karo-tx-uboot.git
2014-10-10 Albert ARIBAUDMerge branch 'u-boot-samsung/master' into 'u-boot-arm...
2014-10-09 Nikita Kiryanovcompulab: eeprom: add default eeprom bus
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: r8a7794: Skip initialize L2 cache
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: r8a7791: Fix initialize L2 cache
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: Remove unnecessary initialization for...
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: lager: Fix CPU frequency setting
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: lager: Add Qos setting for ES2
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: lager: Update Qos setting to version...
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: alt: Update QoS initialization to version...
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: koelsch: Update QoS initialization to...
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLK
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLK
2014-10-09 Nobuhiro Iwamatsuarm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQ
2014-10-08 Albert ARIBAUDMerge remote-tracking branch 'u-boot-imx/master'
2014-10-08 Przemyslaw... odroid: clock: set aclk_cores to 200MHz
2014-10-08 Masahiro Yamadaexynos: update maintainer of Snow and SMDK5420 board
2014-10-08 Robert Baldygaarmv7: s5pc1xx: improve cache handling
2014-10-08 Simon Glassexynos: Enable pre-relocation malloc()
2014-10-08 Simon Glasssamsung: Enable device tree for smdkc100
2014-10-08 Simon Glasssamsung: Enable device tree for s5p_goni
2014-10-08 Simon Glassconfig: Move smdkv310 to use common exynos4 file
2014-10-08 Simon Glassconfig: Move arndale to use common exynos5250 file
2014-10-08 Simon Glassexynos: config: Move cros_ec and tps65090 out of smdk...
2014-10-08 Simon Glassexynos: Move common smdk5420 things to common file
2014-10-08 Simon Glassexynos: Move common exynos settings into a common file
2014-10-08 Simon Glassexynos: Rename -dt config files to -common
2014-10-08 Simon Glassexynos: dts: Add device tree node for cros_ec keyboard
2014-10-08 Simon Glassdm: exynos: Split out the cros_ec drivers
2014-10-08 Simon Glasscros_ec: exynos: Use the correct tps65090 driver in...
2014-10-08 Simon Glasscros_ec: power: Add a tunnelled version of the tps65090...
2014-10-08 Simon Glassexynos5: Enable data cache
2014-10-08 Simon GlassExynos: Use 900MHz ARM frequency in SPL for peach_pit
2014-10-07 Anthony Felicevf610twr: Tune DDR initialization settings
2014-10-07 Minkyu KangMerge branch 'uboot'
2014-10-07 Minkyu KangMerge branch 'master' of git.denx.de/u-boot-samsung
2014-10-07 Albert ARIBAUDMerge branch 'u-boot-marvell/master' into 'u-boot-arm...
2014-10-06 Kevin Mihelichnitrogen6x: config: enable EXT4 filesystem
2014-10-06 Eric Nelsonnitrogen6x: config: enable Android fastboot
2014-10-06 Eric Nelsonnitrogen6x: config: add gpio command
2014-10-06 Eric Nelsonnitrogen6x: config: disable logo
2014-10-06 Troy Kiskynitrogen6x: config: allow more bootargs parameters
2014-10-06 Eric Nelsonnitrogen6x: config: enable "i2c edid"
2014-10-06 Eric Nelsonnitrogen6x: config: add CONFIG_CMD_MEMTEST
2014-10-06 Eric Nelsonnitrogen6x: config: enable USB keyboard support
2014-10-06 Eric Nelsonnitrogen6x: config: expose SATA, then MMC over USB
2014-10-06 Eric Nelsonnitrogen6x: config: add initrd_high
2014-10-06 Kevin Mihelichnitrogen6x: config: use FS_GENERIC load command
2014-10-06 Diego Rondininitrogen6x: config: allow boot to USB stick
2014-10-06 Eric Nelsonnitrogen6x: config: add USB Mass Storage (ums) support
2014-10-06 Eric Nelsonnitrogen6x: display use I2C detect for HDMI
2014-10-06 Eric Nelsonnitrogen6x: display: add wvga-lvds panel
2014-10-06 Eric Nelsonnitrogen6x: display: add Ampire 1024x600 panel
2014-10-06 Eric Nelsonnitrogen6x: display: add svga display (800x600)
2014-10-06 Eric Nelsonnitrogen6x: display: add support for fusion 7 display
2014-10-06 Eric Nelsonnitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800...
2014-10-06 Eric Nelsonnitrogen6x: display: add support for LG-9.7 LVDS display
2014-10-06 Eric Nelsonnitrogen6x: display: add qvga panel
2014-10-06 Robert Winklernitrogen6x: display: add support lvds jeida screen
2014-10-06 Eric Nelsonnitrogen6x: prevent warnings about board_ehci* callbacks
2014-10-06 Troy Kiskynitrogen6x: phy: add 100 us delay after phy reset
2014-10-06 Eric Nelsonnitrogen6x: staticize board file
2014-10-06 Troy Kiskynitrogen6x: configure SGTL5000, CSI camera clock outputs
2014-10-06 Eric Nelsonnitrogen6x: power-down miscellanous peripherals
2014-10-06 Eric Nelsonnitrogen6x: configure SD2 pads for SDIO on USDHC2
2014-10-06 Troy Kiskynitrogen6x: simplify board_mmc_getcd
2014-10-06 Eric Nelsonnitrogen6x: implement board_cfb_skip() to disable text...
2014-10-06 Christian Gmeinerimx6: add Bachmann OT1200 board
2014-10-06 Marek Vasutarm: m53evk: Zap superfluous tab in env
2014-10-06 Marek Vasutarm: m28evk: Zap superfluous tab in env
2014-10-06 Eric Nelsonnitrogen6x: Update DDR timings for 2G memory arrangement
2014-10-06 Fabio Estevammx6sxsabresd: Fix PCI reset and power GPIO assignments
2014-10-06 Michael Wallelsxl: convert to generic board and fix typo
2014-10-05 Masahiro Yamadagit-mailrc: add me as a maintainer of UniPhier platform
2014-10-05 Masahiro YamadaMAINTAINERS: add me as a maintainer of UniPhier platform
2014-10-05 Masahiro YamadaARM: UniPhier: add Kconfig and defconfig
2014-10-05 Masahiro YamadaARM: UniPhier: add UniPhier SoC support code
2014-10-05 Masahiro Yamadaserial: add UniPhier serial driver
2014-10-05 Masahiro Yamadamtd: denali: add Denali NAND driver for SPL
2014-10-05 Masahiro Yamadamtd: denali: add Denali controller configs to Kconfig
2014-10-01 DrEagleARM: sheevaplug: add HUSH parser
2014-10-01 DrEagleARM: sheevaplug: redefine MTDPARTS
2014-10-01 DrEagleARM: sheevaplug: add MTD defaults
2014-10-01 DrEagleARM: sheevaplug: add MVSATA driver
2014-10-01 DrEagleARM: sheevaplug: change env location
2014-10-01 Fabio Estevamwandboard: Select CONFIG_CMD_FUSE
2014-10-01 Stefan RoeseARM: mx6: gw_ventana: Remove superfluous memset of...
2014-10-01 Nitin Gargimx6sx: Fix i.MX6SX HAB api function table offset
2014-09-30 Ye.Liimx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2...
2014-09-30 Ye.Liimx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
2014-09-29 Marek Vasutarm: m53evk: Enable FS_GENERIC
2014-09-29 Marek Vasutarm: m28evk: Enable FS_GENERIC
2014-09-29 Marek Vasutarm: m53evk: Test if bootscript exists before loading it
2014-09-29 Marek Vasutarm: m28evk: Test if bootscript exists before loading it
2014-09-29 Ye.Liusb: ehci-mx6: Rename the USB register base address
2014-09-29 Ye.Liimx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk...
2014-09-29 Ye.Liimx: mx6qarm2: Change the mmcroot and mmcpart env value
2014-09-29 Ye.Liimx: mx6qarm2: Add the kernel FDT Loading support
2014-09-29 Marek Vasutarm: mxs: olinuxino: Fine-tune DRAM configuration
2014-09-29 Marek Vasutarm: mxs: olinuxino: Enable USB only when needed
2014-09-29 Marek Vasutarm: mxs: Wait for DRAM to start
next