karo-tx-uboot.git
7 years agobuildman: fix README
Andreas Bießmann [Tue, 5 Nov 2013 09:37:09 +0000 (10:37 +0100)]
buildman: fix README

This is a trivial fix for c'n'p error.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Simon Glass <sjg@chromium.org>
7 years agopatman: add Commit-notes tag and section
Albert ARIBAUD [Tue, 12 Nov 2013 10:14:41 +0000 (11:14 +0100)]
patman: add Commit-notes tag and section

Sometimes a commit should have notes enclosed with it rather
than withing the cover letter -- possibly even because there
is no cover letter. Add a 'Commit-notes' tag, similar to the
'Series-notes' one; lines between this tag and the next END
line are inserted in the patch right after the '---' commit
delimiter.

Change-Id: I01e99ae125607dc6dec08f3be8a5a0b37f0a483d
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Updated README)

7 years agoMerge branch 'master' of git://git.denx.de/u-boot-mips
Tom Rini [Sun, 17 Nov 2013 01:23:22 +0000 (20:23 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-mips

7 years agofs: descend into sub directories when it is necessary
Masahiro Yamada [Mon, 11 Nov 2013 05:36:10 +0000 (14:36 +0900)]
fs: descend into sub directories when it is necessary

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoMakefile: move fs/fat/ entry to drivers/Makefile
Masahiro Yamada [Mon, 11 Nov 2013 05:36:09 +0000 (14:36 +0900)]
Makefile: move fs/fat/ entry to drivers/Makefile

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
7 years agoarm: rmobile: Do not create a symbolic link to sh timer
Masahiro Yamada [Mon, 11 Nov 2013 05:36:08 +0000 (14:36 +0900)]
arm: rmobile: Do not create a symbolic link to sh timer

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
7 years agopowerpc: mpc824x: Do not create a symbolic link to bedbug_603e.c
Masahiro Yamada [Mon, 11 Nov 2013 05:36:07 +0000 (14:36 +0900)]
powerpc: mpc824x: Do not create a symbolic link to bedbug_603e.c

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agopowerpc: mpc83xx: Do not create a symbolic link to ddr-gen2.c
Masahiro Yamada [Mon, 11 Nov 2013 05:36:06 +0000 (14:36 +0900)]
powerpc: mpc83xx: Do not create a symbolic link to ddr-gen2.c

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agopowerpc: mpc83xx: delete unused rules
Masahiro Yamada [Mon, 11 Nov 2013 05:36:05 +0000 (14:36 +0900)]
powerpc: mpc83xx: delete unused rules

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoMakefile: delete unused lines
Masahiro Yamada [Mon, 11 Nov 2013 05:36:04 +0000 (14:36 +0900)]
Makefile: delete unused lines

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agotools: Makefile: delete redundant lines
Masahiro Yamada [Mon, 11 Nov 2013 05:36:03 +0000 (14:36 +0900)]
tools: Makefile: delete redundant lines

HOSTOS is defined and exported at the top Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoconfig.mk: delete unnecessary lines
Masahiro Yamada [Mon, 11 Nov 2013 05:36:02 +0000 (14:36 +0900)]
config.mk: delete unnecessary lines

SPL_BIN is already defined in spl/Makefile
and it is used only in spl/Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoMakefile: refactor a little
Masahiro Yamada [Mon, 11 Nov 2013 05:36:01 +0000 (14:36 +0900)]
Makefile: refactor a little

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoMakefile: rename all libraries to built-in.o
Masahiro Yamada [Mon, 11 Nov 2013 05:36:00 +0000 (14:36 +0900)]
Makefile: rename all libraries to built-in.o

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agodrivers/net/npe: descend only when CONFIG_IXP4XX_NPE=y
Masahiro Yamada [Mon, 11 Nov 2013 05:35:59 +0000 (14:35 +0900)]
drivers/net/npe: descend only when CONFIG_IXP4XX_NPE=y

CONFIG_IXP4XX_NPE is defined only for CPU ixp.
It is not necessary to filter by CPU ixp.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agodrivers/net/fm: descend only when CONFIG_FMAN_ENET=y
Masahiro Yamada [Mon, 11 Nov 2013 05:35:58 +0000 (14:35 +0900)]
drivers/net/fm: descend only when CONFIG_FMAN_ENET=y

CONFIG_FMAN_ENET is defined only for CPU mpc85xx.
We do not need to filter by CPU mpc85xx.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agodrivers/qe: move the entry to drivers/Makefile
Masahiro Yamada [Mon, 11 Nov 2013 05:35:57 +0000 (14:35 +0900)]
drivers/qe: move the entry to drivers/Makefile

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agopowerpc: move mpc8xxx entry under arch/powerpc/cpu/
Masahiro Yamada [Mon, 11 Nov 2013 05:35:56 +0000 (14:35 +0900)]
powerpc: move mpc8xxx entry under arch/powerpc/cpu/

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoMakefile: merge $(LIBBOARD) into $(LIBS)
Masahiro Yamada [Mon, 11 Nov 2013 05:35:55 +0000 (14:35 +0900)]
Makefile: merge $(LIBBOARD) into $(LIBS)

We do not need to handle $(LIBBOARD) and $(LIBS) separately.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoMakefile: make directories by Makefile.build
Masahiro Yamada [Mon, 11 Nov 2013 05:35:54 +0000 (14:35 +0900)]
Makefile: make directories by Makefile.build

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agodrivers: tpm: clean up unused code
Masahiro Yamada [Mon, 11 Nov 2013 05:35:53 +0000 (14:35 +0900)]
drivers: tpm: clean up unused code

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agolib: descend into sub directories only when it is necessary
Masahiro Yamada [Mon, 11 Nov 2013 05:35:52 +0000 (14:35 +0900)]
lib: descend into sub directories only when it is necessary

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agodrivers: descend into sub directories only when it is necessary
Masahiro Yamada [Mon, 11 Nov 2013 05:35:51 +0000 (14:35 +0900)]
drivers: descend into sub directories only when it is necessary

- Descend into drivers/fpga/ only when CONFIG_FPGA=y
  - Descend into drivers/bios_emulator only when CONFIG_BIOSEMU=y

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoMakefile: specifiy an explicite object name rather than $(BOARD).o
Masahiro Yamada [Mon, 11 Nov 2013 05:35:50 +0000 (14:35 +0900)]
Makefile: specifiy an explicite object name rather than $(BOARD).o

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoMakefile: abolish COBJS, SOBJS, etc.
Masahiro Yamada [Mon, 11 Nov 2013 05:35:49 +0000 (14:35 +0900)]
Makefile: abolish COBJS, SOBJS, etc.

The support for COBJS, COBJS-y, SOBJS, SOBJS-y, GLCOBJS, GLSOBJS
from scripts/Makefile.build.
Going forward we need to use Kbuild style consistently.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoboard: Do not add -DCONFIG_SYS_TEXT_BASE in board config.mk
Masahiro Yamada [Mon, 11 Nov 2013 05:13:33 +0000 (14:13 +0900)]
board: Do not add -DCONFIG_SYS_TEXT_BASE in board config.mk

Board config.mk do not need to add -DCONFIG_SYS_TEXT_BASE
to CPPFLAGS because the top level config.mk does instead.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoexamples: remove the remainders of dead board
Masahiro Yamada [Mon, 11 Nov 2013 03:45:40 +0000 (12:45 +0900)]
examples: remove the remainders of dead board

Commit 309a292e deleted OXC board, but
missed to remove the standalone example specific to OXC board.

eepro100_eeprom.c has been an orphan file for a long term.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agocosmetic: README.scrapyard: Add eNET board
Masahiro Yamada [Mon, 11 Nov 2013 03:15:58 +0000 (12:15 +0900)]
cosmetic: README.scrapyard: Add eNET board

Commit 7e8c53d7 removed eNET board but missed to
add eNET to README.scrapyard.
This commit adds it for the record.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Graeme Russ <graeme.russ@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
7 years agonios2: remove unnecessary header include path
Masahiro Yamada [Mon, 11 Nov 2013 03:11:12 +0000 (12:11 +0900)]
nios2: remove unnecessary header include path

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
7 years agoboard: cogent: include header files in a more natural way
Masahiro Yamada [Mon, 11 Nov 2013 01:30:20 +0000 (10:30 +0900)]
board: cogent: include header files in a more natural way

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoconfigs: clean up unused macro CONFIG_L2_OFF
Masahiro Yamada [Mon, 11 Nov 2013 00:49:36 +0000 (09:49 +0900)]
configs: clean up unused macro CONFIG_L2_OFF

Since commit c2dd0d455 and 45bf05854 introduced
the new cache maintainance framework to ARM,
CONFIG_L2_OFF has not been used at all.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoTI:omap: Update u-boot-spl.lds for i2c multibus/multiadapter update
Tom Rini [Fri, 15 Nov 2013 17:20:33 +0000 (12:20 -0500)]
TI:omap: Update u-boot-spl.lds for i2c multibus/multiadapter update

In 6789e84 we update u-boot-spl.lds for OMAP to ensure we include
adapter information, as we use i2c during SPL.  However, the regex used
also means we included commands that may have been built.  On omap5_uevm
this leads to a failure as we include the command from the do_tca642x
command, and fail to link.  The fix is to restrict our regex to only the
i2c list parts.

Signed-off-by: Tom Rini <trini@ti.com>
7 years agomalta: use unmapped flash base address
Gabor Juhos [Tue, 12 Nov 2013 15:47:32 +0000 (16:47 +0100)]
malta: use unmapped flash base address

The physical base address of the NOR flash is 0x1e000000
on the Malta boards. The hardware also maps the first 4MiB
of the flash into the 0x1fc00000-0x1fffffff range.

Currently, U-Boot uses the mapped address to access the
flash, which does not work in recent qemu versions.

Since commit a427338b222b43197c2776cbc996936df0302f51
(mips_malta: correct reading MIPS revision at 0x1fc00010)
writing to the mapped address space causes a CPU exception.
Due to the exception, U-Boot hangs during boot when it tries
to detect the CFI flash chip.

Use the correct physical address for the MALTA_FLASH_BASE
constant to fix the problem. In order to avoid relocation
problems, also update the CONFIG_SYS_{TEXT,MONITOR}_BASE
constants.

The change makes it possible to start U-Boot on a Malta
board emulated with Qemu 1.6.1 and 1.7.0-rc0. It also
works on older versions (tested with 1.1.1, 1.2.2, 1.4.2,
1.5.3).

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
7 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Tom Rini [Thu, 14 Nov 2013 16:48:15 +0000 (11:48 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

7 years agopowerpc/85xx: fix broken cpu "clock-frequency" property
Laurentiu TUDOR [Wed, 23 Oct 2013 12:20:45 +0000 (15:20 +0300)]
powerpc/85xx: fix broken cpu "clock-frequency" property

When indexing freqProcessor[] we use the first
value in the cpu's "reg" property, which on
new e6500 cores IDs the threads.
But freqProcessor[] should be indexed with a
core index so, when fixing "the clock-frequency"
cpu node property, access the freqProcessor[]
with the core index derived from the "reg' property.
If we don't do this, last half of the "cpu" nodes
will have broken "clock-frequency" values.

Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
Cc: York Sun <yorksun@freescale.com>
7 years agopowerpc/t4240: fix per pci endpoint liodn offsets
Laurentiu TUDOR [Wed, 23 Oct 2013 12:20:27 +0000 (15:20 +0300)]
powerpc/t4240: fix per pci endpoint liodn offsets

Update the code that builds the pci endpoint liodn
offset list so that it doesn't overlap with other
liodns and doesn't generate negative offsets like:

  fsl,liodn-offset-list = <0 0xffffffcd 0xffffffcf
                             0xffffffd1 0xffffffd3
                             0xffffffd5 0xffffffd7
                             0xffffffd9 0xffffffdb>;

The update consists in adding a parameter to the
function that builds the list to specify the base
liodn.
On PCI v2.4 use the old base = 256 and, on PCI 3.0
where some of the PCIE liodns are larger than 256,
use a base = 1024. The version check is based on
the PCI controller's version register.

Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: York Sun <yorksun@freescale.com>
7 years agopowerpc/t4240: set pcie liodn in the correct register
Laurentiu TUDOR [Wed, 23 Oct 2013 12:20:16 +0000 (15:20 +0300)]
powerpc/t4240: set pcie liodn in the correct register

The liodn for the T4240's PCIE controller is no longer set
through a register in the guts register block but with one
in the PCIE register block itself.
Use the already existing SET_PCI_LIODN_BASE macro that puts
the liodn in the correct register.

Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: York Sun <yorksun@freescale.com>
7 years agopowerpc/83xx: Define USB1 and USB2 base addr for MPC834x
ramneek mehresh [Sat, 19 Oct 2013 14:03:04 +0000 (19:33 +0530)]
powerpc/83xx: Define USB1 and USB2 base addr for MPC834x

Define base addresse for both MPH(USB1) and DR(USB2) controllers
for MPC834x socs

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
7 years agopowerpc/t104xrdb: Add T1042RDB_PI board support
Priyanka Jain [Fri, 18 Oct 2013 11:49:23 +0000 (17:19 +0530)]
powerpc/t104xrdb: Add T1042RDB_PI board support

T1042RDB_PI is Freescale Reference Design Board supporting the T1042
QorIQ Power Architecture™ processor. T1042 is a reduced personality
of T1040 SoC without Integrated 8-port Gigabit. The board is designed
with low power features targeted for Printing Image Market.

T1042RDB_PI is  similar to T1040RDB board with few differences like
it has video interface, supports T1042 personality

 T1042RDB_PI board Overview
 -----------------------
 - Four e5500 cores, each with a private 256 KB L2 cache
 - 256 KB shared L3 CoreNet platform cache (CPC)
 - Interconnect CoreNet platform
 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
   support
 - Data Path Acceleration Architecture (DPAA) incorporating acceleration
 for the following functions:
    -  Packet parsing, classification, and distribution
    -  Queue management for scheduling, packet sequencing, and congestion
     management
    -  Cryptography Acceleration
    - RegEx Pattern Matching Acceleration
    - IEEE Std 1588 support
    - Hardware buffer management for buffer allocation and deallocation
 - Ethernet interfaces
    - Two on-board RGMII 10/100/1G ethernet ports.
 - SERDES Connections, 8 lanes supporting:
      — PCI
      — SATA 2.0
 - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and
   Interleaving
 -IFC/Local Bus
     - NAND flash: 1GB 8-bit NAND flash
     - NOR: 128MB 16-bit NOR Flash
 - Ethernet
     - Two on-board RGMII 10/100/1G ethernet ports.
     - PHY #0 remains powered up during deep-sleep
 - CPLD
 - Clocks
     - System and DDR clock (SYSCLK, “DDRCLK”)
     - SERDES clocks
 - Video
     - DIU supports video at up to 1280x1024x32bpp
     - HDMI connector
 - Power Supplies
 - USB
     - Supports two USB 2.0 ports with integrated PHYs
     - Two type A ports with 5V@1.5A per port.
 - SDHC
     - SDHC/SDXC connector
 - SPI
     - On-board 64MB SPI flash
 - I2C
     - Device connected: EEPROM, thermal monitor, VID controller, RTC
 - Other IO
    - Two Serial ports
    - ProfiBus port
    - Four I2C ports

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
7 years agopowerpc/t104xrdb: Add T1040RDB board support
Priyanka Jain [Fri, 18 Oct 2013 11:49:06 +0000 (17:19 +0530)]
powerpc/t104xrdb: Add T1040RDB board support

T1040RDB is Freescale Reference Design Board supporting
the T1040 QorIQ Power Architecture™ processor.

 T1040RDB board Overview
 -----------------------
 - Four e5500 cores, each with a private 256 KB L2 cache
 - 256 KB shared L3 CoreNet platform cache (CPC)
 - Interconnect CoreNet platform
 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
   support
 - Data Path Acceleration Architecture (DPAA) incorporating acceleration
 for the following functions:
    -  Packet parsing, classification, and distribution
    -  Queue management for scheduling, packet sequencing, and congestion
       management
    -  Cryptography Acceleration
    - RegEx Pattern Matching Acceleration
    - IEEE Std 1588 support
    - Hardware buffer management for buffer allocation and deallocation
 - Ethernet interfaces
    - Integrated 8-port Gigabit Ethernet switch
    - Four 1 Gbps Ethernet controllers
 - SERDES Connections, 8 lanes supporting:
    - PCI
    - SGMII
    - QSGMII
    - SATA 2.0
 - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and
   Interleaving
 -IFC/Local Bus
    - NAND flash: 1GB 8-bit NAND flash
    - NOR: 128MB 16-bit NOR Flash
 - Ethernet
    - Two on-board RGMII 10/100/1G ethernet ports.
    - PHY #0 remains powered up during deep-sleep
 - CPLD
 - Clocks
    - System and DDR clock (SYSCLK, “DDRCLK”)
    - SERDES clocks
 - Power Supplies
 - USB
    - Supports two USB 2.0 ports with integrated PHYs
    - Two type A ports with 5V@1.5A per port.
 - SDHC
    - SDHC/SDXC connector
 - SPI
    - On-board 64MB SPI flash
 - I2C
    - Devices connected: EEPROM, thermal monitor, VID controller
 - Other IO
    - Two Serial ports
    - ProfiBus port

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
[York Sun: fixed Makefile]
Acked-by: York Sun <yorksun@freescale.com>
7 years agopowerpc/t1040: Update defines to support T1040SoC personalities
Priyanka Jain [Fri, 18 Oct 2013 07:00:21 +0000 (12:30 +0530)]
powerpc/t1040: Update defines to support T1040SoC personalities

T1040 Soc has four personalities:
-T1040 (4 cores with L2 switch)
-T1042:Reduced personality of T1040 without L2 switch
-T1020:Reduced personality of T1040 with less cores(2 cores)
-T1022:Reduced personality of T1040 with 2 cores and without L2 switch

Update defines in arch/powerpc header files, Makefiles and in
driver/net/fm/Makefile to support all T1040 personalities

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
[York Sun: fixed Makefiles]
Acked-by: York Sun <yorksun@freescale.com>
7 years agopowerpc/p1010rdb: update readme for p1010rdb-pa and p1010rdb-pb
Shengzhou Liu [Fri, 11 Oct 2013 15:02:38 +0000 (23:02 +0800)]
powerpc/p1010rdb: update readme for p1010rdb-pa and p1010rdb-pb

- Remove duplicate doc/README.p1010rdb
- Rename README to README.P1010RDB-PA
- Add new README.P1010RDB-PB

P1010RDB-PB is a variation of previous P1010RDB-PA board.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
7 years agopowerpc/t1040: enable PBL tool for T1040
Prabhakar Kushwaha [Tue, 1 Oct 2013 08:26:43 +0000 (13:56 +0530)]
powerpc/t1040: enable PBL tool for T1040

Use a default RCW of protocol 0x66.
A PBI configure file which uses CPC as 256KB SRAM. It can be used by
PBL tool on T1040 to build a pbl boot image.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
7 years agodesignware_i2c: remove 10msec delay in i2c_xfer_finish
Alexey Brodkin [Thu, 7 Nov 2013 13:52:33 +0000 (17:52 +0400)]
designware_i2c: remove 10msec delay in i2c_xfer_finish

This delay applies to any data transfer on I2C bus.

For example 1kB data read with per-byte access (which happens if
environment is stored in I2C EEPROM) takes more than 10 seconds.

Moreover data bus driver has to care about bus state and data transfer,
but not about internal states of attached devices.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Tom Rini <trini@ti.com>
cc: Armando Visconti <armando.visconti@st.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Vipin KUMAR <vipin.kumar@st.com>
Cc: Tom Rix <Tom.Rix@windriver.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
7 years agodesignware_i2c: disable i2c controller during target address setup
Alexey Brodkin [Thu, 7 Nov 2013 13:52:18 +0000 (17:52 +0400)]
designware_i2c: disable i2c controller during target address setup

As it is stated in DesignWare I2C databook: writes to IC_TAR (0x4)
register succeed only when IC_ENABLE[0] is set to 0.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Tom Rini <trini@ti.com>
cc: Armando Visconti <armando.visconti@st.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Vipin KUMAR <vipin.kumar@st.com>
Cc: Tom Rix <Tom.Rix@windriver.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
7 years agocmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM
Alexey Brodkin [Thu, 7 Nov 2013 13:51:43 +0000 (17:51 +0400)]
cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM

Data "offset" is not used directly in case of I2C EEPROM. Istead it is
split into "block number" and "offset within mentioned block". Which are
"addr[0]" and "addr[1]" respectively.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Mischa Jonker <mjonker@synopsys.com>
7 years agoi2c, omap1510: remove i2c driver
Heiko Schocher [Fri, 8 Nov 2013 07:33:22 +0000 (08:33 +0100)]
i2c, omap1510: remove i2c driver

remove omap1510 i2c driver, as there is no board which uses it

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Jian Zhang <jzhang@ti.com>
7 years agoi2c, zynq: convert zynq i2c driver to new multibus/multiadapter framework
Heiko Schocher [Fri, 8 Nov 2013 06:30:53 +0000 (07:30 +0100)]
i2c, zynq: convert zynq i2c driver to new multibus/multiadapter framework

- add zync i2c driver to new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Michal Simek <michal.simek@xilinx.com>
7 years agoi2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
Heiko Schocher [Tue, 22 Oct 2013 09:03:18 +0000 (11:03 +0200)]
i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework

- add omap24xx driver to new multibus/multiadpater support
- adapted all config files, which uses this driver

Tested on the am335x based siemens boards rut, dxr2 and pxm2
posted here:
http://patchwork.ozlabs.org/patch/263211/

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Tom Rini <trini@ti.com>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Thomas Weber <weber@corscience.de>
Cc: Tom Rix <Tom.Rix@windriver.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Cc: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Ilya Yanok <yanok@emcraft.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Nishanth Menon <nm@ti.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Peter Barada <peter.barada@logicpd.com>
Cc: Nagendra T S <nagendra@mistralsolutions.com>
Cc: Michael Jones <michael.jones@matrix-vision.de>
Cc: Raphael Assenat <raph@8d.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Stefano Babic <sbabic@denx.de>
7 years agoi2c: mxs_i2c: Squash endless loop
Marek Vasut [Mon, 4 Nov 2013 13:29:12 +0000 (14:29 +0100)]
i2c: mxs_i2c: Squash endless loop

The endless waiting for a bit to be set can cause a hang, add a timeout
so we prevent such situation. A testcase for such a hang is below. The
testcase assumes a device to be present at address 0x50 and a device to
NOT be present at address 0x42 . Also note that the "sleep 1" induced
delays are imperative for this bug to manifest .

i2c read 0x42 0x0.2 0x10 0x42000000 ; sleep 1 ; \
i2c read 0x50 0x0.2 0x10 0x42000000 ; sleep 1 ; \
i2c read 0x42 0x0.2 0x10 0x42000000

The expected result of the above command is:

Error reading the chip.
Error reading the chip.

While without this patch, we observe a hang in the last read from 0x42
precisely when waiting for this bit to be set.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
7 years agoi2c: sh_i2c: Update to new CONFIG_SYS_I2C framework
Nobuhiro Iwamatsu [Tue, 29 Oct 2013 04:33:51 +0000 (13:33 +0900)]
i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework

This updates to new I2C framwwork on sh_i2c.
And this also updates boards(kzm9g and ecovec) that using sh_i2c.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agocm_t35: use scf0403 driver
Nikita Kiryanov [Wed, 16 Oct 2013 14:23:29 +0000 (17:23 +0300)]
cm_t35: use scf0403 driver

Use scf0403 driver to add scf0403x LCD support for cm-t35 and cm-t3730
boards.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
7 years agoomap3_dss: define DSS_ONOFF
Nikita Kiryanov [Wed, 16 Oct 2013 14:23:28 +0000 (17:23 +0300)]
omap3_dss: define DSS_ONOFF

Add DSS_ONOFF to polarity defines

Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Anatolij Gustschin <agust@denx.de>
7 years agolcd: add DataImage SCF0403x LCD panel support
Nikita Kiryanov [Wed, 16 Oct 2013 14:23:27 +0000 (17:23 +0300)]
lcd: add DataImage SCF0403x LCD panel support

Add SPI-based driver for DataImage SCF0403852GGU04 and SCF0403526GGU20
LCD panels.

Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
7 years agospi: define SPI_XFER_ONCE
Nikita Kiryanov [Wed, 16 Oct 2013 14:23:26 +0000 (17:23 +0300)]
spi: define SPI_XFER_ONCE

The flag combination "SPI_XFER_BEGIN | SPI_XFER_END" is a common use
case of spi_xfer, and it can easily cause an already long line (spi_xfer
takes 5 parameters) to go over the 80 character limit.

define SPI_XFER_ONCE to be a shorter version of the above flag combination.

Cc: Tom Rini <trini@ti.com>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
7 years agospi: omap3: add support for more word lengths
Nikita Kiryanov [Wed, 16 Oct 2013 14:23:25 +0000 (17:23 +0300)]
spi: omap3: add support for more word lengths

Current implementation only supports 8 bit word lengths, even though
omap3 can handle anything between 4 and 32.

Update the spi interface to support changing the SPI word length,
and implement it in omap3_spi driver to support the full range of
possible word lengths.
This implementation is backwards compatible by defaulting to the old
behavior of 8 bit word lengths.
Also, it required a change to the omap3_spi non static I/O functions,
but since they are not used anywhere else, no collateral changes are required.

Cc: Tom Rini <trini@ti.com>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
7 years agospi: omap3: remove semicolon from #define
Nikita Kiryanov [Wed, 16 Oct 2013 14:23:24 +0000 (17:23 +0300)]
spi: omap3: remove semicolon from #define

Remove unnecessary semicolon from #define SPI_WAIT_TIMEOUT

Cc: Tom Rini <trini@ti.com>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
7 years agovideo: bcm2835: respect the pitch value
Andre Heider [Sat, 9 Nov 2013 10:07:53 +0000 (11:07 +0100)]
video: bcm2835: respect the pitch value

Depending on the firmware's video options [1] the active SDTV or
HDTV mode can yield a framebuffer with noncontiguous horizontal lines,
giving a messed up display, for both, u-boot and the loaded kernel.

Fix this by setting lcd_line_length to the pitch value of the configured
framebuffer.

[1] http://elinux.org/RPiconfig#Video_mode_options

Signed-off-by: Andre Heider <a.heider@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
7 years agolcd: allow overriding lcd_get_size()
Anatolij Gustschin [Sat, 9 Nov 2013 10:00:09 +0000 (11:00 +0100)]
lcd: allow overriding lcd_get_size()

Remove the redundant lcd_line_length initialisation which
sneaked in when an earlier version of the patch of commit
6d330719 has been rebased.

Some lcd drivers need to setup lcd_line_length not from the
panel_info parameters but by different means. Make the
lcd_get_size() weak to allow setting lcd_line_length in
a driver specific way.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
7 years agoARM: bcm2835: add missing mbox overscan response field
Andre Heider [Tue, 22 Oct 2013 20:27:20 +0000 (22:27 +0200)]
ARM: bcm2835: add missing mbox overscan response field

Add the missing "right" field to struct bcm2835_mbox_tag_overscan.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
7 years agoMPC824x: remove obsolete "PN62" board
Wolfgang Denk [Mon, 11 Nov 2013 19:12:19 +0000 (20:12 +0100)]
MPC824x: remove obsolete "PN62" board

The MPC824x processors have long reached EOL, and the PN62 board has
not seen any board-specific updates for more than a decade.  It is now
causing build issues.  Instead of wasting time on things nobody is
interested in any more, we rather drop this board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
cc: Tom Rini <trini@ti.com>

7 years agotime: fix gcc warnings on MIPS64
Daniel Schwierzeck [Fri, 8 Nov 2013 23:30:14 +0000 (00:30 +0100)]
time: fix gcc warnings on MIPS64

Commit 8dfafdde88eb3e71d5569846396ae67a91017232 introduced
new gcc warnings on MIPS64:

time.c: In function 'tick_to_time':
time.c:59:2: warning: comparison of distinct pointer types lacks a cast [enabled by default]
time.c:59:2: warning: passing argument 1 of '__div64_32' from incompatible pointer type [enabled by default]
In file included from time.c:10:0:
./u-boot-mips/include/div64.h:22:17: note: expected 'uint64_t *' but argument is of type 'long long unsigned int *'
time.c: In function 'usec_to_tick':
time.c:76:2: warning: comparison of distinct pointer types lacks a cast [enabled by default]
time.c:76:2: warning: passing argument 1 of '__div64_32' from incompatible pointer type [enabled by default]
In file included from time.c:10:0:
./u-boot-mips/include/div64.h:22:17: note: expected 'uint64_t *' but argument is of type 'long long unsigned int *'

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
7 years agoMerge branch 'master' of git://git.denx.de/u-boot-mips
Tom Rini [Mon, 11 Nov 2013 14:40:34 +0000 (09:40 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-mips

7 years agomalta: arch/mips/include/asm/malta.h SPDX license tag
Paul Burton [Mon, 11 Nov 2013 11:03:26 +0000 (11:03 +0000)]
malta: arch/mips/include/asm/malta.h SPDX license tag

This patch replaces the GPL-2.0 text with a GPL-2.0
SPDX-License-Identifier tag, and adds Imagination Technologies copyright
following my recent changes.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agoMerge branch 'iu-boot/master' into 'u-boot-arm/master'
Albert ARIBAUD [Sat, 9 Nov 2013 11:51:47 +0000 (12:51 +0100)]
Merge branch 'iu-boot/master' into 'u-boot-arm/master'

Conflicts:
arch/arm/cpu/arm926ejs/mxs/Makefile
board/compulab/cm_t35/Makefile
board/corscience/tricorder/Makefile
board/ppcag/bg0900/Makefile
drivers/bootcount/Makefile
include/configs/omap4_common.h
include/configs/pdnb3.h

Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:

board/compulab/common/Makefile
board/udoo/Makefile

include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.

include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.

Note: 'git show' will also list two files just because
they are new:

include/configs/am335x_igep0033.h
include/configs/omap3_igep00x0.h

7 years agomalta: define CONFIG_MEMSIZE_IN_BYTES
Gabor Juhos [Thu, 24 Oct 2013 12:32:00 +0000 (14:32 +0200)]
malta: define CONFIG_MEMSIZE_IN_BYTES

The memsize environment variable must contain the
memory size in bytes on the Malta board. Otherwise
Linux will use wrong memory size which causes a kernel
panic.

Define CONFIG_MEMSIZE_IN_BYTES in malta.h to avoid
that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: add myself to maintainers
Paul Burton [Fri, 8 Nov 2013 11:18:59 +0000 (11:18 +0000)]
malta: add myself to maintainers

This patch adds me as a maintainer of the malta(el) board(s). I have
access to physical Malta boards and the desire for U-boot to run well on
them.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: add script & instructions to flash U-boot
Paul Burton [Fri, 8 Nov 2013 11:18:58 +0000 (11:18 +0000)]
malta: add script & instructions to flash U-boot

This patch adds a script which may be used with MIPS Navigator Console
and a MIPS Nagivator Probe in order to flash U-boot to a MIPS Malta
development board.

Please see the newly added doc/README.malta for usage instructions.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: setup PIIX4 interrupt route
Paul Burton [Fri, 8 Nov 2013 11:18:57 +0000 (11:18 +0000)]
malta: setup PIIX4 interrupt route

Without setting up the PIRQ[A:D] interrupt routes, PCI interrupts will
be left disabled. Linux does not set up this routing but relies upon it
having been set up by the bootloader, reading back the IRQ lines which
the PIRQ[A:D] signals have been routed to.

This patch routes PIRQA & PIRQB to IRQ 10, and PIRQC & PIRQD to IRQ 11.
This matches the setup used by YAMON.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: store environment in flash
Paul Burton [Fri, 8 Nov 2013 11:18:56 +0000 (11:18 +0000)]
malta: store environment in flash

Allow the environment to be stored in the monitor flash of a Malta
board. The environment is stored in the final 128KB of the flash, which
both leaves the majority of the flash available for U-boot code and also
matches the location which YAMON uses.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: enable RTC support
Paul Burton [Fri, 8 Nov 2013 11:18:55 +0000 (11:18 +0000)]
malta: enable RTC support

This is actually required in order for a Linux kernel to boot
successfully on a physical Malta board. Without enabling the RTC, a
Malta Linux kernel will get stuck in its estimate_frequencies function
on boot.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: disable L2 caches
Paul Burton [Fri, 8 Nov 2013 11:18:54 +0000 (11:18 +0000)]
malta: disable L2 caches

Malta boards may be used with cores which support L2 caches, however
U-boot does not yet support L2 cache for MIPS. Thus for the moment we'll
disable L2 caches by setting the L2B bit in Config2. This is specific to
MTI/Imagination MIPS cores which is why this is done for the Malta board
rather than generically.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: remove cache size definitions
Paul Burton [Fri, 8 Nov 2013 11:18:53 +0000 (11:18 +0000)]
malta: remove cache size definitions

These will now be detected at runtime, allowing a single U-boot
configuration to function correctly with different bitstreams. Without
this you may need to re-configure, re-build and re-flash U-boot to your
Malta if you flash a new bitstream with a different cache configuration
to your old bitstream.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: enable CONFIG_PCNET_79C973, PCNET_HAS_PROM, CONFIG_CMD_DHCP
Paul Burton [Fri, 8 Nov 2013 11:18:52 +0000 (11:18 +0000)]
malta: enable CONFIG_PCNET_79C973, PCNET_HAS_PROM, CONFIG_CMD_DHCP

This model of the pcnet is used in current Malta boards, at least in the
Malta-R rev 3. Enable support for it.

The Malta also has the ethernet controller PROM containing its MAC
address, so enable support for that in order to read that MAC address.

DHCP is a very useful feature to have available for many networks,
enable support for it also.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: display "U-boot" on the LCD screen
Paul Burton [Fri, 8 Nov 2013 11:18:51 +0000 (11:18 +0000)]
malta: display "U-boot" on the LCD screen

Displaying a message on the LCD screen is a simple yet effective way to
show the user that the board has booted successfully.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: support for coreFPGA6 boards
Paul Burton [Fri, 8 Nov 2013 11:18:50 +0000 (11:18 +0000)]
malta: support for coreFPGA6 boards

This patch adds support for running on Malta boards using coreFPGA6
core cards, including support for the msc01 system controller used
with them. The system controller is detected at runtime allowing one
U-boot binary to run on a Malta with either.

Due to the PCI I/O base differing between Maltas using gt64120 & msc01
system controllers, the UART setup is modified slightly. A second UART
is added so that there is one pointing at the correct address for each
system controller. The Malta board then defines its own
default_serial_console function to select the correct one at runtime.
The incorrect UART will simply not function.

Tested on:
  - A coreFPGA6 Malta running interAptiv and proAptiv bitstreams, both
    with and without an L2 cache.
  - QEMU.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomalta: setup super I/O UARTs
Paul Burton [Fri, 8 Nov 2013 11:18:49 +0000 (11:18 +0000)]
malta: setup super I/O UARTs

On a real Malta the Super I/O needs to be configured before we are able
to access the UARTs. This patch performs that configuration, setting up
the UARTs in the same way that YAMON would.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agoqemu-malta: rename to just "malta"
Paul Burton [Sat, 9 Nov 2013 10:22:08 +0000 (10:22 +0000)]
qemu-malta: rename to just "malta"

This is in preparation for adapting this board to function correctly on
a physical MIPS Malta board. The board is moved into an "imgtec" vendor
directory at the same time in order to ready us for any other boards
supported by Imagination in the future.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agopci.h: allow inclusion in assembly source
Paul Burton [Fri, 8 Nov 2013 11:18:47 +0000 (11:18 +0000)]
pci.h: allow inclusion in assembly source

This patch simply #ifdef's out the C-specific parts of pci.h when it is
included by an assembly file. This will allow the macros it contains to
be used from assembly source as will be done in a followup commit adding
support for more modern MIPS Malta boards.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agopcnet: enable the NOUFLO feature
Paul Burton [Fri, 8 Nov 2013 11:18:46 +0000 (11:18 +0000)]
pcnet: enable the NOUFLO feature

On relatively slow boards (such as the MIPS Malta with an FPGA core
card) it can be extremely common for transmits to underflow - to the
point where it appears they simply do not work at all. Setting the
NOUFLO bit causes the ethernet controller to not begin transmission on
the wire until a transmit start point is reached. Setting that transmit
start point to the full packet will cause the controller to only
transmit the packet once it has buffered it entirely thus preventing any
transmit underflows from occuring and allowing the controller to
function on slower boards.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agopcnet: add cache flushing & invalidation
Paul Burton [Fri, 8 Nov 2013 11:18:45 +0000 (11:18 +0000)]
pcnet: add cache flushing & invalidation

Ensure that the view of memory from the CPU & the ethernet controller is
coherent at the various points where they exchange data. This prevents
stale data from being transmitted or received, and prevents the driver
from getting stuck waiting for the ethernet controller to update
descriptors when in reality it has but the old values are being read
from cache.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agopcnet: s/le16_to_cpu/cpu_to_le16/ in pcnet_send
Paul Burton [Fri, 8 Nov 2013 11:18:44 +0000 (11:18 +0000)]
pcnet: s/le16_to_cpu/cpu_to_le16/ in pcnet_send

This should cause no change to the generated code, but is semantically
correct.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agopcnet: code style cleanup
Paul Burton [Fri, 8 Nov 2013 11:18:43 +0000 (11:18 +0000)]
pcnet: code style cleanup

Fix up the code to match Documentation/CodingStyle. This is mostly
removing extraneous spaces.

No functional change is intended.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agomips32: detect L1 cache sizes if they're not defined
Paul Burton [Fri, 8 Nov 2013 11:18:42 +0000 (11:18 +0000)]
mips32: detect L1 cache sizes if they're not defined

For boards such as the MIPS Malta with an FPGA core card it is desirable
to be able to detect the L1 cache sizes at runtime, since they are not
dependant upon the board but on the FPGA bitstream in use. This patch
performs that detection when the CONFIG_SYS_[DI]CACHE_SIZE macros are
not defined by the board configuration. In cases where the sizes are
detected this patch also removes the restriction that the I-cache &
D-cache line sizes must be the same, as this is not necessarily true.

If the cache sizes are defined by a configuration then they will be
hardcoded as before, so this patch will not add overhead to such
boards.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
7 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-usb
Tom Rini [Fri, 8 Nov 2013 20:25:29 +0000 (15:25 -0500)]
Merge branch 'master' of git://denx.de/git/u-boot-usb

7 years agosandbox: convert to common time functions
Rob Herring [Fri, 8 Nov 2013 14:40:44 +0000 (08:40 -0600)]
sandbox: convert to common time functions

Convert sandbox to use common time functions.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
7 years agotime: add weak annotation to timer_read_counter declaration
Rob Herring [Fri, 8 Nov 2013 14:40:43 +0000 (08:40 -0600)]
time: add weak annotation to timer_read_counter declaration

A weak annotation is needed in order to prevent link errors when
get_ticks is overridden. This fixes sandbox build.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
7 years agonetconsole loses 2nd character of input
Suriyan Ramasami [Wed, 16 Oct 2013 16:54:24 +0000 (09:54 -0700)]
netconsole loses 2nd character of input

Netconsole loses the second character when used as input by
either setenv stdin nc or setenv stdin serial,nc if using CONSOLE_CONSOLE_MUX

Before a nc_send_packet() to echo the input, a check is done to see if
nc_ether is valid. If its not, it waits for an arp request and then sends
the packet (which contains the first character of line to be displayed as
output). As part of reaping the arp request, the second character is consumed.
We protect this by making the call to NetLoop(NETCONS) between
input_recursion.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
7 years agoserial: s5p: Staticize local functions
Axel Lin [Wed, 16 Oct 2013 01:47:13 +0000 (09:47 +0800)]
serial: s5p: Staticize local functions

Staticize local functions in s5p serial driver.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
7 years agoenv: fix the env export varname
Pierre Aubert [Tue, 8 Oct 2013 12:20:27 +0000 (14:20 +0200)]
env: fix the env export varname

The env export command doesn't export the first variable of the list
since commit 5a31ea04c9ee5544fbb70ad7597ea4b294840eab
"env grep" - reimplement command using hexport_r()

Signed-off-by: Pierre Aubert <p.aubert@staubli.com>
7 years agohighbank: set AUTOBOOT_KEYED_CTRLC config option
Mark Langsdorf [Tue, 10 Sep 2013 20:20:24 +0000 (15:20 -0500)]
highbank: set AUTOBOOT_KEYED_CTRLC config option

Let highbank users break into the autoboot script with ctrl-c.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
7 years agoautoboot: add an option to override keyed autoboot
Mark Langsdorf [Tue, 10 Sep 2013 20:20:23 +0000 (15:20 -0500)]
autoboot: add an option to override keyed autoboot

As originally implemented, setting the AUTOBOOT_KEYED config option will
prevent users from breaking into the autoboot script with ctrl-c. Restore
that option with a new config symbol.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
7 years agoserial: xuartlite: Staticize local functions
Axel Lin [Wed, 16 Oct 2013 01:45:56 +0000 (09:45 +0800)]
serial: xuartlite: Staticize local functions

Staticize local functions in xuartlite driver.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Stefan Roese <sr@denx.de>
Tested-by: Michal Simek <monstr@monstr.eu>
7 years agoserial: mxs_auart: Staticize local functions
Axel Lin [Tue, 15 Oct 2013 02:52:35 +0000 (10:52 +0800)]
serial: mxs_auart: Staticize local functions

Staticize local functions in mxs_auart driver.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Marek Vasut <marex@denx.de>
7 years agofs:fat: fix set file name function
Piotr Wilczek [Fri, 11 Oct 2013 13:43:33 +0000 (15:43 +0200)]
fs:fat: fix set file name function

Curently memcpy copies string without null terminating char because
function strlen returns only number of characters excluding
null terminating character. Replace memcpy with strcpy.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Tom Rini <trini@ti.com>
7 years agocmd_zfs: normalize 'file not found' errors
Luka Perkov [Wed, 9 Oct 2013 23:32:28 +0000 (01:32 +0200)]
cmd_zfs: normalize 'file not found' errors

Signed-off-by: Luka Perkov <luka@openwrt.org>
7 years agocmd_reiser: normalize 'file not found' errors
Luka Perkov [Wed, 9 Oct 2013 23:32:27 +0000 (01:32 +0200)]
cmd_reiser: normalize 'file not found' errors

Signed-off-by: Luka Perkov <luka@openwrt.org>
7 years agocmd_ubifs: normalize 'file not found' errors
Tim Harvey [Wed, 9 Oct 2013 23:32:26 +0000 (01:32 +0200)]
cmd_ubifs: normalize 'file not found' errors

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
7 years agoinclude: delete include/linux/config.h
Masahiro Yamada [Mon, 7 Oct 2013 07:04:18 +0000 (16:04 +0900)]
include: delete include/linux/config.h

Linux Kernel abolished include/linux/config.h long time ago.
(around version v2.6.18..v2.6.19)

We don't need to provide Linux copatibility any more.

This commit deletes include/linux/config.h
and fixes source files not to include this.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
7 years agoconfig/sandbox: Add EFI and GPT support
Egbert Eich [Fri, 4 Oct 2013 17:44:07 +0000 (19:44 +0200)]
config/sandbox: Add EFI and GPT support

Signed-off-by: Egbert Eich <eich@suse.com>