]> git.kernelconcepts.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2014-10-24 Chen-Yu TsaiARM: sunxi: Allow specifying module in prcm apb0 init...
2014-10-24 Hans de GoedeARM: sunxi: Add support for R_PIO gpio banks
2014-10-24 Chen-Yu TsaiARM: sunxi: Add basic A23 support
2014-10-24 Chen-Yu Tsaimmc: sunxi: Add support for sun8i (A23)
2014-10-24 Chen-Yu TsaiARM: sunxi: Add support for uart0 on port F (mmc0)
2014-10-24 Chen-Yu TsaiARM: sunxi: Add sun8i (A23) UART0 pin mux support
2014-10-24 Chen-Yu TsaiARM: sunxi: Fix reset command on sun6i/sun8i
2014-10-24 Chen-Yu TsaiARM: sunxi: Add sun6i/sun8i timer block register definition
2014-10-24 Chen-Yu TsaiARM: sunxi: Move watchdog register definitions to separ...
2014-10-24 Chen-Yu TsaiARM: sunxi: Fix build break when CONFIG_MMC is not...
2014-10-24 Hans de Goedesunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i...
2014-10-24 Hans de Goedesunxi: Kconfig: Unify sunxi Kconfig code
2014-10-24 Hans de Goedesunxi: Enable second sdcard slot found on some boards
2014-10-24 Hans de Goedesunxi: Use PG3 - PG8 as io-pins for mmc1
2014-10-24 Hans de Goedesunxi: When we've both mmc0 and mmc2, detect from which...
2014-10-24 Hans de Goedesunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig...
2014-10-24 Hans de Goedesunxi: Add mmc card-detect functionality
2014-10-24 Chen-Yu TsaiARM: sun6i: Add Colombus board defconfig
2014-10-24 Maxime RipardARM: sunxi: Add basic A31 support
2014-10-24 Maxime RipardARM: sun6i: Setup the A31 UART0 muxing
2014-10-24 Chen-Yu TsaiARM: sun6i: Define UART0 pins for A31
2014-10-24 Hans de GoedeARM: sunxi-mmc: Add mmc support for sun6i / A31
2014-10-24 Chen-Yu TsaiARM: sun6i: Add clock support
2014-10-24 Oliver SchinaglARM: sun6i: Add support for the power reset control...
2014-10-24 Oliver SchinaglARM: sun6i: Add base address for the new controllers...
2014-10-24 Chen-Yu TsaiARM: sunxi: Fix build break when CONFIG_USB_EHCI is...
2014-10-24 Chen-Yu TsaiARM: sunxi: Use macro values for setting UART GPIO...
2014-10-24 Hans de Goedesunxi: Add support for the Mele M3 board
2014-10-24 Wills Wangmmc: sunxi: add SDHC support for sun6i/sun7i/sun8i
2014-10-24 Iain Patonsun7i: Add support for Olimex A20-OLinuXino-LIME2
2014-10-23 Masahiro Yamadakbuild: clear VENDOR variable to fix build error on...
2014-10-23 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2014-10-23 Masahiro Yamadamips: enable CONFIG_USE_PRIVATE_LIBGCC by default
2014-10-23 Masahiro Yamadakconfig: invoke silentoldconfig if spl, tpl/.config...
2014-10-23 Masahiro Yamadakbuild: fix a bug of the u-boot-spl link rule
2014-10-23 Masahiro Yamadakconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig
2014-10-23 Masahiro Yamadakbuild: drop CONFIG_USE_PRIVATE_LIBGCC=path/to/libgcc...
2014-10-23 Masahiro Yamadax86: set CONFIG_USE_PRIVATE_LIBGCC to y
2014-10-23 Masahiro Yamadakconfig: move CONFIG_SYS_HZ to lib/Kconfig
2014-10-23 Stefan RoeseMakefile: Add CONFIG_BUILD_TARGET to automatically...
2014-10-23 Stefan Roesetools: kwbimage: Add image version 1 support for Armada...
2014-10-23 Stefan Roesetools: Compile kwboot for Marvell Armada XP as those...
2014-10-23 Stefan Roesetools/kwboot: Sync with latest barebox version to suppo...
2014-10-23 Stefan Roesearm: kirkwood: Remove some dead code from cpu.c
2014-10-23 Stefan Roesearm: armada-xp: Add basic support for the maxBCM board
2014-10-23 Stefan Roesearm: armada-xp: Add basic support for the Marvell DB...
2014-10-23 Stefan Roesearm: armada-xp: Add basic support for Marvell Armada...
2014-10-23 Stefan Roesei2c: mvtwsi: Add support for Marvell Armada XP
2014-10-23 Stefan Roesenet: phy.h: Make PHY autonegotiation timeout configurable
2014-10-23 Stefan Roesenet: mvneta.c: Add support for the ethernet controller...
2014-10-23 Stefan Roesearm: kirkwood: Change naming of dram functions from...
2014-10-23 Stefan Roesespi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE
2014-10-23 Stefan Roesearm: marvell: Extract kirkwood gpio functions into...
2014-10-23 Stefan Roesespi: kirkwood_spi.c: Compile MPP (pin-mux) only for...
2014-10-23 Stefan Roesearm: mvebu: Add common mbus functions to use on Marvell...
2014-10-23 Stefan Roesearm: marvell: Rework timer.c to make it usable for...
2014-10-23 Stefan Roesearm: marvell: Move arch-kirkwood/spi.h to arch-mvebu...
2014-10-23 Stefan Roesearm: marvell: Move arch/kirkwood.h to arch/soc.h
2014-10-23 Stefan Roesearm: kirkwood: Move some SoC files into new arch/arm...
2014-10-23 Tom RiniMerge git://git.denx.de/u-boot-x86
2014-10-23 Tom RiniMerge git://git.denx.de/u-boot-fdt
2014-10-23 Simon Glassnet: Display the size when tftpboot finishes
2014-10-23 Simon Glassx86: Enable FIT, ELF on coreboot
2014-10-23 Simon Glassx86: config: link: Display the board model on the screen
2014-10-23 Simon Glassx86: link: Tidy up the command lines options
2014-10-23 Simon Glassdoc: Remove note about auto-complete not working with...
2014-10-23 Simon Glassx86: cros_ec: Enable cros_ec for link
2014-10-23 Simon Glassx86: cros_ec: Update LPC driver for new cros_ec header
2014-10-23 Simon Glassx86: dts: Add device tree compatible string for Intel IPC
2014-10-23 Simon Glassx86: Add device tree information for Chrome OS EC
2014-10-23 Simon Glassx86: config: Enable dhcp on link
2014-10-22 Thierry Redingfdt: Add a subnodes iterator macro
2014-10-22 Thierry Redingfdt: Add a function to return PCI BDF triplet
2014-10-22 Thierry Redingfdt: Add resource parsing functions
2014-10-22 Thierry Redingfdt: Add functions to retrieve strings
2014-10-22 Thierry Redingfdt: Add a function to get the index of a string
2014-10-22 Thierry Redingfdt: Add a function to count strings
2014-10-22 Tom RiniMerge git://git.denx.de/u-boot-dm
2014-10-22 Simon Glassdm: serial: Support driver model in pl01x driver
2014-10-22 Simon Glassdm: serial: Tidy up the pl01x driver
2014-10-22 Simon Glassdm: rpi: Convert GPIO driver to driver model
2014-10-22 Simon Glassdm: core: Add support for simple-bus
2014-10-22 Simon Glassdm: imx: Move cm_fx6 to use driver model for serial...
2014-10-22 Simon Glassdm: imx: serial: Support driver model in the MXC serial...
2014-10-22 Simon Glassdm: imx: gpio: Support driver model in MXC gpio driver
2014-10-22 Nikita Kiryanovarm: mx6: cm_fx6: use gpio request
2014-10-22 Simon Glassdm: imx: i2c: Use gpio_request() to request GPIOs
2014-10-22 Simon Glassimx: Add error checking to setup_i2c()
2014-10-22 Simon Glassdm: serial: Put common code into separate functions
2014-10-22 Simon Glassinitcall: Display error number when an error occurs
2014-10-22 Simon Glassdm: core: Allow a list of devices to be declared in...
2014-10-22 Simon Glassdm: linker_lists: Add a way to declare multiple objects
2014-10-22 Simon Glassdm: exynos: cros_ec: Move cros_ec_spi to driver model
2014-10-22 Simon Glassdm: sandbox: cros_ec: Move sandbox cros_ec to driver...
2014-10-22 Simon Glassdm: cros_ec: Add support for driver model
2014-10-22 Simon Glassdm: tegra: spi: Convert to driver model
2014-10-22 Simon Glassdm: tegra: dts: Add aliases for spi on tegra30 boards
2014-10-22 Simon Glassdm: sf: Add tests for SPI flash
2014-10-22 Simon Glassdm: spi: Add tests
2014-10-22 Simon Glassdm: exynos: config: Use driver model for SPI flash
next