timeout/error\n");
- printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+ puts("tx timeout/error\n");
+ printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
#endif
ret = 0;
} else {
RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
#ifdef DEBUG_RTL8169
- printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+ printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
#endif
}
tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
tpc->RxDescArray[i].buf_addr =
cpu_to_le32(bus_to_phys(tpc->RxBufferRing[i]));
- flush_cache((unsigned long)tpc->RxBufferRing[i], RX_BUF_SIZE);
+ rtl_flush_rx_desc(&tpc->RxDescArray[i]);
}
#ifdef DEBUG_RTL8169
- printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+ printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
#endif
}
txb[5] = dev->enetaddr[5];
#ifdef DEBUG_RTL8169
- printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+ printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
#endif
return 0;
}
int idx=0;
while(1){
+ unsigned int region;
+ u16 device;
+
/* Find RTL8169 */
if ((devno = pci_find_devices(supported, idx++)) < 0)
break;
- pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ pci_read_config_word(devno, PCI_DEVICE_ID, &device);
+ switch (device) {
+ case 0x8168:
+ region = 2;
+ break;
+
+ default:
+ region = 1;
+ break;
+ }
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase);
iobase &= ~0xf;
debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
* Copyright (C) 2008, 2011 Renesas Solutions Corp.
* Copyright (c) 2008, 2011 Nobuhiro Iwamatsu
* Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
+ * Copyright (C) 2013 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef CONFIG_SH_ETHER_PHY_ADDR
# error "Please define CONFIG_SH_ETHER_PHY_ADDR"
#endif
-#ifdef CONFIG_SH_ETHER_CACHE_WRITEBACK
-#define flush_cache_wback(addr, len) \
- dcache_wback_range((u32)addr, (u32)(addr + len - 1))
+
+#if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF)
+#define flush_cache_wback(addr, len) \
+ flush_dcache_range((u32)addr, (u32)(addr + len - 1))
#else
#define flush_cache_wback(...)
#endif
+#if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM)
+#define invalidate_cache(addr, len) \
+ { \
+ u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE; \
+ u32 start, end; \
+ \
+ start = (u32)addr; \
+ end = start + len; \
+ start &= ~(line_size - 1); \
+ end = ((end + line_size - 1) & ~(line_size - 1)); \
+ \
+ invalidate_dcache_range(start, end); \
+ }
+#else
+#define invalidate_cache(...)
+#endif
+
#define TIMEOUT_CNT 1000
int sh_eth_send(struct eth_device *dev, void *packet, int len)
/* Wait until packet is transmitted */
timeout = TIMEOUT_CNT;
- while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--)
+ do {
+ invalidate_cache(port_info->tx_desc_cur,
+ sizeof(struct tx_desc_s));
udelay(100);
+ } while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--);
if (timeout < 0) {
printf(SHETHER_NAME ": transmit timeout\n");
uchar *packet;
/* Check if the rx descriptor is ready */
+ invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s));
if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) {
/* Check for errors */
if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) {
len = port_info->rx_desc_cur->rd1 & 0xffff;
packet = (uchar *)
ADDR_TO_P2(port_info->rx_desc_cur->rd2);
+ invalidate_cache(packet, len);
NetReceive(packet, len);
}
port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
else
port_info->rx_desc_cur->rd0 = RD_RACT;
-
/* Point to the next descriptor */
port_info->rx_desc_cur++;
if (port_info->rx_desc_cur >=
* Allocate rx data buffers. They must be 32 bytes aligned and in
* P2 area
*/
- port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31);
+ port_info->rx_buf_malloc = malloc(
+ NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1);
if (!port_info->rx_buf_malloc) {
printf(SHETHER_NAME ": malloc failed\n");
ret = -ENOMEM;
goto err_buf_malloc;
}
- tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) &
- ~(32 - 1));
+ tmp_addr = (u32)(((int)port_info->rx_buf_malloc
+ + (RX_BUF_ALIGNE_SIZE - 1)) &
+ ~(RX_BUF_ALIGNE_SIZE - 1));
port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr);
/* Initialize all descriptors */
struct phy_device *phy;
/* Configure e-dmac registers */
- sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | EDMR_EL,
- EDMR);
+ sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) |
+ (EMDR_DESC | EDMR_EL), EDMR);
+
sh_eth_write(eth, 0, EESIPR);
sh_eth_write(eth, 0, TRSCER);
sh_eth_write(eth, 0, TFTR);
#if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740)
sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII);
+#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791)
+ sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR);
#endif
/* Configure phy */
ret = sh_eth_phy_config(eth);
sh_eth_write(eth, GECMR_100B, GECMR);
#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
sh_eth_write(eth, 1, RTRATE);
-#elif defined(CONFIG_CPU_SH7724)
+#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \
+ defined(CONFIG_R8A7791)
val = ECMR_RTM;
#endif
} else if (phy->speed == 10) {
#define ADDR_TO_P2(addr) (addr)
#endif /* defined(CONFIG_SH) */
+/* base padding size is 16 */
+#ifndef CONFIG_SH_ETHER_ALIGNE_SIZE
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 16
+#endif
+
/* Number of supported ports */
#define MAX_PORT_NUM 2
/* The size of the tx descriptor is determined by how much padding is used.
4, 20, or 52 bytes of padding can be used */
-#define TX_DESC_PADDING 4
-#define TX_DESC_SIZE (12 + TX_DESC_PADDING)
+#define TX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12)
+/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */
+#define TX_DESC_SIZE (12 + TX_DESC_PADDING)
/* Tx descriptor. We always use 3 bytes of padding */
struct tx_desc_s {
volatile u32 td0;
u32 td1;
u32 td2; /* Buffer start */
- u32 padding;
+ u8 padding[TX_DESC_PADDING]; /* aligned cache line size */
};
/* There is no limitation in the number of rx descriptors */
/* The size of the rx descriptor is determined by how much padding is used.
4, 20, or 52 bytes of padding can be used */
-#define RX_DESC_PADDING 4
+#define RX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12)
+/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */
#define RX_DESC_SIZE (12 + RX_DESC_PADDING)
+/* aligned cache line size */
+#define RX_BUF_ALIGNE_SIZE (CONFIG_SH_ETHER_ALIGNE_SIZE > 32 ? 64 : 32)
/* Rx descriptor. We always use 4 bytes of padding */
struct rx_desc_s {
volatile u32 rd0;
volatile u32 rd1;
u32 rd2; /* Buffer start */
- u32 padding;
+ u8 padding[TX_DESC_PADDING]; /* aligned cache line size */
};
struct sh_eth_info {
TLFRCR,
CERCR,
CEECR,
+ RMIIMR, /* R8A7790 */
MAFCR,
RTRATE,
CSMR,
[RMCR] = 0x0058,
[TFUCR] = 0x0064,
[RFOCR] = 0x0068,
+ [RMIIMR] = 0x006C,
[FCFTR] = 0x0070,
[RPADIR] = 0x0078,
[TRIMD] = 0x007c,
#elif defined(CONFIG_R8A7740)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xE9A00000
+#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791)
+#define SH_ETH_TYPE_ETHER
+#define BASE_IO_ADDR 0xEE700200
#endif
/*
#endif
};
+#if CONFIG_SH_ETHER_ALIGNE_SIZE == 64
+# define EMDR_DESC EDMR_DL1
+#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 32
+# define EMDR_DESC EDMR_DL0
+#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 16 /* Default */
+# define EMDR_DESC 0
+#endif
+
/* RFLR */
#define RFLR_RFL_MIN 0x05EE /* Recv Frame length 1518 byte */
ECMR_PRM = 0x00000001,
#ifdef CONFIG_CPU_SH7724
ECMR_RTM = 0x00000010,
+#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791)
+ ECMR_RTM = 0x00000004,
#endif
};
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004-2011 Freescale Semiconductor, Inc.
+ * Copyright 2004-2011, 2013 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* author Andy Fleming
*
#define TX_BUF_CNT 2
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-typedef volatile struct rtxbd {
- txbd8_t txbd[TX_BUF_CNT];
- rxbd8_t rxbd[PKTBUFSRX];
-} RTXBD;
-
-#define MAXCONTROLLERS (8)
-
-static struct tsec_private *privlist[MAXCONTROLLERS];
-static int num_tsecs = 0;
+static uint rx_idx; /* index of the current RX buffer */
+static uint tx_idx; /* index of the current TX buffer */
#ifdef __GNUC__
-static RTXBD rtx __attribute__ ((aligned(8)));
+static struct txbd8 __iomem txbd[TX_BUF_CNT] __aligned(8);
+static struct rxbd8 __iomem rxbd[PKTBUFSRX] __aligned(8);
+
#else
#error "rtx must be 64-bit aligned"
#endif
#endif
#ifdef CONFIG_MPC85XX_FEC
{
- .regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
+ .regs = TSEC_GET_REGS(2, 0x2000),
.devname = CONFIG_MPC85XX_FEC_NAME,
.phyaddr = FEC_PHY_ADDR,
.flags = FEC_FLAGS,
* result.
* 2) Use the 8 most significant bits as a hash into a 256-entry
* table. The table is controlled through 8 32-bit registers:
- * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is
- * gaddr7. This means that the 3 most significant bits in the
+ * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is entry
+ * 255. This means that the 3 most significant bits in the
* hash index which gaddr register to use, and the 5 other bits
* indicate which bit (assuming an IBM numbering scheme, which
- * for PowerPC (tm) is usually the case) in the tregister holds
+ * for PowerPC (tm) is usually the case) in the register holds
* the entry. */
static int
-tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
+tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set)
{
- struct tsec_private *priv = privlist[1];
- volatile tsec_t *regs = priv->regs;
- volatile u32 *reg_array, value;
- u8 result, whichbit, whichreg;
-
- result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff);
- whichbit = result & 0x1f; /* the 5 LSB = which bit to set */
- whichreg = result >> 5; /* the 3 MSB = which reg to set it in */
- value = (1 << (31-whichbit));
-
- reg_array = &(regs->hash.gaddr0);
-
- if (set) {
- reg_array[whichreg] |= value;
- } else {
- reg_array[whichreg] &= ~value;
- }
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ struct tsec __iomem *regs = priv->regs;
+ u32 result, value;
+ u8 whichbit, whichreg;
+
+ result = ether_crc(MAC_ADDR_LEN, mcast_mac);
+ whichbit = (result >> 24) & 0x1f; /* the 5 LSB = which bit to set */
+ whichreg = result >> 29; /* the 3 MSB = which reg to set it in */
+
+ value = 1 << (31-whichbit);
+
+ if (set)
+ setbits_be32(®s->hash.gaddr0 + whichreg, value);
+ else
+ clrbits_be32(®s->hash.gaddr0 + whichreg, value);
+
return 0;
}
#endif /* Multicast TFTP ? */
* those we don't care about (unless zero is bad, in which case,
* choose a more appropriate value)
*/
-static void init_registers(tsec_t *regs)
+static void init_registers(struct tsec __iomem *regs)
{
/* Clear IEVENT */
out_be32(®s->ievent, IEVENT_INIT_CLEAR);
out_be32(®s->rctrl, 0x00000000);
/* Init RMON mib registers */
- memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
+ memset((void *)®s->rmon, 0, sizeof(regs->rmon));
out_be32(®s->rmon.cam1, 0xffffffff);
out_be32(®s->rmon.cam2, 0xffffffff);
*/
static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
{
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
u32 ecntrl, maccfg2;
if (!phydev->link) {
void redundant_init(struct eth_device *dev)
{
struct tsec_private *priv = dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
uint t, count = 0;
int fail = 1;
static const u8 pkt[] = {
clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
do {
+ uint16_t status;
tsec_send(dev, (void *)pkt, sizeof(pkt));
/* Wait for buffer to be received */
- for (t = 0; rtx.rxbd[rxIdx].status & RXBD_EMPTY; t++) {
+ for (t = 0; in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY; t++) {
if (t >= 10 * TOUT_LOOP) {
printf("%s: tsec: rx error\n", dev->name);
break;
}
}
- if (!memcmp(pkt, (void *)NetRxPackets[rxIdx], sizeof(pkt)))
+ if (!memcmp(pkt, (void *)NetRxPackets[rx_idx], sizeof(pkt)))
fail = 0;
- rtx.rxbd[rxIdx].length = 0;
- rtx.rxbd[rxIdx].status =
- RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
- rxIdx = (rxIdx + 1) % PKTBUFSRX;
+ out_be16(&rxbd[rx_idx].length, 0);
+ status = RXBD_EMPTY;
+ if ((rx_idx + 1) == PKTBUFSRX)
+ status |= RXBD_WRAP;
+ out_be16(&rxbd[rx_idx].status, status);
+ rx_idx = (rx_idx + 1) % PKTBUFSRX;
if (in_be32(®s->ievent) & IEVENT_BSY) {
out_be32(®s->ievent, IEVENT_BSY);
*/
static void startup_tsec(struct eth_device *dev)
{
- int i;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
+ uint16_t status;
+ int i;
/* reset the indices to zero */
- rxIdx = 0;
- txIdx = 0;
+ rx_idx = 0;
+ tx_idx = 0;
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
uint svr;
#endif
/* Point to the buffer descriptors */
- out_be32(®s->tbase, (unsigned int)(&rtx.txbd[txIdx]));
- out_be32(®s->rbase, (unsigned int)(&rtx.rxbd[rxIdx]));
+ out_be32(®s->tbase, (u32)&txbd[0]);
+ out_be32(®s->rbase, (u32)&rxbd[0]);
/* Initialize the Rx Buffer descriptors */
for (i = 0; i < PKTBUFSRX; i++) {
- rtx.rxbd[i].status = RXBD_EMPTY;
- rtx.rxbd[i].length = 0;
- rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i];
+ out_be16(&rxbd[i].status, RXBD_EMPTY);
+ out_be16(&rxbd[i].length, 0);
+ out_be32(&rxbd[i].bufptr, (u32)NetRxPackets[i]);
}
- rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP;
+ status = in_be16(&rxbd[PKTBUFSRX - 1].status);
+ out_be16(&rxbd[PKTBUFSRX - 1].status, status | RXBD_WRAP);
/* Initialize the TX Buffer Descriptors */
for (i = 0; i < TX_BUF_CNT; i++) {
- rtx.txbd[i].status = 0;
- rtx.txbd[i].length = 0;
- rtx.txbd[i].bufPtr = 0;
+ out_be16(&txbd[i].status, 0);
+ out_be16(&txbd[i].length, 0);
+ out_be32(&txbd[i].bufptr, 0);
}
- rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
+ status = in_be16(&txbd[TX_BUF_CNT - 1].status);
+ out_be16(&txbd[TX_BUF_CNT - 1].status, status | TXBD_WRAP);
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
svr = get_svr();
*/
static int tsec_send(struct eth_device *dev, void *packet, int length)
{
- int i;
- int result = 0;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
+ uint16_t status;
+ int result = 0;
+ int i;
/* Find an empty buffer descriptor */
- for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+ for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) {
if (i >= TOUT_LOOP) {
debug("%s: tsec: tx buffers full\n", dev->name);
return result;
}
}
- rtx.txbd[txIdx].bufPtr = (uint) packet;
- rtx.txbd[txIdx].length = length;
- rtx.txbd[txIdx].status |=
- (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
+ out_be32(&txbd[tx_idx].bufptr, (u32)packet);
+ out_be16(&txbd[tx_idx].length, length);
+ status = in_be16(&txbd[tx_idx].status);
+ out_be16(&txbd[tx_idx].status, status |
+ (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT));
/* Tell the DMA to go */
out_be32(®s->tstat, TSTAT_CLEAR_THALT);
/* Wait for buffer to be transmitted */
- for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+ for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) {
if (i >= TOUT_LOOP) {
debug("%s: tsec: tx error\n", dev->name);
return result;
}
}
- txIdx = (txIdx + 1) % TX_BUF_CNT;
- result = rtx.txbd[txIdx].status & TXBD_STATS;
+ tx_idx = (tx_idx + 1) % TX_BUF_CNT;
+ result = in_be16(&txbd[tx_idx].status) & TXBD_STATS;
return result;
}
static int tsec_recv(struct eth_device *dev)
{
- int length;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
- while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
-
- length = rtx.rxbd[rxIdx].length;
+ while (!(in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY)) {
+ int length = in_be16(&rxbd[rx_idx].length);
+ uint16_t status = in_be16(&rxbd[rx_idx].status);
/* Send the packet up if there were no errors */
- if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) {
- NetReceive(NetRxPackets[rxIdx], length - 4);
- } else {
- printf("Got error %x\n",
- (rtx.rxbd[rxIdx].status & RXBD_STATS));
- }
+ if (!(status & RXBD_STATS))
+ NetReceive(NetRxPackets[rx_idx], length - 4);
+ else
+ printf("Got error %x\n", (status & RXBD_STATS));
- rtx.rxbd[rxIdx].length = 0;
+ out_be16(&rxbd[rx_idx].length, 0);
+ status = RXBD_EMPTY;
/* Set the wrap bit if this is the last element in the list */
- rtx.rxbd[rxIdx].status =
- RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
+ if ((rx_idx + 1) == PKTBUFSRX)
+ status |= RXBD_WRAP;
+ out_be16(&rxbd[rx_idx].status, status);
- rxIdx = (rxIdx + 1) % PKTBUFSRX;
+ rx_idx = (rx_idx + 1) % PKTBUFSRX;
}
if (in_be32(®s->ievent) & IEVENT_BSY) {
static void tsec_halt(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
setbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
*/
static int tsec_init(struct eth_device *dev, bd_t * bd)
{
- uint tempval;
- char tmpbuf[MAC_ADDR_LEN];
- int i;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
+ u32 tempval;
int ret;
/* Make sure the controller is stopped */
out_be32(®s->ecntrl, ECNTRL_INIT_SETTINGS);
/* Copy the station address into the address registers.
- * Backwards, because little endian MACS are dumb */
- for (i = 0; i < MAC_ADDR_LEN; i++)
- tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
-
- tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) |
- tmpbuf[3];
+ * For a station address of 0x12345678ABCD in transmission
+ * order (BE), MACnADDR1 is set to 0xCDAB7856 and
+ * MACnADDR2 is set to 0x34120000.
+ */
+ tempval = (dev->enetaddr[5] << 24) | (dev->enetaddr[4] << 16) |
+ (dev->enetaddr[3] << 8) | dev->enetaddr[2];
out_be32(®s->macstnaddr1, tempval);
- tempval = *((uint *) (tmpbuf + 4));
+ tempval = (dev->enetaddr[1] << 24) | (dev->enetaddr[0] << 16);
out_be32(®s->macstnaddr2, tempval);
static phy_interface_t tsec_get_interface(struct tsec_private *priv)
{
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
u32 ecntrl;
ecntrl = in_be32(®s->ecntrl);
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct phy_device *phydev;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
u32 supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
if (NULL == priv)
return 0;
- privlist[num_tsecs++] = priv;
priv->regs = tsec_info->regs;
priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
{
struct fsl_pq_mdio_info info;
- info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ info.regs = TSEC_GET_MDIO_REGS_BASE(1);
info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &info);
#define ZYNQ_GEM_TXBUF_WRAP_MASK 0x40000000
#define ZYNQ_GEM_TXBUF_LAST_MASK 0x00008000 /* Last buffer */
-#define ZYNQ_GEM_TXSR_HRESPNOK_MASK 0x00000100 /* Transmit hresp not OK */
-#define ZYNQ_GEM_TXSR_URUN_MASK 0x00000040 /* Transmit underrun */
-/* Transmit buffs exhausted mid frame */
-#define ZYNQ_GEM_TXSR_BUFEXH_MASK 0x00000010
-
#define ZYNQ_GEM_NWCTRL_TXEN_MASK 0x00000008 /* Enable transmit */
#define ZYNQ_GEM_NWCTRL_RXEN_MASK 0x00000004 /* Enable receive */
#define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */
*/
#define PHY_DETECT_MASK 0x1808
+/* TX BD status masks */
+#define ZYNQ_GEM_TXBUF_FRMLEN_MASK 0x000007ff
+#define ZYNQ_GEM_TXBUF_EXHAUSTED 0x08000000
+#define ZYNQ_GEM_TXBUF_UNDERRUN 0x10000000
+
/* Device registers */
struct zynq_gem_regs {
u32 nwctrl; /* Network Control reg */
};
#define RX_BUF 3
+/* Page table entries are set to 1MB, or multiples of 1MB
+ * (not < 1MB). driver uses less bd's so use 1MB bdspace.
+ */
+#define BD_SPACE 0x100000
+/* BD separation space */
+#define BD_SEPRN_SPACE 64
/* Initialized, rxbd_current, rx_first_buf must be 0 after init */
struct zynq_gem_priv {
- struct emac_bd tx_bd;
- struct emac_bd rx_bd[RX_BUF];
- char rxbuffers[RX_BUF * PKTSIZE_ALIGN];
+ struct emac_bd *tx_bd;
+ struct emac_bd *rx_bd;
+ char *rxbuffers;
u32 rxbd_current;
u32 rx_first_buf;
int phyaddr;
readl(®s->stat[i]);
/* Setup RxBD space */
- memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd));
- /* Create the RxBD ring */
- memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers));
+ memset(priv->rx_bd, 0, RX_BUF * sizeof(struct emac_bd));
for (i = 0; i < RX_BUF; i++) {
priv->rx_bd[i].status = 0xF0000000;
priv->rx_bd[i].addr =
- (u32)((char *)&(priv->rxbuffers) +
+ ((u32)(priv->rxbuffers) +
(i * PKTSIZE_ALIGN));
}
/* WRAP bit to last BD */
priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK;
/* Write RxBDs to IP */
- writel((u32)&(priv->rx_bd), ®s->rxqbase);
+ writel((u32)priv->rx_bd, ®s->rxqbase);
/* Setup for DMA Configuration register */
writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr);
static int zynq_gem_send(struct eth_device *dev, void *ptr, int len)
{
- u32 status;
+ u32 addr, size;
struct zynq_gem_priv *priv = dev->priv;
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
- const u32 mask = ZYNQ_GEM_TXSR_HRESPNOK_MASK | \
- ZYNQ_GEM_TXSR_URUN_MASK | ZYNQ_GEM_TXSR_BUFEXH_MASK;
/* setup BD */
- writel((u32)&(priv->tx_bd), ®s->txqbase);
+ writel((u32)priv->tx_bd, ®s->txqbase);
/* Setup Tx BD */
- memset((void *)&(priv->tx_bd), 0, sizeof(struct emac_bd));
+ memset(priv->tx_bd, 0, sizeof(struct emac_bd));
+
+ priv->tx_bd->addr = (u32)ptr;
+ priv->tx_bd->status = (len & ZYNQ_GEM_TXBUF_FRMLEN_MASK) |
+ ZYNQ_GEM_TXBUF_LAST_MASK;
- priv->tx_bd.addr = (u32)ptr;
- priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK;
+ addr = (u32) ptr;
+ addr &= ~(ARCH_DMA_MINALIGN - 1);
+ size = roundup(len, ARCH_DMA_MINALIGN);
+ flush_dcache_range(addr, addr + size);
+ barrier();
/* Start transmit */
setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK);
- /* Read the stat register to know if the packet has been transmitted */
- status = readl(®s->txsr);
- if (status & mask)
- printf("Something has gone wrong here!? Status is 0x%x.\n",
- status);
+ /* Read TX BD status */
+ if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_UNDERRUN)
+ printf("TX underrun\n");
+ if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_EXHAUSTED)
+ printf("TX buffers exhausted in mid frame\n");
- /* Clear Tx status register before leaving . */
- writel(status, ®s->txsr);
return 0;
}
frame_len = current_bd->status & ZYNQ_GEM_RXBUF_LEN_MASK;
if (frame_len) {
- NetReceive((u8 *) (current_bd->addr &
- ZYNQ_GEM_RXBUF_ADD_MASK), frame_len);
+ u32 addr = current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK;
+ addr &= ~(ARCH_DMA_MINALIGN - 1);
+ u32 size = roundup(frame_len, ARCH_DMA_MINALIGN);
+ invalidate_dcache_range(addr, addr + size);
+
+ NetReceive((u8 *)addr, frame_len);
if (current_bd->status & ZYNQ_GEM_RXBUF_SOF_MASK)
priv->rx_first_buf = priv->rxbd_current;
{
struct eth_device *dev;
struct zynq_gem_priv *priv;
+ void *bd_space;
dev = calloc(1, sizeof(*dev));
if (dev == NULL)
}
priv = dev->priv;
+ /* Align rxbuffers to ARCH_DMA_MINALIGN */
+ priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN);
+ memset(priv->rxbuffers, 0, RX_BUF * PKTSIZE_ALIGN);
+
+ /* Align bd_space to 1MB */
+ bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
+ mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE, DCACHE_OFF);
+
+ /* Initialize the bd spaces for tx and rx bd's */
+ priv->tx_bd = (struct emac_bd *)bd_space;
+ priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE);
+
priv->phyaddr = phy_addr;
priv->emio = emio;
include $(TOPDIR)/config.mk
# Resulting ELF and binary exectuables will be named demo and demo.bin
-OUTPUT-$(CONFIG_API) = $(obj)demo
-OUTPUT = $(OUTPUT-y)
+OUTPUT = $(obj)demo
# Source files located in the examples/api directory
-SOBJ_FILES-$(CONFIG_API) += crt0.o
-COBJ_FILES-$(CONFIG_API) += demo.o
-COBJ_FILES-$(CONFIG_API) += glue.o
-COBJ_FILES-$(CONFIG_API) += libgenwrap.o
+SOBJ_FILES-y += crt0.o
+COBJ_FILES-y += demo.o
+COBJ_FILES-y += glue.o
+COBJ_FILES-y += libgenwrap.o
# Source files which exist outside the examples/api directory
-EXT_COBJ_FILES-$(CONFIG_API) += lib/crc32.o
-EXT_COBJ_FILES-$(CONFIG_API) += lib/ctype.o
-EXT_COBJ_FILES-$(CONFIG_API) += lib/div64.o
-EXT_COBJ_FILES-$(CONFIG_API) += lib/string.o
-EXT_COBJ_FILES-$(CONFIG_API) += lib/time.o
-EXT_COBJ_FILES-$(CONFIG_API) += lib/vsprintf.o
-ifeq ($(ARCH),powerpc)
-EXT_SOBJ_FILES-$(CONFIG_API) += arch/powerpc/lib/ppcstring.o
-endif
+EXT_COBJ_FILES-y += lib/crc32.o
+EXT_COBJ_FILES-y += lib/ctype.o
+EXT_COBJ_FILES-y += lib/div64.o
+EXT_COBJ_FILES-y += lib/string.o
+EXT_COBJ_FILES-y += lib/time.o
+EXT_COBJ_FILES-y += lib/vsprintf.o
+EXT_SOBJ_FILES-$(CONFIG_PPC) += arch/powerpc/lib/ppcstring.o
# Create a list of source files so their dependencies can be auto-generated
SRCS += $(addprefix $(SRCTREE)/,$(EXT_COBJ_FILES-y:.o=.c))
OBJS += $(addprefix $(obj),$(notdir $(EXT_COBJ_FILES-y)))
OBJS += $(addprefix $(obj),$(notdir $(EXT_SOBJ_FILES-y)))
-CPPFLAGS += -I..
-
all: $(obj).depend $(OUTPUT)
#########################################################################
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
-CPPFLAGS += -I..
-
# For PowerPC there's no need to compile standalone applications as a
# relocatable executable. The relocation data is not needed, and
# also causes the entry point of the standalone application to be
{
}
-static inline phys_addr_t map_to_sysmem(void *ptr)
+static inline phys_addr_t map_to_sysmem(const void *ptr)
{
return (phys_addr_t)(uintptr_t)ptr;
}
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+#define CONFIG_SYS_NAND_MAX_ECCPOS 56
/*-----------------------------------------------------------------------
* PCI stuff
| CSPR_MSEL_NAND \
| CSPR_V)
#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+#define CONFIG_SYS_NAND_OOBSIZE 0x00000280 /* 640b */
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
- | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \
- | CSOR_NAND_PGS_2K /* Page Size = 2k */ \
- | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \
- | CSOR_NAND_PB(64)) /* 64 Pages Per Block */
+ | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \
+ | CSOR_NAND_PGS_8K /* Page Size = 8K */ \
+ | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\
+ | CSOR_NAND_PB(128)) /*128 Pages Per Block*/
#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \
FTIM0_NAND_TWP(0x0c) | \
FTIM0_NAND_TWCHT(0x08) | \
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CSOR1_EXT CONFIG_SYS_NAND_OOBSIZE
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_MAX_OOBFREE 5
+#define CONFIG_SYS_NAND_MAX_ECCPOS 56
/* NAND boot: 4K NAND loader config */
#define CONFIG_SYS_NAND_SPL_SIZE 0x1000
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+#define CONFIG_SYS_NAND_MAX_ECCPOS 256
#if defined(CONFIG_NAND)
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE + 0, CONFIG_SYS_NAND_BASE + 2, \
CONFIG_SYS_NAND_BASE + 4, CONFIG_SYS_NAND_BASE + 6 }
#define CONFIG_SYS_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+#define CONFIG_SYS_NAND_MAX_ECCPOS 56
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
#ifdef CONFIG_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#endif
/* NAND support */
#define CONFIG_NAND
#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
#define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
56, 57, 58, 59, 60, 61, 62, 63}
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#endif
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1000)
-#define CONFIG_PHYS_64BIT
#define CONFIG_SYS_FDT_LOAD_ADDR 0x1000000
/* Size of our emulated memory */
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_ECCSTEPS 4
#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
"\0"
#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */
/* to access nand at */
+++ /dev/null
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004-2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
-#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
-#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
-#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
-#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
-
-#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
-
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE 6 /* console is on PSC6 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#ifdef CONFIG_STK52XX
-#undef CONFIG_PS2KBD /* AT-PS/2 Keyboard */
-#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
-#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */
-#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */
-#define CONFIG_BOARD_EARLY_INIT_R
-#endif /* CONFIG_STK52XX */
-
-/*
- * PCI Mapping:
- * 0x40000000 - 0x4fffffff - PCI Memory
- * 0x50000000 - 0x50ffffff - PCI IO Space
- */
-#ifdef CONFIG_STK52XX
-#define CONFIG_PCI 1
-#define CONFIG_PCI_PNP 1
-/* #define CONFIG_PCI_SCAN_SHOW 1 */
-
-#define CONFIG_PCI_MEM_BUS 0x40000000
-#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE 0x10000000
-
-#define CONFIG_PCI_IO_BUS 0x50000000
-#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE 0x01000000
-
-#define CONFIG_EEPRO100 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_NS8382X 1
-#endif /* CONFIG_STK52XX */
-
-/*
- * Video console
- */
-#if 1
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_SM501
-#define CONFIG_VIDEO_SM501_32BPP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#endif
-
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-/* USB */
-#ifdef CONFIG_STK52XX
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
-#endif
-
-/* POST support */
-#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
- CONFIG_SYS_POST_CPU | \
- CONFIG_SYS_POST_I2C)
-
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-
-#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
- #define CONFIG_CMD_IDE
- #define CONFIG_CMD_FAT
- #define CONFIG_CMD_EXT2
-#endif
-
-#ifdef CONFIG_STK52XX
- #define CONFIG_CMD_USB
- #define CONFIG_CMD_FAT
-#endif
-
-#ifdef CONFIG_VIDEO
- #define CONFIG_CMD_BMP
-#endif
-
-#ifdef CONFIG_PCI
- #define CONFIG_CMD_PCI
- #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
-#endif
-
-#ifdef CONFIG_POST
-#define CONFIG_CMD_DIAG
-#endif
-
-
-#define CONFIG_TIMESTAMP /* display image timestamps */
-
-#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) /* Boot low */
-# define CONFIG_SYS_LOWBOOT 1
-#endif
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
- "bootfile=/tftpboot/tqm5200/uImage\0" \
- "load=tftp 200000 ${u-boot}\0" \
- "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
- "update=protect off FC000000 FC05FFFF;" \
- "erase FC000000 FC05FFFF;" \
- "cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC05FFFF\0" \
- ""
-
-#define CONFIG_BOOTCOMMAND "run net_nfs"
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-
-#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
-/*
- * PCI Bus clocking configuration
- *
- * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
- * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
- */
-#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
-#endif
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#ifdef CONFIG_TQM5200_REV100
-#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
-#else
-#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
-#endif
-
-/*
- * I2C clock frequency
- *
- * Please notice, that the resulting clock frequency could differ from the
- * configured value. This is because the I2C clock is derived from system
- * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
- * approximation allways lies below the configured value, never above.
- */
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
- * also). For other EEPROMs configuration should be verified. On Mini-FAP the
- * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
- * same configuration could be used.
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-
-/*
- * HW-Monitor configuration on Mini-FAP
- */
-#if defined (CONFIG_MINIFAP)
-#define CONFIG_SYS_I2C_HWMON_ADDR 0x2C
-#endif
-
-/* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_MINIFAP)
-#undef CONFIG_SYS_POST_I2C_ADDRS
-#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
- CONFIG_SYS_I2C_HWMON_ADDR, \
- CONFIG_SYS_I2C_SLAVE}
-#endif
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE /* 0xFC000000 */
-
-/* use CFI flash driver if no module variant is spezified */
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START }
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
-#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
-
-#if !defined(CONFIG_SYS_LOWBOOT)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
-#else /* CONFIG_SYS_LOWBOOT */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
-#endif /* CONFIG_SYS_LOWBOOT */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks
- (= chip selects) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x10000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR 0xF0000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-
-/* Use ON-Chip SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE
-#else
-#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
-#endif
-
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC 1
-/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
- */
-/* #define CONFIG_FEC_10MBIT 1 */
-#define CONFIG_PHY_ADDR 0x00
-
-/*
- * GPIO configuration
- *
- * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
- * Bit 0 (mask: 0x80000000): 1
- * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
- * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
- * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- * Use for REV200 STK52XX boards. Do not use with REV100 modules
- * (because, there I2C1 is used as I2C bus)
- * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
- * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
- * 000 -> All PSC2 pins are GIOPs
- * 001 -> CAN1/2 on PSC2 pins
- * Use for REV100 STK52xx boards
- * use PSC6:
- * on STK52xx:
- * use as UART. Pins PSC6_0 to PSC6_3 are used.
- * Bits 9:11 (mask: 0x00700000):
- * 101 -> PSC6 : Extended POST test is not available
- * on MINI-FAP and TQM5200_IB:
- * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
- * 000 -> PSC6 could not be used as UART, CODEC or IrDA
- * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
- * tests.
- */
-#if defined (CONFIG_MINIFAP)
-# define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004
-#elif defined (CONFIG_STK52XX)
-# if defined (CONFIG_STK52XX_REV100)
-# define CONFIG_SYS_GPS_PORT_CONFIG 0x81500014
-# else /* STK52xx REV200 and above */
-# if defined (CONFIG_TQM5200_REV100)
-# error TQM5200 REV100 not supported on STK52XX REV200 or above
-# else/* TQM5200 REV200 and above */
-# define CONFIG_SYS_GPS_PORT_CONFIG 0x91500004
-# endif
-# endif
-#else /* TMQ5200 Inbetriebnahme-Board */
-# define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004
-#endif
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-/* Enable an alternate, more extensive memory test */
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
-#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
-#define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
-#else
-#define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
-#endif
-#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
-
-#define CONFIG_LAST_STAGE_INIT
-
-/*
- * SRAM - Do not map below 2 GB in address space, because this area is used
- * for SDRAM autosizing.
- */
-#define CONFIG_SYS_CS2_START 0xE5000000
-#define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */
-#define CONFIG_SYS_CS2_CFG 0x0004D930
-
-/*
- * Grafic controller - Do not map below 2 GB in address space, because this
- * area is used for SDRAM autosizing.
- */
-#define SM501_FB_BASE 0xE0000000
-#define CONFIG_SYS_CS1_START (SM501_FB_BASE)
-#define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */
-#define CONFIG_SYS_CS1_CFG 0x8F48FF70
-#define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000
-
-#define CONFIG_SYS_CS_BURST 0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xff000000
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00001000
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff Supports IDE harddisk
- *-----------------------------------------------------------------------
- */
-
-#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-
-#define CONFIG_IDE_RESET /* reset for ide supported */
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
-
-/* Interval between registers */
-#define CONFIG_SYS_ATA_STRIDE 4
-
-#endif /* __CONFIG_H */
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_CONSOLE
#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */
#define CONFIG_SPL_LIBCOMMON_SUPPORT
56, 57, 58, 59, 60, 61, 62, 63}
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
-#define CONFIG_NAND_OMAP_BCH8
#define CONFIG_BCH
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+#define CONFIG_SYS_NAND_MAX_ECCPOS 56
/* commands to include */
#include <config_cmd_default.h>
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 13
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CSOR_NAND_PGS_512 0x00000000
#define CSOR_NAND_PGS_2K 0x00080000
#define CSOR_NAND_PGS_4K 0x00100000
+#define CSOR_NAND_PGS_8K 0x00180000
/* Spare region Size */
#define CSOR_NAND_SPRZ_MASK 0x0000E000
#define CSOR_NAND_SPRZ_SHIFT 13
#define CSOR_NAND_SPRZ_210 0x00006000
#define CSOR_NAND_SPRZ_218 0x00008000
#define CSOR_NAND_SPRZ_224 0x0000A000
+#define CSOR_NAND_SPRZ_CSOR_EXT 0x0000C000
/* Pages Per Block */
#define CSOR_NAND_PB_MASK 0x00000700
#define CSOR_NAND_PB_SHIFT 8
/*
- * Copyright 2009-2012 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012, 2013 Freescale Semiconductor, Inc.
* Jun-jie Zhang <b18070@freescale.com>
* Mingkai Hu <Mingkai.hu@freescale.com>
*
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
-void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr,
int dev_addr, int reg, int value);
-int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr,
int dev_addr, int regnum);
int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
int regnum);
struct fsl_pq_mdio_info {
- struct tsec_mii_mng *regs;
+ struct tsec_mii_mng __iomem *regs;
char *name;
};
int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info);
uint8_t *oobbuf;
};
+#ifdef CONFIG_SYS_NAND_MAX_OOBFREE
+#define MTD_MAX_OOBFREE_ENTRIES_LARGE CONFIG_SYS_NAND_MAX_OOBFREE
+#else
+#define MTD_MAX_OOBFREE_ENTRIES_LARGE 32
+#endif
+
+#ifdef CONFIG_SYS_NAND_MAX_ECCPOS
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE CONFIG_SYS_NAND_MAX_ECCPOS
+#else
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE 640
+#endif
+
+/*
+ * ECC layout control structure. Exported to userspace for
+ * diagnosis and to allow creation of raw images
+ */
+struct nand_ecclayout {
+ uint32_t eccbytes;
+ uint32_t eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
+ uint32_t oobavail;
+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
+};
+
struct mtd_info {
u_char type;
u_int32_t flags;
#define MII_KSZ9031_MOD_DATA_POST_INC_RW 0x8000
#define MII_KSZ9031_MOD_DATA_POST_INC_W 0xC000
+#define MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW 0x4
+#define MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW 0x5
+#define MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW 0x6
+#define MII_KSZ9031_EXT_RGMII_CLOCK_SKEW 0x8
+
struct phy_device;
int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val);
int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum);
uint32_t length;
};
-#define MTD_MAX_OOBFREE_ENTRIES 8
-/*
- * ECC layout control structure. Exported to userspace for
- * diagnosis and to allow creation of raw images
- */
-struct nand_ecclayout {
- uint32_t eccbytes;
- uint32_t eccpos[128];
- uint32_t oobavail;
- struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
-};
-
/**
* struct mtd_ecc_stats - error correction stats
*
int (*recv) (struct eth_device *);
void (*halt) (struct eth_device *);
#ifdef CONFIG_MCAST_TFTP
- int (*mcast) (struct eth_device *, u32 ip, u8 set);
+ int (*mcast) (struct eth_device *, const u8 *enetaddr, u8 set);
#endif
int (*write_hwaddr) (struct eth_device *);
struct eth_device *next;
#ifndef __OS_H__
#define __OS_H__
+#include <linux/types.h>
+
struct sandbox_state;
/**
*
* \return A monotonic increasing time scaled in nano seconds
*/
-u64 os_get_nsec(void);
+uint64_t os_get_nsec(void);
/**
* Parse arguments and update sandbox state.
/* Called when bringing down the controller */
int (*shutdown)(struct phy_device *phydev);
+ int (*readext)(struct phy_device *phydev, int addr, int devad, int reg);
+ int (*writeext)(struct phy_device *phydev, int addr, int devad, int reg,
+ u16 val);
struct list_head list;
};
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004, 2007, 2009, 2011 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009, 2011, 2013 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* maintained by Xianghua Xiao (x.xiao@motorola.com)
* author Andy Fleming
#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520)
+#define TSEC_GET_REGS(num, offset) \
+ (struct tsec __iomem *)\
+ (TSEC_BASE_ADDR + (((num) - 1) * (offset)))
+
+#define TSEC_GET_REGS_BASE(num) \
+ TSEC_GET_REGS((num), TSEC_SIZE)
+
+#define TSEC_GET_MDIO_REGS(num, offset) \
+ (struct tsec_mii_mng __iomem *)\
+ (CONFIG_SYS_MDIO_BASE_ADDR + ((num) - 1) * (offset))
+
+#define TSEC_GET_MDIO_REGS_BASE(num) \
+ TSEC_GET_MDIO_REGS((num), TSEC_MDIO_OFFSET)
+
#define DEFAULT_MII_NAME "FSL_MDIO"
#define STD_TSEC_INFO(num) \
{ \
- .regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
- .miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
- + (num - 1) * TSEC_MDIO_OFFSET), \
+ .regs = TSEC_GET_REGS_BASE(num), \
+ .miiregs_sgmii = TSEC_GET_MDIO_REGS_BASE(num), \
.devname = CONFIG_TSEC##num##_NAME, \
.phyaddr = TSEC##num##_PHY_ADDR, \
.flags = TSEC##num##_FLAGS, \
#define SET_STD_TSEC_INFO(x, num) \
{ \
- x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
- x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
- + (num - 1) * TSEC_MDIO_OFFSET); \
+ x.regs = TSEC_GET_REGS_BASE(num); \
+ x.miiregs_sgmii = TSEC_GET_MDIO_REGS_BASE(num); \
x.devname = CONFIG_TSEC##num##_NAME; \
x.phyaddr = TSEC##num##_PHY_ADDR; \
x.flags = TSEC##num##_FLAGS;\
#define RXBD_TRUNCATED 0x0001
#define RXBD_STATS 0x003f
-typedef struct txbd8
-{
- ushort status; /* Status Fields */
- ushort length; /* Buffer length */
- uint bufPtr; /* Buffer Pointer */
-} txbd8_t;
-
-typedef struct rxbd8
-{
- ushort status; /* Status Fields */
- ushort length; /* Buffer Length */
- uint bufPtr; /* Buffer Pointer */
-} rxbd8_t;
-
-typedef struct rmon_mib
-{
+struct txbd8 {
+ uint16_t status; /* Status Fields */
+ uint16_t length; /* Buffer length */
+ uint32_t bufptr; /* Buffer Pointer */
+};
+
+struct rxbd8 {
+ uint16_t status; /* Status Fields */
+ uint16_t length; /* Buffer Length */
+ uint32_t bufptr; /* Buffer Pointer */
+};
+
+struct tsec_rmon_mib {
/* Transmit and Receive Counters */
- uint tr64; /* Transmit and Receive 64-byte Frame Counter */
- uint tr127; /* Transmit and Receive 65-127 byte Frame Counter */
- uint tr255; /* Transmit and Receive 128-255 byte Frame Counter */
- uint tr511; /* Transmit and Receive 256-511 byte Frame Counter */
- uint tr1k; /* Transmit and Receive 512-1023 byte Frame Counter */
- uint trmax; /* Transmit and Receive 1024-1518 byte Frame Counter */
- uint trmgv; /* Transmit and Receive 1519-1522 byte Good VLAN Frame */
+ u32 tr64; /* Tx/Rx 64-byte Frame Counter */
+ u32 tr127; /* Tx/Rx 65-127 byte Frame Counter */
+ u32 tr255; /* Tx/Rx 128-255 byte Frame Counter */
+ u32 tr511; /* Tx/Rx 256-511 byte Frame Counter */
+ u32 tr1k; /* Tx/Rx 512-1023 byte Frame Counter */
+ u32 trmax; /* Tx/Rx 1024-1518 byte Frame Counter */
+ u32 trmgv; /* Tx/Rx 1519-1522 byte Good VLAN Frame */
/* Receive Counters */
- uint rbyt; /* Receive Byte Counter */
- uint rpkt; /* Receive Packet Counter */
- uint rfcs; /* Receive FCS Error Counter */
- uint rmca; /* Receive Multicast Packet (Counter) */
- uint rbca; /* Receive Broadcast Packet */
- uint rxcf; /* Receive Control Frame Packet */
- uint rxpf; /* Receive Pause Frame Packet */
- uint rxuo; /* Receive Unknown OP Code */
- uint raln; /* Receive Alignment Error */
- uint rflr; /* Receive Frame Length Error */
- uint rcde; /* Receive Code Error */
- uint rcse; /* Receive Carrier Sense Error */
- uint rund; /* Receive Undersize Packet */
- uint rovr; /* Receive Oversize Packet */
- uint rfrg; /* Receive Fragments */
- uint rjbr; /* Receive Jabber */
- uint rdrp; /* Receive Drop */
+ u32 rbyt; /* Receive Byte Counter */
+ u32 rpkt; /* Receive Packet Counter */
+ u32 rfcs; /* Receive FCS Error Counter */
+ u32 rmca; /* Receive Multicast Packet (Counter) */
+ u32 rbca; /* Receive Broadcast Packet */
+ u32 rxcf; /* Receive Control Frame Packet */
+ u32 rxpf; /* Receive Pause Frame Packet */
+ u32 rxuo; /* Receive Unknown OP Code */
+ u32 raln; /* Receive Alignment Error */
+ u32 rflr; /* Receive Frame Length Error */
+ u32 rcde; /* Receive Code Error */
+ u32 rcse; /* Receive Carrier Sense Error */
+ u32 rund; /* Receive Undersize Packet */
+ u32 rovr; /* Receive Oversize Packet */
+ u32 rfrg; /* Receive Fragments */
+ u32 rjbr; /* Receive Jabber */
+ u32 rdrp; /* Receive Drop */
/* Transmit Counters */
- uint tbyt; /* Transmit Byte Counter */
- uint tpkt; /* Transmit Packet */
- uint tmca; /* Transmit Multicast Packet */
- uint tbca; /* Transmit Broadcast Packet */
- uint txpf; /* Transmit Pause Control Frame */
- uint tdfr; /* Transmit Deferral Packet */
- uint tedf; /* Transmit Excessive Deferral Packet */
- uint tscl; /* Transmit Single Collision Packet */
+ u32 tbyt; /* Transmit Byte Counter */
+ u32 tpkt; /* Transmit Packet */
+ u32 tmca; /* Transmit Multicast Packet */
+ u32 tbca; /* Transmit Broadcast Packet */
+ u32 txpf; /* Transmit Pause Control Frame */
+ u32 tdfr; /* Transmit Deferral Packet */
+ u32 tedf; /* Transmit Excessive Deferral Packet */
+ u32 tscl; /* Transmit Single Collision Packet */
/* (0x2_n700) */
- uint tmcl; /* Transmit Multiple Collision Packet */
- uint tlcl; /* Transmit Late Collision Packet */
- uint txcl; /* Transmit Excessive Collision Packet */
- uint tncl; /* Transmit Total Collision */
-
- uint res2;
-
- uint tdrp; /* Transmit Drop Frame */
- uint tjbr; /* Transmit Jabber Frame */
- uint tfcs; /* Transmit FCS Error */
- uint txcf; /* Transmit Control Frame */
- uint tovr; /* Transmit Oversize Frame */
- uint tund; /* Transmit Undersize Frame */
- uint tfrg; /* Transmit Fragments Frame */
+ u32 tmcl; /* Transmit Multiple Collision Packet */
+ u32 tlcl; /* Transmit Late Collision Packet */
+ u32 txcl; /* Transmit Excessive Collision Packet */
+ u32 tncl; /* Transmit Total Collision */
+
+ u32 res2;
+
+ u32 tdrp; /* Transmit Drop Frame */
+ u32 tjbr; /* Transmit Jabber Frame */
+ u32 tfcs; /* Transmit FCS Error */
+ u32 txcf; /* Transmit Control Frame */
+ u32 tovr; /* Transmit Oversize Frame */
+ u32 tund; /* Transmit Undersize Frame */
+ u32 tfrg; /* Transmit Fragments Frame */
/* General Registers */
- uint car1; /* Carry Register One */
- uint car2; /* Carry Register Two */
- uint cam1; /* Carry Register One Mask */
- uint cam2; /* Carry Register Two Mask */
-} rmon_mib_t;
-
-typedef struct tsec_hash_regs
-{
- uint iaddr0; /* Individual Address Register 0 */
- uint iaddr1; /* Individual Address Register 1 */
- uint iaddr2; /* Individual Address Register 2 */
- uint iaddr3; /* Individual Address Register 3 */
- uint iaddr4; /* Individual Address Register 4 */
- uint iaddr5; /* Individual Address Register 5 */
- uint iaddr6; /* Individual Address Register 6 */
- uint iaddr7; /* Individual Address Register 7 */
- uint res1[24];
- uint gaddr0; /* Group Address Register 0 */
- uint gaddr1; /* Group Address Register 1 */
- uint gaddr2; /* Group Address Register 2 */
- uint gaddr3; /* Group Address Register 3 */
- uint gaddr4; /* Group Address Register 4 */
- uint gaddr5; /* Group Address Register 5 */
- uint gaddr6; /* Group Address Register 6 */
- uint gaddr7; /* Group Address Register 7 */
- uint res2[24];
-} tsec_hash_t;
-
-typedef struct tsec
-{
+ u32 car1; /* Carry Register One */
+ u32 car2; /* Carry Register Two */
+ u32 cam1; /* Carry Register One Mask */
+ u32 cam2; /* Carry Register Two Mask */
+};
+
+struct tsec_hash_regs {
+ u32 iaddr0; /* Individual Address Register 0 */
+ u32 iaddr1; /* Individual Address Register 1 */
+ u32 iaddr2; /* Individual Address Register 2 */
+ u32 iaddr3; /* Individual Address Register 3 */
+ u32 iaddr4; /* Individual Address Register 4 */
+ u32 iaddr5; /* Individual Address Register 5 */
+ u32 iaddr6; /* Individual Address Register 6 */
+ u32 iaddr7; /* Individual Address Register 7 */
+ u32 res1[24];
+ u32 gaddr0; /* Group Address Register 0 */
+ u32 gaddr1; /* Group Address Register 1 */
+ u32 gaddr2; /* Group Address Register 2 */
+ u32 gaddr3; /* Group Address Register 3 */
+ u32 gaddr4; /* Group Address Register 4 */
+ u32 gaddr5; /* Group Address Register 5 */
+ u32 gaddr6; /* Group Address Register 6 */
+ u32 gaddr7; /* Group Address Register 7 */
+ u32 res2[24];
+};
+
+struct tsec {
/* General Control and Status Registers (0x2_n000) */
- uint res000[4];
+ u32 res000[4];
- uint ievent; /* Interrupt Event */
- uint imask; /* Interrupt Mask */
- uint edis; /* Error Disabled */
- uint res01c;
- uint ecntrl; /* Ethernet Control */
- uint minflr; /* Minimum Frame Length */
- uint ptv; /* Pause Time Value */
- uint dmactrl; /* DMA Control */
- uint tbipa; /* TBI PHY Address */
+ u32 ievent; /* Interrupt Event */
+ u32 imask; /* Interrupt Mask */
+ u32 edis; /* Error Disabled */
+ u32 res01c;
+ u32 ecntrl; /* Ethernet Control */
+ u32 minflr; /* Minimum Frame Length */
+ u32 ptv; /* Pause Time Value */
+ u32 dmactrl; /* DMA Control */
+ u32 tbipa; /* TBI PHY Address */
- uint res034[3];
- uint res040[48];
+ u32 res034[3];
+ u32 res040[48];
/* Transmit Control and Status Registers (0x2_n100) */
- uint tctrl; /* Transmit Control */
- uint tstat; /* Transmit Status */
- uint res108;
- uint tbdlen; /* Tx BD Data Length */
- uint res110[5];
- uint ctbptr; /* Current TxBD Pointer */
- uint res128[23];
- uint tbptr; /* TxBD Pointer */
- uint res188[30];
+ u32 tctrl; /* Transmit Control */
+ u32 tstat; /* Transmit Status */
+ u32 res108;
+ u32 tbdlen; /* Tx BD Data Length */
+ u32 res110[5];
+ u32 ctbptr; /* Current TxBD Pointer */
+ u32 res128[23];
+ u32 tbptr; /* TxBD Pointer */
+ u32 res188[30];
/* (0x2_n200) */
- uint res200;
- uint tbase; /* TxBD Base Address */
- uint res208[42];
- uint ostbd; /* Out of Sequence TxBD */
- uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */
- uint res2b8[18];
+ u32 res200;
+ u32 tbase; /* TxBD Base Address */
+ u32 res208[42];
+ u32 ostbd; /* Out of Sequence TxBD */
+ u32 ostbdp; /* Out of Sequence Tx Data Buffer Pointer */
+ u32 res2b8[18];
/* Receive Control and Status Registers (0x2_n300) */
- uint rctrl; /* Receive Control */
- uint rstat; /* Receive Status */
- uint res308;
- uint rbdlen; /* RxBD Data Length */
- uint res310[4];
- uint res320;
- uint crbptr; /* Current Receive Buffer Pointer */
- uint res328[6];
- uint mrblr; /* Maximum Receive Buffer Length */
- uint res344[16];
- uint rbptr; /* RxBD Pointer */
- uint res388[30];
+ u32 rctrl; /* Receive Control */
+ u32 rstat; /* Receive Status */
+ u32 res308;
+ u32 rbdlen; /* RxBD Data Length */
+ u32 res310[4];
+ u32 res320;
+ u32 crbptr; /* Current Receive Buffer Pointer */
+ u32 res328[6];
+ u32 mrblr; /* Maximum Receive Buffer Length */
+ u32 res344[16];
+ u32 rbptr; /* RxBD Pointer */
+ u32 res388[30];
/* (0x2_n400) */
- uint res400;
- uint rbase; /* RxBD Base Address */
- uint res408[62];
+ u32 res400;
+ u32 rbase; /* RxBD Base Address */
+ u32 res408[62];
/* MAC Registers (0x2_n500) */
- uint maccfg1; /* MAC Configuration #1 */
- uint maccfg2; /* MAC Configuration #2 */
- uint ipgifg; /* Inter Packet Gap/Inter Frame Gap */
- uint hafdup; /* Half-duplex */
- uint maxfrm; /* Maximum Frame */
- uint res514;
- uint res518;
+ u32 maccfg1; /* MAC Configuration #1 */
+ u32 maccfg2; /* MAC Configuration #2 */
+ u32 ipgifg; /* Inter Packet Gap/Inter Frame Gap */
+ u32 hafdup; /* Half-duplex */
+ u32 maxfrm; /* Maximum Frame */
+ u32 res514;
+ u32 res518;
- uint res51c;
+ u32 res51c;
- uint resmdio[6];
+ u32 resmdio[6];
- uint res538;
+ u32 res538;
- uint ifstat; /* Interface Status */
- uint macstnaddr1; /* Station Address, part 1 */
- uint macstnaddr2; /* Station Address, part 2 */
- uint res548[46];
+ u32 ifstat; /* Interface Status */
+ u32 macstnaddr1; /* Station Address, part 1 */
+ u32 macstnaddr2; /* Station Address, part 2 */
+ u32 res548[46];
/* (0x2_n600) */
- uint res600[32];
+ u32 res600[32];
/* RMON MIB Registers (0x2_n680-0x2_n73c) */
- rmon_mib_t rmon;
- uint res740[48];
+ struct tsec_rmon_mib rmon;
+ u32 res740[48];
/* Hash Function Registers (0x2_n800) */
- tsec_hash_t hash;
+ struct tsec_hash_regs hash;
- uint res900[128];
+ u32 res900[128];
/* Pattern Registers (0x2_nb00) */
- uint resb00[62];
- uint attr; /* Default Attribute Register */
- uint attreli; /* Default Attribute Extract Length and Index */
+ u32 resb00[62];
+ u32 attr; /* Default Attribute Register */
+ u32 attreli; /* Default Attribute Extract Length and Index */
/* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */
- uint resc00[256];
-} tsec_t;
+ u32 resc00[256];
+};
#define TSEC_GIGABIT (1 << 0)
#define TSEC_SGMII (1 << 2) /* MAC-PHY interface uses SGMII */
struct tsec_private {
- tsec_t *regs;
- struct tsec_mii_mng *phyregs_sgmii;
+ struct tsec __iomem *regs;
+ struct tsec_mii_mng __iomem *phyregs_sgmii;
struct phy_device *phydev;
phy_interface_t interface;
struct mii_dev *bus;
};
struct tsec_info_struct {
- tsec_t *regs;
- struct tsec_mii_mng *miiregs_sgmii;
+ struct tsec __iomem *regs;
+ struct tsec_mii_mng __iomem *miiregs_sgmii;
char *devname;
char *mii_devname;
phy_interface_t interface;
#
ifndef CONFIG_SPL_BUILD
+
+obj-$(CONFIG_RSA) += rsa/
+obj-$(CONFIG_LZMA) += lzma/
+obj-$(CONFIG_LZO) += lzo/
+obj-$(CONFIG_ZLIB) += zlib/
+obj-$(CONFIG_TIZEN) += tizen/
+
obj-$(CONFIG_AES) += aes.o
obj-$(CONFIG_BZIP2) += bzlib.o
obj-$(CONFIG_BZIP2) += bzlib_crctable.o
size = (fdt_size_t *)((char *)cell +
sizeof(fdt_addr_t));
*sizep = fdt_size_to_cpu(*size);
- debug("addr=%p, size=%p\n", (void *)addr,
- (void *)*sizep);
+ debug("addr=%08lx, size=%08x\n",
+ (ulong)addr, *sizep);
} else {
- debug("%p\n", (void *)addr);
+ debug("%08lx\n", (ulong)addr);
}
return addr;
}
if (!cell || (len != sizeof(fdt_addr_t) * 2))
return -1;
- *ptrp = (void *)fdt_addr_to_cpu(*cell);
+ *ptrp = map_sysmem(fdt_addr_to_cpu(*cell), *size);
*size = fdt_size_to_cpu(cell[1]);
debug("%s: size=%zx\n", __func__, *size);
return 0;
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin \
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin \
$(nandobj)System.map
-all: $(obj).depend $(ALL)
-
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)System.map: $(nandobj)u-boot-spl
@$(NM) $< | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
- sort > $(nandobj)System.map
+ sort > $@
$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
# from cpu directory
$(obj)cache.S:
- @rm -f $(obj)cache.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $(obj)cache.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $@
$(obj)gpio.c:
- @rm -f $(obj)gpio.c
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/gpio.c $(obj)gpio.c
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/gpio.c $@
$(obj)ndfc.c:
- @rm -f $(obj)ndfc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@
$(obj)start.S:
- @rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@
# from board directory
$(obj)memory.c:
- @rm -f $(obj)memory.c
- ln -s $(SRCTREE)/board/amcc/acadia/memory.c $(obj)memory.c
+ @rm -f $@
+ ln -s $(SRCTREE)/board/amcc/acadia/memory.c $@
$(obj)pll.c:
- @rm -f $(obj)pll.c
- ln -s $(SRCTREE)/board/amcc/acadia/pll.c $(obj)pll.c
+ @rm -f $@
+ ln -s $(SRCTREE)/board/amcc/acadia/pll.c $@
# from nand_spl directory
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/nand_boot.c $@
# from drivers/mtd/nand directory
$(obj)nand_ecc.c:
- @rm -f $(obj)nand_ecc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
# from cpu directory
$(obj)ndfc.c:
- @rm -f $(obj)ndfc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@
$(obj)start.S:
- @rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@
# from board directory
$(obj)init.S:
- @rm -f $(obj)init.S
- ln -s $(SRCTREE)/board/amcc/bamboo/init.S $(obj)init.S
+ @rm -f $@
+ ln -s $(SRCTREE)/board/amcc/bamboo/init.S $@
# from nand_spl directory
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/nand_boot.c $@
# from drivers/mtd/nand directory
$(obj)nand_ecc.c:
- @rm -f $(obj)nand_ecc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@
ifneq ($(OBJTREE), $(SRCTREE))
$(obj)sdram.c:
- @rm -f $(obj)sdram.c
- ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/sdram.c $(obj)sdram.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/sdram.c $@
endif
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
# from cpu directory
$(obj)ndfc.c:
- @rm -f $(obj)ndfc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@
$(obj)start.S:
- @rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@
# from board directory
$(obj)init.S:
- @rm -f $(obj)init.S
- ln -s $(SRCTREE)/board/amcc/canyonlands/init.S $(obj)init.S
+ @rm -f $@
+ ln -s $(SRCTREE)/board/amcc/canyonlands/init.S $@
# from nand_spl directory
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/nand_boot.c $@
# from drivers/mtd/nand directory
$(obj)nand_ecc.c:
- @rm -f $(obj)nand_ecc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@
ifneq ($(OBJTREE), $(SRCTREE))
$(obj)ddr2_fixed.c:
- @rm -f $(obj)ddr2_fixed.c
- ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/ddr2_fixed.c $(obj)ddr2_fixed.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/ddr2_fixed.c $@
endif
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
# from cpu directory
$(obj)44x_spd_ddr2.c: $(obj)ecc.h
- @rm -f $(obj)44x_spd_ddr2.c
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c $@
$(obj)cache.S:
- @rm -f $(obj)cache.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $(obj)cache.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $@
$(obj)ecc.h:
- @rm -f $(obj)ecc.h
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/ecc.h $(obj)ecc.h
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/ecc.h $@
$(obj)ndfc.c:
- @rm -f $(obj)ndfc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@
$(obj)start.S:
- @rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@
# from nand_spl directory
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/nand_boot.c $@
# from drivers/nand directory
$(obj)nand_ecc.c:
- @rm -f $(obj)nand_ecc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
# from cpu directory
$(obj)denali_data_eye.c:
- @rm -f $(obj)denali_data_eye.c
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/denali_data_eye.c $(obj)denali_data_eye.c
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/denali_data_eye.c $@
$(obj)ndfc.c:
- @rm -f $(obj)ndfc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@
$(obj)start.S:
- @rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@
# from board directory
$(obj)init.S:
- @rm -f $(obj)init.S
- ln -s $(SRCTREE)/board/amcc/sequoia/init.S $(obj)init.S
+ @rm -f $@
+ ln -s $(SRCTREE)/board/amcc/sequoia/init.S $@
$(obj)sdram.c:
- @rm -f $(obj)sdram.c
+ @rm -f $@
@rm -f $(obj)sdram.h
- ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $(obj)sdram.c
+ ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $@
ln -s $(SRCTREE)/board/amcc/sequoia/sdram.h $(obj)sdram.h
# from nand_spl directory
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/nand_boot.c $@
# from drivers/mtd/nand directory
$(obj)nand_ecc.c:
- @rm -f $(obj)nand_ecc.c
- ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
+ @rm -f $@
+ ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
# create symbolic links for common files
$(obj)start.S:
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $@
$(obj)nand_boot_fsl_elbc.c:
- ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
- $(obj)nand_boot_fsl_elbc.c
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@
$(obj)sdram.c:
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $(obj)sdram.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $@
$(obj)$(BOARD).c:
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $(obj)$(BOARD).c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $@
$(obj)ns16550.c:
- ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@
$(obj)spl_minimal.c:
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $(obj)spl_minimal.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $@
$(obj)cache.c:
- ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@
$(obj)time.c:
- ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $(obj)time.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $@
$(obj)ticks.S:
- ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
+ ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $@
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
# create symbolic links for common files
$(obj)cache.c:
- @rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@
$(obj)cpu_init_early.c:
- @rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@
$(obj)spl_minimal.c:
- @rm -f $(obj)spl_minimal.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@
$(obj)fsl_law.c:
- @rm -f $(obj)fsl_law.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@
$(obj)law.c:
- @rm -f $(obj)law.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@
$(obj)nand_boot_fsl_elbc.c:
- @rm -f $(obj)nand_boot_fsl_elbc.c
- ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
- $(obj)nand_boot_fsl_elbc.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@
$(obj)ns16550.c:
- @rm -f $(obj)ns16550.c
- ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@
$(obj)fixed_ivor.S:
- @rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $@
$(obj)start.S: $(obj)fixed_ivor.S
- @rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $@
$(obj)tlb.c:
- @rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $@
$(obj)tlb_table.c:
- @rm -f $(obj)tlb_table.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@
ifneq ($(OBJTREE), $(SRCTREE))
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@
endif
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
# create symbolic links for common files
$(obj)cache.c:
- @rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@
$(obj)cpu_init_early.c:
- @rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@
$(obj)spl_minimal.c:
- @rm -f $(obj)spl_minimal.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@
$(obj)fsl_law.c:
- @rm -f $(obj)fsl_law.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@
$(obj)law.c:
- @rm -f $(obj)law.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@
$(obj)nand_boot_fsl_elbc.c:
- @rm -f $(obj)nand_boot_fsl_elbc.c
- ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
- $(obj)nand_boot_fsl_elbc.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@
$(obj)ns16550.c:
- @rm -f $(obj)ns16550.c
- ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@
$(obj)fixed_ivor.S:
- @rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $@
$(obj)start.S: $(obj)fixed_ivor.S
- @rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $@
$(obj)tlb.c:
- @rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $@
$(obj)tlb_table.c:
- @rm -f $(obj)tlb_table.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@
ifneq ($(OBJTREE), $(SRCTREE))
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@
endif
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
# create symbolic links for common files
$(obj)cache.c:
- @rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@
$(obj)cpu_init_early.c:
- @rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@
$(obj)spl_minimal.c:
- @rm -f $(obj)spl_minimal.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@
$(obj)fsl_law.c:
- @rm -f $(obj)fsl_law.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@
$(obj)law.c:
- @rm -f $(obj)law.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@
$(obj)nand_boot_fsl_elbc.c:
- @rm -f $(obj)nand_boot_fsl_elbc.c
- ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
- $(obj)nand_boot_fsl_elbc.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@
$(obj)ns16550.c:
- @rm -f $(obj)ns16550.c
- ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@
$(obj)fixed_ivor.S:
- @rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $@
$(obj)start.S: $(obj)fixed_ivor.S
- @rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $@
$(obj)tlb.c:
- @rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $@
$(obj)tlb_table.c:
- @rm -f $(obj)tlb_table.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@
ifneq ($(OBJTREE), $(SRCTREE))
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@
endif
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
# create symbolic links for common files
$(obj)cache.c:
- @rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@
$(obj)cpu_init_early.c:
- @rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $@
$(obj)spl_minimal.c:
- @rm -f $(obj)spl_minimal.c
- ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $(obj)spl_minimal.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $@
$(obj)fsl_law.c:
- @rm -f $(obj)fsl_law.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@
$(obj)law.c:
- @rm -f $(obj)law.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@
$(obj)nand_boot_fsl_elbc.c:
- @rm -f $(obj)nand_boot_fsl_elbc.c
- ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
- $(obj)nand_boot_fsl_elbc.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@
$(obj)ns16550.c:
- @rm -f $(obj)ns16550.c
- ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@
$(obj)fixed_ivor.S:
- @rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $(obj)fixed_ivor.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $@
$(obj)start.S: $(obj)fixed_ivor.S
- @rm -f $(obj)start.S
- ln -sf $(SRCTREE)/$(CPUDIR)/start.S $(obj)start.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/$(CPUDIR)/start.S $@
$(obj)tlb.c:
- @rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $(obj)tlb.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $@
$(obj)tlb_table.c:
- @rm -f $(obj)tlb_table.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@
ifneq ($(OBJTREE), $(SRCTREE))
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@
endif
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
# create symbolic links for common files
$(obj)cache.c:
- @rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@
$(obj)cpu_init_early.c:
- @rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@
$(obj)spl_minimal.c:
- @rm -f $(obj)spl_minimal.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@
$(obj)fsl_law.c:
- @rm -f $(obj)fsl_law.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@
$(obj)law.c:
- @rm -f $(obj)law.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@
$(obj)nand_boot_fsl_elbc.c:
- @rm -f $(obj)nand_boot_fsl_elbc.c
- ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
- $(obj)nand_boot_fsl_elbc.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@
$(obj)ns16550.c:
- @rm -f $(obj)ns16550.c
- ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@
$(obj)resetvec.S:
- @rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
+ @rm -f $@
+ ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@
$(obj)fixed_ivor.S:
- @rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $@
$(obj)start.S: $(obj)fixed_ivor.S
- @rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $@
$(obj)tlb.c:
- @rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $@
$(obj)tlb_table.c:
- @rm -f $(obj)tlb_table.c
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+ @rm -f $@
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@
ifneq ($(OBJTREE), $(SRCTREE))
$(obj)nand_boot.c:
- @rm -f $(obj)nand_boot.c
- ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+ @rm -f $@
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@
endif
#########################################################################
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(nandobj)board/$(BOARDDIR)
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
+all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
+ -Map $(nandobj)u-boot-spl.map -o $@
$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
* number of 0 this means that there was a wrap
* around of the (16 bit) counter.
*/
- if (TftpBlock == 0) {
+ if (TftpBlock == 0 && TftpLastBlock != 0) {
TftpBlockWrap++;
TftpBlockWrapOffset += TftpBlkSize * TFTP_SEQUENCE_SIZE;
TftpTimeoutCount = 0; /* we've done well, reset thhe timeout */
TftpState = STATE_RECV_WRQ;
net_set_udp_handler(TftpHandler);
+
+ /* zero out server ether in case the server ip has changed */
+ memset(NetServerEther, 0, 6);
}
#endif /* CONFIG_CMD_TFTPSRV */
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += sysmon.o
#
# SPDX-License-Identifier: GPL-2.0+
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += codec.o dsp.o
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += coproc_com.o
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += ecc.o
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += cache_8xx.o
obj-$(CONFIG_HAS_POST) += cache.o ether.o spr.o uart.o usb.o watchdog.o
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += cache_4xx.o
obj-$(CONFIG_HAS_POST) += cache.o
obj-$(CONFIG_HAS_POST) += denali_ecc.o
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += flash.o i2c.o memory.o rtc.o
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += asm.o
obj-$(CONFIG_HAS_POST) += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
obj-$(CONFIG_HAS_POST) += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o
# SPDX-License-Identifier: GPL-2.0+
#
-CPPFLAGS += -I$(TOPDIR)
-
obj-$(CONFIG_HAS_POST) += 20001122-1.o
obj-$(CONFIG_HAS_POST) += 20010114-2.o
obj-$(CONFIG_HAS_POST) += 20010226-1.o
plan to use your machine for anything else, you can use -T to increase the
number of threads beyond the default.
-Buildman lets you build all boards, or a subset. Specify the subset using
-the board name, architecture name, SOC name, or anything else in the
-boards.cfg file. So 'at91' will build all AT91 boards (arm), powerpc will
-build all PowerPC boards.
+Buildman lets you build all boards, or a subset. Specify the subset by passing
+command-line arguments that list the desired board name, architecture name,
+SOC name, or anything else in the boards.cfg file. Multiple arguments are
+allowed. Each argument will be interpreted as a regular expression, so
+behaviour is a superset of exact or substring matching. Examples are:
+
+* 'tegra20' All boards with a Tegra20 SoC
+* 'tegra' All boards with any Tegra Soc (Tegra20, Tegra30, Tegra114...)
+* '^tegra[23]0$' All boards with either Tegra20 or Tegra30 SoC
+* 'powerpc' All PowerPC boards
Buildman does not store intermediate object files. It optionally copies
the binary output into a directory when a build is successful. Size
snapper9g45=${at91-boards} BUILD_TAG=443
This will use 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9260
-and 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9g45. A special
+and 'make ENABLE_AT91_TEST=1 BUILD_TAG=443' for snapper9g45. A special
variable ${target} is available to access the target name (snapper9260 and
snapper9g20 in this case). Variables are resolved recursively.
# SPDX-License-Identifier: GPL-2.0+
#
+import re
+
class Board:
"""A particular board that we can build"""
def __init__(self, status, arch, cpu, soc, vendor, board_name, target, options):
due to each argument, arranged by argument.
"""
result = {}
+ argres = {}
for arg in args:
result[arg] = 0
+ argres[arg] = re.compile(arg)
result['all'] = 0
for board in self._boards:
if args:
for arg in args:
- if arg in board.props:
+ argre = argres[arg]
+ match = False
+ for prop in board.props:
+ match = argre.match(prop)
+ if match:
+ break
+ if match:
if not board.build_it:
board.build_it = True
result[arg] += 1
+++ /dev/null
-#
-# (C) Copyright 2009 Marco Stornelli <marco.stornelli@gmail.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-include $(TOPDIR)/config.mk
-
-# Generated executable files
-BIN_FILES-y += imls
-
-# Source files which exist outside the tools/imls directory
-EXT_OBJ_FILES-y += lib/crc32.o
-EXT_OBJ_FILES-y += lib/md5.o
-EXT_OBJ_FILES-y += lib/sha1.o
-EXT_OBJ_FILES-y += common/image.o
-
-# Source files located in the tools/imls directory
-OBJ_FILES-y += imls.o
-
-# Flattened device tree objects
-LIBFDT_OBJ_FILES-y += fdt.o
-LIBFDT_OBJ_FILES-y += fdt_ro.o
-LIBFDT_OBJ_FILES-y += fdt_rw.o
-LIBFDT_OBJ_FILES-y += fdt_strerror.o
-LIBFDT_OBJ_FILES-y += fdt_wip.o
-
-# now $(obj) is defined
-SRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c))
-SRCS += $(addprefix $(SRCTREE)/tools/,$(OBJ_FILES-y:.o=.c))
-SRCS += $(addprefix $(SRCTREE)/lib/libfdt/,$(LIBFDT_OBJ_FILES-y:.o=.c))
-BINS := $(addprefix $(obj),$(sort $(BIN_FILES-y)))
-LIBFDT_OBJS := $(addprefix $(obj),$(LIBFDT_OBJ_FILES-y))
-
-#
-# Compile for a hosted environment on the target
-# Define __KERNEL_STRICT_NAMES to prevent typedef overlaps
-#
-HOSTCPPFLAGS = -idirafter $(SRCTREE)/include \
- -idirafter $(SRCTREE)/arch/$(ARCH)/include \
- -idirafter $(OBJTREE)/include \
- -I $(SRCTREE)/lib/libfdt \
- -I $(SRCTREE)/tools \
- -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES
-
-ifeq ($(MTD_VERSION),old)
-HOSTCPPFLAGS += -DMTD_OLD
-endif
-
-all: $(BINS)
-
-$(obj)imls: $(obj)imls.o $(obj)crc32.o $(obj)image.o $(obj)md5.o \
- $(obj)sha1.o $(LIBFDT_OBJS)
- $(CC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
- $(STRIP) $@
-
-# Some files complain if compiled with -pedantic, use HOSTCFLAGS_NOPED
-$(obj)image.o: $(SRCTREE)/common/image.c
- $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $<
-
-$(obj)imls.o: $(SRCTREE)/tools/imls/imls.c
- $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $<
-
-# Some of the tool objects need to be accessed from outside the tools/imls directory
-$(obj)%.o: $(SRCTREE)/common/%.c
- $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/lib/%.c
- $(CC) -g $(HOSTCFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/lib/libfdt/%.c
- $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $<
-
-clean:
- rm -rf *.o imls
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2009 Marco Stornelli <marco.stornelli@gmail.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-IMLS
--------------
-
-imls is an implementation of a Linux command line tool to access
-to raw flash partitions and list images made with mkimage command.
-
-For building against older versions of the MTD headers (meaning before
-v2.6.8-rc1) it is required to pass the argument "MTD_VERSION=old" to
-make.
-
-Usage examples
---------------
-
-1) Flash with sectors of 128KiB and 32 sectors:
-
-> imls -c 32 -s 131072 /dev/mtd0
-Searching...
-Image Name: foo
-Created: Fri Apr 10 18:11:30 2009
-Image Type: Intel x86 Linux Standalone Program (uncompressed)
-Data Size: 10716 Bytes = 10.46 kB = 0.01 MB
-Load Address: 00000000
-Entry Point: 00000000
-
-2) Flash with sectors of 64KiB and 128 sectors and with a search offset of one
-sector:
-
-> imls -o 1 -c 128 -s 65536 /dev/mtd0
-Searching...
-Image Name: foo
-Created: Fri Apr 10 18:11:30 2009
-Image Type: Intel x86 Linux Standalone Program (uncompressed)
-Data Size: 10716 Bytes = 10.46 kB = 0.01 MB
-Load Address: 00000000
-Entry Point: 00000000
+++ /dev/null
-/*
- * (C) Copyright 2009 Marco Stornelli
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <asm/page.h>
-
-#ifdef MTD_OLD
-#include <stdint.h>
-#include <linux/mtd/mtd.h>
-#else
-#define __user /* nothing */
-#include <mtd/mtd-user.h>
-#endif
-
-#include <sha1.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <image.h>
-
-#define MIN(a, b) (((a) < (b)) ? (a) : (b))
-
-extern unsigned long crc32(unsigned long crc, const char *buf, unsigned int len);
-static void usage(void);
-static int image_verify_header(char *ptr, int fd);
-static int flash_bad_block(int fd, uint8_t mtd_type, loff_t start);
-
-char *cmdname;
-char *devicefile;
-
-unsigned int sectorcount = 0;
-int sflag = 0;
-unsigned int sectoroffset = 0;
-unsigned int sectorsize = 0;
-int cflag = 0;
-
-int main (int argc, char **argv)
-{
- int fd = -1, err = 0, readbyte = 0, j;
- struct mtd_info_user mtdinfo;
- char buf[sizeof(image_header_t)];
- int found = 0;
-
- cmdname = *argv;
-
- while (--argc > 0 && **++argv == '-') {
- while (*++*argv) {
- switch (**argv) {
- case 'c':
- if (--argc <= 0)
- usage ();
- sectorcount = (unsigned int)atoi(*++argv);
- cflag = 1;
- goto NXTARG;
- case 'o':
- if (--argc <= 0)
- usage ();
- sectoroffset = (unsigned int)atoi(*++argv);
- goto NXTARG;
-
- case 's':
- if (--argc <= 0)
- usage ();
- sectorsize = (unsigned int)atoi(*++argv);
- sflag = 1;
- goto NXTARG;
- default:
- usage ();
- }
- }
-NXTARG: ;
- }
-
- if (argc != 1 || cflag == 0 || sflag == 0)
- usage();
-
- devicefile = *argv;
-
- fd = open(devicefile, O_RDONLY);
- if (fd < 0) {
- fprintf (stderr, "%s: Can't open %s: %s\n",
- cmdname, devicefile, strerror(errno));
- exit(EXIT_FAILURE);
- }
-
- err = ioctl(fd, MEMGETINFO, &mtdinfo);
- if (err < 0) {
- fprintf(stderr, "%s: Cannot get MTD information: %s\n",cmdname,
- strerror(errno));
- exit(EXIT_FAILURE);
- }
-
- if (mtdinfo.type != MTD_NORFLASH && mtdinfo.type != MTD_NANDFLASH) {
- fprintf(stderr, "%s: Unsupported flash type %u\n",
- cmdname, mtdinfo.type);
- exit(EXIT_FAILURE);
- }
-
- if (sectorsize * sectorcount != mtdinfo.size) {
- fprintf(stderr, "%s: Partition size (%d) incompatible with "
- "sector size and count\n", cmdname, mtdinfo.size);
- exit(EXIT_FAILURE);
- }
-
- if (sectorsize * sectoroffset >= mtdinfo.size) {
- fprintf(stderr, "%s: Partition size (%d) incompatible with "
- "sector offset given\n", cmdname, mtdinfo.size);
- exit(EXIT_FAILURE);
- }
-
- if (sectoroffset > sectorcount - 1) {
- fprintf(stderr, "%s: Sector offset cannot be grater than "
- "sector count minus one\n", cmdname);
- exit(EXIT_FAILURE);
- }
-
- printf("Searching....\n");
-
- for (j = sectoroffset; j < sectorcount; ++j) {
-
- if (lseek(fd, j*sectorsize, SEEK_SET) != j*sectorsize) {
- fprintf(stderr, "%s: lseek failure: %s\n",
- cmdname, strerror(errno));
- exit(EXIT_FAILURE);
- }
-
- err = flash_bad_block(fd, mtdinfo.type, j*sectorsize);
- if (err < 0)
- exit(EXIT_FAILURE);
- if (err)
- continue; /* Skip and jump to next */
-
- readbyte = read(fd, buf, sizeof(image_header_t));
- if (readbyte != sizeof(image_header_t)) {
- fprintf(stderr, "%s: Can't read from device: %s\n",
- cmdname, strerror(errno));
- exit(EXIT_FAILURE);
- }
-
- if (fdt_check_header(buf)) {
- /* old-style image */
- if (image_verify_header(buf, fd)) {
- found = 1;
- image_print_contents((image_header_t *)buf);
- }
- } else {
- /* FIT image */
- fit_print_contents(buf);
- }
-
- }
-
- close(fd);
-
- if(!found)
- printf("No images found\n");
-
- exit(EXIT_SUCCESS);
-}
-
-void usage()
-{
- fprintf (stderr, "Usage:\n"
- " %s [-o offset] -s size -c count device\n"
- " -o ==> number of sectors to use as offset\n"
- " -c ==> number of sectors\n"
- " -s ==> size of sectors (byte)\n",
- cmdname);
-
- exit(EXIT_FAILURE);
-}
-
-static int image_verify_header(char *ptr, int fd)
-{
- int len, nread;
- char *data;
- uint32_t checksum;
- image_header_t *hdr = (image_header_t *)ptr;
- char buf[PAGE_SIZE];
-
- if (image_get_magic(hdr) != IH_MAGIC)
- return 0;
-
- data = (char *)hdr;
- len = image_get_header_size();
-
- checksum = image_get_hcrc(hdr);
- hdr->ih_hcrc = htonl(0); /* clear for re-calculation */
-
- if (crc32(0, data, len) != checksum) {
- fprintf(stderr,
- "%s: Maybe image found but it has bad header checksum!\n",
- cmdname);
- return 0;
- }
-
- len = image_get_size(hdr);
- checksum = 0;
-
- while (len > 0) {
- nread = read(fd, buf, MIN(len,PAGE_SIZE));
- if (nread != MIN(len,PAGE_SIZE)) {
- fprintf(stderr,
- "%s: Error while reading: %s\n",
- cmdname, strerror(errno));
- exit(EXIT_FAILURE);
- }
- checksum = crc32(checksum, buf, nread);
- len -= nread;
- }
-
- if (checksum != image_get_dcrc(hdr)) {
- fprintf (stderr,
- "%s: Maybe image found but it has corrupted data!\n",
- cmdname);
- return 0;
- }
-
- return 1;
-}
-
-/*
- * Test for bad block on NAND, just returns 0 on NOR, on NAND:
- * 0 - block is good
- * > 0 - block is bad
- * < 0 - failed to test
- */
-static int flash_bad_block(int fd, uint8_t mtd_type, loff_t start)
-{
- if (mtd_type == MTD_NANDFLASH) {
- int badblock = ioctl(fd, MEMGETBADBLOCK, &start);
-
- if (badblock < 0) {
- fprintf(stderr,"%s: Cannot read bad block mark: %s\n",
- cmdname, strerror(errno));
- return badblock;
- }
-
- if (badblock) {
- return badblock;
- }
- }
-
- return 0;
-}
together and put after the cover letter. Can appear multiple
times.
+Commit-notes:
+blah blah
+blah blah
+more blah blah
+END
+ Similar, but for a single commit (patch). These notes will appear
+ immediately below the --- cut in the patch file.
+
Signed-off-by: Their Name <email>
A sign-off is added automatically to your patches (this is
probably a bug). If you put this tag in your patches, it will
Change-Id:
Review URL:
Reviewed-on:
-
+Commit-xxxx: (except Commit-notes)
Exercise for the reader: Try adding some tags to one of your current
patch series and see how the patches turn out.
changes: Dict containing a list of changes (single line strings).
The dict is indexed by change version (an integer)
cc_list: List of people to aliases/emails to cc on this commit
+ notes: List of lines in the commit (not series) notes
"""
def __init__(self, hash):
self.hash = hash
self.tags = []
self.changes = {}
self.cc_list = []
+ self.notes = []
def AddChange(self, version, info):
"""Add a new change line to the change list for a version.
re_cover_cc = re.compile('^Cover-letter-cc: *(.*)')
# Patch series tag
-re_series = re.compile('^Series-([a-z-]*): *(.*)')
+re_series_tag = re.compile('^Series-([a-z-]*): *(.*)')
+
+# Commit series tag
+re_commit_tag = re.compile('^Commit-([a-z-]*): *(.*)')
# Commit tags that we want to collect and keep
re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Cc): (.*)')
if self.is_log:
self.series.AddTag(self.commit, line, name, value)
+ def AddToCommit(self, line, name, value):
+ """Add a new Commit-xxx tag.
+
+ When a Commit-xxx tag is detected, we come here to record it.
+
+ Args:
+ line: Source line containing tag (useful for debug/error messages)
+ name: Tag name (part after 'Commit-')
+ value: Tag value (part after 'Commit-xxx: ')
+ """
+ if name == 'notes':
+ self.in_section = 'commit-' + name
+ self.skip_blank = False
+
def CloseCommit(self):
"""Save the current commit into our commit list, and reset our state"""
if self.commit and self.is_log:
line = line[4:]
# Handle state transition and skipping blank lines
- series_match = re_series.match(line)
+ series_tag_match = re_series_tag.match(line)
+ commit_tag_match = re_commit_tag.match(line)
commit_match = re_commit.match(line) if self.is_log else None
cover_cc_match = re_cover_cc.match(line)
tag_match = None
elif self.in_section == 'notes':
if self.is_log:
self.series.notes += self.section
+ elif self.in_section == 'commit-notes':
+ if self.is_log:
+ self.commit.notes += self.section
else:
self.warn.append("Unknown section '%s'" % self.in_section)
self.in_section = None
self.commit.subject = line
# Detect the tags we want to remove, and skip blank lines
- elif re_remove.match(line):
+ elif re_remove.match(line) and not commit_tag_match:
self.skip_blank = True
# TEST= should be the last thing in the commit, so remove
self.skip_blank = False
# Detect Series-xxx tags
- elif series_match:
- name = series_match.group(1)
- value = series_match.group(2)
+ elif series_tag_match:
+ name = series_tag_match.group(1)
+ value = series_tag_match.group(2)
if name == 'changes':
# value is the version number: e.g. 1, or 2
try:
self.AddToSeries(line, name, value)
self.skip_blank = True
+ # Detect Commit-xxx tags
+ elif commit_tag_match:
+ name = commit_tag_match.group(1)
+ value = commit_tag_match.group(2)
+ if name == 'notes':
+ self.AddToCommit(line, name, value)
+ self.skip_blank = True
+
# Detect the start of a new commit
elif commit_match:
self.CloseCommit()
out = []
log = self.series.MakeChangeLog(self.commit)
out += self.FormatTags(self.tags)
- out += [line] + log
+ out += [line] + self.commit.notes + [''] + log
elif self.found_test:
if not re_allowed_after_test.match(line):
self.lines_after_test += 1
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-LOAD_ADDR = 0x40000
-
-include $(TOPDIR)/config.mk
-
-PROG = $(obj)updater
-IMAGE = $(obj)updater.image
-
-COBJS = update.o flash.o flash_hw.o utils.o cmd_flash.o string.o ctype.o dummy.o
-COBJS_LINKS = stubs.o
-AOBJS = ppcstring.o
-AOBJS_LINKS = memio.o
-
-OBJS := $(addprefix $(obj),$(COBJS) $(COBJS_LINKS) $(AOBJS) $(AOBJS_LINKS))
-SRCS := $(COBJS:.o=.c) $(AOBJS:.o=.S) $(addprefix $(obj), $(COBJS_LINKS:.o:.c) $(AOBJS_LINKS:.o:.S))
-
-CPPFLAGS += -I$(TOPDIR) -I$(TOPDIR)/board/MAI/AmigaOneG3SE
-CFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE
-AFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE
-
-DEPS = $(OBJTREE)/u-boot.bin $(OBJTREE)/tools/mkimage
-ifneq ($(DEPS),$(wildcard $(DEPS)))
-$(error "updater: Missing required objects, please run regular build first")
-endif
-
-all: $(obj).depend $(PROG) $(IMAGE)
-
-#########################################################################
-
-$(obj)%.srec: %.o $(LIB)
- $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB)
- $(OBJCOPY) -O srec $(<:.o=) $@
-
-$(obj)%.o: %.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-$(obj)%.o: %.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)memio.o: $(obj)memio.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)memio.S:
- rm -f $(obj)memio.c
- ln -s $(SRCTREE)/board/MAI/AmigaOneG3SE/memio.S $(obj)memio.S
-
-$(obj)stubs.o: $(obj)stubs.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-$(obj)stubs.c:
- rm -f $(obj)stubs.c
- ln -s $(SRCTREE)/examples/stubs.c $(obj)stubs.c
-
-#########################################################################
-
-$(obj)updater: $(OBJS)
- $(LD) -g -Ttext $(LOAD_ADDR) -o $(obj)updater -e _main $(OBJS)
- $(OBJCOPY) -O binary $(obj)updater $(obj)updater.bin
-
-$(obj)updater.image: $(obj)updater $(OBJTREE)/u-boot.bin
- cat >/tmp/tempimage $(obj)updater.bin junk $(OBJTREE)/u-boot.bin
- $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
- -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \
- -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image
- rm /tmp/tempimage
- cp $(obj)updater.image /tftpboot
-
-(obj)updater.image2: $(obj)updater $(OBJTREE)/u-boot.bin
- cat >/tmp/tempimage $(obj)updater.bin junk ../../create_image/image
- $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
- -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \
- -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image
- rm /tmp/tempimage
- cp $(obj)updater.image /tftpboot
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * FLASH support
- */
-#include <common.h>
-#include <command.h>
-#include <flash.h>
-
-#if defined(CONFIG_CMD_FLASH)
-
-extern flash_info_t flash_info[]; /* info for FLASH chips */
-
-/*
- * The user interface starts numbering for Flash banks with 1
- * for historical reasons.
- */
-
-/*
- * this routine looks for an abbreviated flash range specification.
- * the syntax is B:SF[-SL], where B is the bank number, SF is the first
- * sector to erase, and SL is the last sector to erase (defaults to SF).
- * bank numbers start at 1 to be consistent with other specs, sector numbers
- * start at zero.
- *
- * returns: 1 - correct spec; *pinfo, *psf and *psl are
- * set appropriately
- * 0 - doesn't look like an abbreviated spec
- * -1 - looks like an abbreviated spec, but got
- * a parsing error, a number out of range,
- * or an invalid flash bank.
- */
-static int
-abbrev_spec(char *str, flash_info_t **pinfo, int *psf, int *psl)
-{
- flash_info_t *fp;
- int bank, first, last;
- char *p, *ep;
-
- if ((p = strchr(str, ':')) == NULL)
- return 0;
- *p++ = '\0';
-
- bank = simple_strtoul(str, &ep, 10);
- if (ep == str || *ep != '\0' ||
- bank < 1 || bank > CONFIG_SYS_MAX_FLASH_BANKS ||
- (fp = &flash_info[bank - 1])->flash_id == FLASH_UNKNOWN)
- return -1;
-
- str = p;
- if ((p = strchr(str, '-')) != NULL)
- *p++ = '\0';
-
- first = simple_strtoul(str, &ep, 10);
- if (ep == str || *ep != '\0' || first >= fp->sector_count)
- return -1;
-
- if (p != NULL) {
- last = simple_strtoul(p, &ep, 10);
- if (ep == p || *ep != '\0' ||
- last < first || last >= fp->sector_count)
- return -1;
- }
- else
- last = first;
-
- *pinfo = fp;
- *psf = first;
- *psl = last;
-
- return 1;
-}
-int do_flinfo (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
- ulong bank;
-
- if (argc == 1) { /* print info for all FLASH banks */
- for (bank=0; bank <CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
- printf ("\nBank # %ld: ", bank+1);
-
- flash_print_info (&flash_info[bank]);
- }
- return 0;
- }
-
- bank = simple_strtoul(argv[1], NULL, 16);
- if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
- printf ("Only FLASH Banks # 1 ... # %d supported\n",
- CONFIG_SYS_MAX_FLASH_BANKS);
- return 1;
- }
- printf ("\nBank # %ld: ", bank);
- flash_print_info (&flash_info[bank-1]);
- return 0;
-}
-int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
- flash_info_t *info;
- ulong bank, addr_first, addr_last;
- int n, sect_first, sect_last;
- int rcode = 0;
-
- if (argc < 2)
- return cmd_usage(cmdtp);
-
- if (strcmp(argv[1], "all") == 0) {
- for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
- printf ("Erase Flash Bank # %ld ", bank);
- info = &flash_info[bank-1];
- rcode = flash_erase (info, 0, info->sector_count-1);
- }
- return rcode;
- }
-
- if ((n = abbrev_spec(argv[1], &info, §_first, §_last)) != 0) {
- if (n < 0) {
- printf("Bad sector specification\n");
- return 1;
- }
- printf ("Erase Flash Sectors %d-%d in Bank # %d ",
- sect_first, sect_last, (info-flash_info)+1);
- rcode = flash_erase(info, sect_first, sect_last);
- return rcode;
- }
-
- if (argc != 3)
- return cmd_usage(cmdtp);
-
- if (strcmp(argv[1], "bank") == 0) {
- bank = simple_strtoul(argv[2], NULL, 16);
- if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
- printf ("Only FLASH Banks # 1 ... # %d supported\n",
- CONFIG_SYS_MAX_FLASH_BANKS);
- return 1;
- }
- printf ("Erase Flash Bank # %ld ", bank);
- info = &flash_info[bank-1];
- rcode = flash_erase (info, 0, info->sector_count-1);
- return rcode;
- }
-
- addr_first = simple_strtoul(argv[1], NULL, 16);
- addr_last = simple_strtoul(argv[2], NULL, 16);
-
- if (addr_first >= addr_last)
- return cmd_usage(cmdtp);
-
- printf ("Erase Flash from 0x%08lx to 0x%08lx ", addr_first, addr_last);
- rcode = flash_sect_erase(addr_first, addr_last);
- return rcode;
-}
-
-int flash_sect_erase (ulong addr_first, ulong addr_last)
-{
- flash_info_t *info;
- ulong bank;
- int s_first, s_last;
- int erased;
- int rcode = 0;
-
- erased = 0;
-
- for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) {
- ulong b_end;
- int sect;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- continue;
- }
-
- b_end = info->start[0] + info->size - 1; /* bank end addr */
-
- s_first = -1; /* first sector to erase */
- s_last = -1; /* last sector to erase */
-
- for (sect=0; sect < info->sector_count; ++sect) {
- ulong end; /* last address in current sect */
- short s_end;
-
- s_end = info->sector_count - 1;
-
- end = (sect == s_end) ? b_end : info->start[sect + 1] - 1;
-
- if (addr_first > end)
- continue;
- if (addr_last < info->start[sect])
- continue;
-
- if (addr_first == info->start[sect]) {
- s_first = sect;
- }
- if (addr_last == end) {
- s_last = sect;
- }
- }
- if (s_first>=0 && s_first<=s_last) {
- erased += s_last - s_first + 1;
- rcode = flash_erase (info, s_first, s_last);
- }
- }
- if (erased) {
- /* printf ("Erased %d sectors\n", erased); */
- } else {
- printf ("Error: start and/or end address"
- " not on sector boundary\n");
- rcode = 1;
- }
- return rcode;
-}
-
-
-int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
- flash_info_t *info;
- ulong bank, addr_first, addr_last;
- int i, p, n, sect_first, sect_last;
- int rcode = 0;
-
- if (argc < 3)
- return cmd_usage(cmdtp);
-
- if (strcmp(argv[1], "off") == 0)
- p = 0;
- else if (strcmp(argv[1], "on") == 0)
- p = 1;
- else
- return cmd_usage(cmdtp);
-
- if (strcmp(argv[2], "all") == 0) {
- for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
- info = &flash_info[bank-1];
- if (info->flash_id == FLASH_UNKNOWN) {
- continue;
- }
- /*printf ("%sProtect Flash Bank # %ld\n", */
- /* p ? "" : "Un-", bank); */
-
- for (i=0; i<info->sector_count; ++i) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- if (flash_real_protect(info, i, p))
- rcode = 1;
- putc ('.');
-#else
- info->protect[i] = p;
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
- }
- }
-
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- if (!rcode) puts (" done\n");
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
-
- return rcode;
- }
-
- if ((n = abbrev_spec(argv[2], &info, §_first, §_last)) != 0) {
- if (n < 0) {
- printf("Bad sector specification\n");
- return 1;
- }
- /*printf("%sProtect Flash Sectors %d-%d in Bank # %d\n", */
- /* p ? "" : "Un-", sect_first, sect_last, */
- /* (info-flash_info)+1); */
- for (i = sect_first; i <= sect_last; i++) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- if (flash_real_protect(info, i, p))
- rcode = 1;
- putc ('.');
-#else
- info->protect[i] = p;
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
- }
-
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- if (!rcode) puts (" done\n");
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
-
- return rcode;
- }
-
- if (argc != 4)
- return cmd_usage(cmdtp);
-
- if (strcmp(argv[2], "bank") == 0) {
- bank = simple_strtoul(argv[3], NULL, 16);
- if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
- printf ("Only FLASH Banks # 1 ... # %d supported\n",
- CONFIG_SYS_MAX_FLASH_BANKS);
- return 1;
- }
- printf ("%sProtect Flash Bank # %ld\n",
- p ? "" : "Un-", bank);
- info = &flash_info[bank-1];
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return 1;
- }
- for (i=0; i<info->sector_count; ++i) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- if (flash_real_protect(info, i, p))
- rcode = 1;
- putc ('.');
-#else
- info->protect[i] = p;
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
- }
-
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- if (!rcode)
- puts(" done\n");
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
-
- return rcode;
- }
-
- addr_first = simple_strtoul(argv[2], NULL, 16);
- addr_last = simple_strtoul(argv[3], NULL, 16);
-
- if (addr_first >= addr_last)
- return cmd_usage(cmdtp);
-
- return flash_sect_protect (p, addr_first, addr_last);
-}
-int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
-{
- flash_info_t *info;
- ulong bank;
- int s_first, s_last;
- int protected, i;
- int rcode = 0;
-
- protected = 0;
-
- for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) {
- ulong b_end;
- int sect;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- continue;
- }
-
- b_end = info->start[0] + info->size - 1; /* bank end addr */
-
- s_first = -1; /* first sector to erase */
- s_last = -1; /* last sector to erase */
-
- for (sect=0; sect < info->sector_count; ++sect) {
- ulong end; /* last address in current sect */
- short s_end;
-
- s_end = info->sector_count - 1;
-
- end = (sect == s_end) ? b_end : info->start[sect + 1] - 1;
-
- if (addr_first > end)
- continue;
- if (addr_last < info->start[sect])
- continue;
-
- if (addr_first == info->start[sect]) {
- s_first = sect;
- }
- if (addr_last == end) {
- s_last = sect;
- }
- }
- if (s_first>=0 && s_first<=s_last) {
- protected += s_last - s_first + 1;
- for (i=s_first; i<=s_last; ++i) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- if (flash_real_protect(info, i, p))
- rcode = 1;
- putc ('.');
-#else
- info->protect[i] = p;
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
- }
- }
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- if (!rcode) putc ('\n');
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
-
- }
- if (protected) {
- /* printf ("%sProtected %d sectors\n", */
- /* p ? "" : "Un-", protected); */
- } else {
- printf ("Error: start and/or end address"
- " not on sector boundary\n");
- rcode = 1;
- }
- return rcode;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * linux/lib/ctype.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-#include <linux/ctype.h>
-
-unsigned char _ctype[] = {
-_C,_C,_C,_C,_C,_C,_C,_C, /* 0-7 */
-_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C, /* 8-15 */
-_C,_C,_C,_C,_C,_C,_C,_C, /* 16-23 */
-_C,_C,_C,_C,_C,_C,_C,_C, /* 24-31 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P, /* 32-39 */
-_P,_P,_P,_P,_P,_P,_P,_P, /* 40-47 */
-_D,_D,_D,_D,_D,_D,_D,_D, /* 48-55 */
-_D,_D,_P,_P,_P,_P,_P,_P, /* 56-63 */
-_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U, /* 64-71 */
-_U,_U,_U,_U,_U,_U,_U,_U, /* 72-79 */
-_U,_U,_U,_U,_U,_U,_U,_U, /* 80-87 */
-_U,_U,_U,_P,_P,_P,_P,_P, /* 88-95 */
-_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L, /* 96-103 */
-_L,_L,_L,_L,_L,_L,_L,_L, /* 104-111 */
-_L,_L,_L,_L,_L,_L,_L,_L, /* 112-119 */
-_L,_L,_L,_P,_P,_P,_P,_C, /* 120-127 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 160-175 */
-_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 176-191 */
-_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U, /* 192-207 */
-_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L, /* 208-223 */
-_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L, /* 224-239 */
-_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L}; /* 240-255 */
+++ /dev/null
-volatile int __dummy = 0xDEADBEEF;
+++ /dev/null
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <flash.h>
-
-extern flash_info_t flash_info[]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-/*-----------------------------------------------------------------------
- * Set protection status for monitor sectors
- *
- * The monitor is always located in the _first_ Flash bank.
- * If necessary you have to map the second bank at lower addresses.
- */
-void
-flash_protect (int flag, ulong from, ulong to, flash_info_t *info)
-{
- ulong b_end = info->start[0] + info->size - 1; /* bank end address */
- short s_end = info->sector_count - 1; /* index of last sector */
- int i;
-
- /* Do nothing if input data is bad. */
- if (info->sector_count == 0 || info->size == 0 || to < from) {
- return;
- }
-
- /* There is nothing to do if we have no data about the flash
- * or the protect range and flash range don't overlap.
- */
- if (info->flash_id == FLASH_UNKNOWN ||
- to < info->start[0] || from > b_end) {
- return;
- }
-
- for (i=0; i<info->sector_count; ++i) {
- ulong end; /* last address in current sect */
-
- end = (i == s_end) ? b_end : info->start[i + 1] - 1;
-
- /* Update protection if any part of the sector
- * is in the specified range.
- */
- if (from <= end && to >= info->start[i]) {
- if (flag & FLAG_PROTECT_CLEAR) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- flash_real_protect(info, i, 0);
-#else
- info->protect[i] = 0;
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
- }
- else if (flag & FLAG_PROTECT_SET) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
- flash_real_protect(info, i, 1);
-#else
- info->protect[i] = 1;
-#endif /* CONFIG_SYS_FLASH_PROTECTION */
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-
-flash_info_t *
-addr2info (ulong addr)
-{
-#ifndef CONFIG_SPD823TS
- flash_info_t *info;
- int i;
-
- for (i=0, info = &flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
- if (info->flash_id != FLASH_UNKNOWN &&
- addr >= info->start[0] &&
- /* WARNING - The '- 1' is needed if the flash
- * is at the end of the address space, since
- * info->start[0] + info->size wraps back to 0.
- * Please don't change this unless you understand this.
- */
- addr <= info->start[0] + info->size - 1) {
- return (info);
- }
- }
-#endif /* CONFIG_SPD823TS */
-
- return (NULL);
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- * Make sure all target addresses are within Flash bounds,
- * and no protected sectors are hit.
- * Returns:
- * ERR_OK 0 - OK
- * ERR_TIMOUT 1 - write timeout
- * ERR_NOT_ERASED 2 - Flash not erased
- * ERR_PROTECTED 4 - target range includes protected sectors
- * ERR_INVAL 8 - target address not in Flash memory
- * ERR_ALIGN 16 - target address not aligned on boundary
- * (only some targets require alignment)
- */
-int
-flash_write (char *src, ulong addr, ulong cnt)
-{
-#ifdef CONFIG_SPD823TS
- return (ERR_TIMOUT); /* any other error codes are possible as well */
-#else
- int i;
- ulong end = addr + cnt - 1;
- flash_info_t *info_first = addr2info (addr);
- flash_info_t *info_last = addr2info (end );
- flash_info_t *info;
- int j;
-
- if (cnt == 0) {
- return (ERR_OK);
- }
-
- if (!info_first || !info_last) {
- return (ERR_INVAL);
- }
-
- for (info = info_first; info <= info_last; ++info) {
- ulong b_end = info->start[0] + info->size; /* bank end addr */
- short s_end = info->sector_count - 1;
- for (i=0; i<info->sector_count; ++i) {
- ulong e_addr = (i == s_end) ? b_end : info->start[i + 1];
-
- if ((end >= info->start[i]) && (addr < e_addr) &&
- (info->protect[i] != 0) ) {
- return (ERR_PROTECTED);
- }
- }
- }
-
- printf("\rWriting ");
- for (j=0; j<20; j++) putc(177);
- printf("\rWriting ");
-
- /* finally write data to flash */
- for (info = info_first; info <= info_last && cnt>0; ++info) {
- ulong len;
-
- len = info->start[0] + info->size - addr;
- if (len > cnt)
- len = cnt;
-
- if ((i = write_buff(info, src, addr, len)) != 0) {
- return (i);
- }
- cnt -= len;
- addr += len;
- src += len;
- }
- return (ERR_OK);
-#endif /* CONFIG_SPD823TS */
-}
-
-/*-----------------------------------------------------------------------
- */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <flash.h>
-#include <asm/io.h>
-#include <memio.h>
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t flash_info[];
-
-static ulong flash_get_size (ulong addr, flash_info_t *info);
-static int flash_get_offsets (ulong base, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_reset (ulong addr);
-
-int flash_xd_nest;
-
-static void flash_to_xd(void)
-{
- unsigned char x;
-
- flash_xd_nest ++;
-
- if (flash_xd_nest == 1)
- {
- DEBUGF("Flash on XD\n");
- x = pci_read_cfg_byte(0, 0, 0x74);
- pci_write_cfg_byte(0, 0, 0x74, x|1);
- }
-}
-
-static void flash_to_mem(void)
-{
- unsigned char x;
-
- flash_xd_nest --;
-
- if (flash_xd_nest == 0)
- {
- DEBUGF("Flash on memory bus\n");
- x = pci_read_cfg_byte(0, 0, 0x74);
- pci_write_cfg_byte(0, 0, 0x74, x&0xFE);
- }
-}
-
-unsigned long flash_init_old(void)
-{
- int i;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = 0;
- flash_info[i].size = 0;
- }
-
-
- return 1;
-}
-
-unsigned long flash_init (void)
-{
- unsigned int i;
- unsigned long flash_size = 0;
-
- flash_xd_nest = 0;
-
- flash_to_xd();
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = 0;
- flash_info[i].size = 0;
- }
-
- DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE);
-
- flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info);
-
- DEBUGF("## Flash bank size: %08lx\n", flash_size);
-
- if (flash_size) {
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
- CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- } else {
- printf ("Warning: the BOOT Flash is not initialised !");
- }
-
- flash_to_mem();
-
- return flash_size;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (ulong addr, flash_info_t *info)
-{
- short i;
- uchar value;
- uchar *x = (uchar *)addr;
-
- flash_to_xd();
-
- /* Write auto select command: read Manufacturer ID */
- x[0x0555] = 0xAA;
- __asm__ volatile ("sync\n eieio");
- x[0x02AA] = 0x55;
- __asm__ volatile ("sync\n eieio");
- x[0x0555] = 0x90;
- __asm__ volatile ("sync\n eieio");
-
- value = x[0];
- __asm__ volatile ("sync\n eieio");
-
- DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value);
-
- switch (value | (value << 16)) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
-
- case STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- flash_reset (addr);
- return 0;
- }
-
- value = x[1];
- __asm__ volatile ("sync\n eieio");
-
- DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value);
-
- switch (value) {
- case AMD_ID_F040B:
- DEBUGF("Am29F040B\n");
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case AMD_ID_LV040B:
- DEBUGF("Am29LV040B\n");
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case AMD_ID_LV400T:
- DEBUGF("Am29LV400T\n");
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- DEBUGF("Am29LV400B\n");
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- DEBUGF("Am29LV800T\n");
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- DEBUGF("Am29LV400B\n");
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- DEBUGF("Am29LV160T\n");
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- DEBUGF("Am29LV160B\n");
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV320T:
- DEBUGF("Am29LV320T\n");
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
-#if 0
- /* Has the same ID as AMD_ID_LV320T, to be fixed */
- case AMD_ID_LV320B:
- DEBUGF("Am29LV320B\n");
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
-
- case AMD_ID_LV033C:
- DEBUGF("Am29LV033C\n");
- info->flash_id += FLASH_AM033C;
- info->sector_count = 64;
- info->size = 0x01000000;
- break; /* => 16Mb */
-
- case STM_ID_F040B:
- DEBUGF("M29F040B\n");
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- flash_reset (addr);
- flash_to_mem();
- return (0); /* => no or unknown flash */
-
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- if (! flash_get_offsets (addr, info)) {
- flash_reset (addr);
- flash_to_mem();
- return 0;
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- value = in8(info->start[i] + 2);
- iobarrier_rw();
- info->protect[i] = (value & 1) != 0;
- }
-
- /*
- * Reset bank to read mode
- */
- flash_reset (addr);
-
- flash_to_mem();
-
- return (info->size);
-}
-
-static int flash_get_offsets (ulong base, flash_info_t *info)
-{
- unsigned int i;
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- /* set sector offsets for uniform sector type */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + i * info->size /
- info->sector_count;
- }
- break;
- default:
- return 0;
- }
-
- return 1;
-}
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile ulong addr = info->start[0];
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- flash_to_xd();
-
- if (s_first < 0 || s_first > s_last) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- flash_to_mem();
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- flash_to_mem();
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- out8(addr + 0x555, 0xAA);
- iobarrier_rw();
- out8(addr + 0x2AA, 0x55);
- iobarrier_rw();
- out8(addr + 0x555, 0x80);
- iobarrier_rw();
- out8(addr + 0x555, 0xAA);
- iobarrier_rw();
- out8(addr + 0x2AA, 0x55);
- iobarrier_rw();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = info->start[sect];
- out8(addr, 0x30);
- iobarrier_rw();
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = info->start[l_sect];
-
- DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT);
-
- while ((in8(addr) & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- flash_reset (info->start[0]);
- flash_to_mem();
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- iobarrier_rw();
- }
-
-DONE:
- /* reset to read mode */
- flash_reset (info->start[0]);
- flash_to_mem();
-
- printf (" done\n");
- return 0;
-}
-
-/*
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
- ulong out_cnt = 0;
-
- flash_to_xd();
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- flash_to_mem();
- return (rc);
- }
- wp += 4;
- }
-
- putc(219);
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- if (out_cnt>26214)
- {
- putc(219);
- out_cnt = 0;
- }
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- flash_to_mem();
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- out_cnt += 4;
- }
-
- if (cnt == 0) {
- flash_to_mem();
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- flash_to_mem();
- return (write_word(info, wp, data));
-}
-
-/*
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- volatile ulong addr = info->start[0];
- ulong start;
- int i;
-
- flash_to_xd();
-
- /* Check if Flash is (sufficiently) erased */
- if ((in32(dest) & data) != data) {
- flash_to_mem();
- return (2);
- }
-
- /* write each byte out */
- for (i = 0; i < 4; i++) {
- char *data_ch = (char *)&data;
- int flag = disable_interrupts();
-
- out8(addr + 0x555, 0xAA);
- iobarrier_rw();
- out8(addr + 0x2AA, 0x55);
- iobarrier_rw();
- out8(addr + 0x555, 0xA0);
- iobarrier_rw();
- out8(dest+i, data_ch[i]);
- iobarrier_rw();
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- flash_reset (addr);
- flash_to_mem();
- return (1);
- }
- iobarrier_rw();
- }
- }
-
- flash_reset (addr);
- flash_to_mem();
- return (0);
-}
-
-/*
- * Reset bank to read mode
- */
-static void flash_reset (ulong addr)
-{
- flash_to_xd();
- out8(addr, 0xF0); /* reset bank */
- iobarrier_rw();
- flash_to_mem();
-}
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_STM: printf ("SGS THOMSON "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- if (info->size % 0x100000 == 0) {
- printf (" Size: %ld MB in %d Sectors\n",
- info->size / 0x100000, info->sector_count);
- } else if (info->size % 0x400 == 0) {
- printf (" Size: %ld KB in %d Sectors\n",
- info->size / 0x400, info->sector_count);
- } else {
- printf (" Size: %ld B in %d Sectors\n",
- info->size, info->sector_count);
- }
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
-}
+++ /dev/null
-................................................................................................................................................................................................................................................................
\ No newline at end of file
+++ /dev/null
-/*
- * String handling functions for PowerPC.
- *
- * Copyright (C) 1996 Paul Mackerras.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <ppc_asm.tmpl>
-#include <asm/errno.h>
-
- .globl strcpy
-strcpy:
- addi r5,r3,-1
- addi r4,r4,-1
-1: lbzu r0,1(r4)
- cmpwi 0,r0,0
- stbu r0,1(r5)
- bne 1b
- blr
-
- .globl strncpy
-strncpy:
- cmpwi 0,r5,0
- beqlr
- mtctr r5
- addi r6,r3,-1
- addi r4,r4,-1
-1: lbzu r0,1(r4)
- cmpwi 0,r0,0
- stbu r0,1(r6)
- bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */
- blr
-
- .globl strcat
-strcat:
- addi r5,r3,-1
- addi r4,r4,-1
-1: lbzu r0,1(r5)
- cmpwi 0,r0,0
- bne 1b
- addi r5,r5,-1
-1: lbzu r0,1(r4)
- cmpwi 0,r0,0
- stbu r0,1(r5)
- bne 1b
- blr
-
- .globl strcmp
-strcmp:
- addi r5,r3,-1
- addi r4,r4,-1
-1: lbzu r3,1(r5)
- cmpwi 1,r3,0
- lbzu r0,1(r4)
- subf. r3,r0,r3
- beqlr 1
- beq 1b
- blr
-
- .globl strlen
-strlen:
- addi r4,r3,-1
-1: lbzu r0,1(r4)
- cmpwi 0,r0,0
- bne 1b
- subf r3,r3,r4
- blr
-
- .globl memset
-memset:
- rlwimi r4,r4,8,16,23
- rlwimi r4,r4,16,0,15
- addi r6,r3,-4
- cmplwi 0,r5,4
- blt 7f
- stwu r4,4(r6)
- beqlr
- andi. r0,r6,3
- add r5,r0,r5
- subf r6,r0,r6
- rlwinm r0,r5,32-2,2,31
- mtctr r0
- bdz 6f
-1: stwu r4,4(r6)
- bdnz 1b
-6: andi. r5,r5,3
-7: cmpwi 0,r5,0
- beqlr
- mtctr r5
- addi r6,r6,3
-8: stbu r4,1(r6)
- bdnz 8b
- blr
-
- .globl bcopy
-bcopy:
- mr r6,r3
- mr r3,r4
- mr r4,r6
- b memcpy
-
- .globl memmove
-memmove:
- cmplw 0,r3,r4
- bgt backwards_memcpy
- /* fall through */
-
- .globl memcpy
-memcpy:
- rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
- addi r6,r3,-4
- addi r4,r4,-4
- beq 2f /* if less than 8 bytes to do */
- andi. r0,r6,3 /* get dest word aligned */
- mtctr r7
- bne 5f
-1: lwz r7,4(r4)
- lwzu r8,8(r4)
- stw r7,4(r6)
- stwu r8,8(r6)
- bdnz 1b
- andi. r5,r5,7
-2: cmplwi 0,r5,4
- blt 3f
- lwzu r0,4(r4)
- addi r5,r5,-4
- stwu r0,4(r6)
-3: cmpwi 0,r5,0
- beqlr
- mtctr r5
- addi r4,r4,3
- addi r6,r6,3
-4: lbzu r0,1(r4)
- stbu r0,1(r6)
- bdnz 4b
- blr
-5: subfic r0,r0,4
- mtctr r0
-6: lbz r7,4(r4)
- addi r4,r4,1
- stb r7,4(r6)
- addi r6,r6,1
- bdnz 6b
- subf r5,r0,r5
- rlwinm. r7,r5,32-3,3,31
- beq 2b
- mtctr r7
- b 1b
-
- .globl backwards_memcpy
-backwards_memcpy:
- rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
- add r6,r3,r5
- add r4,r4,r5
- beq 2f
- andi. r0,r6,3
- mtctr r7
- bne 5f
-1: lwz r7,-4(r4)
- lwzu r8,-8(r4)
- stw r7,-4(r6)
- stwu r8,-8(r6)
- bdnz 1b
- andi. r5,r5,7
-2: cmplwi 0,r5,4
- blt 3f
- lwzu r0,-4(r4)
- subi r5,r5,4
- stwu r0,-4(r6)
-3: cmpwi 0,r5,0
- beqlr
- mtctr r5
-4: lbzu r0,-1(r4)
- stbu r0,-1(r6)
- bdnz 4b
- blr
-5: mtctr r0
-6: lbzu r7,-1(r4)
- stbu r7,-1(r6)
- bdnz 6b
- subf r5,r0,r5
- rlwinm. r7,r5,32-3,3,31
- beq 2b
- mtctr r7
- b 1b
-
- .globl memcmp
-memcmp:
- cmpwi 0,r5,0
- ble- 2f
- mtctr r5
- addi r6,r3,-1
- addi r4,r4,-1
-1: lbzu r3,1(r6)
- lbzu r0,1(r4)
- subf. r3,r0,r3
- bdnzt 2,1b
- blr
-2: li r3,0
- blr
-
- .global memchr
-memchr:
- cmpwi 0,r5,0
- ble- 2f
- mtctr r5
- addi r3,r3,-1
-1: lbzu r0,1(r3)
- cmpw 0,r0,r4
- bdnzf 2,1b
- beqlr
-2: li r3,0
- blr
+++ /dev/null
-/*
- * linux/lib/string.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-/*
- * stupid library routines.. The optimized versions should generally be found
- * as inline code in <asm-xx/string.h>
- *
- * These are buggy as well..
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <malloc.h>
-
-#define __HAVE_ARCH_BCOPY
-#define __HAVE_ARCH_MEMCMP
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMMOVE
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_STRCAT
-#define __HAVE_ARCH_STRCMP
-#define __HAVE_ARCH_STRCPY
-#define __HAVE_ARCH_STRLEN
-#define __HAVE_ARCH_STRNCPY
-
-char * ___strtok = NULL;
-
-#ifndef __HAVE_ARCH_STRCPY
-char * strcpy(char * dest,const char *src)
-{
- char *tmp = dest;
-
- while ((*dest++ = *src++) != '\0')
- /* nothing */;
- return tmp;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRNCPY
-char * strncpy(char * dest,const char *src,size_t count)
-{
- char *tmp = dest;
-
- while (count-- && (*dest++ = *src++) != '\0')
- /* nothing */;
-
- return tmp;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRCAT
-char * strcat(char * dest, const char * src)
-{
- char *tmp = dest;
-
- while (*dest)
- dest++;
- while ((*dest++ = *src++) != '\0')
- ;
-
- return tmp;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRNCAT
-char * strncat(char *dest, const char *src, size_t count)
-{
- char *tmp = dest;
-
- if (count) {
- while (*dest)
- dest++;
- while ((*dest++ = *src++)) {
- if (--count == 0) {
- *dest = '\0';
- break;
- }
- }
- }
-
- return tmp;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRCMP
-int strcmp(const char * cs,const char * ct)
-{
- register signed char __res;
-
- while (1) {
- if ((__res = *cs - *ct++) != 0 || !*cs++)
- break;
- }
-
- return __res;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRNCMP
-int strncmp(const char * cs,const char * ct,size_t count)
-{
- register signed char __res = 0;
-
- while (count) {
- if ((__res = *cs - *ct++) != 0 || !*cs++)
- break;
- count--;
- }
-
- return __res;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRCHR
-char * strchr(const char * s, int c)
-{
- for(; *s != (char) c; ++s)
- if (*s == '\0')
- return NULL;
- return (char *) s;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRRCHR
-char * strrchr(const char * s, int c)
-{
- const char *p = s + strlen(s);
- do {
- if (*p == (char)c)
- return (char *)p;
- } while (--p >= s);
- return NULL;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRLEN
-size_t strlen(const char * s)
-{
- const char *sc;
-
- for (sc = s; *sc != '\0'; ++sc)
- /* nothing */;
- return sc - s;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRNLEN
-size_t strnlen(const char * s, size_t count)
-{
- const char *sc;
-
- for (sc = s; count-- && *sc != '\0'; ++sc)
- /* nothing */;
- return sc - s;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRDUP
-char * strdup(const char *s)
-{
- char *new;
-
- if ((s == NULL) ||
- ((new = malloc (strlen(s) + 1)) == NULL) ) {
- return NULL;
- }
-
- strcpy (new, s);
- return new;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRSPN
-size_t strspn(const char *s, const char *accept)
-{
- const char *p;
- const char *a;
- size_t count = 0;
-
- for (p = s; *p != '\0'; ++p) {
- for (a = accept; *a != '\0'; ++a) {
- if (*p == *a)
- break;
- }
- if (*a == '\0')
- return count;
- ++count;
- }
-
- return count;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRPBRK
-char * strpbrk(const char * cs,const char * ct)
-{
- const char *sc1,*sc2;
-
- for( sc1 = cs; *sc1 != '\0'; ++sc1) {
- for( sc2 = ct; *sc2 != '\0'; ++sc2) {
- if (*sc1 == *sc2)
- return (char *) sc1;
- }
- }
- return NULL;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRTOK
-char * strtok(char * s,const char * ct)
-{
- char *sbegin, *send;
-
- sbegin = s ? s : ___strtok;
- if (!sbegin) {
- return NULL;
- }
- sbegin += strspn(sbegin,ct);
- if (*sbegin == '\0') {
- ___strtok = NULL;
- return( NULL );
- }
- send = strpbrk( sbegin, ct);
- if (send && *send != '\0')
- *send++ = '\0';
- ___strtok = send;
- return (sbegin);
-}
-#endif
-
-#ifndef __HAVE_ARCH_MEMSET
-void * memset(void * s,char c,size_t count)
-{
- char *xs = (char *) s;
-
- while (count--)
- *xs++ = c;
-
- return s;
-}
-#endif
-
-#ifndef __HAVE_ARCH_BCOPY
-char * bcopy(const char * src, char * dest, int count)
-{
- char *tmp = dest;
-
- while (count--)
- *tmp++ = *src++;
-
- return dest;
-}
-#endif
-
-#ifndef __HAVE_ARCH_MEMCPY
-void * memcpy(void * dest,const void *src,size_t count)
-{
- char *tmp = (char *) dest, *s = (char *) src;
-
- while (count--)
- *tmp++ = *s++;
-
- return dest;
-}
-#endif
-
-#ifndef __HAVE_ARCH_MEMMOVE
-void * memmove(void * dest,const void *src,size_t count)
-{
- char *tmp, *s;
-
- if (dest <= src) {
- tmp = (char *) dest;
- s = (char *) src;
- while (count--)
- *tmp++ = *s++;
- }
- else {
- tmp = (char *) dest + count;
- s = (char *) src + count;
- while (count--)
- *--tmp = *--s;
- }
-
- return dest;
-}
-#endif
-
-#ifndef __HAVE_ARCH_MEMCMP
-int memcmp(const void * cs,const void * ct,size_t count)
-{
- const unsigned char *su1, *su2;
- signed char res = 0;
-
- for( su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
- if ((res = *su1 - *su2) != 0)
- break;
- return res;
-}
-#endif
-
-/*
- * find the first occurrence of byte 'c', or 1 past the area if none
- */
-#ifndef __HAVE_ARCH_MEMSCAN
-void * memscan(void * addr, int c, size_t size)
-{
- unsigned char * p = (unsigned char *) addr;
-
- while (size) {
- if (*p == c)
- return (void *) p;
- p++;
- size--;
- }
- return (void *) p;
-}
-#endif
-
-#ifndef __HAVE_ARCH_STRSTR
-char * strstr(const char * s1,const char * s2)
-{
- int l1, l2;
-
- l2 = strlen(s2);
- if (!l2)
- return (char *) s1;
- l1 = strlen(s1);
- while (l1 >= l2) {
- l1--;
- if (!memcmp(s1,s2,l2))
- return (char *) s1;
- s1++;
- }
- return NULL;
-}
-#endif
+++ /dev/null
-#include <common.h>
-#include <exports.h>
-
-extern unsigned long __dummy;
-void do_reset (void);
-void do_updater(void);
-
-void _main(void)
-{
- int i;
- printf("U-Boot Firmware Updater\n\n\n");
- printf("****************************************************\n"
- "* ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY! *\n"
- "****************************************************\n\n"
- "This program will update your computer's firmware.\n"
- "Do NOT remove the disk, reset the machine, or do\n"
- "anything that might disrupt functionality. If this\n");
- printf("Program fails, your computer might be unusable, and\n"
- "you will need to return your board for reflashing.\n"
- "If you find this too risky, remove the diskette and\n"
- "switch off your machine now. Otherwise press the \n"
- "SPACE key now to start the process\n\n");
- do
- {
- char x;
- while (!tstc());
- x = getc();
- if (x == ' ') break;
- } while (1);
-
- do_updater();
-
- i = 5;
-
- printf("\nUpdate done. Please remove diskette.\n");
- printf("The machine will automatically reset in %d seconds\n", i);
- printf("You can switch off/reset now when the floppy is removed\n\n");
-
- while (i)
- {
- printf("Resetting in %d\r", i);
- udelay(1000000);
- i--;
- }
- do_reset();
- while (1);
-}
-
-void do_updater(void)
-{
- unsigned long *addr = &__dummy + 65;
- unsigned long flash_size = flash_init();
- int rc;
-
- flash_sect_protect(0, 0xFFF00000, 0xFFF7FFFF);
- printf("Erasing ");
- flash_sect_erase(0xFFF00000, 0xFFF7FFFF);
- printf("Writing ");
- rc = flash_write((uchar *)addr, 0xFFF00000, 0x7FFFF);
- if (rc != 0) printf("\nFlashing failed due to error %d\n", rc);
- else printf("\ndone\n");
- flash_sect_protect(1, 0xFFF00000, 0xFFF7FFFF);
-}
+++ /dev/null
-#include <common.h>
-#include <asm/processor.h>
-#include <memio.h>
-#include <linux/ctype.h>
-
-static __inline__ unsigned long
-get_msr(void)
-{
- unsigned long msr;
-
- asm volatile("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
-
-static __inline__ void
-set_msr(unsigned long msr)
-{
- asm volatile("mtmsr %0" : : "r" (msr));
-}
-
-static __inline__ unsigned long
-get_dec(void)
-{
- unsigned long val;
-
- asm volatile("mfdec %0" : "=r" (val) :);
- return val;
-}
-
-
-static __inline__ void
-set_dec(unsigned long val)
-{
- asm volatile("mtdec %0" : : "r" (val));
-}
-
-
-void
-enable_interrupts(void)
-{
- set_msr (get_msr() | MSR_EE);
-}
-
-/* returns flag if MSR_EE was set before */
-int
-disable_interrupts(void)
-{
- ulong msr;
-
- msr = get_msr();
- set_msr (msr & ~MSR_EE);
- return ((msr & MSR_EE) != 0);
-}
-
-u8 in8(u32 port)
-{
- return in_byte(port);
-}
-
-void out8(u32 port, u8 val)
-{
- out_byte(port, val);
-}
-
-unsigned long in32(u32 port)
-{
- return in_long(port);
-}
-
-unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base)
-{
- unsigned long result = 0,value;
-
- if (*cp == '0') {
- cp++;
- if ((*cp == 'x') && isxdigit(cp[1])) {
- base = 16;
- cp++;
- }
- if (!base) {
- base = 8;
- }
- }
- if (!base) {
- base = 10;
- }
- while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp)
- ? toupper(*cp) : *cp)-'A'+10) < base) {
- result = result*base + value;
- cp++;
- }
- if (endp)
- *endp = (char *)cp;
- return result;
-}
-
-long simple_strtol(const char *cp,char **endp,unsigned int base)
-{
- if(*cp=='-')
- return -simple_strtoul(cp+1,endp,base);
- return simple_strtoul(cp,endp,base);
-}
-
-static inline void
-soft_restart(unsigned long addr)
-{
- /* SRR0 has system reset vector, SRR1 has default MSR value */
- /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-
- __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr));
- __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4");
- __asm__ __volatile__ ("mtspr 27, 4");
- __asm__ __volatile__ ("rfi");
-
- while(1); /* not reached */
-}
-
-void
-do_reset (void)
-{
- ulong addr;
- /* flush and disable I/D cache */
- __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
- __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
- __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4");
- __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 4");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 5");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
-
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
- * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
- * address. Better pick an address known to be invalid on your
- * system and assign it to CONFIG_SYS_RESET_ADDRESS.
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- soft_restart(addr);
- while(1); /* not reached */
-}
projects / karo-tx-uboot.git / commitdiff