]> git.kernelconcepts.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2015-04-10 Albert ARIBAUDMerge branch 'u-boot/master'
2015-04-08 Michal SimekARM: zynq: Remove Jagan from list of maintainers
2015-04-08 Masahiro YamadaARM: zynq: disable CONFIG_SYS_MALLOC_F to fix MMC boot
2015-04-07 Tom Rinicmd_mem.c: Update 'iteration_limit' to unsigned long
2015-04-07 Pavel Machekfix makefiles to respect DTC setting
2015-04-07 Masahiro YamadaMAKEALL: fix get_target_arch() to adjust to '-' in...
2015-04-07 Masahiro Yamadakbuild: include config.mk when auto.conf is not older...
2015-04-07 Tom Riniam33xx/ddr.c: Fix regression on DDR2 platforms
2015-04-07 Pavel Machekcmd_mem: cleanups, catch bad usage
2015-04-07 Tang Yuantianahci: Fix a wrong parameter pass
2015-04-07 Mario Schuknechtenv_sf: Fix recovery default
2015-04-06 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-samsung
2015-04-06 Łukasz Majewskiconfig: exynos: trats2: Enable support for Image.itb...
2015-04-06 Łukasz Majewskiconfig: exynos: trats: Enable support for Image.itb...
2015-04-06 Łukasz Majewskiconfig: exynos: common: Provide env variables to suppor...
2015-04-06 Ajay Kumarsmdk5420: Remove GPIO enums
2015-04-06 Ajay Kumardts: peach_pi: Add DT properties needed for display
2015-04-06 Ajay Kumardts: peach_pit: Add SLP and RST GPIO properties in...
2015-04-06 Ajay Kumardts: exynos54xx: Add samsung, pwm-out-gpio property...
2015-04-06 Ajay Kumarvideo: parade: configure SLP and RST GPIOs if specified...
2015-04-06 Ajay Kumarvideo: exynos_fb: configure backlight GPIOs if specifie...
2015-04-06 Ajay KumarExynos5: Fix rpll_sdiv to support both peach-pit and...
2015-04-06 Ajay Kumararm: exynos: add display clocks for Exynos5800
2015-04-06 Sjoerd Simonsconfig: peach: Correct memory layout environment settings
2015-04-06 Inha Songexynos5: add trace feature #ifdef in exynos5-common.h
2015-04-06 Guillaume GARDETExynos: Clock: Fix exynos5_get_periph_rate for I2C.
2015-04-04 Hans de Goedesunxi: Fix Orangepi_mini dtb filename
2015-04-03 Tom RiniMerge git://git.denx.de/u-boot-arc
2015-04-03 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2015-04-03 Alexey Brodkinboard: AXS10x - update SDIO clock value
2015-04-03 Alexey Brodkinarc: add support for SLC (System Level Cache, AKA L2...
2015-04-03 Alexey Brodkinboard: Switch Abilis TB-100 board to Driver Model for...
2015-04-03 Alexey Brodkinserial-arc: switch to DM
2015-04-03 Alexey Brodkinarc: minor fixes in Kconfig
2015-04-03 Alexey Brodkinarc: get rid of CONFIG_SYS_GENERIC_GLOBAL_DATA
2015-04-03 Alexey Brodkinarc: re-generate defconfigs
2015-04-03 Alexey Brodkinarc: clean-up init procedure
2015-04-03 Alexey Brodkinarc: move low-level interrupt and exception handlers...
2015-04-03 Alexey Brodkinarc: merge common start-up code between ARC and ARCv2
2015-04-03 Alexey Brodkinarc: cache - build invalidate_icache_all() and invalida...
2015-04-03 Alexey Brodkinserial/serial_arc: set registers address during compilation
2015-04-01 Tom RiniPrepare v2015.04-rc5
2015-03-31 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-atmel
2015-03-31 Wu, JoshARM: at91: sama5: move the common part of configuration...
2015-03-31 Bo ShenARM: atmel: at91sam9n12ek: enable spl support
2015-03-31 Bo ShenARM: atmel: at91sam9x5ek: enable spl support
2015-03-31 Bo ShenARM: atmel: at91sam9m10g45ek: enable spl support
2015-03-31 Bo ShenARM: atmel: arm926ejs: fix clock configuration
2015-03-31 Wu, JoshARM: at91: at91sam9n12ek: save the environment to a...
2015-03-31 David DueckARM: at91: atmel_nand: Support flash based BBT
2015-03-31 Heiko Schocherarm, at91: corvus: move MACH_TYPE to defconfig
2015-03-31 Tom Rinispl_atmel.c: Switch s_init to board_init_f
2015-03-31 Bo ShenARM: atmel: armv7: switch to use common timer functions
2015-03-31 Bo ShenARM: atmel: arm9: switch to use common timer functions
2015-03-31 Wu, JoshARM: at91: sama5d4: display the U-Boot version on LCD
2015-03-31 Tom RiniMerge git://git.denx.de/u-boot-nand-flash
2015-03-31 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-imx
2015-03-31 Stefan Agnermtd: vf610_nfc: specify transfer size before each transfer
2015-03-31 Stefan Agnermtd: vf610_nfc: mark page as dirty on block erase
2015-03-31 Peter Tysernand: yaffs: Remove the "nand write.yaffs" command
2015-03-31 Peter Tysernand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-31 Peter Tyserdfu: nand: Verify writes
2015-03-31 Peter Tysercmd_nand: Verify writes to NAND
2015-03-31 Peter Tysernand: Add verification functions
2015-03-31 Peter Tysernand: Remove unused read/write structures
2015-03-31 Peter Tysernand: Remove unused CONFIG_MTD_NAND_ECC_JFFS2 option
2015-03-31 Luca Elleromtd: nand: mxs: fix PIO_WORDs in mxs_nand_write_buf()
2015-03-31 Luca Elleromtd: nand: mxs: fix PIO_WORDs in mxs_nand_read_buf()
2015-03-30 Marcel ZiswilerARM: tegra: colibri_t20: fix nand pinmux
2015-03-30 Lucas Stachtegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
2015-03-30 Marcel ZiswilerARM: tegra: update colibri_t20 configuration
2015-03-30 Marcel ZiswilerARM: tegra: fix colibri_t20 asix reset
2015-03-30 Marcel ZiswilerARM: tegra: fix colibri_t20 machine type
2015-03-30 Marcel ZiswilerARM: tegra: rename colibri_t20 board/configuration...
2015-03-30 Marcel ZiswilerARM: tegra: get rid of colibri_t20-common
2015-03-30 Simon Glasstegra: seaboard: Correct the gpio_request() call
2015-03-30 Simon Glasstegra: seaboard: Remove unused CONFIG_UART_DISABLE_GPIO
2015-03-30 Stephen WarrenARM: tegra: enable MIPI PAD CTRL support for Tegra124
2015-03-30 Stephen WarrenARM: tegra: pinctrl: add support for MIPI PAD control...
2015-03-30 Stephen WarrenARM: tegra: pinctrl: minor cleanup
2015-03-30 Stephen WarrenARM: tegra: pinctrl: move Tegra210 code to the correct dir
2015-03-29 Axel Linspi: designware_spi: revisit FIFO size detection again
2015-03-29 Axel Linspi: cf_spi: Staticize local functions
2015-03-29 Axel Linspi: cf_spi: Use to_cf_spi_slave to resolve cfslave...
2015-03-29 Ravi Babuqspi: dra7x: enable quad mode read for ti-qspi driver
2015-03-29 Axel Linspi: ftssp010_spi: Use to_ftssp010_spi() to ensure...
2015-03-29 Axel Linspi: davinci: Remove duplicate code to set bus and...
2015-03-29 Axel Linspi: cf_qspi: Fixup to_cf_qspi_slave macro
2015-03-29 Hans de Goedesunxi: UTOO_P66: Add missing MAINTAINERS entry
2015-03-29 Iain Patonsunxi: a10-LIME set the cpu clock at boot to 912MHz
2015-03-29 Iain Patonsunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock
2015-03-29 Iain Patonsunxi: sun4i: improve cpu clock selection method
2015-03-29 Hans de Goedesunxi: musb: Fix some lo speed devices not working...
2015-03-28 Anatolij Gustschinpowerpc: ppc4xx: convert AMCC boards to generic board
2015-03-28 Brian McFarlandPatch to mkenvimage to handle text files with length...
2015-03-28 angelo@sysam.itm68k: fix 3 broken boards
2015-03-28 Alexey Brodkincommon/board_f: move board_init_f_mem() from #else...
2015-03-28 Linus Walleijvexpress64: cut config and defaults for unclear variant
2015-03-28 Linus Walleijarmv8: semihosting: delete external interface
2015-03-28 Linus Walleijvexpress64: remove board late init, use smhload
next