Board code has addition modification that it wants to make
to the flat device tree before handing it off to the kernel
+ CONFIG_OF_SYSTEM_SETUP
+
+ Other code has addition modification that it wants to make
+ to the flat device tree before handing it off to the kernel.
+ This causes ft_system_setup() to be called before booting
+ the kernel.
+
CONFIG_OF_BOOT_CPU
This define fills in the correct boot CPU in the boot
to 128 or 256, although it does not have to be power of 2).
default: 4096
-
+
CONFIG_MTD_UBI_BEB_LIMIT
This option specifies the maximum bad physical eraseblocks UBI
expects on the MTD device (per 1024 eraseblocks). If the
DECLARE_GLOBAL_DATA_PTR;
-void __ft_board_setup(void *blob, bd_t *bd)
+int __ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
-void ft_board_setup(void *blob, bd_t *bd) \
+int ft_board_setup(void *blob, bd_t *bd)
__attribute__((weak, alias("__ft_board_setup")));
void ft_cpu_setup(void *blob, bd_t *bd)
* Note: aliases in the dts are required for this
*/
fdt_fixup_ethernet(blob);
+
+ return 0;
}
#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */
DECLARE_GLOBAL_DATA_PTR;
-void __ft_board_setup(void *blob, bd_t *bd)
+int __ft_board_setup(void *blob, bd_t *bd)
{
int rc;
int i;
printf("Unable to update property EBC mappings, err=%s\n",
fdt_strerror(rc));
}
+
+ return 0;
}
-void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
+int ft_board_setup(void *blob, bd_t *bd)
+ __attribute__((weak, alias("__ft_board_setup")));
/*
* Fixup all PCIe nodes by setting the device_type property
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t * bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
#endif /* !defined(CONFIG_ARCHES) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-extern void __ft_board_setup(void *blob, bd_t *bd);
+extern int __ft_board_setup(void *blob, bd_t *bd);
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
__ft_board_setup(blob, bd);
fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
"disabled", sizeof("disabled"), 1);
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
*/
#include <common.h>
+#include <errno.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/ppc4xx.h>
* On NAND-booting sequoia, we need to patch the chips select numbers
* in the dtb (CS0 - NAND, CS3 - NOR)
*/
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int rc;
int len;
prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
if (prop == NULL) {
printf("Unable to update NOR chip select for NAND booting\n");
- return;
+ return -FDT_ERR_NOTFOUND;
}
reg = (u32 *)&prop->data[0];
reg[0] = 3;
rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
if (rc) {
- printf("Unable to update property NOR mappings, err=%s\n",
- fdt_strerror(rc));
- return;
+ printf("Unable to update property NOR mappings\n");
+ return rc;
}
/* And now configure NAND chip select to 0 instead of 3 */
prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
if (prop == NULL) {
printf("Unable to update NDFC chip select for NAND booting\n");
- return;
+ return len;
}
reg = (u32 *)&prop->data[0];
reg[0] = 0;
rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
if (rc) {
- printf("Unable to update property NDFC mappings, err=%s\n",
- fdt_strerror(rc));
- return;
+ printf("Unable to update property NDFC mapping\n");
+ return rc;
}
+
+ return 0;
}
#endif /* CONFIG_SYS_RAMBOOT */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_blob_update(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
uint8_t enetaddr[6];
fdt_find_and_setprop(blob, "/fec", "local-mac-address",
enetaddr, 6, 1);
}
+
+ return 0;
}
#endif
#ifdef CONFIG_USB_HOST_ETHER
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
uint8_t enetaddr[6];
fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address",
enetaddr, 6, 1);
}
+
+ return 0;
}
static void generate_mac_addr(uint8_t *enetaddr)
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif /* defined(CONFIG_PCI) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int rc;
fdt_strerror(rc));
}
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int rc;
fdt_strerror(rc));
}
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int rc;
printf("err=%s\n", fdt_strerror(rc));
}
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
/*
{ "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
};
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#endif
fdt_fixup_dr_usb(blob, bd);
+
+ return 0;
}
#endif
{ "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
};
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
printf("\nRemove sim from hwconfig and reset\n");
}
}
+
+ return 0;
}
#endif
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_del_sec(blob, 1);
else if (cpu->soc_ver == SVR_C292)
fdt_del_sec(blob, 2);
+
+ return 0;
}
#endif
}
}
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
cds_pci_fixup(blob);
#endif
+
+ return 0;
}
#endif
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
u8 flash_read8(void *addr)
}
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
u8 flash_read8(void *addr)
#endif
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ return 0;
}
#endif
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
fdt_fixup_esdhc(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
#else /* CONFIG_SPL_BUILD */
do_fixup_by_path(fdt, path, "status", disabled, sizeof(disabled), 1);
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
#endif
fdt_fixup_dr_usb(blob, bd);
fdt_tsec1_fixup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
#endif /* CONFIG_HARD_SPI */
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
"peripheral", sizeof("peripheral"), 1);
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
#endif
}
}
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_pci_setup(blob, bd);
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_tsec_fixup(blob, bd);
ft_pci_fixup(blob, bd);
ft_pcie_fixup(blob, bd);
#endif
+
+ return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
fdt_fixup_esdhc(blob, bd);
+
+ return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
#endif
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int node, tmp[2];
const char *path;
}
#endif
}
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int node, tmp[2];
const char *path;
}
#endif
}
+
+ return 0;
}
#endif
#endif /* CONFIG_PCI */
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
#endif /* CONFIG_PCI */
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_SYS_UCC_RMII_MODE)
int nodeoff, off, err;
fdt_board_fixup_esdhc(blob, bd);
fdt_board_fixup_qe_uart(blob, bd);
fdt_board_fixup_qe_usb(blob, bd);
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int off;
u64 *tmp;
- u32 *addrcells;
+ int addrcells;
ft_cpu_setup(blob, bd);
* which is defined by the "reg" property in the soc node.
*/
off = fdt_path_offset(blob, "/soc8641");
- addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
+ addrcells = fdt_address_cells(blob, 0);
tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
if (tmp) {
u64 addr;
- if (addrcells && (*addrcells == 1))
+
+ if (addrcells == 1)
addr = *(u32 *)tmp;
else
addr = *tmp;
"in u-boot. This means your .dts might "
"be old.\n");
}
+
+ return 0;
}
#endif
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_del_flexcan(blob);
fdt_disable_uart1(blob);
}
+
+ return 0;
}
#endif
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
/* Update the WM8776 node's clock frequency property */
ft_codec_setup(blob, "wlf,wm8776");
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#endif
fdt_fixup_fman_ethernet(blob);
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
extern void ft_pci_board_setup(void *blob);
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
const char *soc_usb_compat = "fsl-usb2-dr";
int err, usb1_off, usb2_off;
int off = fdt_node_offset_by_compatible(blob, -1,
soc_elbc_compat);
if (off < 0) {
- printf("WARNING: could not find compatible node"
- " %s: %s.\n", soc_elbc_compat,
- fdt_strerror(off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_elbc_compat);
+ return off;
}
err = fdt_del_node(blob, off);
if (err < 0) {
- printf("WARNING: could not remove %s: %s.\n",
- soc_elbc_compat, fdt_strerror(err));
+ printf("WARNING: could not remove %s\n",
+ soc_elbc_compat);
+ return err;
}
- return;
+ return 0;
}
#endif
/* Delete USB2 node as it is muxed with eLBC */
usb1_off = fdt_node_offset_by_compatible(blob, -1,
soc_usb_compat);
if (usb1_off < 0) {
- printf("WARNING: could not find compatible node"
- " %s: %s.\n", soc_usb_compat,
- fdt_strerror(usb1_off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_usb_compat);
+ return usb1_off;
}
usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
soc_usb_compat);
if (usb2_off < 0) {
- printf("WARNING: could not find compatible node"
- " %s: %s.\n", soc_usb_compat,
- fdt_strerror(usb2_off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_usb_compat);
+ return usb2_off;
}
err = fdt_del_node(blob, usb2_off);
- if (err < 0)
- printf("WARNING: could not remove %s: %s.\n",
- soc_usb_compat, fdt_strerror(err));
+ if (err < 0) {
+ printf("WARNING: could not remove %s\n", soc_usb_compat);
+ return err;
+ }
+
+ return 0;
}
+
#endif
#endif
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
int off = fdt_node_offset_by_compatible(blob, -1,
soc_elbc_compat);
if (off < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- soc_elbc_compat,
- fdt_strerror(off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_elbc_compat);
+ return off;
}
err = fdt_del_node(blob, off);
if (err < 0) {
- printf("WARNING: could not remove %s: %s.\n",
- soc_elbc_compat, fdt_strerror(err));
+ printf("WARNING: could not remove %s\n",
+ soc_elbc_compat);
+ return err;
}
- return;
+ return 0;
}
#endif
usb1_off = fdt_node_offset_by_compatible(blob, -1,
soc_usb_compat);
if (usb1_off < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- soc_usb_compat,
- fdt_strerror(usb1_off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_usb_compat);
+ return usb1_off;
}
usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
soc_usb_compat);
if (usb2_off < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- soc_usb_compat,
- fdt_strerror(usb2_off));
- return;
+ printf("WARNING: could not find compatible node %s\n",
+ soc_usb_compat);
+ return usb2_off;
}
err = fdt_del_node(blob, usb2_off);
if (err < 0) {
- printf("WARNING: could not remove %s: %s.\n",
- soc_usb_compat, fdt_strerror(err));
+ printf("WARNING: could not remove %s\n", soc_usb_compat);
+ return err;
}
+ return 0;
}
#endif
#endif
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_board_fixup_qe_pins(blob);
#endif
fdt_fixup_dr_usb(blob, bd);
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_HAS_FSL_DR_USB
fdt_fixup_dr_usb(blob, bd);
#endif
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
+
+ return 0;
}
#endif
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
#endif
+
+ return 0;
}
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
void qixis_dump_switch(void)
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
#endif
+
+ return 0;
}
#ifdef CONFIG_DEEP_SLEEP
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_liodn(blob);
fdt_fixup_dr_usb(blob, bd);
+
+ return 0;
}
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
/*
return 0;
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ return 0;
}
/*
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t * bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
* - board (full model from EEPROM)
* - peripherals removed from DTB if not loaded on board (per EEPROM config)
*/
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
struct ventana_board_info *info = &ventana_info;
struct ventana_eeprom_config *cfg;
if (getenv("fdt_noauto")) {
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
- return;
+ return 0;
}
/* Update partition nodes using info from mtdparts env var */
if (!model) {
puts("invalid board info: Leaving FDT fully enabled\n");
- return;
+ return 0;
}
printf(" Adjusting FDT per EEPROM for %s...\n", model);
*/
if (getenv("fdt_noconfig")) {
puts(" Skiping periperhal config (fdt_noconfig defined)\n");
- return;
+ return 0;
}
cfg = econfig;
while (cfg->name) {
}
cfg++;
}
+
+ return 0;
}
#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
extern void __ft_board_setup(void *blob, bd_t *bd);
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
__ft_board_setup(blob, bd);
fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
"disabled", sizeof("disabled"), 1);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
fdt_fixup_esdhc(blob, bd);
+
+ return 0;
}
#endif
}
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#endif
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *fdt, bd_t *bd)
+int ft_board_setup(void *fdt, bd_t *bd)
{
static const char disabled[] = "disabled";
u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
if (!(reg & PWRDOM_STAT_EMMC))
do_fixup_by_compat(fdt, "calxeda,hb-sdhci", "status",
disabled, sizeof(disabled), 1);
+
+ return 0;
}
#endif
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int phy_addr = CONFIG_PHY_ADDR;
char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0";
#endif
/* fix up the phy address */
do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int phy_addr = CONFIG_PHY_ADDR;
char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0";
#endif
/* fix up the phy address */
do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup (void *blob, bd_t * bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
fdt_fixup_memory (blob, (u64) bd->bi_memstart, (u64) bd->bi_memsize);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
fdt_fixup_fman_ethernet(blob);
fdt_fixup_fman_mac_addresses(blob);
#endif
+
+ return 0;
}
#if defined(CONFIG_POST)
#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
u32 val[4];
int rc;
if (rc)
printf("Unable to update property NOR mapping, err=%s\n",
fdt_strerror(rc));
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
+
+ return 0;
}
#endif
}
}
-void ft_board_setup (void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
ft_blob_update (blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
};
#endif
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
u32 val[8];
int rc, i = 0;
if (rc)
printf("Unable to update flash reg property, err=%s\n",
fdt_strerror(rc));
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t * bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
msg_clk->get_clock_rate.body.resp.rate_hz);
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
/*
* For now, we simply always add the simplefb DT node. Later, we
* node exists for the "real" graphics driver.
*/
lcd_dt_simplefb_add_node(blob);
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_FSL_PCI_INIT
FT_FSL_PCI_SETUP;
#endif
+
+ return 0;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup (void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
FT_FSL_PCI_SETUP;
+
+ return 0;
}
#endif
#endif /* CONFIG_BOARD_EARLY_INIT_R */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
u32 val[12];
int rc, i = 0;
if (rc)
printf("Unable to update localbus ranges, err=%s\n",
fdt_strerror(rc));
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
+
+ return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int lpae;
char *env;
}
}
}
+
+ return 0;
}
void ft_board_setup_ex(void *blob, bd_t *bd)
#endif /* CONFIG_VIDEO_SM501 */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#if defined(CONFIG_VIDEO)
fdt_add_edid(blob, "smi,sm501", edid_buf);
#endif
+
+ return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif /* CONFIG_PCI */
+
+ return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_blob_update(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
/* bring in eMMC dsr settings */
do_fixup_by_path_u32(blob,
"/soc/aips-bus@02100000/usdhc@02198000",
"dsr", tqma6_emmc_dsr, 2);
tqma6_bb_ft_board_setup(blob, bd);
+
+ return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+
+ return 0;
}
#endif
gd->irq_sp = gd->start_addr_sp;
# endif
#else
-# if defined(CONFIG_PPC) || defined(CONFIG_MIPS)
+# ifdef CONFIG_PPC
ulong *s;
# endif
s = (ulong *) gd->start_addr_sp;
*s = 0; /* Terminate back chain */
*++s = 0; /* NULL return address */
-# elif defined(CONFIG_MIPS)
- /* Clear initial stack frame */
- s = (ulong *) gd->start_addr_sp;
- *s-- = 0;
- *s-- = 0;
- gd->start_addr_sp = (ulong) s;
# endif /* Architecture specific code */
return 0;
}
#ifdef CONFIG_OF_BOARD_SETUP
/* Call the board-specific fixup routine */
- else if (strncmp(argv[1], "boa", 3) == 0)
- ft_board_setup(working_fdt, gd->bd);
+ else if (strncmp(argv[1], "boa", 3) == 0) {
+ int err = ft_board_setup(working_fdt, gd->bd);
+
+ if (err) {
+ printf("Failed to update board information in FDT: %s\n",
+ fdt_strerror(err));
+ return CMD_RET_FAILURE;
+ }
+ }
+#endif
+#ifdef CONFIG_OF_SYSTEM_SETUP
+ /* Call the board-specific fixup routine */
+ else if (strncmp(argv[1], "sys", 3) == 0) {
+ int err = ft_system_setup(working_fdt, gd->bd);
+
+ if (err) {
+ printf("Failed to add system information to FDT: %s\n",
+ fdt_strerror(err));
+ return CMD_RET_FAILURE;
+ }
+ }
#endif
/* Create a chosen node */
else if (strncmp(argv[1], "cho", 3) == 0) {
"addr [-c] <addr> [<length>] - Set the [control] fdt location to <addr>\n"
#ifdef CONFIG_OF_BOARD_SETUP
"fdt boardsetup - Do board-specific set up\n"
+#endif
+#ifdef CONFIG_OF_SYSTEM_SETUP
+ "fdt systemsetup - Do system-specific set up\n"
#endif
"fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr> and make it active\n"
"fdt resize - Resize fdt to size + padding to 4k addr\n"
#include <fdt_support.h>
#include <exports.h>
-/*
- * Get cells len in bytes
- * if #NNNN-cells property is 2 then len is 8
- * otherwise len is 4
- */
-static int get_cells_len(const void *fdt, const char *nr_cells_name)
-{
- const fdt32_t *cell;
-
- cell = fdt_getprop(fdt, 0, nr_cells_name, NULL);
- if (cell && fdt32_to_cpu(*cell) == 2)
- return 8;
-
- return 4;
-}
-
/**
* fdt_getprop_u32_default_node - Return a node's property or a default
*
}
/**
- * fdt_find_or_add_subnode - find or possibly add a subnode of a given node
+ * fdt_find_or_add_subnode() - find or possibly add a subnode of a given node
+ *
* @fdt: pointer to the device tree blob
* @parentoffset: structure block offset of a node
* @name: name of the subnode to locate
* fdt_subnode_offset() finds a subnode of the node with a given name.
* If the subnode does not exist, it will be created.
*/
-static int fdt_find_or_add_subnode(void *fdt, int parentoffset,
- const char *name)
+int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name)
{
int offset;
return err;
}
- is_u64 = (get_cells_len(fdt, "#address-cells") == 8);
+ is_u64 = (fdt_address_cells(fdt, 0) == 2);
err = fdt_setprop_uxx(fdt, nodeoffset, "linux,initrd-start",
(uint64_t)initrd_start, is_u64);
/*
* fdt_pack_reg - pack address and size array into the "reg"-suitable stream
*/
-static int fdt_pack_reg(const void *fdt, void *buf, uint64_t *address,
- uint64_t *size, int n)
+static int fdt_pack_reg(const void *fdt, void *buf, u64 *address, u64 *size,
+ int n)
{
int i;
- int address_len = get_cells_len(fdt, "#address-cells");
- int size_len = get_cells_len(fdt, "#size-cells");
+ int address_len = fdt_address_cells(fdt, 0);
+ int size_len = fdt_size_cells(fdt, 0);
char *p = buf;
for (i = 0; i < n; i++) {
- if (address_len == 8)
+ if (address_len == 2)
*(fdt64_t *)p = cpu_to_fdt64(address[i]);
else
*(fdt32_t *)p = cpu_to_fdt32(address[i]);
p += address_len;
- if (size_len == 8)
+ if (size_len == 2)
*(fdt64_t *)p = cpu_to_fdt64(size[i]);
else
*(fdt32_t *)p = cpu_to_fdt32(size[i]);
{
const fdt32_t *prop;
- if (addrc) {
- prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL);
- if (prop)
- *addrc = be32_to_cpup(prop);
- else
- *addrc = 2;
- }
+ if (addrc)
+ *addrc = fdt_address_cells(blob, parentoffset);
if (sizec) {
prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL);
u32 naddr;
const fdt32_t *prop;
- prop = fdt_getprop(fdt, node, "#address-cells", &size);
- if (prop && size == 4)
- naddr = be32_to_cpup(prop);
- else
- naddr = 2;
+ naddr = fdt_address_cells(fdt, node);
prop = fdt_getprop(fdt, node, "ranges", &size);
{
ulong *initrd_start = &images->initrd_start;
ulong *initrd_end = &images->initrd_end;
- int ret;
+ int ret = -EPERM;
+ int fdt_ret;
if (fdt_chosen(blob) < 0) {
- puts("ERROR: /chosen node create failed");
- puts(" - must RESET the board to recover.\n");
- return -1;
+ printf("ERROR: /chosen node create failed\n");
+ goto err;
}
if (arch_fixup_fdt(blob) < 0) {
- puts("ERROR: arch specific fdt fixup failed");
- return -1;
+ printf("ERROR: arch-specific fdt fixup failed\n");
+ goto err;
+ }
+ if (IMAGE_OF_BOARD_SETUP) {
+ fdt_ret = ft_board_setup(blob, gd->bd);
+ if (fdt_ret) {
+ printf("ERROR: board-specific fdt fixup failed: %s\n",
+ fdt_strerror(fdt_ret));
+ goto err;
+ }
+ }
+ if (IMAGE_OF_SYSTEM_SETUP) {
+ if (ft_system_setup(blob, gd->bd)) {
+ printf("ERROR: system-specific fdt fixup failed: %s\n",
+ fdt_strerror(fdt_ret));
+ goto err;
+ }
}
- if (IMAGE_OF_BOARD_SETUP)
- ft_board_setup(blob, gd->bd);
fdt_fixup_ethernet(blob);
/* Delete the old LMB reservation */
ret = fdt_shrink_to_minimum(blob);
if (ret < 0)
- return ret;
+ goto err;
of_size = ret;
if (*initrd_start && *initrd_end) {
fdt_initrd(blob, *initrd_start, *initrd_end);
if (!ft_verify_fdt(blob))
- return -1;
+ goto err;
#if defined(CONFIG_SOC_KEYSTONE)
if (IMAGE_OF_BOARD_SETUP)
#endif
return 0;
+err:
+ printf(" - must RESET the board to recover.\n\n");
+
+ return ret;
}
int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
#endif
-void ft_board_setup(void *blob, bd_t *bd);
+int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * Add board-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_BOARD_SETUP is defined
+ *
+ * @param blob FDT blob to update
+ * @param bd_t Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_board_setup(void *blob, bd_t *bd);
+
/*
* The keystone2 SOC requires all 32 bit aliased addresses to be converted
* to their 36 physical format. This has to happen after all fdt nodes
void ft_cpu_setup(void *blob, bd_t *bd);
void ft_pci_setup(void *blob, bd_t *bd);
+/**
+ * Add system-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_SYSTEM_SETUP is defined
+ *
+ * @param blob FDT blob to update
+ * @param bd_t Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_system_setup(void *blob, bd_t *bd);
+
void set_working_fdt_addr(void *addr);
int fdt_shrink_to_minimum(void *blob);
int fdt_increase_size(void *fdt, int add_len);
* @param blob FDT blob
* @param node node to examine
* @param prop_name name of property to find
- * @param ptrp returns pointer to region, or NULL if no address
- * @param size returns size of region
- * @return 0 if ok, -1 on error (propery not found)
+ * @param basep Returns base address of region
+ * @param size Returns size of region
+ * @return 0 if ok, -1 on error (property not found)
*/
-int fdtdec_decode_region(const void *blob, int node,
- const char *prop_name, void **ptrp, size_t *size);
+int fdtdec_decode_region(const void *blob, int node, const char *prop_name,
+ fdt_addr_t *basep, fdt_size_t *sizep);
+
+enum fmap_compress_t {
+ FMAP_COMPRESS_NONE,
+ FMAP_COMPRESS_LZO,
+};
+
+enum fmap_hash_t {
+ FMAP_HASH_NONE,
+ FMAP_HASH_SHA1,
+ FMAP_HASH_SHA256,
+};
/* A flash map entry, containing an offset and length */
struct fmap_entry {
uint32_t offset;
uint32_t length;
+ uint32_t used; /* Number of bytes used in region */
+ enum fmap_compress_t compress_algo; /* Compression type */
+ enum fmap_hash_t hash_algo; /* Hash algorithm */
+ const uint8_t *hash; /* Hash value */
+ int hash_size; /* Hash size */
};
/**
*/
int fdtdec_pci_get_bdf(const void *fdt, int node, int *bdf);
+/**
+ * Decode a named region within a memory bank of a given type.
+ *
+ * This function handles selection of a memory region. The region is
+ * specified as an offset/size within a particular type of memory.
+ *
+ * The properties used are:
+ *
+ * <mem_type>-memory<suffix> for the name of the memory bank
+ * <mem_type>-offset<suffix> for the offset in that bank
+ *
+ * The property value must have an offset and a size. The function checks
+ * that the region is entirely within the memory bank.5
+ *
+ * @param blob FDT blob
+ * @param node Node containing the properties (-1 for /config)
+ * @param mem_type Type of memory to use, which is a name, such as
+ * "u-boot" or "kernel".
+ * @param suffix String to append to the memory/offset
+ * property names
+ * @param basep Returns base of region
+ * @param sizep Returns size of region
+ * @return 0 if OK, -ive on error
+ */
+int fdtdec_decode_memory_region(const void *blob, int node,
+ const char *mem_type, const char *suffix,
+ fdt_addr_t *basep, fdt_size_t *sizep);
#endif
# define IMAGE_OF_BOARD_SETUP 0
#endif
+#ifdef CONFIG_OF_SYSTEM_SETUP
+# define IMAGE_OF_SYSTEM_SETUP 1
+#else
+# define IMAGE_OF_SYSTEM_SETUP 0
+#endif
+
/*
* Operating System Codes
*/
return (char *)nodep;
}
-int fdtdec_decode_region(const void *blob, int node,
- const char *prop_name, void **ptrp, size_t *size)
+int fdtdec_decode_region(const void *blob, int node, const char *prop_name,
+ fdt_addr_t *basep, fdt_size_t *sizep)
{
const fdt_addr_t *cell;
int len;
- debug("%s: %s\n", __func__, prop_name);
+ debug("%s: %s: %s\n", __func__, fdt_get_name(blob, node, NULL),
+ prop_name);
cell = fdt_getprop(blob, node, prop_name, &len);
- if (!cell || (len != sizeof(fdt_addr_t) * 2))
+ if (!cell || (len < sizeof(fdt_addr_t) * 2)) {
+ debug("cell=%p, len=%d\n", cell, len);
return -1;
+ }
+
+ *basep = fdt_addr_to_cpu(*cell);
+ *sizep = fdt_size_to_cpu(cell[1]);
+ debug("%s: base=%08lx, size=%lx\n", __func__, (ulong)*basep,
+ (ulong)*sizep);
- *ptrp = map_sysmem(fdt_addr_to_cpu(*cell), *size);
- *size = fdt_size_to_cpu(cell[1]);
- debug("%s: size=%zx\n", __func__, *size);
return 0;
}
int fdtdec_read_fmap_entry(const void *blob, int node, const char *name,
struct fmap_entry *entry)
{
+ const char *prop;
u32 reg[2];
if (fdtdec_get_int_array(blob, node, "reg", reg, 2)) {
}
entry->offset = reg[0];
entry->length = reg[1];
+ entry->used = fdtdec_get_int(blob, node, "used", entry->length);
+ prop = fdt_getprop(blob, node, "compress", NULL);
+ entry->compress_algo = prop && !strcmp(prop, "lzo") ?
+ FMAP_COMPRESS_LZO : FMAP_COMPRESS_NONE;
+ prop = fdt_getprop(blob, node, "hash", &entry->hash_size);
+ entry->hash_algo = prop ? FMAP_HASH_SHA256 : FMAP_HASH_NONE;
+ entry->hash = (uint8_t *)prop;
return 0;
}
return 0;
}
+
+int fdtdec_decode_memory_region(const void *blob, int config_node,
+ const char *mem_type, const char *suffix,
+ fdt_addr_t *basep, fdt_size_t *sizep)
+{
+ char prop_name[50];
+ const char *mem;
+ fdt_size_t size, offset_size;
+ fdt_addr_t base, offset;
+ int node;
+
+ if (config_node == -1) {
+ config_node = fdt_path_offset(blob, "/config");
+ if (config_node < 0) {
+ debug("%s: Cannot find /config node\n", __func__);
+ return -ENOENT;
+ }
+ }
+ if (!suffix)
+ suffix = "";
+
+ snprintf(prop_name, sizeof(prop_name), "%s-memory%s", mem_type,
+ suffix);
+ mem = fdt_getprop(blob, config_node, prop_name, NULL);
+ if (!mem) {
+ debug("%s: No memory type for '%s', using /memory\n", __func__,
+ prop_name);
+ mem = "/memory";
+ }
+
+ node = fdt_path_offset(blob, mem);
+ if (node < 0) {
+ debug("%s: Failed to find node '%s': %s\n", __func__, mem,
+ fdt_strerror(node));
+ return -ENOENT;
+ }
+
+ /*
+ * Not strictly correct - the memory may have multiple banks. We just
+ * use the first
+ */
+ if (fdtdec_decode_region(blob, node, "reg", &base, &size)) {
+ debug("%s: Failed to decode memory region %s\n", __func__,
+ mem);
+ return -EINVAL;
+ }
+
+ snprintf(prop_name, sizeof(prop_name), "%s-offset%s", mem_type,
+ suffix);
+ if (fdtdec_decode_region(blob, config_node, prop_name, &offset,
+ &offset_size)) {
+ debug("%s: Failed to decode memory region '%s'\n", __func__,
+ prop_name);
+ return -EINVAL;
+ }
+
+ *basep = base + offset;
+ *sizep = offset_size;
+
+ return 0;
+}
#endif
projects / karo-tx-uboot.git / commitdiff