]> git.kernelconcepts.de Git - karo-tx-uboot.git/history - arch
spi: fix mxs_spi_slave structure allocation to clear memory
[karo-tx-uboot.git] / arch /
2012-09-01 Troy Kiskyimx-common/cmd_bmode.c: add imx bmode (bootmode) command
2012-09-01 Troy Kiskyiomux: move IOMUX_GPR13_xxx defines
2012-09-01 Benoît Thébaudeaumx35: Remove duplicate GPIO3_BASE_ADDR
2012-09-01 Benoît Thébaudeaumx5: cosmetic: Clean up lowlevel_init
2012-09-01 Benoît Thébaudeaumx5/6 timer: Round up tick_to_time() value
2012-09-01 Benoît Thébaudeaumx3: Fix typo on IPU_CONF_CSI_EN
2012-09-01 Benoît Thébaudeaumx35: Fix typo on EDIO
2012-09-01 Benoît Thébaudeaumx5: Enable dcache
2012-09-01 Benoît Thébaudeaumx25: Enable dcache
2012-09-01 tremrtc: add support of mx27 rtc
2012-09-01 Marek VasutMX28: Shuffle around the power management code
2012-09-01 Marek VasutMX28: Drop the cp15 reconfiguration from SPL
2012-09-01 Otavio Salvadormxs: Convert sys_proto.h prefixes to 'mxs'
2012-09-01 Otavio Salvadormxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
2012-09-01 Otavio Salvadormxs: Remove not required include of iomux-mx28.h
2012-09-01 Otavio Salvadormxs: Remove not required explicit iomux-mx28.h include
2012-09-01 Łukasz Majewskiarm:exynos: Enable data cache at exynos based processors.
2012-09-01 Donghwa Leevideo: support exynos pwm backlight driver
2012-09-01 Donghwa Leevideo: exynos fb driver supports display port feature
2012-09-01 Donghwa Leevideo: support exynos display port drivers
2012-09-01 Donghwa LeeEXYNOS5: add display port base address
2012-09-01 Donghwa LeeEXYNOS5: support display port phy control function
2012-09-01 Donghwa LeeEXYNOS5: support display system register control
2012-09-01 Donghwa LeeEXYNOS5: support exynos5 lcd clock control
2012-09-01 Donghwa Leevideo: support exynos fimd driver for various exynos...
2012-09-01 Jaehoon ChungARM: EXYNOS: fixed compiler warning message
2012-09-01 Zhong Hongboarm/s5pxx: Fix get_timer_masked to get the time.
2012-09-01 Rajeshwari ShindeEXYNOS5 : Modify pinnumx settings as per Exynos5250...
2012-09-01 Rajeshwari ShindeEXYNOS5: CLOCK: Add BPLL support
2012-09-01 Rajeshwari ShindeEXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250...
2012-09-01 Rajeshwari ShindeExynos5: DDR3: Add DDR3 memory setup for Exynos5250...
2012-09-01 Rajeshwari ShindeEXYNOS5: CLOCK: define additional clock registers for...
2012-09-01 Rajeshwari ShindeARCH: SPL: Add parametric board initializer
2012-09-01 Tetsuyuki Kobayashiarm: bugfix: save_boot_params_default accesses uninital...
2012-09-01 Allen Martintegra20: Remove armv4t build flags
2012-09-01 Allen Martinarm: enable libgcc build for SPL
2012-09-01 Allen Martintegra20: enable SPL for tegra20 boards
2012-09-01 Allen Martintegra20: move SDRAM param save to later in boot
2012-09-01 Allen MartinARM: add tegra20 support to arm720t
2012-09-01 Allen MartinARM: Fix arm720t SPL build
2012-09-01 Allen Martintegra20: move tegra20 SoC code to arch/arm/cpu/tegra20...
2012-09-01 Allen Martintegra20: rename tegra2 -> tegra20
2012-09-01 Stephen WarrenARM: add basic support for the Broadcom BCM2835 SoC
2012-09-01 Stephen WarrenARM: arm1176: enable instruction cache in arch_cpu_init()
2012-09-01 Mathieu J. Poiriersnowball: Adding board specific cache cleanup routine
2012-09-01 Mathieu J. Poirierarmv7: Adding cpu specific cache managmenent
2012-09-01 Mathieu J. Poirieru8500: Enabling power to MMC device on AB8500 V2
2012-09-01 Mathieu J. Poirieru8500: Moving processor-specific functions to cpu area.
2012-09-01 Mathieu J. Poiriersnowball: applying power to LAN and GBF controllers
2012-09-01 Mathieu J. Poiriersnowball: Moving to ux500.v2 addess scheme for PRCMU...
2012-09-01 Mathieu J. Poiriersnowball: Adding CPU clock initialisation
2012-09-01 Mathieu J. Poiriersnowball: Adding architecture dependent initialisation
2012-09-01 Mathieu J. Poirieru8500: Moving prcmu to cpu directory
2012-09-01 Mathieu J. Poiriersnowball: Add support for ux500 based snowball board
2012-09-01 Tom Rinidavinci, c6x: Always use C version of reset code
2012-09-01 Satyanarayana, Sandhyaam33xx evm: Update secure_emif_sdram_config during...
2012-09-01 Sughosh Ganuda8xx/hawkboard: Add support for ohci host controller
2012-09-01 Tom Riniarmv7: Make lowlevel_init.S's lowlevel_init do ABI...
2012-09-01 Tom Riniomap4/5/am33xx: Make lowlevel_init available to all...
2012-09-01 Tom Riniam33xx: Add support, update omap3 McSPI driver
2012-09-01 Tom Riniam33xx: Correct MMC1, remove MMC2 support
2012-09-01 Stathis Voukelatosi.MX28: bug fixes in PMU configuration code
2012-09-01 Marek VasutMX28: Move the u-boot.bd info CPUDIR/SOCDIR
2012-09-01 Otavio Salvadormxs: rename mx28.c to mxs.c as it is common to i.MX233...
2012-09-01 Otavio Salvadormxs: Clarify why we poweroff in case of brownout in...
2012-09-01 Otavio Salvadormxs: Reowork SPL to use 'mxs' prefix for methods
2012-09-01 Otavio Salvadormxs: prefix register structs with 'mxs' prefix
2012-09-01 Otavio Salvadormxs: prefix register acessor macros with 'mxs' prefix
2012-09-01 Otavio Salvadormxs: reorganize source directory for easy sharing of...
2012-09-01 Otavio SalvadorMX28: use a clear name for DDR2 initialization
2012-09-01 Otavio SalvadorMX28: extend print_cpuinfo() to use chip information
2012-09-01 Otavio Salvadorimx: Use a clear identification of an unidentified...
2012-09-01 Markus HubigEnable the EMAC clock in at91_macb_hw_init().
2012-09-01 Bo Shenarm : Atmel : add at91sam9x5ek board support
2012-09-01 Laurence WithersDaVinci DA8xx: fix set_cpu_clk_info()
2012-09-01 Laurence WithersDaVinci DA8xx: replace magic number for DDR speed
2012-09-01 Laurence WithersDaVinci DA850: UART2 clock ID comes from ASYNC3
2012-09-01 Laurence WithersDaVinci DA8xx: tidy up clock ID definition
2012-09-01 Marek Vasutdm: Move OMAP GPIO driver to drivers/gpio/
2012-09-01 Tom Riniam33xx: Rework pinmux functions
2012-09-01 Tom Riniam33xx evm: Add CONFIG_CMD_EEPROM and related
2012-09-01 Tom Riniam33xx: Add support for TI AM335x StarterKit EVM
2012-09-01 Tom Riniam33xx: Remove board/ti/am335x/evm.c
2012-09-01 Tom Riniam33xx: Add DDR3 (Micron MT41J128M16JT-125) timings...
2012-09-01 Tom Riniam33xx: Rework config_ddr to make DDR3 support easier.
2012-09-01 Tom Riniam33xx: Move some variables in emif4.c, mark them static.
2012-09-01 Tom Riniam33xx: Correct and clean up ddr_regs struct
2012-09-01 Tom Riniam33xx: Do not touch 'ratio1' fields
2012-09-01 Tom Riniam33xx: Rework config_io_ctrl slightly
2012-09-01 Tom Riniam33xx: Use emif_regs struct for storing initialization...
2012-09-01 Tom Riniam33xx: Turn a number of 'int' functions to 'void'
2012-09-01 Tom Riniam33xx: Document what we're doing with ddrctrl->ddrckectrl
2012-09-01 Vaibhav Bediaam335x: ddr_defs: Update EMIF parameters
2012-09-01 Tom Riniam33xx: Clean up unused DDR defines, prefix more with...
2012-09-01 Tom Riniam33xx: Move the call to ddr_pll_config, make it take...
2012-09-01 Tom Riniam33xx: Pass to config_ddr the type of memory that...
2012-09-01 Tom Riniam33xx: Make config_cmd_ctrl / config_ddr_data take...
2012-09-01 Tom Riniam33xx: Rework DDR2 EMIF initalization slightly
2012-09-01 Tom Riniam33xx: Bugfix to config_sdram()
2012-09-01 Tom Riniam33xx: Remove extra check in enable_ddr_clocks
next