obj-y += cpu.o
obj-y += syslib.o
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),)
ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += timer.o
+obj-y += board.o
obj-y += clock.o
obj-y += pinmux.o
obj-$(CONFIG_SUN7I) += clock_sun4i.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += cpu_info.o
+endif
+
+ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SUN7I) += dram.o
+ifdef CONFIG_SPL_FEL
+obj-y += start.o
+endif
+endif
--- /dev/null
+/*
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some init for sunxi platform.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <serial.h>
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#endif
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/timer.h>
+
+#ifdef CONFIG_SPL_BUILD
+/* Pointer to the global data structure for SPL */
+DECLARE_GLOBAL_DATA_PTR;
+
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ * Unfortunately we can't check how SPL was loaded so assume
+ * it's always the first SD/MMC controller
+ */
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_MMC1;
+}
+
+/* No confirmation data available in SPL yet. Hardcode bootmode */
+u32 spl_boot_mode(void)
+{
+ return MMCSD_MODE_RAW;
+}
+#endif
+
+int gpio_init(void)
+{
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
+ sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
+
+/* do some early init */
+void s_init(void)
+{
+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
+ /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
+ asm volatile(
+ "mrc p15, 0, r0, c1, c0, 1\n"
+ "orr r0, r0, #1 << 6\n"
+ "mcr p15, 0, r0, c1, c0, 1\n");
+#endif
+
+ clock_init();
+ timer_init();
+ gpio_init();
+
+#ifdef CONFIG_SPL_BUILD
+ gd = &gdata;
+ preloader_console_init();
+
+ sunxi_board_init();
+#endif
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+ puts("CPU: Allwinner A20 (SUN7I)\n");
+ return 0;
+}
+#endif
--- /dev/null
+/* Intentionally empty. Only needed to get FEL SPL link line right */
--- /dev/null
+/*
+ * (C) Copyright 2013
+ * Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(s_init)
+SECTIONS
+{
+ . = 0x00002000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text.s_init)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+ . = .;
+
+ . = ALIGN(4);
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ . = ALIGN(4);
+ .note.gnu.build-id :
+ {
+ *(.note.gnu.build-id)
+ }
+ _end = .;
+
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ __bss_base = .;
+ }
+
+ .bss __bss_base (OVERLAY) : {
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_limit = .;
+ }
+
+ .bss_end __bss_limit (OVERLAY) : {
+ KEEP(*(.__bss_end));
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+ /DISCARD/ : { *(.note*) }
+}
--- /dev/null
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CPU_H
+#define _SUNXI_CPU_H
+
+#define SUNXI_SRAM_A1_BASE 0x00000000
+#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */
+
+#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */
+#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */
+#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */
+#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */
+#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */
+
+#define SUNXI_SRAMC_BASE 0x01c00000
+#define SUNXI_DRAMC_BASE 0x01c01000
+#define SUNXI_DMA_BASE 0x01c02000
+#define SUNXI_NFC_BASE 0x01c03000
+#define SUNXI_TS_BASE 0x01c04000
+#define SUNXI_SPI0_BASE 0x01c05000
+#define SUNXI_SPI1_BASE 0x01c06000
+#define SUNXI_MS_BASE 0x01c07000
+#define SUNXI_TVD_BASE 0x01c08000
+#define SUNXI_CSI0_BASE 0x01c09000
+#define SUNXI_TVE0_BASE 0x01c0a000
+#define SUNXI_EMAC_BASE 0x01c0b000
+#define SUNXI_LCD0_BASE 0x01c0C000
+#define SUNXI_LCD1_BASE 0x01c0d000
+#define SUNXI_VE_BASE 0x01c0e000
+#define SUNXI_MMC0_BASE 0x01c0f000
+#define SUNXI_MMC1_BASE 0x01c10000
+#define SUNXI_MMC2_BASE 0x01c11000
+#define SUNXI_MMC3_BASE 0x01c12000
+#define SUNXI_USB0_BASE 0x01c13000
+#define SUNXI_USB1_BASE 0x01c14000
+#define SUNXI_SS_BASE 0x01c15000
+#define SUNXI_HDMI_BASE 0x01c16000
+#define SUNXI_SPI2_BASE 0x01c17000
+#define SUNXI_SATA_BASE 0x01c18000
+#define SUNXI_PATA_BASE 0x01c19000
+#define SUNXI_ACE_BASE 0x01c1a000
+#define SUNXI_TVE1_BASE 0x01c1b000
+#define SUNXI_USB2_BASE 0x01c1c000
+#define SUNXI_CSI1_BASE 0x01c1d000
+#define SUNXI_TZASC_BASE 0x01c1e000
+#define SUNXI_SPI3_BASE 0x01c1f000
+
+#define SUNXI_CCM_BASE 0x01c20000
+#define SUNXI_INTC_BASE 0x01c20400
+#define SUNXI_PIO_BASE 0x01c20800
+#define SUNXI_TIMER_BASE 0x01c20c00
+#define SUNXI_SPDIF_BASE 0x01c21000
+#define SUNXI_AC97_BASE 0x01c21400
+#define SUNXI_IR0_BASE 0x01c21800
+#define SUNXI_IR1_BASE 0x01c21c00
+
+#define SUNXI_IIS_BASE 0x01c22400
+#define SUNXI_LRADC_BASE 0x01c22800
+#define SUNXI_AD_DA_BASE 0x01c22c00
+#define SUNXI_KEYPAD_BASE 0x01c23000
+#define SUNXI_TZPC_BASE 0x01c23400
+#define SUNXI_SID_BASE 0x01c23800
+#define SUNXI_SJTAG_BASE 0x01c23c00
+
+#define SUNXI_TP_BASE 0x01c25000
+#define SUNXI_PMU_BASE 0x01c25400
+#define SUNXI_CPUCFG_BASE 0x01c25c00
+
+#define SUNXI_UART0_BASE 0x01c28000
+#define SUNXI_UART1_BASE 0x01c28400
+#define SUNXI_UART2_BASE 0x01c28800
+#define SUNXI_UART3_BASE 0x01c28c00
+#define SUNXI_UART4_BASE 0x01c29000
+#define SUNXI_UART5_BASE 0x01c29400
+#define SUNXI_UART6_BASE 0x01c29800
+#define SUNXI_UART7_BASE 0x01c29c00
+#define SUNXI_PS2_0_BASE 0x01c2a000
+#define SUNXI_PS2_1_BASE 0x01c2a400
+
+#define SUNXI_TWI0_BASE 0x01c2ac00
+#define SUNXI_TWI1_BASE 0x01c2b000
+#define SUNXI_TWI2_BASE 0x01c2b400
+
+#define SUNXI_CAN_BASE 0x01c2bc00
+
+#define SUNXI_SCR_BASE 0x01c2c400
+
+#define SUNXI_GPS_BASE 0x01c30000
+#define SUNXI_MALI400_BASE 0x01c40000
+#define SUNXI_GMAC_BASE 0x01c50000
+
+/* module sram */
+#define SUNXI_SRAM_C_BASE 0x01d00000
+
+#define SUNXI_DE_FE0_BASE 0x01e00000
+#define SUNXI_DE_FE1_BASE 0x01e20000
+#define SUNXI_DE_BE0_BASE 0x01e60000
+#define SUNXI_DE_BE1_BASE 0x01e40000
+#define SUNXI_MP_BASE 0x01e80000
+#define SUNXI_AVG_BASE 0x01ea0000
+
+/* CoreSight Debug Module */
+#define SUNXI_CSDM_BASE 0x3f500000
+
+#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */
+
+#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */
+
+#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c)
+
+#ifndef __ASSEMBLY__
+void sunxi_board_init(void);
+void sunxi_reset(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _CPU_H */
--- /dev/null
+/*
+ * This is a copy of omap3/spl.h:
+ *
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_SPL_H_
+
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_NAND 2
+#define BOOT_DEVICE_ONE_NAND 3
+#define BOOT_DEVICE_MMC2 5 /*emmc*/
+#define BOOT_DEVICE_MMC1 6
+#define BOOT_DEVICE_XIPWAIT 7
+#define BOOT_DEVICE_MMC2_2 0xff
+#endif
--- /dev/null
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other board Makefile
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+obj-y += board.o
--- /dev/null
+/*
+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some board init for the Allwinner A10-evb board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* add board specific code here */
+int board_init(void)
+{
+ int id_pfr1;
+
+ gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
+
+ asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
+ debug("id_pfr1: 0x%08x\n", id_pfr1);
+ /* Generic Timer Extension available? */
+ if ((id_pfr1 >> 16) & 0xf) {
+ debug("Setting CNTFRQ\n");
+ /* CNTFRQ == 24 MHz */
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
+ }
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+void sunxi_board_init(void)
+{
+ unsigned long ramsize;
+
+ printf("DRAM:");
+ ramsize = sunxi_dram_init();
+ printf(" %lu MiB\n", ramsize >> 20);
+ if (!ramsize)
+ hang();
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * Configuration settings for the Allwinner A20 (sun7i) CPU
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * A20 specific configuration
+ */
+#define CONFIG_SUN7I /* sun7i SoC generation */
+
+#define CONFIG_SYS_PROMPT "sun7i# "
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Configuration settings for the Allwinner sunxi series of boards.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_COMMON_CONFIG_H
+#define _SUNXI_COMMON_CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_SUNXI /* sunxi family */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_SYS_TEXT_BASE 0x4a000000
+
+/*
+ * Display CPU information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+
+/* Serial & console */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+/* ns16550 reg in the low bits of cpu reg */
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_CLK 24000000
+#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
+#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
+#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
+#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
+
+/* DRAM Base */
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x0
+#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_SETEXPR
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+/* 4MB of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_CMD_ECHO
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR 0x48000000 /* default load address */
+
+/* standalone support */
+#define CONFIG_STANDALONE_LOAD_ADDR 0x48000000
+
+#define CONFIG_SYS_HZ 1000
+
+/* baudrate */
+#define CONFIG_BAUDRATE 115200
+
+/* The stack sizes are set up in start.S using the settings below */
+#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
+
+/* FLASH and environment organization */
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */
+#define CONFIG_IDENT_STRING " Allwinner Technology"
+
+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootm_size=0x10000000\0"
+
+#define CONFIG_SYS_BOOT_GET_CMDLINE
+
+#include <config_cmd_default.h>
+
+#define CONFIG_FAT_WRITE /* enable write access */
+
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+
+#define CONFIG_SPL
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"
+#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"
+#define CONFIG_SPL_TEXT_BASE 0x2000
+#define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */
+/* end of 32 KiB in sram */
+#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_CONS_INDEX 1 /* UART0 */
+
+#if !defined CONFIG_ENV_IS_IN_MMC && \
+ !defined CONFIG_ENV_IS_IN_NAND && \
+ !defined CONFIG_ENV_IS_IN_FAT && \
+ !defined CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#endif
+
+#endif /* _SUNXI_COMMON_CONFIG_H */
projects / karo-tx-uboot.git / commitdiff