karo-tx-uboot.git
11 years agoMerge branch 'master' of git://git.denx.de/u-boot-i2c
Wolfgang Denk [Fri, 19 Nov 2010 21:02:40 +0000 (22:02 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-blackfin
Wolfgang Denk [Fri, 19 Nov 2010 21:00:28 +0000 (22:00 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin

11 years agoMerge branch 'net' of git://git.denx.de/u-boot-sparc
Wolfgang Denk [Fri, 19 Nov 2010 20:56:56 +0000 (21:56 +0100)]
Merge branch 'net' of git://git.denx.de/u-boot-sparc

11 years agoBlackfin: make sure bss len is multiple of 4 bytes
Mike Frysinger [Mon, 15 Nov 2010 13:16:19 +0000 (08:16 -0500)]
Blackfin: make sure bss len is multiple of 4 bytes

The Blackfin on-chip BootROM requires that fill operations (which is
used for the bss) be aligned to 4 bytes (base addr and total len).
Plus, the Blackfin early init asm code assumes the same thing.  So
rather than making things work for no real gain, make sure the bss
len is padded to 4 bytes in the linker script.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11 years agoBlackfin: stick ins/outs funcs into their own .text section
Mike Frysinger [Mon, 15 Nov 2010 11:42:42 +0000 (06:42 -0500)]
Blackfin: stick ins/outs funcs into their own .text section

This lets the linker garbage collect these functions when they aren't
actually used by placing them into the standard .text.<func> section.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11 years agoMakefile: Fix build with USE_PRIVATE_LIBGCC
Matthias Weisser [Thu, 18 Nov 2010 08:35:09 +0000 (09:35 +0100)]
Makefile: Fix build with USE_PRIVATE_LIBGCC

If USE_PRIVATE_LIBGCC is set the yes building fails with a missing
libgcc.a As we use partial linking now it is libgcc.o now.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
11 years agoGRETH: removed space in network driver device name.
Daniel Hellstrom [Thu, 21 Oct 2010 13:08:11 +0000 (15:08 +0200)]
GRETH: removed space in network driver device name.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
11 years agoGRETH: fixed 2 decriptor table typos
Daniel Hellstrom [Fri, 22 Oct 2010 09:36:39 +0000 (11:36 +0200)]
GRETH: fixed 2 decriptor table typos

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
11 years agoGRETH: Added extra RESET, this is needed if GRETH was stopped during an ethernet...
Daniel Hellstrom [Fri, 22 Oct 2010 09:34:01 +0000 (11:34 +0200)]
GRETH: Added extra RESET, this is needed if GRETH was stopped during an ethernet frame reception.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
11 years agoGRETH: Added autodetection of PHY address, or let BSP hardcode it.
Daniel Hellstrom [Fri, 22 Oct 2010 09:26:49 +0000 (11:26 +0200)]
GRETH: Added autodetection of PHY address, or let BSP hardcode it.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
11 years agoGRETH: made debug printouts use common debug() macro.
Daniel Hellstrom [Wed, 27 Oct 2010 07:24:13 +0000 (09:24 +0200)]
GRETH: made debug printouts use common debug() macro.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
11 years agoGRETH: removed unneccesary register write and one clean up.
Daniel Hellstrom [Wed, 27 Oct 2010 07:39:46 +0000 (09:39 +0200)]
GRETH: removed unneccesary register write and one clean up.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
11 years agomalloc: Fix issue with calloc memory possibly being non-zero
Kumar Gala [Tue, 16 Nov 2010 00:41:43 +0000 (18:41 -0600)]
malloc: Fix issue with calloc memory possibly being non-zero

Since we set #define MORECORE_CLEARS 1, the code assumes 'sbrk' always
returns zero'd out memory.  However since its possible that free()
returns memory back to sbrk() via malloc_trim we could possible get
non-zero'd memory from sbrk().  This is a problem for when code might
call calloc() and expect the memory to have been zero'd out.

There are two possible solutions to this problem.
1. change #define MORECORE_CLEARS 0
2. memset to zero memory returned to sbrk.

We go with the second since the sbrk being called to free up memory
should be pretty rare.

The following code problems an example test to show the issue.  This
test code was inserted right after the call to mem_malloc_init().

...
       u8 *p2;
       int i;

       printf("MALLOC TEST\n");
       p1 = malloc(135176);
       printf("P1 = %p\n", p1);
       memset(p1, 0xab, 135176);

       free(p1);
       p2 = calloc(4097, 1);
       printf("P2 = %p %p\n", p2, p2 + 4097);

       for (i = 0; i < 4097; i++) {
       if (p2[i] != 0)
       printf("miscompare at byte %d got %x\n", i, p2[i]);

       free(p2);
       printf("END MALLOC TEST\n\n");
...

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Wolfgang Denk <wd@denx.de>
11 years agonet: e1000: typo using wrong argument to sizeof
Matthew McClintock [Tue, 16 Nov 2010 00:02:53 +0000 (18:02 -0600)]
net: e1000: typo using wrong argument to sizeof

Typo from 4b29bdb0ed08412d225a8be94f61fc6c37a59dd5

Signed-off-by: Matthew McClintock <msm@freescale.com>
11 years agoSwitch from archive libraries to partial linking
Sebastien Carlier [Fri, 5 Nov 2010 14:48:07 +0000 (15:48 +0100)]
Switch from archive libraries to partial linking

Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
11 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Wed, 17 Nov 2010 19:54:39 +0000 (20:54 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

11 years agotx25: fix linker file for newer ld support
Albert Aribaud [Mon, 15 Nov 2010 20:46:04 +0000 (21:46 +0100)]
tx25: fix linker file for newer ld support

older ld emitted all ELF relocations in input sections named
.rel.dyn, whereas newer ld uses names of the form .rel*. The
linker script only collected .rel.dyn input sections. Rewrite
to collect all .rel* input sections.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
11 years agoARM: fix linker file for newer ld support
Albert Aribaud [Mon, 15 Nov 2010 20:46:03 +0000 (21:46 +0100)]
ARM: fix linker file for newer ld support

older ld emitted all ELF relocations in input sections named
.rel.dyn, whereas newer ld uses names of the form .rel*. The
linker script only collected .rel.dyn input sections. Rewrite
to collect all .rel* input sections.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
11 years agopost, i2c: add missing curly bracket in i2c_post_test
Heiko Schocher [Mon, 15 Nov 2010 07:20:39 +0000 (08:20 +0100)]
post, i2c: add missing curly bracket in i2c_post_test

If CONFIG_SYS_POST_I2C_ADDRS is not defined and CONFIG_SYS_POST_I2C
is activated, i2c_probe() is not called in the for statement,
because missing curly bracket.

Signed-off-by: Heiko Schocher <hs@denx.de>
11 years agoi2c, mpc5xxx: add multibus support
Heiko Schocher [Wed, 10 Nov 2010 07:57:55 +0000 (08:57 +0100)]
i2c, mpc5xxx: add multibus support

Tested on upcoming hydra (mpc5200 based) board.

Signed-off-by: Heiko Schocher <hs@denx.de>
11 years agoNet: clarify board/cpu_eth_init calls
Ben Warren [Wed, 1 Sep 2010 06:05:04 +0000 (23:05 -0700)]
Net: clarify board/cpu_eth_init calls

This has always been confusing, and the idea of these functions returning the
number of interfaces initialized was half-baked and ultimately pointless.
Instead, act more like regular functions and return < 0 on failure, >= 0 on
success.

This change shouldn't break anything.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11 years agoMakefile: move include for config.mk up
François Revol [Sat, 30 Oct 2010 15:42:00 +0000 (17:42 +0200)]
Makefile: move include for config.mk up

Reorder including config.mk before the HOSTCC check, so HOSTCC is
actually defined when checking for it.

Signed-off-by: François Revol <revol@free.fr>
Cleaned up commit message
Signed-off-by: Wolfgang Denk <wd@denx.de>
11 years agoMAKEALL: Do a sanity check on user-supplied arguments
Peter Tyser [Fri, 29 Oct 2010 22:59:06 +0000 (17:59 -0500)]
MAKEALL: Do a sanity check on user-supplied arguments

Add a check to make sure that the user's arguments actually find a board
in boards.cfg.  Previously, if a user misspelled an argument the
argument would be discarded without warning.  For example, running
'MAKEALL -c 85xx' with the intention of compiling all Freescale 85xx
boards would instead silently discard the '-c 85xx' argument since the
proper cpu name is 'mpc85xx' and then proceed to compile all PowerPC
boards (MAKEALL's default).

Also fix an unrelated typo.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11 years agopci: Use intelligent indentation for CONFIG_PCI_SCAN_SHOW
Peter Tyser [Fri, 29 Oct 2010 22:59:29 +0000 (17:59 -0500)]
pci: Use intelligent indentation for CONFIG_PCI_SCAN_SHOW

When CONFIG_PCI_SCAN_SHOW is defined U-Boot prints out PCI devices as
they are found during bootup, eg:
  PCIE1: connected as Root Complex
        01:00.0 - 10b5:8518 - Bridge device
        02:01.0 - 10b5:8518 - Bridge device
        03:00.0 - 10b5:8112 - Bridge device
        04:01.0 - 8086:1010 - Network controller
        04:01.1 - 8086:1010 - Network controller
        02:02.0 - 10b5:8518 - Bridge device
        02:03.0 - 10b5:8518 - Bridge device
        06:00.0 - 10b5:8518 - Bridge device
        07:00.0 - 10b5:8518 - Bridge device
        08:00.0 - 1957:0040 - Processor
        07:01.0 - 10b5:8518 - Bridge device
        09:00.0 - 10b5:8112 - Bridge device
        07:02.0 - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
        0d:00.0 - 1957:0040 - Processor
  PCIE2: Bus 0c - 0d

This information is useful, but its difficult to determine the PCI bus
topology.  To things clearer, we can use indention to make it more
obvious how the PCI bus is organized.  For the example above, the
updated output with this change is:

  PCIE1: connected as Root Complex
    01:00.0     - 10b5:8518 - Bridge device
     02:01.0    - 10b5:8518 - Bridge device
      03:00.0   - 10b5:8112 - Bridge device
       04:01.0  - 8086:1010 - Network controller
       04:01.1  - 8086:1010 - Network controller
     02:02.0    - 10b5:8518 - Bridge device
     02:03.0    - 10b5:8518 - Bridge device
      06:00.0   - 10b5:8518 - Bridge device
       07:00.0  - 10b5:8518 - Bridge device
        08:00.0 - 1957:0040 - Processor
       07:01.0  - 10b5:8518 - Bridge device
        09:00.0 - 10b5:8112 - Bridge device
       07:02.0  - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
    0d:00.0     - 1957:0040 - Processor
  PCIE2: Bus 0c - 0d

In the examples above, an MPC8640 is connected to a PEX8518 PCIe switch
(01:00 and 02:0x), which is connected to another PEX8518 PCIe switch
(06:00 and 07:0x), which then connects to a MPC8572 processor (08:00).
Also, the MPC8640's PEX8518 PCIe switch is connected to a PCI ethernet
card (04:01) via a PEX8112 PCIe-to-PCI bridge (03:00).

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11 years agopci: Fix ordering of devices when CONFIG_PCI_SCAN_SHOW
Peter Tyser [Fri, 29 Oct 2010 22:59:28 +0000 (17:59 -0500)]
pci: Fix ordering of devices when CONFIG_PCI_SCAN_SHOW

Move the printing of PCI device information to before the PCI device is
configured.  This prevents the case where recursive scanning results in
the deepest devices being printed first.

This change also makes PCI lockups during enumeration easier to
diagnose since the device that is being configured is printed out prior
to configuration.  Previously, it was not possible to determine which
device caused the PCI lockup.

Original example:
  PCIE1: connected as Root Complex
        04:01.0 - 8086:1010 - Network controller
        04:01.1 - 8086:1010 - Network controller
        03:00.0 - 10b5:8112 - Bridge device
        02:01.0 - 10b5:8518 - Bridge device
        02:02.0 - 10b5:8518 - Bridge device
        08:00.0 - 1957:0040 - Processor
        07:00.0 - 10b5:8518 - Bridge device
        09:00.0 - 10b5:8112 - Bridge device
        07:01.0 - 10b5:8518 - Bridge device
        07:02.0 - 10b5:8518 - Bridge device
        06:00.0 - 10b5:8518 - Bridge device
        02:03.0 - 10b5:8518 - Bridge device
        01:00.0 - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b

Updated example:
  PCIE1: connected as Root Complex
        01:00.0 - 10b5:8518 - Bridge device
        02:01.0 - 10b5:8518 - Bridge device
        03:00.0 - 10b5:8112 - Bridge device
        04:01.0 - 8086:1010 - Network controller
        04:01.1 - 8086:1010 - Network controller
        02:02.0 - 10b5:8518 - Bridge device
        02:03.0 - 10b5:8518 - Bridge device
        06:00.0 - 10b5:8518 - Bridge device
        07:00.0 - 10b5:8518 - Bridge device
        08:00.0 - 1957:0040 - Processor
        07:01.0 - 10b5:8518 - Bridge device
        09:00.0 - 10b5:8112 - Bridge device
        07:02.0 - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11 years agopci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW
Peter Tyser [Fri, 29 Oct 2010 22:59:27 +0000 (17:59 -0500)]
pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW

This change does the following:
- Removes the printing of the PCI interrupt line value.  This is
  normally set to 0 by U-Boot on bootup and is rarely used during
  everyday operation.

- Prints out the PCI function number of a device.  Previously a device
  with multiple functions would be printed identically 2 times, which is
  generally confusing.  For example, on an Intel 2 port gigabit Ethernet
  card the following was displayed:
    ...
    04  01  8086  1010  0200  00
    04  01  8086  1010  0200  00
    ...

- Prints a text description of each device's PCI class instead of the
  raw PCI class code.  The textual description makes it much easier to
  determine what devices are installed on a PCI bus.

- Changes the general formatting of the PCI device output.

Previous output:
  PCIE1: connected as Root Complex
          04  01  8086  1010  0200  00
          04  01  8086  1010  0200  00
          03  00  10b5  8112  0604  00
          02  01  10b5  8518  0604  00
          02  02  10b5  8518  0604  00
          08  00  1957  0040  0b20  00
          07  00  10b5  8518  0604  00
          09  00  10b5  8112  0604  00
          07  01  10b5  8518  0604  00
          07  02  10b5  8518  0604  00
          06  00  10b5  8518  0604  00
          02  03  10b5  8518  0604  00
          01  00  10b5  8518  0604  00
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
          0d  00  1957  0040  0b20  00
  PCIE2: Bus 0c - 0d

Updated output:
  PCIE1: connected as Root Complex
          04:01.0 - 8086:1010 - Network controller
          04:01.1 - 8086:1010 - Network controller
          03:00.0 - 10b5:8112 - Bridge device
          02:01.0 - 10b5:8518 - Bridge device
          02:02.0 - 10b5:8518 - Bridge device
          08:00.0 - 1957:0040 - Processor
          07:00.0 - 10b5:8518 - Bridge device
          09:00.0 - 10b5:8112 - Bridge device
          07:01.0 - 10b5:8518 - Bridge device
          07:02.0 - 10b5:8518 - Bridge device
          06:00.0 - 10b5:8518 - Bridge device
          02:03.0 - 10b5:8518 - Bridge device
          01:00.0 - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
          0d:00.0 - 1957:0040 - Processor
  PCIE2: Bus 0c - 0d

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11 years agofsl_pci_init: Quiet scanning printf()
Peter Tyser [Fri, 29 Oct 2010 22:59:26 +0000 (17:59 -0500)]
fsl_pci_init: Quiet scanning printf()

The "Scanning PCI bus X" message doesn't provide any real useful
information, so remove it.

Original output:
  PCIE1: connected as Root Complex
             Scanning PCI bus 01
          04  01  8086  1010  0200  00
          04  01  8086  1010  0200  00
          03  00  10b5  8112  0604  00
          02  01  10b5  8518  0604  00
          02  02  10b5  8518  0604  00
          08  00  1957  0040  0b20  00
          07  00  10b5  8518  0604  00
          09  00  10b5  8112  0604  00
          07  01  10b5  8518  0604  00
          07  02  10b5  8518  0604  00
          06  00  10b5  8518  0604  00
          02  03  10b5  8518  0604  00
          01  00  10b5  8518  0604  00
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
             Scanning PCI bus 0d
          0d  00  1957  0040  0b20  00
  PCIE2: Bus 0c - 0d

Updated output:
  PCIE1: connected as Root Complex
          04  01  8086  1010  0200  00
          04  01  8086  1010  0200  00
          03  00  10b5  8112  0604  00
          02  01  10b5  8518  0604  00
          02  02  10b5  8518  0604  00
          08  00  1957  0040  0b20  00
          07  00  10b5  8518  0604  00
          09  00  10b5  8112  0604  00
          07  01  10b5  8518  0604  00
          07  02  10b5  8518  0604  00
          06  00  10b5  8518  0604  00
          02  03  10b5  8518  0604  00
          01  00  10b5  8518  0604  00
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
          0d  00  1957  0040  0b20  00
  PCIE2: Bus 0c - 0d

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: galak@kernel.crashing.org
11 years agompc85xx: Fix SERDES/eTSEC message indentation
Peter Tyser [Fri, 29 Oct 2010 22:59:25 +0000 (17:59 -0500)]
mpc85xx: Fix SERDES/eTSEC message indentation

Previously some mpc85xx boards printed indented messages such as the
following on bootup:
  printf("    eTSEC4 is in sgmii mode.\n");
  printf("    Serdes2 disalbed\n");

The bootup appearance looks cleaner if the indentation is removed which
aligns these messages with other bootup output.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: galak@kernel.crashing.org
11 years agofsl: Clean up printing of PCI boot info
Peter Tyser [Fri, 29 Oct 2010 22:59:24 +0000 (17:59 -0500)]
fsl: Clean up printing of PCI boot info

Previously boards used a variety of indentations, newline styles, and
colon styles for the PCI information that is printed on bootup.  This
patch unifies the style to look like:

...
NAND:  1024 MiB
PCIE1: connected as Root Complex
           Scanning PCI bus 01
        04  01  8086  1010  0200  00
        04  01  8086  1010  0200  00
        03  00  10b5  8112  0604  00
        02  01  10b5  8518  0604  00
        02  02  10b5  8518  0604  00
        08  00  1957  0040  0b20  00
        07  00  10b5  8518  0604  00
        09  00  10b5  8112  0604  00
        07  01  10b5  8518  0604  00
        07  02  10b5  8518  0604  00
        06  00  10b5  8518  0604  00
        02  03  10b5  8518  0604  00
        01  00  10b5  8518  0604  00
PCIE1: Bus 00 - 0b
PCIE2: connected as Root Complex
           Scanning PCI bus 0d
        0d  00  1957  0040  0b20  00
PCIE2: Bus 0c - 0d
In:    serial
...

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: wd@denx.de
CC: sr@denx.de
CC: galak@kernel.crashing.org
11 years agofsl_pci_init: Make fsl_pci_init_port() PCI/PCIe aware
Peter Tyser [Thu, 28 Oct 2010 20:24:59 +0000 (15:24 -0500)]
fsl_pci_init: Make fsl_pci_init_port() PCI/PCIe aware

Previously fsl_pci_init_port() always assumed that a port was a PCIe
port and would incorrectly print messages for a PCI port such as the
following on bootup:
    PCI1:  32 bit, 33 MHz, sync, host, arbiter
                Scanning PCI bus 00
    PCIE1 on bus 00 - 00

This change corrects the output of fsl_pci_init_port():
    PCI1:  32 bit, 33 MHz, sync, host, arbiter
                Scanning PCI bus 00
    PCI1 on bus 00 - 00

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11 years agonet: Fix potential empty DHCP Parameter Request List
Jason Liu [Sun, 14 Nov 2010 04:23:09 +0000 (12:23 +0800)]
net: Fix potential empty DHCP Parameter Request List

Can't get IP address with dhcp due to the dhcp server not
allow the empty param list request under some network env

This patch is based on Gray Remlin's initial patch.

Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Gray Remlin <g_remlin@rocketmail.com>
11 years agoenv_mmc: fix compile warning
Lei Wen [Tue, 9 Nov 2010 23:39:23 +0000 (07:39 +0800)]
env_mmc: fix compile warning

hexport would complain implicit declaration, if we don't add the
include file.

env_mmc.c: In function 'saveenv':
env_mmc.c:109: warning: implicit declaration of function 'hexport'

Signed-off-by: Lei Wen <leiwen@marvell.com>
11 years agotools/env: cleanup host build flags
Daniel Hobi [Wed, 10 Nov 2010 13:11:21 +0000 (14:11 +0100)]
tools/env: cleanup host build flags

This patch makes tools/env/Makefile more similar to tools/imls:
- define HOSTSRCS and HOSTCPPFLAGS, so that .depend generation works.
- include U-Boot headers using -idirafter to prevent picking up
  u-boot/include/errno.h.
- use HOSTCFLAGS_NOPED (fw_env.c does not conform to -pedantic).

In order to cross-compile tools/env, override the HOSTCC variable
as in this example:

  make tools env HOSTCC=bfin-uclinux-gcc

Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
Tested-by: Detlev Zundel <dzu@denx.de>
Tested-by: Steve Sakoman <steve.sakoman@linaro.org>
11 years agoPowerPC: Don't destroy fixup table while doing fixups
Joakim Tjernlund [Thu, 4 Nov 2010 18:02:00 +0000 (19:02 +0100)]
PowerPC: Don't destroy fixup table while doing fixups

The fixup procedure just stored a constant value in the
fixup table rather than just adjusting the table.
Although that doesn't seem to do any harm, it prevents
relocation more that once.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
11 years agonet: e1000: Add initialized eth_device & e1000_hw structure
Kumar Gala [Fri, 12 Nov 2010 10:13:06 +0000 (04:13 -0600)]
net: e1000: Add initialized eth_device & e1000_hw structure

nic and hw structures are allocated via malloc i.e. return memory
is not zero initialized. Because of this few structure member like
"function pointers" are initialized with garbage values.

It may cause problem. for eg. during eth_initialize, dev->write_hwaddr
is used.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Fixed typo.
Signed-off-by: Wolfgang Denk <wd@denx.de>
11 years agonet: uli526x: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:47 +0000 (14:03 +0900)]
net: uli526x: Add initialized eth_device structure

uli526x driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: tsi108_eth: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:46 +0000 (14:03 +0900)]
net: tsi108_eth: Add initialized eth_device structure

tsi108_eth driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: pcnet: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:45 +0000 (14:03 +0900)]
net: pcnet: Add initialized eth_device structure

pcnet driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: ns8382x: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:44 +0000 (14:03 +0900)]
net: ns8382x: Add initialized eth_device structure

ns8382x driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: natsemi: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:43 +0000 (14:03 +0900)]
net: natsemi: Add initialized eth_device structure

natsemi driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: fec_mxc: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:42 +0000 (14:03 +0900)]
net: fec_mxc: Add initialized eth_device structure

This prevents access to the member of eth_device which is not initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: eepro100: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:41 +0000 (14:03 +0900)]
net: eepro100: Add initialized eth_device structure

eepro100 driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: dc2114x: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:40 +0000 (14:03 +0900)]
net: dc2114x: Add initialized eth_device structure

dc2114x driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: rtl8139: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:39 +0000 (14:03 +0900)]
net: rtl8139: Add initialized eth_device structure

rtl8139 driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agonet: rtl8169: Add initialized eth_device structure
Nobuhiro Iwamatsu [Tue, 19 Oct 2010 05:03:38 +0000 (14:03 +0900)]
net: rtl8169: Add initialized eth_device structure

rtl8169 does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
11 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Fri, 12 Nov 2010 23:38:08 +0000 (00:38 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Fri, 12 Nov 2010 23:34:53 +0000 (00:34 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

11 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Fri, 12 Nov 2010 23:25:30 +0000 (00:25 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-ti
Wolfgang Denk [Fri, 12 Nov 2010 23:19:55 +0000 (00:19 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-ti

11 years agoMerge branch 'at91' of git://git.denx.de/u-boot-atmel
Wolfgang Denk [Fri, 12 Nov 2010 21:29:21 +0000 (22:29 +0100)]
Merge branch 'at91' of git://git.denx.de/u-boot-atmel

11 years agoMerge branch 'master' of /home/wd/git/u-boot/master
Wolfgang Denk [Fri, 12 Nov 2010 21:24:06 +0000 (22:24 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/master

11 years agoTQM85xx: Fix bug introduced by 83xx/85xx/86xx: LBC register cleanup
Becky Bruce [Thu, 11 Nov 2010 17:33:05 +0000 (11:33 -0600)]
TQM85xx: Fix bug introduced by 83xx/85xx/86xx: LBC register cleanup

The size of the other bank needed to be added to the br0 setting;
this got dropped in the LBC cleanup.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Tested-by: Wolfgang Denk <wd@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/corenet_ds: display the RCW at boot
Timur Tabi [Fri, 5 Mar 2010 21:29:26 +0000 (21:29 +0000)]
powerpc/corenet_ds: display the RCW at boot

Display the 64-byte Reset Configuration Word (RCW) during boot, so that
there's no confusion as to what RCW U-boot is using.

Reset Configuration Word (RCW):
       000000004a500000 00000000 18181818 00008888
       0000001028402400 00002000 fe800000 01200000
       0000002000000000 00000000 00000000 000b0000
       0000003000000000 00000000 00000000 00000000

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/p4080ds: Move ICS refclk define into P4080DS.h
Kumar Gala [Thu, 30 Sep 2010 20:47:16 +0000 (15:47 -0500)]
powerpc/p4080ds: Move ICS refclk define into P4080DS.h

We appear to have different refclk's on the different corenet DS boards
so move the define out of the common header.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/corenet_ds: Move CONFIG_SYS_TEXT_BASE into corenet_ds.h
Kumar Gala [Wed, 20 Oct 2010 21:02:41 +0000 (16:02 -0500)]
powerpc/corenet_ds: Move CONFIG_SYS_TEXT_BASE into corenet_ds.h

CONFIG_SYS_TEXT_BASE setting is common across the 'corenet_ds' board
family so move it out of P4080DS.h and into corenet_ds.h

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/corenet_ds: Enable DHCP suport
Kumar Gala [Wed, 10 Nov 2010 14:40:41 +0000 (08:40 -0600)]
powerpc/corenet_ds: Enable DHCP suport

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agop1_p2_rdb: to set SQW/INT pin of RTC as INT line
Priyanka Jain [Mon, 25 Oct 2010 09:22:53 +0000 (14:52 +0530)]
p1_p2_rdb: to set SQW/INT pin of RTC as INT line

SQW/INT pin in RTC can be used for generating square wave(by default) or
as interrupt line.  U-boot is registering this pin for interrupts.
Configuring SQW/INT bit as interrupt line during board initialization
to avoid spurious interrupts generated by square wave.

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/85xx: add CONFIG_SYS_TEXT_BASE_SPL for 85xx nand spl build
Haiying Wang [Wed, 10 Nov 2010 20:37:13 +0000 (15:37 -0500)]
powerpc/85xx: add CONFIG_SYS_TEXT_BASE_SPL for 85xx nand spl build

Introduce a SPL specific CONFIG_SYS_TEXT_BASE_SPL define to be used by
the linker.  This has similiar semantics to CONFIG_SYS_TEXT_BASE however
since SPL is a unqiue image we introduce a new variable to control its
text base address.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/85xx: rename CONFIG_SYS_TEXT_BASE to CONFIG_SYS_MONITOR_BASE
Haiying Wang [Wed, 10 Nov 2010 20:37:13 +0000 (15:37 -0500)]
powerpc/85xx: rename CONFIG_SYS_TEXT_BASE to CONFIG_SYS_MONITOR_BASE

Use CONFIG_SYS_MONITOR_BASE instead of CONFIG_SYS_TEXT_BASE in early
init code so we can share the same code with NAND or NOR boot and not
have additional ifdefs in here.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/85xx: Fix lds for nand build
Haiying Wang [Wed, 10 Nov 2010 19:32:36 +0000 (14:32 -0500)]
powerpc/85xx: Fix lds for nand build

Fix u-boot-nand.lds and u-boot-nand_spl.lds according to:

Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Sep 29 14:05:56 2010 -0500
commit fbe53f59bd40b3b1ab66dc98859e26589d64d1b7
    85xx: Use gc-sections to reduce image size

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/8xxx: Enable e1000 driver on some FSL boards
Kumar Gala [Wed, 10 Nov 2010 05:19:50 +0000 (23:19 -0600)]
powerpc/8xxx: Enable e1000 driver on some FSL boards

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agopowerpc/8xxx: Fix merge issue with P2020DS DDR2 build config
Kumar Gala [Wed, 10 Nov 2010 05:19:27 +0000 (23:19 -0600)]
powerpc/8xxx: Fix merge issue with P2020DS DDR2 build config

When P2020DS DDR2 was merged it was merged incorrectly and propogated to
boards.cfg.  Fix this by moving DDR2 config to be associated with
P2020DS and not P1_P2_RDB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11 years agosf: ramtron: new spi fram driver
Reinhard Meyer [Tue, 5 Oct 2010 14:56:40 +0000 (16:56 +0200)]
sf: ramtron: new spi fram driver

Supports most types that support Read-Id and the FM25H20.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11 years agoarmv7, beagle: Second SDRAM bank don;t work
Heiko Schocher [Thu, 4 Nov 2010 20:05:25 +0000 (16:05 -0400)]
armv7, beagle: Second SDRAM bank don;t work

since commit 3667cbeed5e3c4067e624e52a916b1ebb02c8f05
on beagle board the second sdram bank didn;t longer
work. Since this patch sdram settings just get copied
from bank a, but CMD_NOP, CMD_PRECHARGE, CMD_AUTOREFRESH
are not executed and after that mr register is also
not updated. This patch adds this for the bank b.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Steve Sakoman <steve@sakoman.com>
cc: Sandeep Paulraj <s-paulraj@ti.com>
cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoomap3evm: Fix mechanism to identify board revision
Sanjeev Premi [Thu, 4 Nov 2010 20:02:32 +0000 (16:02 -0400)]
omap3evm: Fix mechanism to identify board revision

Function omap3_evm_get_revision() - to identify the
board revision was called at end of setup_net_chip().

Board revision can be ascertained only by identifying
the Ethernet chipset - but combining setup operations
with revision detection isn't a good idea. So, moved
the function after call to setup_net_chip().

Function setup_net_chip() should be ideally be called
only when CONFIG_CMD_NET is defined. But this leaves
the board revision "undetected". This patch allows
static definition of revision or default fallback to
the latest revision.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoomap3evm: Wrap function under CONFIG_USB_OMAP3
Sanjeev Premi [Thu, 4 Nov 2010 20:02:29 +0000 (16:02 -0400)]
omap3evm: Wrap function under CONFIG_USB_OMAP3

The function omap3_evm_need_extvbus() is required
only when USB support is configured.

Wrapped this function in #ifdef CONFIG_USB_OMAP3.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoomap3evm: Support relocation
Sanjeev Premi [Thu, 4 Nov 2010 20:01:46 +0000 (16:01 -0400)]
omap3evm: Support relocation

This patch adds relocation support for omap3evm.
Content of the patch is based on changes for
Beagleboard.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoARMV7: OMAP3: Use generic mmc driver on OMAP3 IGEP module
Enric Balletbo i Serra [Thu, 4 Nov 2010 19:34:37 +0000 (15:34 -0400)]
ARMV7: OMAP3: Use generic mmc driver on OMAP3 IGEP module

This patch switches from the legacy mmc driver to the new generic mmc driver

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoARMV7: OMAP3: Use generic mmc driver on IGEP v2
Enric Balletbo i Serra [Thu, 4 Nov 2010 19:34:33 +0000 (15:34 -0400)]
ARMV7: OMAP3: Use generic mmc driver on IGEP v2

This patch switches from the legacy mmc driver to the new generic mmc driver

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agommc: Add multi-block read support to the generic mmc driver
Alagu Sankar [Mon, 25 Oct 2010 14:23:56 +0000 (07:23 -0700)]
mmc: Add multi-block read support to the generic mmc driver

This patch adds multi-block read support for the generic MMC
driver. Large reads are broken into chunks of 65535 blocks to
ensure that the code works with controllers having a 16 bit block counter.

This patch results in a significant performance improvement.

Time to read a 45 MB file went from 36 seconds to 9 seconds on Overo

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: Steve Sakoman <steve.sakoman@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agommc: Clean up generic mmc driver multi-block write functions
Steve Sakoman [Thu, 28 Oct 2010 16:00:26 +0000 (09:00 -0700)]
mmc: Clean up generic mmc driver multi-block write functions

The current mmc write implementation is type ulong, but returns int values.
Some of the printf's are terminated with /n/r, one has none.

This patch fixes these issues and also removes some unnecessary local
variables.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE
Steve Sakoman [Wed, 27 Oct 2010 12:04:30 +0000 (05:04 -0700)]
ARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE

This patch fixes the issue by defining and using CONFIG_SYS_INIT_RAM_SIZE and
CONFIG_SYS_INIT_RAM_ADDR. Based on an email discussion with Wolfgang Denk and
Heiko Schocher.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoARMV7: OMAP3: Add expansion board detection for Beagle
Koen Kooi [Mon, 20 Sep 2010 17:21:33 +0000 (10:21 -0700)]
ARMV7: OMAP3: Add expansion board detection for Beagle

Beagle expansion boards contain an i2c eeprom to identify themselves.
This patch adds code to read and parse the eeprom contents.  It prints
the expansion board name and revision and modifies environment variables
as appropriate. This patch is based on the Overo expansion board code.

Signed-off-by: Koen Kooi <k-kooi@ti.com>
Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoARMV7: OMAP3: Add expansion board detection for Overo
Steve Sakoman [Mon, 20 Sep 2010 15:05:14 +0000 (08:05 -0700)]
ARMV7: OMAP3: Add expansion board detection for Overo

Overo expansion boards contain an i2c eeprom to identify themselves.
This patch adds code to read and parse the eeprom contents.  It prints
the expansion board name and revision and modifies environment variables
as appropriate.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoARMV7: Fix build for non-OMAP3 boards
Steve Sakoman [Thu, 21 Oct 2010 05:00:00 +0000 (22:00 -0700)]
ARMV7: Fix build for non-OMAP3 boards

Commit c3d3a54 uses CONFIG_ARMV7 to determine whether to call the
v7_flush_cache_all function.  This breaks the build for all non-OMAP3
boards (like Panda and OMAP4430SDP) since there is only a v7_flush_cache_all
implementation for OMAP3.

This patch uses CONFIG_OMAP3XXX instead of CONFIG_ARMV7 so that only boards
with a v7_flush_cache_all will make the call.

Tested on Beagle, Overo, Panda, and OMAP4430SDP

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoARMV7: OMAP3: IGEP: Rename TEXT_BASE
Steve Sakoman [Thu, 21 Oct 2010 13:11:53 +0000 (06:11 -0700)]
ARMV7: OMAP3: IGEP: Rename TEXT_BASE

Commit 14d0a02a "Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE" missed the
IGEP boards since they were just added.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
11 years agoAT91: add header file for the Shutdown Controller
Reinhard Meyer [Mon, 25 Oct 2010 15:56:11 +0000 (17:56 +0200)]
AT91: add header file for the Shutdown Controller

and SHDWN address entry in at91sam9260.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
11 years agoAT91: add 2nd SPI to 9260/9XE/9G20
Reinhard Meyer [Mon, 25 Oct 2010 15:56:23 +0000 (17:56 +0200)]
AT91: add 2nd SPI to 9260/9XE/9G20

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
11 years agoenv_sf: remove warning introduced with last patch
Stefano Babic [Fri, 29 Oct 2010 09:49:45 +0000 (11:49 +0200)]
env_sf: remove warning introduced with last patch

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agoMerge branch 'master' of git://git.denx.de/u-boot-marvell
Wolfgang Denk [Fri, 29 Oct 2010 20:03:00 +0000 (22:03 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-marvell

Conflicts:
include/configs/km_arm.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
11 years agoMerge branch 'master' of git://git.denx.de/u-boot-imx
Wolfgang Denk [Fri, 29 Oct 2010 19:50:24 +0000 (21:50 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-imx

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-samsung
Wolfgang Denk [Fri, 29 Oct 2010 19:47:48 +0000 (21:47 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-samsung

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-blackfin
Wolfgang Denk [Fri, 29 Oct 2010 19:46:08 +0000 (21:46 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin

11 years agoMerge branch 'for-wd-master' of git://git.denx.de/u-boot-pxa
Wolfgang Denk [Fri, 29 Oct 2010 19:44:40 +0000 (21:44 +0200)]
Merge branch 'for-wd-master' of git://git.denx.de/u-boot-pxa

11 years agoDrop support for CONFIG_SKIP_RELOCATE_UBOOT
Wolfgang Denk [Thu, 28 Oct 2010 18:52:49 +0000 (20:52 +0200)]
Drop support for CONFIG_SKIP_RELOCATE_UBOOT

For ARM systems, before ELF relocation was introduced,
CONFIG_SKIP_RELOCATE_UBOOT coul be used to prevent *COPYING* the
U-Boot image from whereever it was loaded to it's link address
(CONFIG_SYS_TEXT_BASE).  The name was badly chosen, as no relocation
was performed at all, it was just a memcpy().

With ELF relocation, this does not work like that any more, and
related boards need to be fixed anyway.  So don't keep this relict any
longer.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
11 years agoDrop support for CONFIG_SYS_ARM_WITHOUT_RELOC
Wolfgang Denk [Thu, 28 Oct 2010 18:35:36 +0000 (20:35 +0200)]
Drop support for CONFIG_SYS_ARM_WITHOUT_RELOC

When this define was introduced, the idea was to provide a soft
migration path for ARM boards to get adapted to the new relocation
support.  However, other recent changes led to a different
implementation (ELF relocation), where this no longer works.  By now
CONFIG_SYS_ARM_WITHOUT_RELOC does not only not help any more, but it
actually hurts because it obfuscates the actual code by sprinkling it
with lots of dead and non-working debris.

So let's make a clean cut and drop CONFIG_SYS_ARM_WITHOUT_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
11 years agoReplace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
Wolfgang Denk [Thu, 28 Oct 2010 18:00:11 +0000 (20:00 +0200)]
Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC

By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
11 years agoKirkwood: bugfix: DRAM size initialization
Tanmay Upadhyay [Thu, 28 Oct 2010 14:36:22 +0000 (20:06 +0530)]
Kirkwood: bugfix: DRAM size initialization

If start of any DRAM bank is greater than total DDR size, remaining DDR banks' start address & size were left un-initialized in dram_init function. This could break other functions who uses array 'gd->bd->bi_dram'. Kirkwood network driver is one example. This also stops Linux kernel from booting.

v2 - Set start address also to 0. Without this Linux kernel couldn't
     boot up

Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
11 years agokirkwood: get rid of config.mk files
Prafulla Wadaskar [Wed, 27 Oct 2010 12:16:06 +0000 (17:46 +0530)]
kirkwood: get rid of config.mk files

After moving the definition of CONFIG_SYS_TEXT_BASE to the respective
board config files, all Marvell kirkwood board have just a single and
common entry in their config.mk files:

KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg

Replace the only reference to KWD_CONFIG in the top level Makefile by
an equivalent setting, and remove all kirkwood config.mk files.

Signed-off-by: Wolfgang Denk <wd at denx.de>
Cc: Prafulla Wadaskar <prafulla at marvell.com>
Cc: Siddarth Gore <gores at marvell.com>
Cc: Simon Kagstrom <simon.kagstrom at netinsight.net>
Cc: Heiko Schocher <hs at denx.de>
Cc: Eric Cooper <ecc at cmu.edu>
Acked-by: Wolfgang Denk <wd at denx.de>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
11 years agokirkwood: guruplug: Relocate NAND environment area
Gray Remlin [Thu, 28 Oct 2010 13:32:12 +0000 (19:02 +0530)]
kirkwood: guruplug: Relocate NAND environment area

Current default options increase u-boot size to overlap the location of the environment in NAND, move environment higher up

Signed-off-by: Gray Remlin <g_remlin@rocketmail.com>
11 years agomx51evk: support new relocation scheme
Shawn Guo [Thu, 28 Oct 2010 02:13:15 +0000 (10:13 +0800)]
mx51evk: support new relocation scheme

This patch is to fix build breakage and support new relocation
scheme for mx51evk.

- Correct IRAM base address and add size definition

  The IRAM starts from 0x1FFE0000 on final revsion i.mx51 than
  0x1FFE8000 which is for older revision.

- Include imx-regs.h in mx51evk.h

  Definitions like CSD0_BASE_ADDR and IRAM_BASE_ADDR can be
  referred to.

- Define CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE

  They are used to define init RAM layout.

- Remove comment for CONFIG_SYS_GBL_DATA_SIZE which has been
  buried by Wolfgang's commit below

  25ddd1fb: Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

Signed-off-by: Shawn Guo <shawn.gsc@gmail.com>
11 years agomx51evk: consolidate env for mmcboot and netboot
Shawn Guo [Mon, 25 Oct 2010 15:20:30 +0000 (23:20 +0800)]
mx51evk: consolidate env for mmcboot and netboot

This patch is to consolidate default mx51evk env for two primary
boot modes, mmcboot and netboot.

It also cleans some unused env like netdev, uboot and redundant
env like loadaddr since CONFIG_LOADADDR already defines it.

Signed-off-by: Shawn Guo <shawn.gsc@gmail.com>
11 years agomx51evk: Fix 2 hours reset issue
Shawn Guo [Wed, 27 Oct 2010 15:36:04 +0000 (23:36 +0800)]
mx51evk: Fix 2 hours reset issue

The mx51evk u-boot has an issue that system will get reset
every 2 hours.

MC13892 has an inside charge timer which expires in 120 minutes.
If ICHRG and CHGAUTOB are not set properly, this timer expiration
will get system power recycled.

Since mx51evk has no Li-Ion battery on board, the patch sets
ICHRG in externally powered mode and sets CHGAUTOB bit to avoid
automatic charging, so that system will not get reset by this
timer expiration.

The patch also corrects the bit field definition of register 48
(Charger 0) per latest MC13892 Reference Manual.

Signed-off-by: Shawn Guo <shawn.gsc@gmail.com>
11 years agoMX51: remove warning in clock.c
Stefano Babic [Thu, 28 Oct 2010 09:08:52 +0000 (11:08 +0200)]
MX51: remove warning in clock.c

The patch removes the warning:

clock.c:291: warning: initialization from incompatible pointer type

after  constification of args[]

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agoimx25: Fix reset
Matthias Weisser [Wed, 27 Oct 2010 14:34:38 +0000 (16:34 +0200)]
imx25: Fix reset

This patch fixes the reset command on imx25. The watchdog registers are 16
bits in size and not 32. This patch also adds the service register codes as
constants.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
11 years agoMX5:use common u-boot.lds of cpu layer
Jason Liu [Thu, 21 Oct 2010 01:11:47 +0000 (09:11 +0800)]
MX5:use common u-boot.lds of cpu layer

Remove u-boot.lds from mx5 and use the common u-boot.lds
of cpu layer. This patch also fix the building errors:

arch/arm/cpu/armv7/start.o: In function `_rel_dyn_start_ofs':
arch/arm/cpu/armv7/start.S:283: undefined reference to `__rel_dyn_start'
arch/arm/cpu/armv7/start.o: In function `_rel_dyn_end_ofs':
arch/arm/cpu/armv7/start.S:283: undefined reference to `__rel_dyn_end'
arch/arm/cpu/armv7/start.o: In function `_dynsym_start_ofs':
arch/arm/cpu/armv7/start.S:283: undefined reference to `__dynsym_start'

Signed-off-by: Jason Liu <r64343@freescale.com>
11 years agoMX51: add CONFIG_SYS_TEXT_BASE to vision2 board, use general ld script
Stefano Babic [Wed, 20 Oct 2010 07:23:06 +0000 (09:23 +0200)]
MX51: add CONFIG_SYS_TEXT_BASE to vision2 board, use general ld script

Recent patch changed TEXT_BASE to CONFIG_SYS_TEXT_BASE and
vision2 board was not updated.

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agoAdd generic support for samsung s3c2440
C Nauman [Tue, 26 Oct 2010 14:04:31 +0000 (23:04 +0900)]
Add generic support for samsung s3c2440

This patch adds generic support for the Samsung s3c2440 processor.

Global s3c24x0 changes to struct members converting from upper case to
lower case.

Signed-off-by: Craig Nauman <cnauman@diagraph.com>
Cc: kevin.morfitt@fearnside-systems.co.uk
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
11 years agoBlackfin: config.mk: drop manual stripping of config vars
Mike Frysinger [Tue, 19 Oct 2010 06:48:34 +0000 (02:48 -0400)]
Blackfin: config.mk: drop manual stripping of config vars

Now that the common code takes care of stripping away quotes and such
from numeric options, we no longer need to do so ourselves.  So drop
the custom code we have in the Blackfin config.mk.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11 years agoBlackfin: fix building after asm-offsets.h intro
Mike Frysinger [Thu, 28 Oct 2010 01:10:58 +0000 (21:10 -0400)]
Blackfin: fix building after asm-offsets.h intro

Since some of the defines in our config.h use the generated defines, we
need to include the generated header.  This fixes building of the Blackfin
start.S file (where the stack is setup).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>