karo-tx-uboot.git
8 years agoMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Albert ARIBAUD [Wed, 15 Jan 2014 14:18:04 +0000 (15:18 +0100)]
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

8 years agomx6: Add initial support for the Hummingboard solo
Fabio Estevam [Fri, 3 Jan 2014 17:55:58 +0000 (15:55 -0200)]
mx6: Add initial support for the Hummingboard solo

SolidRun has designed the Hummingboard board based on mx6q/dl/solo.

Add the initial support for the mx6 solo variant.

More information about this hardware can be found at:
http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware

(Carrier-One was the previous name of Hummingboard).

Based on the work from Jon Nettleton <jon.nettleton@gmail.com>.

Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
8 years agomx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()
Fabio Estevam [Fri, 3 Jan 2014 17:55:57 +0000 (15:55 -0200)]
mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()

Provide an argument to enable_fec_anatop_clock() to specify the clock frequency
that will be generated.

No changes are made to mx6slevk, which uses the default 50MHz fec clock.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
8 years agoarm: use canonical sub mnemonic
Andreas Bießmann [Wed, 27 Nov 2013 15:09:29 +0000 (16:09 +0100)]
arm: use canonical sub mnemonic

Building some arm boards with older binutils may produce errors like this:

---8<---
crt0.S: Assembler messages:
crt0.S:70: Error: register expected, not '#(184)' -- `sub sp,#(184)'
--->8---

Use canonical version of the subtract mnemonic to avoid those issues.

Reported-by: Alexey Smishlayev <alexey@xtech2.lv>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
8 years agoMerge 'u-boot-imx/master' into 'u-boot-arm/master'
Albert ARIBAUD [Tue, 14 Jan 2014 10:50:54 +0000 (11:50 +0100)]
Merge 'u-boot-imx/master' into 'u-boot-arm/master'

8 years agoarm: put .hash, .got.plt and .machine_param back in binaries
Albert ARIBAUD [Mon, 13 Jan 2014 13:57:05 +0000 (14:57 +0100)]
arm: put .hash, .got.plt and .machine_param back in binaries

Some targets will build fine but not boot if sections .hash and
.got.plt are not present in the binary. Add them back.

Also, Exynos machines require .machine_param section in SPL.
Add it.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Tested-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
8 years agomx1ads: remove board support
Albert ARIBAUD [Mon, 13 Jan 2014 20:06:17 +0000 (21:06 +0100)]
mx1ads: remove board support

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Stefano Babic <sbabic@denx.de>
8 years agomini2440: remove board support
Albert ARIBAUD [Mon, 13 Jan 2014 20:06:16 +0000 (21:06 +0100)]
mini2440: remove board support

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
8 years agoARM: pxa: Fix OneNAND window access on VPAC270
Marek Vasut [Wed, 25 Dec 2013 23:53:26 +0000 (00:53 +0100)]
ARM: pxa: Fix OneNAND window access on VPAC270

Access the OneNAND 1KiB window on the VPAC270 as an SRAM instead of accessing
it as a burst-RAM. This fixes a problem where the board failed to reboot
sometimes as the CPU couldn't start executing from the OneNAND 1KiB window.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
8 years agoARM: pxa: Fix OneNAND SPL builds
Marek Vasut [Wed, 25 Dec 2013 23:46:49 +0000 (00:46 +0100)]
ARM: pxa: Fix OneNAND SPL builds

The OneNAND SPL used on PXA is slightly obscure. Due to the OneNAND limitation,
where we have only the first 1KiB of the OneNAND available upon power-up as a
memory-mapped area, from which the CPU starts executing, we place only the most
essential code into this first 1KiB . This code copies the rest of the SPL into
SRAM and jumps to it. This code is stored in section .text.0 .

The rest of the SPL is stored in section .text.1 . When running the OBJCOPY on
the SPL, it will preserve only .text section, but the .text.0 and .text.1 are
stripped away from the result, thus making the SPL binary empty. The patch adds
additional -j parameters to the OBJCOPY for PXA during the SPL build, which will
preserve the .text.0 and .text.1 sections.

Moreover, this patch also adds missing functions into the .text.0 section, since
otherwise the PXA270 with 1KiB-window OneNAND won't be able to boot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
8 years agomx6slevk: Include "mx6_common.h"
Fabio Estevam [Thu, 9 Jan 2014 10:57:12 +0000 (08:57 -0200)]
mx6slevk: Include "mx6_common.h"

Include "mx6_common.h" so that some ARM errata are applied and also the
vddsoc regulator can be changed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
8 years agoimx6: make use of lldiv(..)
Christian Gmeiner [Wed, 8 Jan 2014 07:24:25 +0000 (08:24 +0100)]
imx6: make use of lldiv(..)

Commit 762a88ccf8540948fbf8c31b40a29d1e0684a25b introduces
a 64-bit division without using the lldiv() function,
which pulls in previously unused libgcc stuff.

Signed-off-by: Måns Rullgård <mans@mansr.com>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
8 years agowandboard: Set default environment to use zImage
John Weber [Mon, 6 Jan 2014 15:27:22 +0000 (13:27 -0200)]
wandboard: Set default environment to use zImage

Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.

The zImage works for FSL Linux's kernel fork versions 3.0.35, 3.10.9,
and 3.10.17; this also works fine for mainline kernels.

Signed-off-by: John Weber <rjohnweber@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
8 years agomx6sabresd: Add eMMC specific environment to allow U-Boot update
Otavio Salvador [Mon, 6 Jan 2014 15:27:20 +0000 (13:27 -0200)]
mx6sabresd: Add eMMC specific environment to allow U-Boot update

A new 'update_emmc_firmware' target is added to allow for easy U-Boot
update in the eMMC as it has secury boot partition and this needs
specific handling on how to program the specific partition.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
8 years agomx6slevk: Return from cpu_eth_init() directly
Fabio Estevam [Sat, 4 Jan 2014 19:36:33 +0000 (17:36 -0200)]
mx6slevk: Return from cpu_eth_init() directly

There is no need to print an error message when cpu_eth_init() fails because
net/eth.c already prints it.

In order to simplify the code, just return the value from cpu_eth_init(bis)
directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
8 years agomx6sabresd: Return from cpu_eth_init() directly
Fabio Estevam [Sat, 4 Jan 2014 19:36:32 +0000 (17:36 -0200)]
mx6sabresd: Return from cpu_eth_init() directly

There is no need to print an error message when cpu_eth_init() fails because
net/eth.c already prints it.

In order to simplify the code, just return the value from cpu_eth_init(bis)
directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
8 years agomx6qsabreauto: Return from cpu_eth_init() directly
Fabio Estevam [Sat, 4 Jan 2014 19:36:31 +0000 (17:36 -0200)]
mx6qsabreauto: Return from cpu_eth_init() directly

There is no need to print an error message when cpu_eth_init() fails because
net/eth.c already prints it.

In order to simplify the code, just return the value from cpu_eth_init(bis)
directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
8 years agomx6qarm2: Remove unneeded error message when cpu_eth_init() fails
Fabio Estevam [Sat, 4 Jan 2014 19:36:30 +0000 (17:36 -0200)]
mx6qarm2: Remove unneeded error message when cpu_eth_init() fails

There is no need to print an error message when cpu_eth_init() fails because
net/eth.c already prints it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
8 years agotitanium: Return from cpu_eth_init() directly
Fabio Estevam [Sat, 4 Jan 2014 19:36:29 +0000 (17:36 -0200)]
titanium: Return from cpu_eth_init() directly

There is no need to print an error message when cpu_eth_init() fails because
net/eth.c already prints it.

In order to simplify the code, just return the value from cpu_eth_init(bis)
directly.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefan Roese <sr@denx.de>
8 years agowandboard: Return from cpu_eth_init() directly
Fabio Estevam [Sat, 4 Jan 2014 19:36:28 +0000 (17:36 -0200)]
wandboard: Return from cpu_eth_init() directly

There is no need to print an error message when cpu_eth_init() fails because
net/eth.c already prints it.

In order to simplify the code, just return the value from cpu_eth_init(bis)
directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
8 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Tom Rini [Fri, 10 Jan 2014 15:56:00 +0000 (10:56 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.

Conflicts:
include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini <trini@ti.com>
8 years agodoc: Update the zynq u-boot status
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:31 +0000 (01:48 +0530)]
doc: Update the zynq u-boot status

Updated doc/README.zynq to current status

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Enable CONFIG_DEFAULT_DEVICE_TREE
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:30 +0000 (01:48 +0530)]
zynq: Enable CONFIG_DEFAULT_DEVICE_TREE

Enabled default dts files on respective pre-board config
files this is way MAKEALL will works. and it's upto user
to build specific dts by specifying at build time.

$ make zynq_zc70x_config
$ make -->  with default dts zynq-zc702.dts
or
$ make DEVICE_TREE=zynq-zc702 --> Same configuration with zynq-zc706.dts

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agodts: zynq: Add more zynq dts files
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:29 +0000 (01:48 +0530)]
dts: zynq: Add more zynq dts files

This patch adds initial dts support for supported
zynq boards.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq-common: Enable verified boot(RSA)
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:28 +0000 (01:48 +0530)]
zynq-common: Enable verified boot(RSA)

CONFIG_FIT_SIGNATURE - signature node support in FIT image
CONFIG_RSA - RSA lib support

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agogpio: zynq: Add dummy gpio routines
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:27 +0000 (01:48 +0530)]
gpio: zynq: Add dummy gpio routines

GPIO dummy routines are required for fdt build, may be removed
these dependencies once the u-boot fdt is fully optimized.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agodts: zynq: Add basic fdt support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:26 +0000 (01:48 +0530)]
dts: zynq: Add basic fdt support

This patch provides a basic fdt support for zynq u-boot.

zynq-7000.dtsi-> initial arch dts file
zynq-zed.dts -> initial zed board dts file
more devices should be added in subsequent patches.

u-boot build: once configuring of a board done
for building dtb with zynq-zed.dts as an input
zynq-uboot> make DEVICE_TREE=zynq-zed

Enabled CONFIG_OF_SEPARATE for building dtb separately.
There is a new binary called u-boot-dtb.bin which is a u-boot
with devicetree supported.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq-common: Define CONFIG_ENV_OVERWRITE
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:25 +0000 (01:48 +0530)]
zynq-common: Define CONFIG_ENV_OVERWRITE

Defined CONFIG_ENV_OVERWRITE, which allow to
overwrite serial baudrate and ethaddr.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq-common: Define flash env. partition
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:24 +0000 (01:48 +0530)]
zynq-common: Define flash env. partition

Last 128Kb sector of 1Mb flash is defined as u-boot
environment partition.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq-common: Change Env. Sector size to 128Kb
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:23 +0000 (01:48 +0530)]
zynq-common: Change Env. Sector size to 128Kb

Changed Env. Sector size from 0x10000 to 128Kb

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq-common: Define default environment
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:22 +0000 (01:48 +0530)]
zynq-common: Define default environment

Defined default env. for autoboot FIT image from
respective boot devices.

Default settings:
fit_image=fit.itb
load_addr=0x2000000
fit_size=0x800000
flash_off=0x100000
nor_flash_off=0xE2100000

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Add support to find bootmode
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:21 +0000 (01:48 +0530)]
zynq: Add support to find bootmode

Added support to find the bootmodes by reading
slcr bootmode register. this can be helpful to
autoboot the configurations w.r.t a specified bootmode.

Added this functionality on board_late_init as it's not
needed for normal initializtion part.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Add zynq_zc770 xm012 board support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:20 +0000 (01:48 +0530)]
zynq: Add zynq_zc770 xm012 board support

ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013

ZC770 XM012:
- 1GB DDR3
- 64MiB Numonyx NOR flash
- USB-UART

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Cc: Stefan Roese <sr@denx.de>
8 years agozynq: Add zynq_zc770 xm013 board support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:19 +0000 (01:48 +0530)]
zynq: Add zynq_zc770 xm013 board support

ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013

ZC770 XM013:
- 1GB DDR3
- 128 Mb Quad-SPI Flash(dual parallel)
- USB-UART

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Add zynq_zc770 xm010 board support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:18 +0000 (01:48 +0530)]
zynq: Add zynq_zc770 xm010 board support

ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013

ZC770 XM010:
- 1Gb DDR3
- 1Mb SST SPI flash
- 128 Mb Quad-SPI Flash
- 8 Mb SST SI flash
- Full size SD/MMC card cage
- 10/100/1000 Ethernet
- USB-UART

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Add zynq microzed board support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:17 +0000 (01:48 +0530)]
zynq: Add zynq microzed board support

MicroZed is a low-cost development board based on
the Xilinx Zynq-7000 All Programmable SoC.

APSOC:
- XC7Z010-1CLG400C
Memory:
- 1 GB of DDR3 SDRAM
- 128Mb of QSPI flash(S25FL128SAGBHI200)
- Micro SD card interface
Communication:
- 10/100/1000 Ethernet
- USB 2.0
- USB-UART
User I/O:
- 100 User I/O (50 per connector)
- Configurable as up to 48 LVDS pairs or 100 single-ended I/O
Misc:
- Xilinx PC4 JTAG configuration port
- PS JTAG pins accessible via Pmod
- 33.33 MHz oscillator
- User LED and push switch

For more info - http://zedboard.org/product/microzed

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: zc70x: Add Catalyst 24WC08 EEPROM config support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:16 +0000 (01:48 +0530)]
zynq: zc70x: Add Catalyst 24WC08 EEPROM config support

Adds configurations for Catalyst 24WC08 EEPROM, which
is present on the zynq boards.

Enable EEPROM support for zc70x boards.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq-common: Define exact TEXT_BASE
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:15 +0000 (01:48 +0530)]
zynq-common: Define exact TEXT_BASE

Defined TEXT_BASE for u-boot starts from 0x4000000
w.r.t zynq memory-map.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:14 +0000 (01:48 +0530)]
zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs

CONFIG_SYS_SDRAM_SIZE is specific to a board hence moved
to specific pre-config board files.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Add zynq zed board support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:13 +0000 (01:48 +0530)]
zynq: Add zynq zed board support

Zed is a complete development board based on the
Xilinx Zynq-7000 All Programmable SoC.

APSOC:
- XC7Z020-CLG484-1
Memory:
- 512 MB DDR3
- 256 Mb Quad-SPI Flash(
- Full size SD/MMC card cage
Connectivity:
- 10/100/1000 Ethernet
- USB OTG (Device/Host/OTG)
- USB-UART
Expansion:
- FMC (Low Pin Count)
- Pmod. headers (2x6)
Video/Display:
- HDMI output (1080p60 + audio)
- VGA connector
- 128 x 32 OLED
- User LEDs (9)
User inputs:
- Slide switches (8)
- Push button switches (7)
Audio:
- 24-bit stereo audio CODEC
- Stereo line in/out
- Headphone
- Microphone input
Analog:
- Xilinx XADC header
- Supports 4 analog inputs
- 2 Differential / 4 Single-ended
Debug:
- On-board USB JTAG programming port
- ARM Debug Access Port (DAP)

For more info - http://zedboard.org/product/zedboard

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Add zynq zc70x board support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:12 +0000 (01:48 +0530)]
zynq: Add zynq zc70x board support

The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded
processing includes ASIC and FPGA design.

ZC702-:

APSOC:
- XC7Z020-CLG484-1
Memory:
- DDR3 Component Memory 1GB
- 16MB Quad SPI Flash
- IIC - 1 KB EEPROM
Connectivity:
- Gigabit Ethernet GMII, RGMII and SGMII.
- USB OTG - Host USB
- IIC Bus Headers/HUB
- 1 CAN with Wake on CAN
- USB-UART
Video/Display:
- HDMI Video OUT
- 8X LEDs
Control & I/O:
- 3 User Push Buttons
- 2 User Switches
- 8 User LEDs

For more info on zc702 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

ZC706-:

APSOC:
- XC7Z045 FFG900 -2 AP SoC
Memory:
- DDR3 Component Memory 1GB (PS)
- DDR3 SODIM Memory 1GB (PL)
- 2X16MB Quad SPI Flash (dual parallel)
- IIC - 1 KB EEPROM
Connectivity:
- PCIe Gen2x4
- SFP+ and SMA Pairs
- GigE RGMII Ethernet (PS)
- USB OTG 1 (PS) - Host USB
- IIC Bus Headers/HUB (PS)
- 1 CAN with Wake on CAN (PS)
- USB-UART
Video/Display:
- HDMI 8 color RGB 4.4.4 1080P-60 OUT
- HDMI IN 8 color RGB 4.4.4
Control & I/O:
- 2 User Push Buttons/Dip Switch, 2 User LEDs
- IIC access to GPIO
- SDIO (SD Card slot)
- 3 User Push Buttons, 2 User Switches, 8 User LEDs

For more info on zc706 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agodoc: zynq: Add information on zynq u-boot
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:11 +0000 (01:48 +0530)]
doc: zynq: Add information on zynq u-boot

Information on zynq u-boot about
- zynq boards
- mainline status
- TODO

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq-common: Rename zynq with zynq-common
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:10 +0000 (01:48 +0530)]
zynq-common: Rename zynq with zynq-common

zynq.h -> zynq-common.h, zynq-common is Common
configuration options for all Zynq boards.

zynq.h is no longer exists hense removed from boards.cfg

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Add GEM0, GEM1 configs support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:09 +0000 (01:48 +0530)]
zynq: Add GEM0, GEM1 configs support

Zynq ethernet controller support two GEM's like
CONFIG_ZYNQ_GEM0 and CONFIG_ZYNQ_GEM1 enabled
both so-that the respective board will define
these macros based on their usage.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Add UART0, UART1 configs support
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:08 +0000 (01:48 +0530)]
zynq: Add UART0, UART1 configs support

Zynq uart controller support two serial ports like
CONFIG_ZYNQ_SERIAL_UART0 and CONFIG_ZYNQ_SERIAL_UART1
enabled both so-that the respective board will define
these macros based on their usage.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Enable cache options
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:07 +0000 (01:48 +0530)]
zynq: Enable cache options

- Enable cache command
- Turn-off L2 cache
- Turn-on D-cache

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Minor config cleanup
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:06 +0000 (01:48 +0530)]
zynq: Minor config cleanup

Cleanups mostly on:
- Add comments
- Re-order configs
- Remove #define CONFIG_ZYNQ_SDHCI

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Cleanup on memory configs
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:05 +0000 (01:48 +0530)]
zynq: Cleanup on memory configs

Cleanup on memory configuration options:
- Add comment
- Re-order configs

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Cleanup on miscellaneous configs
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:04 +0000 (01:48 +0530)]
zynq: Cleanup on miscellaneous configs

Cleanup on miscellaneous configurable options:
- Rename SYS_PROMPT as "zynq-uboot"
- Add comment
- Re-order configs

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Enable Boot FreeBSD/vxWorks
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:03 +0000 (01:48 +0530)]
zynq: Enable Boot FreeBSD/vxWorks

This enabled Boot FreeBSD/vxWorks from an ELF image support

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agozynq: Enable CONFIG_FIT_VERBOSE
Jagannadha Sutradharudu Teki [Wed, 8 Jan 2014 20:18:02 +0000 (01:48 +0530)]
zynq: Enable CONFIG_FIT_VERBOSE

Enabled fit_format_{error,warning}()

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
8 years agoarm: make 'MAKEALL -a' distinguish between arm and aarch64
Albert ARIBAUD [Fri, 10 Jan 2014 09:19:45 +0000 (10:19 +0100)]
arm: make 'MAKEALL -a' distinguish between arm and aarch64

The vexpress_aemv8a is the first aarch64 board in U-Boot.
As it was introduced, it gets built when "MAKEALL -a arm"
is invoked, and fails as this command is run with a 32-bit,
not 64-bit, toolchain as the cross-compiler.

Introduce 'aarch64' as a valid 'MAKEALL -a' argument, treated
as 'arm' for all other intents, and change the architecture
of the vexpress_aemv8a entry in boards.cfg from 'arm' to
'aarch64'.

8 years agoarmv8: Use __aarch64__ rather than CONFIG_ARM64 in some cases
Tom Rini [Thu, 9 Jan 2014 20:11:27 +0000 (15:11 -0500)]
armv8: Use __aarch64__ rather than CONFIG_ARM64 in some cases

The toolchain sets __aarch64__ for both LE and BE.  In the case of
posix_types.h we cannot reliably use config.h as that will lead to
problems.  In the case of byteorder.h it's clearer to check the EB flag
being set in either case instead.

Cc: David Feng <fenghua@phytium.com.cn>
Signed-off-by: Tom Rini <trini@ti.com>
Amended by Albert ARIBAUD <albert.u.boot@aribaud.net> to
actually remove the config.h include from the posix_types.h
files, with permission from Tom Rini.

8 years agoMerge branch 'master' of git://git.denx.de/u-boot-mmc
Tom Rini [Thu, 9 Jan 2014 16:05:32 +0000 (11:05 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-mmc

8 years agoMerge branch 'master' of git://git.denx.de/u-boot-sh
Tom Rini [Thu, 9 Jan 2014 16:04:53 +0000 (11:04 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-sh

8 years agoarm64: MAKEALL, filter armv8 boards from LIST_arm
David Feng [Sat, 14 Dec 2013 03:47:38 +0000 (11:47 +0800)]
arm64: MAKEALL, filter armv8 boards from LIST_arm

Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agoarm64: board support of vexpress_aemv8a
David Feng [Sat, 14 Dec 2013 03:47:37 +0000 (11:47 +0800)]
arm64: board support of vexpress_aemv8a

Signed-off-by: David Feng <fenghua@phytium.com.cn>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
8 years agoarm64: generic board support
David Feng [Sat, 14 Dec 2013 03:47:36 +0000 (11:47 +0800)]
arm64: generic board support

Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agoarm64: core support
David Feng [Sat, 14 Dec 2013 03:47:35 +0000 (11:47 +0800)]
arm64: core support

Relocation code based on a patch by Scott Wood, which is:
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agoarm64: Make checkarmreloc accept arm64 relocations
Scott Wood [Sat, 14 Dec 2013 03:47:34 +0000 (11:47 +0800)]
arm64: Make checkarmreloc accept arm64 relocations

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agoarm64: Turn u-boot.bin back into an ELF file after relocate-rela
Scott Wood [Sat, 14 Dec 2013 03:47:33 +0000 (11:47 +0800)]
arm64: Turn u-boot.bin back into an ELF file after relocate-rela

While performing relocations on u-boot.bin should be good enough for
booting on real hardware, some simulators insist on booting an ELF file
(and yet don't perform ELF relocations), so convert the relocated
binary back into an ELF file.  This can go away in the future if we
change relocate-rela to operate directly on the ELF file, or if and
when we stop caring about a simulator with this restriction.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agoarm64: Add tool to statically apply RELA relocations
Scott Wood [Sat, 14 Dec 2013 03:47:32 +0000 (11:47 +0800)]
arm64: Add tool to statically apply RELA relocations

ARM64 uses the newer RELA-style relocations rather than the older REL.
RELA relocations have an addend in the relocation struct, rather than
expecting the loader to read a value from the location to be updated.

While this is beneficial for ordinary program loading, it's problematic
for U-Boot because the location to be updated starts out with zero,
rather than a pre-relocation value.  Since we need to be able to run C
code before relocation, we need a tool to apply the relocations at
build time.

In theory this tool is applicable to other newer architectures (mainly
64-bit), but currently the only relocations it supports are for arm64,
and it assumes a 64-bit little-endian target.  If the latter limitation
is ever to be changed, we'll need a way to tell the tool what format
the image is in.  Eventually this may be replaced by a tool that uses
libelf or similar and operates directly on the ELF file.  I've written
some code for such an approach but libelf does not make it easy to poke
addresses by memory address (rather than by section), and I was
hesitant to write code to manually parse the program headers and do the
update outside of libelf (or to iterate over sections) -- especially
since it wouldn't get test coverage on things like binaries with
multiple PT_LOAD segments.  This should be good enough for now to let
the manual relocation stuff be removed from the arm64 patches.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agoadd weak entry definition
David Feng [Sat, 14 Dec 2013 03:47:31 +0000 (11:47 +0800)]
add weak entry definition

Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agocmd_pxe: remove compiling warnings
David Feng [Sat, 14 Dec 2013 03:47:30 +0000 (11:47 +0800)]
cmd_pxe: remove compiling warnings

Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agofdt_support: 64bit initrd start address support
David Feng [Sat, 14 Dec 2013 03:47:29 +0000 (11:47 +0800)]
fdt_support: 64bit initrd start address support

Signed-off-by: David Feng <fenghua@phytium.com.cn>
8 years agosocfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
Chin Liang See [Tue, 31 Dec 2013 00:26:14 +0000 (18:26 -0600)]
socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA

To add the DesignWare MMC driver support for Altera SOCFPGA. It
required information such as clocks and bus width from platform
specific files (SOCFPGA handoff files)

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
8 years agommc: add setdsr support
Markus Niebel [Mon, 16 Dec 2013 12:40:46 +0000 (13:40 +0100)]
mmc: add setdsr support

The eMMC and the SD-Card specifications describe the optional SET_DSR command.
During measurements at our lab we found that some cards implementing this feature
having really strong driver strengts per default. This can lead to voltage peaks
above the specification of the host on signal edges for data sent from a card to
the host.

Since availability of a given card type may be shorter than the time a certain
hardware will be produced it is useful to have support for this command (Alternative
would be changing termination resistors and adapting the driver strength of the
host to the used card.)

Following proposal for an implementation:

- new field that reflects CSD field DSR_IMP in struct mmc
- new field for design specific DSR value in struct mmc
- board code can set DSR value in mmc struct just after registering an controller
- mmc_startup sends the the stored DSR value before selecting a card, if DSR_IMP is set

Additionally the mmc command is extended to make is possible to play around with different
DSR values.

The concept was tested on a i.MX53 based platform using a Micron eMMC card where the default
DSR is 0x0400 (12mA) but in our design 0x0100 (0x0100) were enough. To use this feature for
instance on a mx53loco one have to add a call to mmc_set_dsr() in board_mmc_init() after
calling fsl_esdhc_initialize() for the eMMC.

Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
8 years agommc: Minor cleanup of sdhci.c
Darwin Rambo [Thu, 19 Dec 2013 23:13:25 +0000 (15:13 -0800)]
mmc: Minor cleanup of sdhci.c

Fixup prints to show where the print is done from, and
a few minor formatting/grammar issues.

Signed-off-by: Darwin Rambo <drambo@broadcom.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
8 years agommc/dwmmc: use bounce buffer for data exchange between CPU and MMC controller
Alexey Brodkin [Thu, 26 Dec 2013 11:29:07 +0000 (15:29 +0400)]
mmc/dwmmc: use bounce buffer for data exchange between CPU and MMC controller

Bounce buffer implementation takes care of proper data buffer alignemt
and correct flush/invalidation of data cache at once so we no longer
depend on input data variety and make sure CPU and MMC controller deal
with expected data in case of enabled data cache.

Bounce buffer requires to add its definition (CONFIG_BOUNCE_BUFFER) in
board configuration, otherwise corresponding library won't be compiled
and linker will fail to build resulting executable.

Difference since v1 - fixed compile-time warning with type casting to
"void *":

Slight edit to remove UTF8 characters in the commit message.

Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
====
passing argument 2 of 'bounce_buffer_start' discards 'const' qualifier
from pointer target type
====

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Amar <amarendra.xt@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Andy Fleming <afleming@gmail.com>
8 years agosh: sh2: Remove CONFIG_SH2A definition from asm/processor.h
Nobuhiro Iwamatsu [Thu, 9 Jan 2014 03:31:35 +0000 (12:31 +0900)]
sh: sh2: Remove CONFIG_SH2A definition from asm/processor.h

SH2 and SH2A use a common header. Both checks are not necessary.
This removes CONFIG_SH2A definition from asm/processor.h.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agosh: sh4: Remove CONFIG_SH4A definition from source code
Nobuhiro Iwamatsu [Thu, 9 Jan 2014 03:22:12 +0000 (12:22 +0900)]
sh: sh4: Remove CONFIG_SH4A definition from source code

SH4 and SH4A are compatible. But some instructions are different from these.
In Linux kernel, It is treated as a separate CPU, but for now, I think that
there is no need to divide especially in the U-Boot.

This removes CONFIG_SH4A definition from source code, SH4A is treated as SH4.
And this fix white space.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agosandbox: tpm: Fix nvwrite command
Che-Liang Chiou [Sun, 10 Nov 2013 17:27:08 +0000 (10:27 -0700)]
sandbox: tpm: Fix nvwrite command

The original codes misused recvbuf in source buffer instead of sendbuf,
and read from incorrect offset 14 instead of 22.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
8 years agosandbox: Add a prototype for cleanup_before_linux()
Simon Glass [Sun, 10 Nov 2013 17:27:07 +0000 (10:27 -0700)]
sandbox: Add a prototype for cleanup_before_linux()

This function is defined but has no prototype declaration. Add it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agosandbox: tpm: Add TPM emulation
Simon Glass [Sun, 10 Nov 2013 17:27:05 +0000 (10:27 -0700)]
sandbox: tpm: Add TPM emulation

Add a simple TPM emulator for sandbox. It only supports a small subset of
TPM operations. However, these are enough to perform common tasks.

Note this is an initial commit to get this working, but it could use
cleaning up (for example constants instead of open-coded values).

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
8 years agosandbox: Add facility to save/restore sandbox state
Simon Glass [Sun, 10 Nov 2013 17:27:04 +0000 (10:27 -0700)]
sandbox: Add facility to save/restore sandbox state

It is often useful to be able to save out the state from a sandbox test
run, for analysis or to restore it later to continue a test. Add generic
infrastructure for doing this using a device tree binary file. This is
a flexible tagged file format which is already supported by U-Boot, and
it supports hierarchy if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
8 years agosandbox: Allow reading/writing of RAM buffer
Simon Glass [Sun, 10 Nov 2013 17:27:03 +0000 (10:27 -0700)]
sandbox: Allow reading/writing of RAM buffer

It is useful to be able to save and restore the RAM contents of sandbox
U-Boot either for setting up tests, for later analysys, or for chaining
together multiple tests which need to keep the same memory contents.

Add a function to provide a memory file for U-Boot. This is read on
start-up and written when shutting down. If the file does not exist
on start-up, it will be created when shutting down.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agosandbox: Add -i option to enter interactive mode
Simon Glass [Sun, 10 Nov 2013 17:27:02 +0000 (10:27 -0700)]
sandbox: Add -i option to enter interactive mode

Normally when U-Boot starts with a command (-c option) it quits when the
command completes. Normally this is what is requires, since the test is
likely complete.

Provide an option to jump into the console instead, so that debugging or
other tasks may be performed before quitting.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agosandbox: Allow the console to work earlier
Simon Glass [Sun, 10 Nov 2013 17:27:01 +0000 (10:27 -0700)]
sandbox: Allow the console to work earlier

With sandbox, errors and problems may be reported before console_init_f()
is executed. For example, an argument may not parse correctly or U-Boot may
panic(). At present this output is swallowed so there is no indication what
is going wrong.

Adjust the console to deal with a very early sandbox setup, by detecting that
there is no global_data yet, and calling os functions in that case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agosandbox: Implement the bootm command for sandbox
Simon Glass [Sun, 10 Nov 2013 17:27:00 +0000 (10:27 -0700)]
sandbox: Implement the bootm command for sandbox

When sandbox does a 'bootm' to run a kernel we cannot actually execute it.
So just exit sandbox, which is essentially what U-Boot does on other archs.
Also, allow sandbox to use bootm on any kernel, so that it can be used
to test booting of kernels from any architecture.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agosandbox: Allow return from board_init_f()
Simon Glass [Sun, 10 Nov 2013 17:26:59 +0000 (10:26 -0700)]
sandbox: Allow return from board_init_f()

The execution flow becomes easier if we can return from board_init_f()
as ARM does. We can control things from start.c instead of having to
call back into that file from other places.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agosandbox: Correct help message <arg> garbling
Simon Glass [Sun, 10 Nov 2013 17:26:58 +0000 (10:26 -0700)]
sandbox: Correct help message <arg> garbling

The <arg> is displayed for options with no argument, and omitted for those
with an argument. Swap this around.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agosandbox: Improve/augment memory allocation functions
Simon Glass [Sun, 10 Nov 2013 17:26:57 +0000 (10:26 -0700)]
sandbox: Improve/augment memory allocation functions

Implement realloc() and free() for sandbox, by adding a header to each
block which contains the block size.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
8 years agosandbox: block driver using host file/device as backing store
Henrik Nordström [Sun, 10 Nov 2013 17:26:56 +0000 (10:26 -0700)]
sandbox: block driver using host file/device as backing store

Provide a way to use any host file or device as a block device in U-Boot.
This can be used to provide filesystem access within U-Boot to an ext2
image file on the host, for example.

The support is plumbed into the filesystem and partition interfaces.

We don't want to print a message in the driver every time we find a missing
device. Pass the information back to the caller where a message can be printed
if desired.

Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
- Removed change to part.c get_device_and_partition()

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
8 years agoAdd crc8 routine
Simon Glass [Sun, 10 Nov 2013 17:26:47 +0000 (10:26 -0700)]
Add crc8 routine

Add an implementation of the CRC8 algorithm. This is required by the TPM
emulation, but is probably useful to U-Boot in general.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
8 years agoMerge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Albert ARIBAUD [Wed, 8 Jan 2014 19:48:26 +0000 (20:48 +0100)]
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

8 years agoARM: omap5_uevm: Enable 8-bit eMMC access
Lubomir Popov [Thu, 19 Dec 2013 15:14:02 +0000 (17:14 +0200)]
ARM: omap5_uevm: Enable 8-bit eMMC access

All prerequisites are already available, so why not enable 8-bit
access - it is a matter of a define in the board file only.

Signed-off-by: Lubomir Popov <l-popov@ti.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
8 years agommc/dwmmc: Using calloc instead malloc
Chin Liang See [Wed, 18 Dec 2013 17:16:01 +0000 (11:16 -0600)]
mmc/dwmmc: Using calloc instead malloc

To enhance the SDMMC DesignWare driver to use calloc instead of
malloc. This will avoid the incident that uninitialized members
of mmc structure are later used for NULL comparison.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Andy Fleming <afleming@freescale.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
8 years agoinclude/mmc.h: Remove declaration for spl_mmc_load()
Lad, Prabhakar [Tue, 3 Dec 2013 06:47:34 +0000 (12:17 +0530)]
include/mmc.h: Remove declaration for spl_mmc_load()

The spl_mmc_load() was removed while converting to
CONFIG_SPL_FRAMEWORK usage the definition was removed
but the declaration was missed. This patch removes this
declaration.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
8 years agosh: sh2: Change CONFIG_SYS_HZ to CONFIG_SH_CMT_CLK_FREQ
Nobuhiro Iwamatsu [Wed, 8 Jan 2014 05:57:30 +0000 (14:57 +0900)]
sh: sh2: Change CONFIG_SYS_HZ to CONFIG_SH_CMT_CLK_FREQ

CONFIG_SYS_HZ of SH2 is not used as frequency of base timer. This is the
correct clock of CMT.
This changes from CONFIG_SYS_HZ to CONFIG_SH_CMT_CLK_FREQ, in order to use
CONFIG_SYS_HZ as clock of CMT.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
8 years agosh: sh4: remove CONFIG_SH4 definition from board config
Nobuhiro Iwamatsu [Wed, 8 Jan 2014 05:10:10 +0000 (14:10 +0900)]
sh: sh4: remove CONFIG_SH4 definition from board config

CONFIG_SH4 was already defined in arch/sh/sh4/config.mk.
This removes CONFIG_SH4 from board config files of SH4.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agosh: sh4: Add CONFIG_SH4 definition to config.mk of SH4
Nobuhiro Iwamatsu [Wed, 8 Jan 2014 05:09:32 +0000 (14:09 +0900)]
sh: sh4: Add CONFIG_SH4 definition to config.mk of SH4

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agosh: sh3: remove CONFIG_SH3 definition from board config
Nobuhiro Iwamatsu [Wed, 8 Jan 2014 04:51:07 +0000 (13:51 +0900)]
sh: sh3: remove CONFIG_SH3 definition from board config

CONFIG_SH3 was already defined in arch/sh/sh3/config.mk.
This removes CONFIG_SH3 from board config files of SH3.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agosh: sh3: Add CONFIG_SH3 definition to config.mk of SH3
Nobuhiro Iwamatsu [Wed, 8 Jan 2014 04:46:11 +0000 (13:46 +0900)]
sh: sh3: Add CONFIG_SH3 definition to config.mk of SH3

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agosh: sh2: remove CONFIG_SH2 definition from board config
Nobuhiro Iwamatsu [Wed, 8 Jan 2014 04:48:51 +0000 (13:48 +0900)]
sh: sh2: remove CONFIG_SH2 definition from board config

CONFIG_SH2 was already defined in arch/sh/sh2/config.mk.
This removes CONFIG_SH2 from board config files of SH2.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agosh: sh2: Add CONFIG_SH2 definition to config.mk of SH2
Nobuhiro Iwamatsu [Wed, 8 Jan 2014 04:46:06 +0000 (13:46 +0900)]
sh: sh2: Add CONFIG_SH2 definition to config.mk of SH2

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agosh: delete redundant CONFIG_SH definition
Masahiro Yamada [Mon, 6 Jan 2014 06:43:35 +0000 (15:43 +0900)]
sh: delete redundant CONFIG_SH definition

CONFIG_SH is defined in arch/sh/config.mk.
It is not necessary to define it in each board
header config header file.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8 years agoARM: dra7_evm: read mac address properly from e-fuse
Mugunthan V N [Tue, 7 Jan 2014 14:27:38 +0000 (19:57 +0530)]
ARM: dra7_evm: read mac address properly from e-fuse

Byte offset of Ethernet mac address read from e-fuse are wrong so DHCP is
not working on some boards, modifying the offset to read properly.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
8 years agoarm: omap: cm_t35: enable gpio bank 5 clocks explicitly
Nikita Kiryanov [Tue, 31 Dec 2013 10:55:15 +0000 (12:55 +0200)]
arm: omap: cm_t35: enable gpio bank 5 clocks explicitly

Following commit "arm: omap3: Enable clocks for peripherals only if they are
used" (f33b9bd3984fb11e1d8566a866adc5957b1e1c9d) it is now necessary to enable
clocks for GPIO banks explicitly. On cm_t35, GPIO bank 5 is necessary for
scf0403 lcd support.

Enable GPIO bank 5 clocks.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
8 years agoARM: twister: add missing gpio clock init
Jeroen Hofstee [Sat, 21 Dec 2013 17:06:33 +0000 (18:06 +0100)]
ARM: twister: add missing gpio clock init

Commit f33b9bd3984fb11e1d8566a866adc5957b1e1c9d breaks boards
which do not explicitly enable the gpio clocks. This causes
the twister spl to hang, since it uses the no longer enabled
gpio 55. Add CONFIG_OMAP3_GPIO_2 to unbrick the board.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Tapani Utriainen <tapani@technexion.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Acked-by: Stefano Babic <sbabic@denx.de>
8 years agoARM: tam3517-common: fix nand spl boot
Jeroen Hofstee [Sat, 21 Dec 2013 17:03:09 +0000 (18:03 +0100)]
ARM: tam3517-common: fix nand spl boot

commit f9095aac793aa8917ab9b915c5d449e6dc8d3d30, "mtd: nand:
omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme"
removed CONFIG_SPL_NAND_SOFTECC from the tam3517 common config,
causing the spl nand boot to fail. Add it back, so derived
boards boot again.

Cc: Pekon Gupta <pekon@ti.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Raphael Assenat <raph@8d.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tapani Utriainen <tapani@technexion.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Acked-by: Stefano Babic <sbabic@denx.de>