karo-tx-uboot.git
2015-09-08 Gabriel Huaux86: minnowmax: initialize the pin-muxing from device...
2015-09-08 Gabriel Huaux86: gpio: add pinctrl support from the device tree
2015-09-08 Andrew Bradfordx86: baytrail: pci region 3 is not always mapped to...
2015-09-08 Bin Mengx86: qemu: Implement PIRQ routing
2015-09-08 Bin Mengx86: coreboot: Control I/O port 0xb2 writing via device...
2015-09-08 Bin Mengx86: qemu: Create separate i440fx and q35 device trees
2015-09-08 Bin Mengx86: coreboot: Fix cosmetic issues
2015-09-08 Bin Mengx86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSP
2015-09-08 Bin Mengtools: ifdtool: Do not write region while its size...
2015-09-08 Bin Mengx86: qemu: Adjust VGA initialization
2015-09-08 Bin Mengx86: qemu: Enable legacy IDE I/O ports decode
2015-09-08 Bin Mengx86: qemu: Turn on legacy segments decode
2015-09-08 Bin Mengx86: qemu: Make host bridge (b.d.f=0.0.0) visible
2015-09-08 Andrew Bradfordx86: fsp_support: Correct high mem comment typo
2015-09-08 Bin Mengx86: Do sanity test on pirq table before writing
2015-09-08 Bin Mengx86: quark: Implement PIRQ routing
2015-09-08 Bin Mengx86: Document irq router device tree bindings
2015-09-08 Bin Mengx86: Refactor PIRQ routing support
2015-09-08 Bin Mengx86: qemu: Add ATA/SATA support
2015-09-08 Bin Mengx86: Add CONFIG_LBA48 and remove CONFIG_ATAPI in x86...
2015-09-08 Bin Mengcmd_ide: Eliminate build warnings in atapi_inquiry()
2015-09-08 Bin Mengpci: Do not skip legacy IDE device configuration
2015-09-08 Bin Mengpci: Allow debug message output in pci_auto.c
2015-09-08 Bin Mengx86: qemu: Add graphics support
2015-09-08 Bin Mengx86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig
2015-09-08 Bin Mengvideo: Kconfig: Make VESA driver avaiable for non-x86...
2015-09-08 Bin Mengx86: Remove DECLARE_GLOBAL_DATA_PTR in board files
2015-09-08 Bin Mengx86: Update README.x86 for QEMU support
2015-09-08 Bin Mengx86: Change coreboot default build configuration to...
2015-09-08 Bin Mengx86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86...
2015-09-08 Bin Mengx86: Make QEMU the default vendor
2015-09-08 Bin Mengx86: Support QEMU x86 targets
2015-09-08 Bin Mengpci: Move pci_hose_phys_to_bus() to pci_common.c
2015-09-08 Hannes Schmelzerboard/BuR/common: fix netconsole
2015-09-08 Lars Poeschelconfigs: remove CONFIG_NET_MULTI
2015-09-08 Lars PoeschelARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ
2015-09-08 Michal Simeknet: Fix NET_RANDOM_ETHADDR dependencies
2015-09-08 Joe Hershbergernet: Move the CMD_NET config to defconfigs
2015-09-08 Joe HershbergerMove setexpr to Kconfig
2015-09-08 Masahiro Yamadablackfin: fix build error on bct-brettl2 board
2015-09-08 Masahiro Yamadasparc: fix build error on gr_ep2s60 board
2015-09-08 Markus Niebelarm: mx6: tqma6: use default CONFIG_SYS_PBSIZE
2015-09-08 Markus Niebelarm: mx6: tqma6: fix spelling error in condition
2015-09-08 Tim Harveyimx: ventana: skip mtdparts fixup if no flash
2015-09-08 Tim Harveyimx: ventana: hang if board model could not be determined
2015-09-08 Tim Harveyimx: ventana: make fdt_file1 and fdt_file2 automatic...
2015-09-08 Tim Harveyimx: ventana: make model env var automatic and non...
2015-09-08 Tim Harveyimx: ventana: various board-specific GPIO config updates
2015-09-08 Stefan Wahrenmxs: Do not disable bo detection when DC-DC is already...
2015-09-08 Nobuhiro Iwamatsuarm: rmobile: alt: Update to QoS revision 0.31 and...
2015-09-08 Nobuhiro Iwamatsuarm: rmobile: gose: Update to QoS revision 0.311
2015-09-08 Nobuhiro Iwamatsuarm: rmobile: koelsch: Update to QoS revision 0.411
2015-09-08 Nobuhiro Iwamatsuarm: rmobile: lager: Update to QoS revision 0.973
2015-09-08 Mitsuhiro Kimuraarm: rmobile: alt: Add ethernet function B support
2015-09-08 Masahiro YamadaARM: UniPhier: add pin mux setting for NAND CS1 of...
2015-09-08 Masahiro YamadaARM: UniPhier: fix pin mux setting for USB port 2 of...
2015-09-08 Masahiro YamadaARM: UniPhier: update DDR PHY register map for PH1...
2015-09-08 Masahiro YamadaARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDR
2015-09-08 Masahiro YamadaARM: UniPhier: set MACH_PH1_PRO4 as default SoC
2015-09-08 Masahiro YamadaARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig
2015-09-08 Masahiro YamadaARM: UniPhier: remove meaningless CONFIG_SPL_BUILD...
2015-09-08 Masahiro YamadaARM: UniPhier: remove unnecessary cache coherency code
2015-09-08 Masahiro YamadaARM: UniPhier: use 32 bit register access for debug...
2015-09-08 Masahiro YamadaARM: UniPhier: update the vendor name of UniPhier in...
2015-09-08 Masahiro YamadaARM: UniPhier: replace <asm/io.h> with <linux/io.h>
2015-09-08 Chen-Yu TsaiARM: sunxi: Enable PSCI for sun8i
2015-09-08 Chen-Yu TsaiARM: sunxi: Share sun6i PSCI backend with sun8i
2015-09-08 Chen-Yu TsaiARM: sunxi: Enable PSCI for sun6i
2015-09-08 Chen-Yu TsaiARM: sunxi: Add sun6i specific PSCI implementation
2015-09-08 Chen-Yu TsaiARM: sunxi: Make PSCI code sun7i specific
2015-09-08 Chen-Yu TsaiARM: sunxi: Document registers in PSCI code
2015-09-08 Daniel Kochmańskisunxi/nand: Add support to the SPL for loading u-boot...
2015-09-08 Roy Splietsunxi: Match sun4i, sun6i, sun9i CCI definitions for...
2015-09-08 Roy Splietsunxi: Add DMA definitions
2015-09-08 Daniel Kochmańskisunxi/nand: change BLOCK_SIZE in mksunxiboot to match...
2015-09-08 Hans de Goedesun9i: Add Merrii_A80_Optimus board / defconfig file
2015-09-08 Hans de Goedesun9i: Basic sun9i (A80) support
2015-09-08 Hans de Goedesunxi: Update sunxi-common.h to deal with different...
2015-09-08 Hans de Goedesunxi: Update sunxi-common.h to deal with different...
2015-09-08 Hans de Goedesunxi: Remove support for building "old-fashioned"...
2015-09-08 Hans de Goedesunxi: Use axp221 sid on a33
2015-09-08 Hans de Goedeusb: kbd: Fix key repeat not always working
2015-09-08 Peter Griffinusb: dwc2: Add support for v3 snpsid value
2015-09-08 Siva Durga... ci_udc: Update the ci_udc driver to support bulk transfers
2015-09-08 Hans de Goedeusb: Remove unused variable in usb_setup_descriptor()
2015-09-08 Hannes Schmelzercosmetic: change Author/MAINTAINER Name from Petermaier...
2015-09-08 Heiko Schocheram33xx, spl, siemens: enable debug uart output again
2015-09-08 Joe Hershbergernet: Fix a warning added by 76ec988
2015-09-08 Tang Yuantianfsl/sata: Replace sprintf() with snprintf()
2015-09-08 Matt Portergpio: stm32: add stm32f1 support
2015-09-08 Matt PorterARMv7M: add STM32F1 support
2015-09-08 Matt Portercommon/cmd_boot: keep ARM v7M in thumb mode during...
2015-09-08 Matt Porterimage: fix build when CONFIG_NR_DRAM_BANKS is disabled...
2015-09-08 Marek VasutARM: bcm283x: Switch to generic timer
2015-09-08 Marek VasutARM: bcm283x: Reorder timer.h
2015-09-08 Marek VasutARM: bcm283x: Repair wdog.h
2015-09-08 Linus Walleijvexpress64: use uncompressed kernel by default
2015-09-08 Masahiro Yamadakbuild: define DO_DEPS_ONLY for u-boot.cfg to fix build...
2015-09-08 Andrew Bradfordmeminfo cmd: Enable printing >=4GiB SDRAM sizes
2015-09-08 Paul Kocialkowskispl: spl_mmc: Error and count distinction
next