karo: tx6: add support for TXUL-5014
[karo-tx-uboot.git] / board / karo / tx6 / tx6ul.c
2020-05-05 Lothar Waßmannkaro: tx6: add support for TXUL-5014
2019-05-09 Lothar Waßmannkaro: tx6: configure all relevant PMIC registers
2019-05-09 Lothar Waßmannkaro: tx6: make pixelclock overridable via DT or 'video...
2019-01-30 Lothar Waßmannkaro: txul: fix LDO4 output voltage
2018-10-17 Lothar Waßmannfix TXUL module name
2018-02-08 Lothar Waßmannkaro: txul: add support for TX-Tester-V5 baseboard
2018-02-08 Lothar Waßmannkaro: txul: read second mac address from fuses
2018-01-08 Lothar Waßmannkaro: txul: remove i2c_gpio_pads
2018-01-08 Lothar Waßmannkaro: tx6: change drive strength of Ethernet related...
2018-01-08 Lothar Waßmannkaro: tx6: indentation cleanup
2017-10-25 Lothar Waßmannboard: karo: add support for using Linux simple-panel... KARO-TX6-2017-10-27
2017-07-21 Lothar Waßmannkaro: tx6: add support for Ka-Ro TX6UL-8013 KARO-TX6ULL-2017-07-07
2017-04-03 Lothar Waßmannkaro: add support for TX6UL-5012
2016-07-11 Lothar Waßmannkaro: tx6ul: configure some more PMIC regs and disable... KARO-TX-2016-07-11
2016-07-11 Lothar Waßmannkaro: tx6: configure PMIC to a consistent state upon...
2016-07-05 Lothar Waßmannkaro: tx6ul: fix wrong board name in U-Boot messages KARO-TX-2016-07-05
2016-07-04 Lothar WaßmannMerge branch 'tx6-bugfix'
2016-07-01 Lothar Waßmannkaro: tx6ul: enable soft i2c driver and 'i2c' command
2016-07-01 Lothar Waßmannkaro: tx6ul: rework I2C recovery routine to be more...
2016-07-01 Lothar Waßmannkaro: tx6ul: change local 'tx6_' prefixes to 'tx6ul'
2016-07-01 Lothar Waßmannkaro: tx6ul: configure JTAG_* pads for JTAG function...
2016-07-01 Lothar Waßmannkaro: tx6: configure all pads with explicit pad_ctl...
2016-06-13 Lothar WaßmannMerge branch 'tx28-update' into tx28-bugfix
2016-04-26 Lothar Waßmannkaro: tx6ul: disable the PMIC for '_noenv' U-Boot KARO-TX6-2016-04-26
2016-04-26 Lothar Waßmannkaro: tx6ul: make board string dependent on cpurev
2016-04-19 Lothar Waßmannkaro: tx6: replace open coded interpretation of cpurev...
2016-02-18 Lothar WaßmannMerge branch 'tx53-update-2016-02-03' into karo-tx6 KARO-TX6-2016-03-10
2016-02-18 Lothar WaßmannMerge branch 'tx28-update-2016-02-03' into karo-tx6
2016-02-18 Lothar WaßmannMerge branch 'tx6-update-2016-02-03' into karo-tx6
2016-02-18 Lothar Waßmannkaro: tx6ul: fix bogus GPIO numbers
2016-02-18 Lothar Waßmannkaro: tx6ul: add pad settings for FT5x06 and USB pads...
2016-02-18 Lothar Waßmannkaro: tx6ul: add support for TX6UL Mainboard (v1)
2016-02-18 Lothar Waßmannkaro: tx6ul: defer mmc probing until environment has...
2016-02-18 Lothar Waßmannkaro: tx6ul: proper initialize second FEC if available
2016-02-18 Lothar Waßmannkaro: tx6ul: reorder functions to better follow which...
2016-02-18 Lothar Waßmannkaro: tx6: check ctrlc before returning error code...
2016-02-18 Lothar Waßmannkaro: tx6ul: make show_activity() bail out on GPIO...
2016-02-18 Lothar Waßmannkaro: tx6ul: indentation fixes
2016-02-04 Lothar Waßmannkaro: remove redundant cmap entry in panel_info
2015-11-26 Lothar WaßmannARM: imx6ul: add support for mxsfb on i.MX6UL
2015-11-26 Lothar Waßmannkaro: tx6: rework PMIC code to allow for different...
2015-11-26 Lothar Waßmannkaro: tx6ul: enable soft_i2c for PMIC access
2015-11-26 Lothar Waßmannkaro: tx6ul: fix max. dimensions of framebuffer
2015-10-26 Lothar WaßmannMerge branch 'tx48-devel' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx28-devel' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx28-bugfix' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx51-bugfix' into karo-devel
2015-10-26 Lothar Waßmannkaro: fdt: prevent duplicate call of fdt_fixup_ethernet()
2015-10-20 Lothar Waßmannkaro: tx6ul: disable PMIC init
2015-10-20 Lothar Waßmannkaro: tx6: add TXUL support