From: Tom Rini <trini@ti.com>
Date: Tue, 25 Feb 2014 17:44:13 +0000 (-0500)
Subject: Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
X-Git-Tag: v2014.04-rc2~74
X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=a7e8c15f71456d55ccb27f843862af03a00e0957

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

With this, fixup a trivial build error of get_effective_memsize needing
to be updated in the new board/freescale/p1010rdb/spl.c

Signed-off-by: Tom Rini <trini@ti.com>
---

a7e8c15f71456d55ccb27f843862af03a00e0957
diff --cc board/freescale/p1010rdb/spl.c
index 0000000000,8fed26d693..11bd9cfccc
mode 000000,100644..100644
--- a/board/freescale/p1010rdb/spl.c
+++ b/board/freescale/p1010rdb/spl.c
@@@ -1,0 -1,108 +1,108 @@@
+ /* Copyright 2013 Freescale Semiconductor, Inc.
+  *
+  * SPDX-License-Identifier:    GPL-2.0+
+  */
+ 
+ #include <common.h>
+ #include <ns16550.h>
+ #include <malloc.h>
+ #include <mmc.h>
+ #include <nand.h>
+ #include <i2c.h>
+ #include <fsl_esdhc.h>
+ #include <spi_flash.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
 -ulong get_effective_memsize(void)
++phys_size_t get_effective_memsize(void)
+ {
+ 	return CONFIG_SYS_L2_SIZE;
+ }
+ 
+ void board_init_f(ulong bootflag)
+ {
+ 	u32 plat_ratio;
+ 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ 	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+ 
+ 	console_init_f();
+ 
+ 	/* Clock configuration to access CPLD using IFC(GPCM) */
+ 	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+ 
+ #ifdef CONFIG_P1010RDB_PB
+ 	setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
+ #endif
+ 
+ 	/* initialize selected port with appropriate baud rate */
+ 	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ 	plat_ratio >>= 1;
+ 	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+ 
+ 	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ 		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
+ 
+ #ifdef CONFIG_SPL_MMC_BOOT
+ 	puts("\nSD boot...\n");
+ #elif defined(CONFIG_SPL_SPI_BOOT)
+ 	puts("\nSPI Flash boot...\n");
+ #endif
+ 	/* copy code to RAM and jump to it - this should not return */
+ 	/* NOTE - code has to be copied out of NAND buffer before
+ 	 * other blocks can be read.
+ 	*/
+ 	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+ }
+ 
+ void board_init_r(gd_t *gd, ulong dest_addr)
+ {
+ 	/* Pointer is writable since we allocated a register for it */
+ 	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
+ 	bd_t *bd;
+ 
+ 	memset(gd, 0, sizeof(gd_t));
+ 	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
+ 	memset(bd, 0, sizeof(bd_t));
+ 	gd->bd = bd;
+ 	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
+ 	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
+ 
+ 	probecpu();
+ 	get_clocks();
+ 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+ 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+ 
+ #ifndef CONFIG_SPL_NAND_BOOT
+ 	env_init();
+ #endif
+ #ifdef CONFIG_SPL_MMC_BOOT
+ 	mmc_initialize(bd);
+ #endif
+ 
+ 	/* relocate environment function pointers etc. */
+ #ifdef CONFIG_SPL_NAND_BOOT
+ 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ 			    (uchar *)CONFIG_ENV_ADDR);
+ 			    gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
+ 	gd->env_valid = 1;
+ #else
+ 	env_relocate();
+ #endif
+ 
+ 	i2c_init_all();
+ 
+ 	gd->ram_size = initdram(0);
+ #ifdef CONFIG_SPL_NAND_BOOT
+ 	puts("\nTertiary program loader running in sram...");
+ #else
+ 	puts("\nSecond program loader running in sram...");
+ #endif
+ 
+ #ifdef CONFIG_SPL_MMC_BOOT
+ 	mmc_boot();
+ #elif defined(CONFIG_SPL_SPI_BOOT)
+ 	spi_boot();
+ #elif defined(CONFIG_SPL_NAND_BOOT)
+ 	nand_boot();
+ #endif
+ }