/* NOENV U-Boot is used for initial bootstrap.
* Since the TAMPER_PIN_DISABLE fuses have to be programmed
* to be able to use the TAMPER pins as GPIO to access the
* PMIC I2C bus, this is not possible on virgin hardware.
*/
/* NOENV U-Boot is used for initial bootstrap.
* Since the TAMPER_PIN_DISABLE fuses have to be programmed
* to be able to use the TAMPER pins as GPIO to access the
* PMIC I2C bus, this is not possible on virgin hardware.
*/
#define CONFIG_SOFT_I2C_GPIO_SCL IMX_GPIO_NR(5, 0)
#define CONFIG_SOFT_I2C_GPIO_SDA IMX_GPIO_NR(5, 1)
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_SOFT_I2C_GPIO_SCL IMX_GPIO_NR(5, 0)
#define CONFIG_SOFT_I2C_GPIO_SDA IMX_GPIO_NR(5, 1)
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_LTC3676 /* TX6_REV == 1 */
#endif /* CONFIG_SOC_MX6UL */
#define CONFIG_RN5T567 /* TX6_REV == 3 */
#define CONFIG_LTC3676 /* TX6_REV == 1 */
#endif /* CONFIG_SOC_MX6UL */
#define CONFIG_RN5T567 /* TX6_REV == 3 */