karo-tx-uboot.git
9 years agousb: dfu: make nand upload working
Bo Shen [Thu, 7 Nov 2013 06:29:41 +0000 (14:29 +0800)]
usb: dfu: make nand upload working

Nowhere pass a value to len, which always 0, make no transfer which
cause uploading failed.

This patch make nand upload working. However it needs enough malloc
buffer to store read data, that means the buffer at least equal to
the upload partition size, or else it doesn't work.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
9 years agousb, g_dnl: make iSerialNumber board configurable
Heiko Schocher [Mon, 4 Nov 2013 13:05:01 +0000 (14:05 +0100)]
usb, g_dnl: make iSerialNumber board configurable

add the possibility to set the iSerialNumber board specific.
Default value for iSerialNumber is 0x0. This value can
changed board specific through the new function
g_dnl_set_serialnumber() which must be called from the
board specific function g_dnl_bind_fixup().

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
9 years agousb: dfu: correct dfu buffer inited value
Bo Shen [Wed, 16 Oct 2013 09:26:38 +0000 (17:26 +0800)]
usb: dfu: correct dfu buffer inited value

After dfu buffer is initialized, the buffer should be all available,
while not 0. Initialize its value to min(dfu_buf_size, dfu->r_left).

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
9 years agousb: dfu: decrease dfu->r_left along with the transfer
Bo Shen [Wed, 16 Oct 2013 09:26:37 +0000 (17:26 +0800)]
usb: dfu: decrease dfu->r_left along with the transfer

The value of dfu->r_left need decrease along with the transfer

Signed-off-by: Bo Shen <voice.shen@atmel.com>
9 years agousb: ohci-hcd: submit_common_msg: report actual_length properly
Mateusz Kulikowski [Wed, 23 Oct 2013 18:26:27 +0000 (20:26 +0200)]
usb: ohci-hcd: submit_common_msg: report actual_length properly

submit_common_msg should report amount of data passed from/to device.
Instead, it always returned size requested by Host.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
9 years agousb: ums: add ums exit feature by ctrl+c or by detach usb cable
Przemyslaw Marczak [Wed, 23 Oct 2013 12:30:46 +0000 (14:30 +0200)]
usb: ums: add ums exit feature by ctrl+c or by detach usb cable

This patch allows exiting from UMS mode to u-boot prompt
by detaching usb cable or by pressing ctrl+c.

Add new config: CONFIG_USB_CABLE_CHECK. If defined then board
file should provide function: usb_cable_connected() (include/usb.h)
that return 1 if cable is connected and 0 otherwise.

Changes v2:
- add a note to the README

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Marek Vasut <marex@denx.de>
9 years agousb: ums: move ums code from trats to Samsung common directory
Przemyslaw Marczak [Wed, 23 Oct 2013 12:30:45 +0000 (14:30 +0200)]
usb: ums: move ums code from trats to Samsung common directory

UMS init was implemented in trats board file but mostly it comprises
common code. Due to that it has been moved to common/ums.c to avoid
code duplication in the future.

Changes:
- move ums initialization code from trats to common/ums.c
- remove unused CONFIG_USB_GADGET_MASS_STORAGE from trats.h

Changes v2:
- move this patch at the top of code cleanups patches

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Minkyu Kang <mk7.kang@samsung.com>
9 years agousb: ums: fix disk capacity miscalculation and code cleanup
Przemyslaw Marczak [Wed, 23 Oct 2013 12:30:44 +0000 (14:30 +0200)]
usb: ums: fix disk capacity miscalculation and code cleanup

This patch prevents:
- ums disk capacity miscalculation because of integer overflow

Changes v2:
- Prevents passing zero size disk capacity to ums gadget driver
- Change function ums_get_capacity() to ums_disk_init() and do ums disk
  initialization before gadget init
- Remove unnecessary code from mass storage driver

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Marek Vasut <marex@denx.de>
9 years agousb: ums: allows using every mmc device with ums.
Przemyslaw Marczak [Wed, 23 Oct 2013 12:30:43 +0000 (14:30 +0200)]
usb: ums: allows using every mmc device with ums.

Before this change ums command only allowed use of mmc 0.
Now this argument can be set.

Changes:
- remove mmc device number checking because it is always positive number
- remove printing "no such device" - it is done by find_mmc_device()

Change-Id: I767e45151ad515c7bef19e6c13087374f5e23c11
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Marek Vasut <marex@denx.de>
9 years agousb: ums: code refactoring to improve reusability on other boards.
Przemyslaw Marczak [Wed, 23 Oct 2013 12:30:42 +0000 (14:30 +0200)]
usb: ums: code refactoring to improve reusability on other boards.

This patch introduces some cleanups to ums code. Changes:

ums common:
- introduce UMS_START_SECTOR and UMS_NUM_SECTORS as defined in
  usb_mass_storage.h both default values as 0 if board config
  doesn't define them

common cleanup changes:
- change name of struct "ums_board_info" to "ums"
- "ums_device" fields are moved to struct ums and "dev_num" is removed
- change function name: board_ums_init to ums_init
- remove "extern" prefixes from usb_mass_storage.h

cmd_usb_mass_storage:
- change error() to printf() if need to print info message
- change return values to command_ret_t type at ums command code
- add command usage string

Changes v2:
ums common:
- always returns number of read/write sectors
- coding style clean-up
ums gadget:
- calculate amount of read/write from device returned value.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
9 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-coldfire
Tom Rini [Wed, 6 Nov 2013 21:18:25 +0000 (16:18 -0500)]
Merge branch 'master' of git://denx.de/git/u-boot-coldfire

9 years agoMerge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze
Tom Rini [Wed, 6 Nov 2013 21:11:34 +0000 (16:11 -0500)]
Merge branch 'fpga' of git://denx.de/git/u-boot-microblaze

9 years agoColdFire: fix some typoes for CF platform
jason [Wed, 6 Nov 2013 14:59:08 +0000 (22:59 +0800)]
ColdFire: fix some typoes for CF platform

Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
9 years agocoldfire: cpu5282: increase malloc space to fix crash on start u-boot
Jens Scharsig (BuS Elektronik) [Mon, 23 Sep 2013 06:26:41 +0000 (08:26 +0200)]
coldfire: cpu5282: increase malloc space to fix crash on start u-boot

The malloc space is to small to boot, the current uboot 2013.10-rcX,
This will fix the startup problems by increasing the mallog space to 4MiB.

Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
9 years agoMakfile: fix a rule to build u-boot.sb
Masahiro Yamada [Tue, 5 Nov 2013 08:09:02 +0000 (17:09 +0900)]
Makfile: fix a rule to build u-boot.sb

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agofreescale: p1_p2_rdb_pc: rename COBJS-y to obj-y
Masahiro Yamada [Tue, 5 Nov 2013 08:03:22 +0000 (17:03 +0900)]
freescale: p1_p2_rdb_pc: rename COBJS-y to obj-y

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agofpga: Add support for gzip images with bitstreams
Michal Simek [Fri, 4 Oct 2013 08:51:01 +0000 (10:51 +0200)]
fpga: Add support for gzip images with bitstreams

Here is the set of command which has been performed
to proof this feature.

gzip < fpga.bin > fpga.bin.gz
mkimage -A arm -O u-boot -T firmware -C gzip \
-a 20000000 -n "zc702_fpga_bin" -d fpga.bin.gz fpga.bin.gz.ub

tftp 100000 fpga.bin.gz.ub
fpga loadmk 0 100000

This flow should speedup loading bitstream data
from external memory and save image footprint in non volatile
memory.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
9 years agofpga: zynqpl: Do not place bitstream below 1MB
Michal Simek [Fri, 4 Oct 2013 08:48:59 +0000 (10:48 +0200)]
fpga: zynqpl: Do not place bitstream below 1MB

DMA doesn't work when src is placed below 1MB limit.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
9 years agofpga: zynqpl: Add dcache flush support
Jagannadha Sutradharudu Teki [Fri, 20 Sep 2013 13:09:47 +0000 (18:39 +0530)]
fpga: zynqpl: Add dcache flush support

Buffers must be cache and dma aligned.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
9 years agopxe: fix handling of absolute paths
Rob Herring [Fri, 18 Oct 2013 18:04:42 +0000 (13:04 -0500)]
pxe: fix handling of absolute paths

pxelinux and syslinux differ in their handling of absolute paths in menu
files. A pxelinux path is aways prepended with the bootfile path while
syslinux allows for absolute paths. u-boot was always treating a leading
/ as an absolute path breaking some pxelinux setups. Fix this by adding
a flag to distinguish pxelinux vs. syslinux behavior.

Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoARM: versatile: convert to common timer code
Rob Herring [Fri, 4 Oct 2013 15:22:48 +0000 (10:22 -0500)]
ARM: versatile: convert to common timer code

Convert versatile to use the commmon timer code.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoARM: tegra: convert to common timer code
Rob Herring [Fri, 4 Oct 2013 15:22:47 +0000 (10:22 -0500)]
ARM: tegra: convert to common timer code

Convert tegra to use the commmon timer code.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoARM: socfpga: convert to common timer code
Rob Herring [Fri, 4 Oct 2013 15:22:46 +0000 (10:22 -0500)]
ARM: socfpga: convert to common timer code

Convert socfpga to use the commmon timer code.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoARM: vexpress: convert to common timer code
Rob Herring [Fri, 4 Oct 2013 15:22:45 +0000 (10:22 -0500)]
ARM: vexpress: convert to common timer code

Convert vexpress to use the commmon timer code.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoARM: mx25: convert to common timer code
Rob Herring [Fri, 4 Oct 2013 15:22:44 +0000 (10:22 -0500)]
ARM: mx25: convert to common timer code

Convert mx25 to use the commmon timer code.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoARM: highbank: convert to common timer code
Rob Herring [Fri, 4 Oct 2013 15:22:43 +0000 (10:22 -0500)]
ARM: highbank: convert to common timer code

Convert highbank to use the commmon timer code.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agosh: convert to common timer code
Rob Herring [Fri, 4 Oct 2013 15:22:42 +0000 (10:22 -0500)]
sh: convert to common timer code

Convert sh to use the commmon timer code. Remove reset_timer and
set_timer as they are unused on sh.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoIntroduce common timer functions
Rob Herring [Fri, 4 Oct 2013 15:22:41 +0000 (10:22 -0500)]
Introduce common timer functions

Many platforms duplicate pretty much the same timer code yet they all have
a 32-bit freerunning counter register. Create a common implementation that
minimally requires 2 or 3 defines to add timer support:

CONFIG_SYS_TIMER_RATE - Clock rate of the timer counter
CONFIG_SYS_TIMER_COUNTER - Address of 32-bit counter
CONFIG_SYS_TIMER_COUNTS_DOWN - Define if counter counts down

All functions are weak or ifdef'ed so they can still be overriden by any
platform.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoexamples: enable gc-sections option
Rob Herring [Fri, 4 Oct 2013 15:22:40 +0000 (10:22 -0500)]
examples: enable gc-sections option

This fixes building time.c when unreferenced functions are added.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoconfig: remove platform CONFIG_SYS_HZ definition part 2/2
Rob Herring [Fri, 4 Oct 2013 13:40:05 +0000 (08:40 -0500)]
config: remove platform CONFIG_SYS_HZ definition part 2/2

Remove platform CONFIG_SYS_HZ definition for configs a-z*.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoconfig: remove platform CONFIG_SYS_HZ definition part 1/2
Rob Herring [Fri, 4 Oct 2013 13:40:04 +0000 (08:40 -0500)]
config: remove platform CONFIG_SYS_HZ definition part 1/2

Remove platform CONFIG_SYS_HZ definition for configs A-Z*.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoconfig: consolidate CONFIG_SYS_HZ definition
Rob Herring [Fri, 4 Oct 2013 13:40:03 +0000 (08:40 -0500)]
config: consolidate CONFIG_SYS_HZ definition

According to the README, CONFIG_SYS_HZ must be 1000 and most platforms
follow that. In preparation to remove CONFIG_SYS_HZ from all these
platforms, provide a common definition. The platforms which use a value
other than 1000 will get build warning now. These configs are:

include/configs/M5271EVB.h:#define CONFIG_SYS_HZ                        1000000
include/configs/balloon3.h:#define      CONFIG_SYS_HZ                   3250000         /* Timer @ 3250000 Hz */
include/configs/idmr.h:#define CONFIG_SYS_HZ                    (50000000 / 64)
include/configs/mini2440.h:#define CONFIG_SYS_HZ                        1562500
include/configs/mx1ads.h:#define CONFIG_SYS_HZ                  3686400
include/configs/omap3_zoom2.h:#define CONFIG_SYS_HZ                     ((V_SCLK) / (2 << CONFIG_SYS_PTV))
include/configs/omap730p2.h:#define CONFIG_SYS_HZ                       ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
include/configs/palmld.h:#define        CONFIG_SYS_HZ                   3250000         /* Timer @ 3250000 Hz */
include/configs/palmtc.h:#define        CONFIG_SYS_HZ                   3686400         /* Timer @ 3686400 Hz */
include/configs/rsk7203.h:#define CONFIG_SYS_HZ                 (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/rsk7264.h:#define CONFIG_SYS_HZ         (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/rsk7269.h:#define CONFIG_SYS_HZ         (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/scb9328.h:#define CONFIG_SYS_HZ                 3686400      /* incrementer freq: 3.6864 MHz */
include/configs/versatile.h:#define CONFIG_SYS_HZ                       (1000000 / 256)
include/configs/zipitz2.h:#define       CONFIG_SYS_HZ                   3250000         /* Timer @ 3250000 Hz */

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
9 years agoconfig: Add a default CONFIG_SYS_PROMPT
Rob Herring [Mon, 30 Sep 2013 22:11:48 +0000 (17:11 -0500)]
config: Add a default CONFIG_SYS_PROMPT

The definitions for CONFIG_SYS_PROMPT are varied with little reason other
than to display the board name. Over half the definitions are "==> ", so
make this the default. The rest of the boards remain unchanged to avoid
breaking any external scripts expecting a certain prompt.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agoMerge branch 'master' of git://git.denx.de/u-boot-blackfin
Tom Rini [Mon, 4 Nov 2013 14:28:08 +0000 (09:28 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin

Easy to resolve conflict on the GPIO change.

Conflicts:
arch/blackfin/cpu/Makefile

Signed-off-by: Tom Rini <trini@ti.com>
9 years agoblackfin: Move machine specific gpio_port_t structure back to blackfin arch folder.
Steven Miao [Wed, 23 Oct 2013 06:44:09 +0000 (14:44 +0800)]
blackfin: Move machine specific gpio_port_t structure back to blackfin arch folder.

The gpio register mappings are different among blackfin processors.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
9 years agoblackfin: fix a warning in arch/blackfin/cpu/cpu.c
Masahiro Yamada [Mon, 21 Oct 2013 01:14:05 +0000 (10:14 +0900)]
blackfin: fix a warning in arch/blackfin/cpu/cpu.c

This commit fixes:
    cpu.c:107: warning: ‘noreturn’ function does return

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
9 years agoboard/keymile/kmp204x/Makefile: Convert to SPDX tag
Tom Rini [Fri, 1 Nov 2013 14:27:12 +0000 (10:27 -0400)]
board/keymile/kmp204x/Makefile: Convert to SPDX tag

Signed-off-by: Tom Rini <trini@ti.com>
9 years agoboard: powerpc: convert more makefiles to Kbuild style
Tom Rini [Fri, 1 Nov 2013 14:24:19 +0000 (10:24 -0400)]
board: powerpc: convert more makefiles to Kbuild style

Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: York Sun <yorksun@freescale.com>
Signed-off-by: Tom Rini <trini@ti.com>
9 years agoMakefile: convert makefiles to Kbuild style and delete grep switch
Masahiro Yamada [Mon, 21 Oct 2013 02:53:41 +0000 (11:53 +0900)]
Makefile: convert makefiles to Kbuild style and delete grep switch

We have converted all makefiles needed to build $(LIBS).

Until this commit we used to grep switch so that U-Boot style
and Kbuild style makefiles coexist.
But we do not need any more.

Goint forward, use always Kbuild style Makefile when adding
a new Makefile

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agodts, api, test: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:40 +0000 (11:53 +0900)]
dts, api, test: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agopost: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:39 +0000 (11:53 +0900)]
post: convert makefiles to Kbuild style

This commit also deletes post/rules.mk,
which in not necessary any more.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoboard: powerpc: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:38 +0000 (11:53 +0900)]
board: powerpc: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Stefan Roese <sr@denx.de>
9 years agoboard: arm: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:37 +0000 (11:53 +0900)]
board: arm: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Vipin Kumar <vipin.kumar@st.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Tom Rini <trini@ti.com>
9 years agoblackfin: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:36 +0000 (11:53 +0900)]
blackfin: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>
9 years agom68k: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:35 +0000 (11:53 +0900)]
m68k: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Jason Jin <Jason.jin@freescale.com>
9 years agox86: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:34 +0000 (11:53 +0900)]
x86: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
9 years agonios2: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:33 +0000 (11:53 +0900)]
nios2: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
9 years agonds32: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:32 +0000 (11:53 +0900)]
nds32: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Macpaul Lin <macpaul@gmail.com>
9 years agomips: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:31 +0000 (11:53 +0900)]
mips: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
9 years agomicroblaze: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:30 +0000 (11:53 +0900)]
microblaze: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>
9 years agoopenrisc: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:29 +0000 (11:53 +0900)]
openrisc: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
9 years agoavr32: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:28 +0000 (11:53 +0900)]
avr32: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
9 years agosh: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:27 +0000 (11:53 +0900)]
sh: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
9 years agosparc: convert makefiles to Kbuild style
Masahiro Yamada [Mon, 21 Oct 2013 02:53:26 +0000 (11:53 +0900)]
sparc: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
9 years agosh: Do not include start.o in lib$(CPU).o
Masahiro Yamada [Mon, 21 Oct 2013 02:53:25 +0000 (11:53 +0900)]
sh: Do not include start.o in lib$(CPU).o

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
9 years agosparc: fix a link error
Masahiro Yamada [Mon, 21 Oct 2013 02:53:24 +0000 (11:53 +0900)]
sparc: fix a link error

Before this commit, arch/sparc/lib/Makefile used
both COBJS and COBJS-y.
And it missed to add COBJS-y into OBJS.
This means bootm.o was never compiled even if
CONFIG_CMD_BOOTM=y

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
9 years agoARM: s5pc, exynos: move Samsung ARM SoC specific code under arch/arm/
Masahiro Yamada [Thu, 17 Oct 2013 11:38:56 +0000 (20:38 +0900)]
ARM: s5pc, exynos: move Samsung ARM SoC specific code under arch/arm/

This patch moves S5PC, EXYNOS specific directory entries
from the toplevel Makefile to arch/arm/cpu/armv7/Makefile
using Kbuild descending feature.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
9 years agoARM: omap: move OMAP specific code under arch/arm/
Masahiro Yamada [Thu, 17 Oct 2013 11:38:55 +0000 (20:38 +0900)]
ARM: omap: move OMAP specific code under arch/arm/

This patch moves OMAP specific directory entries
from the toplevel Makefile and spl/Makefile
to arch/arm/cpu/armv7/Makefile using Kbuild descending feature.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
9 years agoARM: tegra: move Tegra specific code under arch/arm/
Masahiro Yamada [Thu, 17 Oct 2013 11:38:54 +0000 (20:38 +0900)]
ARM: tegra: move Tegra specific code under arch/arm/

This patch moves Tegra specific directory entries
from the toplevel Makefile and spl/Makefile
to arch/arm/cpu/*/Makefile using Kbuild descending feature.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Warren <TWarren@nvidia.com>
9 years agofs: move some file system to fs/Makefile
Masahiro Yamada [Thu, 17 Oct 2013 11:38:53 +0000 (20:38 +0900)]
fs: move some file system to fs/Makefile

This commit moves some subdirectories of fs
from the toplevel Makefile to fs/Makefile
using Kbuild descending feature.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agodrivers: move some drivers to drivers/Makefile
Masahiro Yamada [Thu, 17 Oct 2013 11:38:52 +0000 (20:38 +0900)]
drivers: move some drivers to drivers/Makefile

This commit moves some drivers subdirectory entry
from the toplevel Makefile to drivers/Makefile
using Kbuild descending feature.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoMakefile: support descending down to subdirectories
Masahiro Yamada [Thu, 17 Oct 2013 11:38:51 +0000 (20:38 +0900)]
Makefile: support descending down to subdirectories

This patch tweaks scripts/Makefile.build to allow
the build system to descend into subdirectories like Kbuild.

To use this feature, use "obj-y += foo/" syntax.

Example:
    obj-$(CONFIG_FOO) += foo/

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
9 years agoboard: ti: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:35:05 +0000 (17:35 +0900)]
board: ti: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
9 years agopowerpc: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:35:04 +0000 (17:35 +0900)]
powerpc: convert makefiles to Kbuild style

Note:
arch/powerpc/cpu/mpc8260/Makefile is originally like follows:

    ---<snip>---
    START   = start.o kgdb.o
    COBJS   = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
    ---<snip>---
    COBJS-$(CONFIG_ETHER_ON_SCC) = ether_scc.o
    ---<snip>---
    $(LIB): $(OBJS)
            $(call cmd_link_o_target, $(OBJS) $(obj)kgdb.o)

The link rule `$(call cmd_link_o_target, $(OBJS) $(obj)kgdb.o)'
is weird.
kbdg.o is not included in $(OBJS) but linked into $(LIB)
and $(LIB) is not dependent on kgdb.o.
(Broken dependency tracking)

So,
    START   = start.o kgdb.o
shoud have been
    START   = start.o
    SOBJS   = kgdb.o

That is why this commit adds kgdb.o to obj-y, not to extra-y.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
9 years agosandbox: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:35:03 +0000 (17:35 +0900)]
sandbox: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agodisk: convert a makefile to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:35:02 +0000 (17:35 +0900)]
disk: convert a makefile to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agolib: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:35:01 +0000 (17:35 +0900)]
lib: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agonet: convert a makefile to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:35:00 +0000 (17:35 +0900)]
net: convert a makefile to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agocommon: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:59 +0000 (17:34 +0900)]
common: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agofs: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:58 +0000 (17:34 +0900)]
fs: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agodrivers: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:57 +0000 (17:34 +0900)]
drivers: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agodrivers: usb: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:56 +0000 (17:34 +0900)]
drivers: usb: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agodrivers: mtd: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:55 +0000 (17:34 +0900)]
drivers: mtd: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agodrivers: net: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:54 +0000 (17:34 +0900)]
drivers: net: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoARM: imx-common: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:53 +0000 (17:34 +0900)]
ARM: imx-common: convert makefiles to Kbuild style

Multiple targets are included in arch/arm/imx-common/Makefile
In order to refactor it,
we need to tweak Makefile and spl/Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoARM: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:52 +0000 (17:34 +0900)]
ARM: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoarm720t: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:51 +0000 (17:34 +0900)]
arm720t: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoarm920t: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:50 +0000 (17:34 +0900)]
arm920t: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoarm926ejs: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:49 +0000 (17:34 +0900)]
arm926ejs: convert makefiles to Kbuild style

Note1:
In arch/arm/cpu/arm926ejs/spear/Makefile
START := start.o
was changed
extra-$(CONFIG_SPL_BUILD) := start.o
because spear/start.o is only used for SPL.

Note2:
START := start.o
was missing from arch/arm/cpu/arm926ejs/mxs/Makefile.
This commit simply adds
extra-$(CONFIG_SPL_BUILD) := start.o

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoarmv7: convert makefiles to Kbuild style
Masahiro Yamada [Thu, 17 Oct 2013 08:34:48 +0000 (17:34 +0900)]
armv7: convert makefiles to Kbuild style

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
9 years agoMakefile: prepare for using Kbuild-style Makefile
Masahiro Yamada [Thu, 17 Oct 2013 08:34:47 +0000 (17:34 +0900)]
Makefile: prepare for using Kbuild-style Makefile

Every makefile in sub directories has common lines
at the top and the bottom.
This commit pushes the common parts into script/Makefile.build.

Going forward sub-makefiles only need to describe this part:

    COBJS := ...
    COBJS += ...
    SOBJS := ...

But using obj-y is preferable to prepare for switching to Kbuild.

The conventional (non-Kbuild) Makefile style is still supported.
This is achieved by greping the Makefile before entering into it.
U-Boot conventional sub makefiles always include some other makefiles.
So the build system searches a line beginning with "include" keyword
in the makefile in order to distinguish which style it is.
If the Makefile include a "include" line, we assume it is a conventional
U-Boot style. Otherwise, it is treated as a Kbuild-style makefile.

With this tweak, we can switch sub-makefiles
from U-Boot style to Kbuild style little by little.

obj-y := foo/
syntax (descending into the sub directory) is not supportd yet.
It will be implemented in the upcomming commit.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
9 years agonand_util.c: Correct licensing
Tom Rini [Thu, 31 Oct 2013 13:24:00 +0000 (09:24 -0400)]
nand_util.c: Correct licensing

Prior to SPDX licensing this file was GPL-2.0 with Freescale granting
rights for "or later" for their contributed code.  We incorrectly moved
this file to GPL-2.0+, so correct it to GPL-2.0.  In addition we cannot
easily denote in the file where or what code is "or later", so just set
that aside for now and the file as a whole is GPL-2.0 regardless.

Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Tom Rini <trini@ti.com>
9 years agopowerpc/esdhc: Add 3.3v voltage support in esdhc capacity register
Haijun.Zhang [Thu, 31 Oct 2013 01:38:19 +0000 (09:38 +0800)]
powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register

T4240QDS eSDHC host capabilities reigster should have VS33 bit define.
Add quirk CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 to deal with capacity
missing

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agoesdhc: memset mmc struct before putting into use
Haijun.Zhang [Thu, 31 Oct 2013 01:38:18 +0000 (09:38 +0800)]
esdhc: memset mmc struct before putting into use

struct mmc should be clear to all '0' after malloc to avoid
unexpect variable value.

Like mmc->has_init = xxx.
In this case mmcinfo will believe the card had been initialized before
and skip the initialization.

Test on P5040 and T4240,
Error Log:

=> mmcinfo
Device: FSL_SDHC
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0 Bytes
Bus Width: 0-bit
=>

Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Xie Shaohui-B21989 <B21989@freescale.com>
Tested-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agoPowerpc/esdhc: Add simple description of esdhc register
Haijun.Zhang [Wed, 30 Oct 2013 03:37:55 +0000 (11:37 +0800)]
Powerpc/esdhc: Add simple description of esdhc register

Add some descriptions for esdhc register for easily using.

Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agopowerpc/esdhc: Map register for eSDHC Host Controller V3.0
Haijun.Zhang [Wed, 30 Oct 2013 03:37:54 +0000 (11:37 +0800)]
powerpc/esdhc: Map register for eSDHC Host Controller V3.0

eSDHC host controller has new register to support SD Spec 3.0.
And the according host controller version was Freescale eSDHC
Version 3.0.

Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agoDWMMC: SMDK5420: Disable SMU for eMMC
Rajeshwari Shinde [Tue, 29 Oct 2013 07:23:13 +0000 (12:53 +0530)]
DWMMC: SMDK5420: Disable SMU for eMMC

SMDK5420 has a new Security Management Unit added
for dwmmc driver, hence, configuring the control
registers to support booting via eMMC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agommc: sdhci: Avoid commands errors by simple timeout adaptation.
Przemyslaw Marczak [Tue, 8 Oct 2013 16:12:09 +0000 (18:12 +0200)]
mmc: sdhci: Avoid commands errors by simple timeout adaptation.

Old command timeout value was too small and it caused I/O errors which
led to uncompleted read/write/erase operations and filesystem errors.
Timeout adaptation fixes this issue.

Changes in sdhci_send_command() function:
- change timeout variable to static
- increase default command timeout to 100 ms
- add definition of max command timeout value,
  which can be redefined in each board config file
- wait for card ready state for max defined time
  if it doesn't exceed defined maximum or return COMM_ERR

Once successfully increased timeout value will be used in next function
call. This fix was tested on Goni, Trats, Trats2 boards by testing UMS
on MMC storage.

Changes v2:
- move global variable cmd_timeout into function sdhci_send_command()
- change condition "==" to ">=" when comparing time with timeout
- print information about timeout increasing and card busy timeout

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agommc: dw_mmc: change the callback function name.
Jaehoon Chung [Sun, 6 Oct 2013 09:59:31 +0000 (18:59 +0900)]
mmc: dw_mmc: change the callback function name.

To prevent the confusion, use the get_mmc_clk() instead of mmc_clk().
get_mmc_clk() is more exactly name.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agommc: Fix erase_grp_size for partitioned card
Oliver Metz [Tue, 1 Oct 2013 18:32:07 +0000 (20:32 +0200)]
mmc: Fix erase_grp_size for partitioned card

EXT_CSD_ERASE_GROUP_DEF is lost every time after a reset or
 power off. Set it if device has enhanced partitions.

Signed-off-by: Oliver Metz <oliver@freetz.org>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
9 years agoMerge branch 'master' of git://git.denx.de/u-boot-video
Tom Rini [Wed, 30 Oct 2013 12:36:48 +0000 (08:36 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-video

9 years agovideo, formike: change tag/val write
Heiko Schocher [Tue, 22 Oct 2013 09:06:24 +0000 (11:06 +0200)]
video, formike: change tag/val write

write first the "tag" 8 bit value and then the "val" 8-bit
to the display.

Tested on the rut board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
9 years agovideo, cfb_console: make background and foreground color configurable
Heiko Schocher [Tue, 22 Oct 2013 09:06:06 +0000 (11:06 +0200)]
video, cfb_console: make background and foreground color configurable

make CONSOLE_BG_COL/CONSOLE_FG_COL configurable through board config file.
Clear video screen in video_init().

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
9 years agovideo: ipu_disp: Fix clock polarity logic
Fabio Estevam [Tue, 29 Oct 2013 17:46:21 +0000 (15:46 -0200)]
video: ipu_disp: Fix clock polarity logic

Currently the HDMI splash screen image quality on mx6solo does not show a
very stable image.

By comparing the IPU driver from U-boot with the one from FSL 4.1.0 BSP,
we can see that there is an inverted logic for setting the DI_GEN_POL_CLK bit.

>From FSL BSP [1] we have:

if (!sig.clk_pol)
di_gen |= DI_GEN_POLARITY_DISP_CLK;

Applying the same logic into U-boot fixes the HDMI image stability.

[1] git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/mxc/ipu3/ipu_disp.c?h=imx_3.0.35_4.1.0

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
9 years agompc85xx: introduce the kmp204x reference design support
Valentin Longchamp [Fri, 18 Oct 2013 09:47:24 +0000 (11:47 +0200)]
mpc85xx: introduce the kmp204x reference design support

This patch introduces the support for Keymile's kmp204x reference
design. This design is based on Freescale's P2040/P2041 SoC.

The peripherals used by this design are:
- DDR3 RAM with SPD support
- SPI NOR Flash as boot medium
- NAND Flash
- 2 PCIe busses (hosts 1 and 3)
- 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
- 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt
  FPGA
- 2 HW I2C busses
- last but not least, the mandatory serial port

The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb
support and was changed according to our design (that means essentially
removing what is not present on the designs and a few adaptations).

There is currently only one prototype board that is based on this design
and this patch also introduces it. The board is called kmlion1.

Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
kmp204x: update the ENV #define

The comments had to be refined as well as the total size

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
[York Sun: fix ddr.c]
Acked-by: York Sun <yorksun@freescale.com>
9 years agofsl/mpc85xx: define common serdes_clock_to_string function
Valentin Longchamp [Fri, 18 Oct 2013 09:47:23 +0000 (11:47 +0200)]
fsl/mpc85xx: define common serdes_clock_to_string function

This allows to share some common code for the boards that use a corenet
base SoC.

Two different versions of the function are available in
fsl_corenet_serdes.c and fsl_corenet2_serdes.c files.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
[York Sun: fix t1040qds.c]
Acked-by: York Sun <yorksun@freescale.com>
9 years agomtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into account
Valentin Longchamp [Fri, 18 Oct 2013 09:47:22 +0000 (11:47 +0200)]
mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into account

NAND_ECC_SOFT was the only option available while the SOFT_BCH option
may also be used.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Scott Wood <scottwood@freescale.com>
9 years agonet/fman: add a fm_enable_port function
Valentin Longchamp [Fri, 18 Oct 2013 09:47:21 +0000 (11:47 +0200)]
net/fman: add a fm_enable_port function

This can be useful if one wants to disable an interface in u-boot
because u-boot should not manage it but then later reenable it for FDT
fixing or if the kernel uses this interface.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
[York Sun: fix conflict in fm_eth.h]
Acked-by: York Sun <yorksun@freescale.com>
9 years agompc8xxx: set x2 DDR3 refresh rate if SPD config requires it
Valentin Longchamp [Fri, 18 Oct 2013 09:47:20 +0000 (11:47 +0200)]
mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it

If the DDR3 module supports industrial temperature range and requires
the x2 refresh rate for that temp range, the refresh period must be
3.9us instead of 7.8 us.

This was successfuly tested on kmp204x board with some MT41K128M16 DDR3
RAM chips (no module used, chips directly soldered on board with an SPD
EEPROM).

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
[York Sun: fix minor conflicts in fsl_ddr_dimm_params.h,
   lc_common_dimm_params.c, common_timing_params.h]
Acked-by: York Sun <yorksun@freescale.com>
9 years agompc8xxx: call i2c_set_bus_num in __get_spd
Valentin Longchamp [Fri, 18 Oct 2013 09:47:19 +0000 (11:47 +0200)]
mpc8xxx: call i2c_set_bus_num in __get_spd

This is necessary with the new I2C subystem that was introduced lately.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>