From 50ffb1174c2b392723dc51a78c179baed28d43b2 Mon Sep 17 00:00:00 2001
From: =?utf8?q?Andreas=20Bie=C3=9Fmann?= <andreas.devel@googlemail.com>
Date: Thu, 18 Apr 2013 22:48:46 +0000
Subject: [PATCH] microblaze: fix style in board.c
MIME-Version: 1.0
Content-Type: text/plain; charset=utf8
Content-Transfer-Encoding: 8bit

Make microblaze's board.c checkpatch clean.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

Reviewed-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/lib/board.c | 63 ++++++++++++++++++-------------------
 1 file changed, 31 insertions(+), 32 deletions(-)

diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 815fb5a0c9..3a6d81aa09 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -74,15 +74,15 @@ void board_init_f(ulong not_used)
 {
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
-	gd = (gd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
-	bd = (bd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
+	gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
+	bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET
 						- GENERATED_BD_INFO_SIZE);
 #if defined(CONFIG_CMD_FLASH)
 	ulong flash_size = 0;
 #endif
 	asm ("nop");	/* FIXME gd is not initialize - wait */
-	memset ((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
-	memset ((void *)bd, 0, GENERATED_BD_INFO_SIZE);
+	memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
+	memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
 	gd->bd = bd;
 	gd->baudrate = CONFIG_BAUDRATE;
 	bd->bi_baudrate = CONFIG_BAUDRATE;
@@ -108,57 +108,55 @@ void board_init_f(ulong not_used)
 	 * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
 	 * as our monitory code is run from SDRAM
 	 */
-	mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
+	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
 
 	serial_initialize();
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		WATCHDOG_RESET ();
-		if ((*init_fnc_ptr) () != 0) {
-			hang ();
-		}
+		WATCHDOG_RESET();
+		if ((*init_fnc_ptr) () != 0)
+			hang();
 	}
 
 #ifdef CONFIG_OF_CONTROL
 	/* For now, put this check after the console is ready */
-	if (fdtdec_prepare_fdt()) {
-		panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
-			"doc/README.fdt-control");
-	} else
+	if (fdtdec_prepare_fdt())
+		panic("** No FDT - please see doc/README.fdt-control");
+	else
 		printf("DTB: 0x%x\n", (u32)gd->fdt_blob);
 #endif
 
-	puts ("SDRAM :\n");
-	printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
-	printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
-	printf ("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
+	puts("SDRAM :\n");
+	printf("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
+	printf("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
+	printf("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
 
 #if defined(CONFIG_CMD_FLASH)
-	puts ("Flash: ");
+	puts("Flash: ");
 	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
 	flash_size = flash_init();
 	if (bd->bi_flashstart && flash_size > 0) {
 # ifdef CONFIG_SYS_FLASH_CHECKSUM
-		print_size (flash_size, "");
+		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
 		if (getenv_yesno("flashchecksum") == 1) {
-			printf ("  CRC: %08X",
-				crc32(0, (const u8 *)bd->bi_flashstart,
-							flash_size)
+			printf("  CRC: %08X",
+			       crc32(0, (const u8 *)bd->bi_flashstart,
+				     flash_size)
 			);
 		}
-		putc ('\n');
+		putc('\n');
 # else	/* !CONFIG_SYS_FLASH_CHECKSUM */
-		print_size (flash_size, "\n");
+		print_size(flash_size, "\n");
 # endif /* CONFIG_SYS_FLASH_CHECKSUM */
 		bd->bi_flashsize = flash_size;
 		bd->bi_flashoffset = bd->bi_flashstart + flash_size;
 	} else {
-		puts ("Flash init FAILED");
+		puts("Flash init FAILED");
 		bd->bi_flashstart = 0;
 		bd->bi_flashsize = 0;
 		bd->bi_flashoffset = 0;
@@ -166,10 +164,10 @@ void board_init_f(ulong not_used)
 #endif
 
 	/* relocate environment function pointers etc. */
-	env_relocate ();
+	env_relocate();
 
 	/* Initialize stdio devices */
-	stdio_init ();
+	stdio_init();
 
 	/* Initialize the jump table for applications */
 	jumptable_init();
@@ -193,13 +191,14 @@ void board_init_f(ulong not_used)
 
 	/* main_loop */
 	for (;;) {
-		WATCHDOG_RESET ();
-		main_loop ();
+		WATCHDOG_RESET();
+		main_loop();
 	}
 }
 
-void hang (void)
+void hang(void)
 {
-	puts ("### ERROR ### Please RESET the board ###\n");
-	for (;;) ;
+	puts("### ERROR ### Please RESET the board ###\n");
+	for (;;)
+		;
 }
-- 
2.39.2