karo-tx-uboot.git
2013-02-23 Stefano BabicMerge branch 'master' of git://git.denx.de/u-boot-arm
2013-02-21 Albert ARIBAUDMerge branch 'u-boot-ti/master' into 'u-boot-arm/master'
2013-02-21 Albert ARIBAUDMerge 'u-boot-microblaze/mainline/arm' into 'u-boot...
2013-02-18 Tom Riniam335x evm: Add am335x_evm_spiboot target
2013-02-18 Ilya Yanokdoc/SPL/README.am335x-network: Document using ethernet...
2013-02-18 Chase Maupinam335x_evm: Add NET environment variables
2013-02-18 Chase Maupinam335x_evm: Add SPI environment variables
2013-02-18 Chase Maupinam335x_evm: Add NAND environment variables
2013-02-18 Michael Jonesomap3: mvblx: pass FPGA version to the kernel
2013-02-18 Michael Jonesomap3: mvblx: select fpgafilename according to orientation
2013-02-18 Howard Grayomap3: mvblx: change console to ttyO0 and make silent...
2013-02-18 Enric Balletbo... OMAP3: igep00x0: Add new IGEP COM PROTON.
2013-02-18 Enric Balletbo... OMAP3: igep00x0: add missing include mach-types.h
2013-02-18 Enric Balletbo... OMAP3: igep00x0: use official board names.
2013-02-18 Ilya Yanokam335x_evm: enable support for booting via USB
2013-02-18 Ilya Yanokam33xx: support for booting via usbeth
2013-02-18 Ilya Yanokspl: support for booting via usbeth
2013-02-18 Lars Poeschelam33xx: pcm051: Remove wp pin mux for sd-card
2013-02-18 robertcnelson... beagle: expansion boards: add LSR COM6L adapter
2013-02-18 robertcnelson... beagle: expansion boards: retry i2c_read with 16bit...
2013-02-18 Tomas Novotnyda8xx: Add the missing pinmux for da830 to the gpio...
2013-02-18 Tomas Novotnyda8xx: ea20: Add the configuration define for the exact...
2013-02-15 Tom RiniMerge branch 'fixes' of git://git.denx.de/u-boot-mips
2013-02-15 Daniel SchwierzeckMIPS: board.c: remove manual relocation of env_name_spec
2013-02-15 Simon Glassx86: Remove unused real mode code
2013-02-15 Simon Glassx86: Rename CONFIG_NO_X86_RESET_VECTOR to CONFIG_X86_RE...
2013-02-15 Simon Glassx86: Remove unneeded cruft from main Makefile
2013-02-15 Simon Glassx86: Remove sc520 cpu
2013-02-15 Simon Glassx86: Remove eNET boards
2013-02-13 Tom RiniMerge branch 'next' of git://git.denx.de/u-boot-mips
2013-02-12 Gabor JuhosMIPS: add dynamic relocation support
2013-02-12 Gabor JuhosMIPS: u-boot.lds: add relocation specific sections
2013-02-12 Daniel SchwierzeckMIPS: start.S: use symbol __image_copy_end for U-Boot...
2013-02-12 Daniel SchwierzeckMIPS: start.S: optimize BSS initialization
2013-02-12 Daniel SchwierzeckMIPS: board.c: switch to new symbols __bss_end and...
2013-02-12 Daniel SchwierzeckMIPS: u-boot.lds: introduce symbol __image_copy_end
2013-02-12 Daniel SchwierzeckMIPS: u-boot.lds: merge all BSS sections and introduce...
2013-02-12 Gabor JuhosMIPS: compute num_got_entries from .got section's size
2013-02-12 Daniel SchwierzeckMIPS: start.S: unify and simplify reset vector handling
2013-02-12 Daniel SchwierzeckMIPS: start.S: remove obsolete 64 bit handling in setup...
2013-02-12 Daniel SchwierzeckMIPS: xburst: fix broken access to global_data
2013-02-12 Tom Riniam335x_evm: Fix CPSW ethernet on GP EVM and EVM-SK
2013-02-12 Eric Nelsoni.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_M...
2013-02-12 Fabio Estevammx23evk: Turn on caches
2013-02-12 Fabio Estevammx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
2013-02-12 Otavio Salvadorbuild: imx: Fix 'u-boot.imx' build without full OBJTREE...
2013-02-12 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2013-02-12 Fabio Estevammx6: Disable Power Down Bit of watchdog
2013-02-12 Benoît Thébaudeauimx: mx6q DDR3 init: Benefit from available CL = 7
2013-02-12 Benoît Thébaudeauimx: mx6q DDR3 init: Fix MR0.PPD
2013-02-12 Benoît Thébaudeauimx: mx6q DDR3 init: Fix RST_to_CKE
2013-02-12 Benoît Thébaudeauimx: mx6q DDR3 init: Fix SDE_to_RST
2013-02-12 Benoît Thébaudeauimx: mx6q DDR3 init: Fix tXPR
2013-02-12 Benoît Thébaudeauimx: mx6q DDR3 init: Fix tMRD
2013-02-11 Lucas Stacharm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims...
2013-02-11 Tom WarrenTegra114: Add/enable Dalmore build (T114 reference...
2013-02-11 Tom WarrenTegra114: Add generic Tegra114 build support
2013-02-11 Tom WarrenTegra114: Dalmore: Add DT files
2013-02-11 Tom WarrenTegra114: Add common CPU (shared) files
2013-02-11 Tom WarrenTegra114: Add CPU (armv7) files
2013-02-11 Tom WarrenTegra114: Add AVP (arm720t) files
2013-02-11 Tom WarrenTegra114: Add arch-tegra114 include files
2013-02-11 Allen Martintegra: cardhu: config: enable SPI
2013-02-11 Allen Martintegra: add SPI SLINK driver
2013-02-11 Allen Martintegra: add addresses of SPI SLINK controllers
2013-02-11 Allen Martintegra30: fdt: add SPI SLINK nodes
2013-02-11 Allen Martintegra30: add SBC1 to periph id mapping table
2013-02-11 Allen Martintegra: spi: add fdt support to tegra SPI SFLASH driver
2013-02-11 Allen Martintegra20: fdt: add SPI SFLASH node
2013-02-11 Stephen Warrentegra: don't hard-code LCD into default TEGRA_DEVICE_SE...
2013-02-11 Stephen Warrentegra: rename FUNCMUX_UART2_UARTB
2013-02-11 Tom WarrenTegra: Move common clock code to arch/arm/cpu/tegra...
2013-02-11 Tom WarrenTegra: T20: Remove unused 'SLOW' SoC ID and PLLX table...
2013-02-11 Allen Martintegra: fdt: add back missing host1x node
2013-02-09 Gerald Van... Clean up libfdt.h includes
2013-02-08 Kim Phillipscommon/fdt_support.c: sparse fixes
2013-02-08 Kim Phillipslibfdt: update from upstream dtc commit 142419e
2013-02-08 Kim Phillipslibfdt: update fdt.h from upstream dtc
2013-02-08 Kim Phillipslibfdt_env.h: add fdt type definitions
2013-02-08 Kim Phillipstreewide: include libfdt_env.h before fdt.h
2013-02-08 Allen Martinfdt: fix dts preprocessor options
2013-02-07 Tom Riniam33xx: Drop gpio0_7_pin_mux from phytec pcm051
2013-02-07 Javier Martinez... OMAP3: igep00x0: fix a build warning on IGEP boards
2013-02-07 hvaibhav@ti.comAM335X: Set fdt_high for AM335X devices to enable booti...
2013-02-07 Jeff LanceAdd DDR3 support for AM335x-EVM (Version 1.5A)
2013-02-07 Lars Poeschelam335x: display msg when reading MAC from efuse
2013-02-07 Lars Poeschelpcm051: Add support for Phytec phyCORE-AM335x
2013-02-07 Lars Poeschelam33xx: add a pulldown macro to pinmux config
2013-02-07 Javier Martinez... omap4: allow the use of a plain text env file instead...
2013-02-07 Javier Martinez... OMAP3: igep00x0: add boot status GPIO LED
2013-02-07 Javier Martinez... OMAP3: use a single board file for IGEP devices
2013-02-07 Michal Simekarm: zynq: Add lowlevel initialization to C
2013-02-07 Michal Simekarm: zynq: Add SLCR support with system reset
2013-02-07 Michal Simekxilinx: zynq: Enable DCC and create new zynq_dcc board
2013-02-06 Jagannadha... sf: stmicro: Add support for N25Q256A
2013-02-06 Jagannadha... sf: stmicro: Add support for N25Q32A
2013-02-06 Jagannadha... sf: stmicro: Add support for N25Q32
2013-02-06 Jagannadha... sf: stmicro: Add support for N25Q64A
2013-02-06 Jagannadha... sf: winbond: Add W25Q64W
2013-02-06 Jagannadha... sf: spansion: Correct the first byte of idcode1 for...
next