board: karo: enable CONFIG_FAT_WRITE for all modules

[karo-tx-uboot.git] / doc / README.NetConsole

diff --git a/doc/README.NetConsole b/doc/README.NetConsole
index c8bcb90a392103a4da06f4ccd0284d07d7edb4c5..af7fc6043a3f3f02497f7527342b18551402be9d 100644 (file)
--- a/doc/README.NetConsole
+++ b/doc/README.NetConsole
@@ -6,11 +6,16 @@ serial and network input/output devices by adjusting the 'stdin' and
 set either of these variables to "nc". Input and output can be
 switched independently.
 
 set either of these variables to "nc". Input and output can be
 switched independently.
 

+CONFIG_NETCONSOLE_BUFFER_SIZE - Override the default buffer size
+

 We use an environment variable 'ncip' to set the IP address and the
 port of the destination. The format is <ip_addr>:<port>. If <port> is
 omitted, the value of 6666 is used. If the env var doesn't exist, the
 broadcast address and port 6666 are used. If it is set to an IP
 address of 0 (or 0.0.0.0) then no messages are sent to the network.
 We use an environment variable 'ncip' to set the IP address and the
 port of the destination. The format is <ip_addr>:<port>. If <port> is
 omitted, the value of 6666 is used. If the env var doesn't exist, the
 broadcast address and port 6666 are used. If it is set to an IP
 address of 0 (or 0.0.0.0) then no messages are sent to the network.

+The source / listening port can be configured separately by setting
+the 'ncinport' environment variable and the destination port can be
+configured by setting the 'ncoutport' environment variable.

 
 For example, if your server IP is 192.168.1.1, you could use:
 
 
 For example, if your server IP is 192.168.1.1, you could use: