Since we use CONFIG_SYS_GENERIC_BOARD on x86, we don't need this anymore.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
#ifndef _INIT_HELPERS_H_
#define _INIT_HELPERS_H_
-int display_banner(void);
-int display_dram_config(void);
-int init_baudrate_f(void);
int calculate_relocation_address(void);
int init_cache_f_r(void);
-
-int set_reloc_flag_r(void);
-int mem_malloc_init_r(void);
int init_bd_struct_r(void);
-int flash_init_r(void);
-int status_led_set_r(void);
-int set_load_addr_r(void);
int init_func_spi(void);
int find_fdt(void);
int prepare_fdt(void);
+++ /dev/null
-/*
- * (C) Copyright 2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _INIT_WRAPPERS_H_
-#define _INIT_WRAPPERS_H_
-
-int serial_initialize_r(void);
-int env_relocate_r(void);
-int pci_init_r(void);
-int jumptable_init_r(void);
-int pcmcia_init_r(void);
-int kgdb_init_r(void);
-int enable_interrupts_r(void);
-int eth_initialize_r(void);
-int reset_phy_r(void);
-int ide_init_r(void);
-int scsi_init_r(void);
-int doc_init_r(void);
-int bb_miiphy_init_r(void);
-int post_run_r(void);
-
-#endif /* !_INIT_WRAPPERS_H_ */
#ifndef _U_BOOT_H_
#define _U_BOOT_H_ 1
-#include <config.h>
-#include <compiler.h>
-
-#ifdef CONFIG_SYS_GENERIC_BOARD
/* Use the generic board which requires a unified bd_info */
#include <asm-generic/u-boot.h>
-#else
-
-#ifndef __ASSEMBLY__
-
-typedef struct bd_info {
- unsigned long bi_memstart; /* start of DRAM memory */
- phys_size_t bi_memsize; /* size of DRAM memory in bytes */
- unsigned long bi_flashstart; /* start of FLASH memory */
- unsigned long bi_flashsize; /* size of FLASH memory */
- unsigned long bi_flashoffset; /* reserved area for startup monitor */
- unsigned long bi_sramstart; /* start of SRAM memory */
- unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
- unsigned long bi_intfreq; /* Internal Freq, in MHz */
- unsigned long bi_busfreq; /* Bus Freq, in MHz */
- unsigned int bi_baudrate; /* Console Baudrate */
- unsigned long bi_boot_params; /* where this board expects params */
- struct /* RAM configuration */
- {
- ulong start;
- ulong size;
- }bi_dram[CONFIG_NR_DRAM_BANKS];
-} bd_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* !CONFIG_SYS_GENERIC_BOARD */
/* For image.h:image_check_target_arch() */
#define IH_ARCH_DEFAULT IH_ARCH_I386
LIB = $(obj)lib$(ARCH).o
-ifeq ($(CONFIG_SYS_GENERIC_BOARD),)
-COBJS-y += board.o
-endif
-
COBJS-y += bootm.o
COBJS-y += cmd_boot.o
COBJS-y += gcc.o
COBJS-y += init_helpers.o
-COBJS-y += init_wrappers.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o
COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o
+++ /dev/null
-/*
- * (C) Copyright 2008-2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <fdtdec.h>
-#include <watchdog.h>
-#include <stdio_dev.h>
-#include <asm/u-boot-x86.h>
-#include <asm/relocate.h>
-#include <asm/processor.h>
-#include <asm/sections.h>
-
-#include <asm/init_helpers.h>
-#include <asm/init_wrappers.h>
-
-/*
- * Breath some life into the board...
- *
- * Getting the board up and running is a three-stage process:
- * 1) Execute from Flash, SDRAM Uninitialised
- * At this point, there is a limited amount of non-SDRAM memory
- * (typically the CPU cache, but can also be SRAM or even a buffer of
- * of some peripheral). This limited memory is used to hold:
- * - The initial copy of the Global Data Structure
- * - A temporary stack
- * - A temporary x86 Global Descriptor Table
- * - The pre-console buffer (if enabled)
- *
- * The following is performed during this phase of execution:
- * - Core low-level CPU initialisation
- * - Console initialisation
- * - SDRAM initialisation
- *
- * 2) Execute from Flash, SDRAM Initialised
- * At this point we copy Global Data from the initial non-SDRAM
- * memory and set up the permanent stack in SDRAM. The CPU cache is no
- * longer being used as temporary memory, so we can now fully enable
- * it.
- *
- * The following is performed during this phase of execution:
- * - Create final stack in SDRAM
- * - Copy Global Data from temporary memory to SDRAM
- * - Enabling of CPU cache(s),
- * - Copying of U-Boot code and data from Flash to RAM
- * - Clearing of the BSS
- * - ELF relocation adjustments
- *
- * 3) Execute from SDRAM
- * The following is performed during this phase of execution:
- * - All remaining initialisation
- */
-
-/*
- * The requirements for any new initalization function is simple: it is
- * a function with no parameters which returns an integer return code,
- * where 0 means "continue" and != 0 means "fatal error, hang the system"
- */
-typedef int (init_fnc_t) (void);
-
-/*
- * init_sequence_f is the list of init functions which are run when U-Boot
- * is executing from Flash with a limited 'C' environment. The following
- * limitations must be considered when implementing an '_f' function:
- * - 'static' variables are read-only
- * - Global Data (gd->xxx) is read/write
- * - Stack space is limited
- *
- * The '_f' sequence must, as a minimum, initialise SDRAM. It _should_
- * also initialise the console (to provide early debug output)
- */
-init_fnc_t *init_sequence_f[] = {
- cpu_init_f,
- board_early_init_f,
-#ifdef CONFIG_OF_CONTROL
- find_fdt,
- fdtdec_check_fdt,
-#endif
- env_init,
- init_baudrate_f,
- serial_init,
- console_init_f,
-#ifdef CONFIG_OF_CONTROL
- prepare_fdt,
-#endif
- dram_init_f,
- calculate_relocation_address,
-
- NULL,
-};
-
-/*
- * init_sequence_f_r is the list of init functions which are run when
- * U-Boot is executing from Flash with a semi-limited 'C' environment.
- * The following limitations must be considered when implementing an
- * '_f_r' function:
- * - 'static' variables are read-only
- * - Global Data (gd->xxx) is read/write
- *
- * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if
- * supported). It _should_, if possible, copy global data to RAM and
- * initialise the CPU caches (to speed up the relocation process)
- */
-init_fnc_t *init_sequence_f_r[] = {
- init_cache_f_r,
- copy_uboot_to_ram,
- copy_fdt_to_ram,
- clear_bss,
- do_elf_reloc_fixups,
-
- NULL,
-};
-
-/*
- * init_sequence_r is the list of init functions which are run when U-Boot
- * is executing from RAM with a full 'C' environment. There are no longer
- * any limitations which must be considered when implementing an '_r'
- * function, (i.e.'static' variables are read/write)
- *
- * If not already done, the '_r' sequence must copy global data to RAM and
- * (should) initialise the CPU caches.
- */
-init_fnc_t *init_sequence_r[] = {
- set_reloc_flag_r,
- init_bd_struct_r,
- mem_malloc_init_r,
- cpu_init_r,
- board_early_init_r,
- dram_init,
- interrupt_init,
- timer_init,
- display_banner,
- display_dram_config,
- serial_initialize_r,
-#ifndef CONFIG_SYS_NO_FLASH
- flash_init_r,
-#endif
-#ifdef CONFIG_PCI
- pci_init_r,
-#endif
-#ifdef CONFIG_SPI
- init_func_spi,
-#endif
- env_relocate_r,
- stdio_init,
- jumptable_init_r,
- console_init_r,
-#ifdef CONFIG_MISC_INIT_R
- misc_init_r,
-#endif
-#if defined(CONFIG_CMD_KGDB)
- kgdb_init_r,
-#endif
- enable_interrupts_r,
-#ifdef CONFIG_STATUS_LED
- status_led_set_r,
-#endif
- set_load_addr_r,
-#if defined(CONFIG_CMD_IDE)
- ide_init_r,
-#endif
-#if defined(CONFIG_CMD_SCSI)
- scsi_init_r,
-#endif
-#if defined(CONFIG_CMD_DOC)
- doc_init_r,
-#endif
-#ifdef CONFIG_BITBANGMII
- bb_miiphy_init_r,
-#endif
-#if defined(CONFIG_CMD_NET)
- eth_initialize_r,
-#ifdef CONFIG_RESET_PHY_R
- reset_phy_r,
-#endif
-#endif
-#ifdef CONFIG_LAST_STAGE_INIT
- last_stage_init,
-#endif
- NULL,
-};
-
-static void do_init_loop(init_fnc_t **init_fnc_ptr)
-{
- for (; *init_fnc_ptr; ++init_fnc_ptr) {
- WATCHDOG_RESET();
- if ((*init_fnc_ptr)() != 0)
- hang();
- }
-}
-
-void board_init_f(ulong boot_flags)
-{
- gd->fdt_blob = gd->new_fdt = NULL;
- gd->flags = boot_flags;
-
- do_init_loop(init_sequence_f);
-
- /*
- * SDRAM and console are now initialised. The final stack can now
- * be setup in SDRAM. Code execution will continue in Flash, but
- * with the stack in SDRAM and Global Data in temporary memory
- * (CPU cache)
- */
- board_init_f_r_trampoline(gd->start_addr_sp);
-
- /* NOTREACHED - board_init_f_r_trampoline() does not return */
- while (1)
- ;
-}
-
-void board_init_f_r(void)
-{
- do_init_loop(init_sequence_f_r);
-
- /*
- * U-Boot has been copied into SDRAM, the BSS has been cleared etc.
- * Transfer execution from Flash to RAM by calculating the address
- * of the in-RAM copy of board_init_r() and calling it
- */
- (board_init_r + gd->reloc_off)(gd, gd->relocaddr);
-
- /* NOTREACHED - board_init_r() does not return */
- while (1)
- ;
-}
-
-void board_init_r(gd_t *id, ulong dest_addr)
-{
- do_init_loop(init_sequence_r);
-
- /* main_loop() can return to retry autoboot, if so just run it again. */
- for (;;)
- main_loop();
-
- /* NOTREACHED - no way out of command loop except booting */
-}
* MA 02111-1307 USA
*/
#include <common.h>
-#include <command.h>
#include <fdtdec.h>
-#include <stdio_dev.h>
-#include <version.h>
-#include <malloc.h>
-#include <net.h>
-#include <ide.h>
-#include <serial.h>
#include <spi.h>
-#include <status_led.h>
-#include <asm/processor.h>
#include <asm/sections.h>
-#include <asm/u-boot-x86.h>
-#include <linux/compiler.h>
-
-#include <asm/init_helpers.h>
DECLARE_GLOBAL_DATA_PTR;
-/************************************************************************
- * Init Utilities *
- ************************************************************************
- * Some of this code should be moved into the core functions,
- * or dropped completely,
- * but let's get it working (again) first...
- */
-
-int display_banner(void)
-{
- printf("\n\n%s\n\n", version_string);
-
- return 0;
-}
-
-int display_dram_config(void)
-{
- int i;
-
- puts("DRAM Configuration:\n");
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
- print_size(gd->bd->bi_dram[i].size, "\n");
- }
-
- return 0;
-}
-
-int init_baudrate_f(void)
-{
- gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
- return 0;
-}
-
/* Get the top of usable RAM */
__weak ulong board_get_usable_ram_top(ulong total_size)
{
return init_cache();
}
-int set_reloc_flag_r(void)
-{
- gd->flags = GD_FLG_RELOC;
-
- return 0;
-}
-
-int mem_malloc_init_r(void)
-{
- mem_malloc_init(((gd->relocaddr - CONFIG_SYS_MALLOC_LEN)+3)&~3,
- CONFIG_SYS_MALLOC_LEN);
-
- return 0;
-}
-
bd_t bd_data;
int init_bd_struct_r(void)
return 0;
}
-#ifndef CONFIG_SYS_NO_FLASH
-int flash_init_r(void)
-{
- ulong size;
-
- puts("Flash: ");
-
- /* configure available FLASH banks */
- size = flash_init();
-
- print_size(size, "\n");
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_STATUS_LED
-int status_led_set_r(void)
-{
- status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-
- return 0;
-}
-#endif
-
-int set_load_addr_r(void)
-{
- /* Initialize from environment */
- load_addr = getenv_ulong("loadaddr", 16, load_addr);
-
- return 0;
-}
-
int init_func_spi(void)
{
puts("SPI: ");
return 0;
}
-#ifdef CONFIG_OF_CONTROL
int find_fdt(void)
{
#ifdef CONFIG_OF_EMBED
return 0;
}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <environment.h>
-#include <fdtdec.h>
-#include <serial.h>
-#include <kgdb.h>
-#include <scsi.h>
-#include <post.h>
-#include <miiphy.h>
-
-#include <asm/init_wrappers.h>
-
-int serial_initialize_r(void)
-{
- serial_initialize();
-
- return 0;
-}
-
-/*
- * Tell if it's OK to load the environment early in boot.
- *
- * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see
- * if this is OK (defaulting to saying it's not OK).
- *
- * NOTE: Loading the environment early can be a bad idea if security is
- * important, since no verification is done on the environment.
- *
- * @return 0 if environment should not be loaded, !=0 if it is ok to load
- */
-static int should_load_env(void)
-{
-#ifdef CONFIG_OF_CONTROL
- return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 0);
-#elif defined CONFIG_DELAY_ENVIRONMENT
- return 0;
-#else
- return 1;
-#endif
-}
-
-int env_relocate_r(void)
-{
- /* initialize environment */
- if (should_load_env())
- env_relocate();
- else
- set_default_env(NULL);
-
- return 0;
-}
-
-
-int pci_init_r(void)
-{
- /* Do pci configuration */
- pci_init();
-
- return 0;
-}
-
-int jumptable_init_r(void)
-{
- jumptable_init();
-
- return 0;
-}
-
-int pcmcia_init_r(void)
-{
- puts("PCMCIA:");
- pcmcia_init();
-
- return 0;
-}
-
-int kgdb_init_r(void)
-{
- puts("KGDB: ");
- kgdb_init();
-
- return 0;
-}
-
-int enable_interrupts_r(void)
-{
- /* enable exceptions */
- enable_interrupts();
-
- return 0;
-}
-
-int eth_initialize_r(void)
-{
- puts("Net: ");
- eth_initialize(gd->bd);
-
- return 0;
-}
-
-int reset_phy_r(void)
-{
-#ifdef DEBUG
- puts("Reset Ethernet PHY\n");
-#endif
- reset_phy();
-
- return 0;
-}
-
-int ide_init_r(void)
-{
- puts("IDE: ");
- ide_init();
-
- return 0;
-}
-
-int scsi_init_r(void)
-{
- puts("SCSI: ");
- scsi_init();
-
- return 0;
-}
-
-#ifdef CONFIG_BITBANGMII
-int bb_miiphy_init_r(void)
-{
- bb_miiphy_init();
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_POST
-int post_run_r(void)
-{
- post_run(NULL, POST_RAM | post_bootmode_get(0));
-
- return 0;
-}
-#endif
projects / karo-tx-uboot.git / commitdiff