#
-# (C) Copyright 2000-2011
+# (C) Copyright 2000-2013
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# SPDX-License-Identifier: GPL-2.0+
#
-VERSION = 2011
-PATCHLEVEL = 09
+VERSION = 2013
+PATCHLEVEL = 07
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
else
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
endif
-TIMESTAMP_FILE = $(obj)include/generated/timestamp_autogenerated.h
-VERSION_FILE = $(obj)include/generated/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/x86/ \
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
-# Set shell to bash if possible, otherwise fall back to sh
-SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
- else if [ -x /bin/bash ]; then echo /bin/bash; \
- else echo sh; fi; fi)
-
-export HOSTARCH HOSTOS SHELL
+export HOSTARCH HOSTOS
# Deal with colliding definitions from tcsh etc.
VENDOR=
endif
endif
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of re-compiled files.
+#
+# See the linux kernel file "Documentation/sparse.txt" for more details,
+# including where to get the "sparse" utility.
+
+ifdef C
+ifeq ("$(origin C)", "command line")
+CHECKSRC := $(C)
+endif
+endif
+ifndef CHECKSRC
+ CHECKSRC = 0
+endif
+export CHECKSRC
+
ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)
-# Attempt to create a output directory.
+# Attempt to create an output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
# Verify if it was successful.
endif
export obj src
+TIMESTAMP_FILE = $(obj)include/generated/timestamp_autogenerated.h
+VERSION_FILE = $(obj)include/generated/version_autogenerated.h
+
# Make sure CDPATH settings don't interfere
unexport CDPATH
# load other configuration
include $(TOPDIR)/config.mk
+# Targets which don't build the source code
+NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
+
+# Only do the generic board check when actually building, not configuring
+ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
+ifeq ($(findstring _config,$(MAKECMDGOALS)),)
+$(CHECK_GENERIC_BOARD)
+endif
+endif
+
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
# standard location.
+LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT))
+
ifndef LDSCRIPT
#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
ifdef CONFIG_SYS_LDSCRIPT
endif
endif
+# If there is no specified link script, we look in a number of places for it
ifndef LDSCRIPT
ifeq ($(CONFIG_NAND_U_BOOT),y)
LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
endif
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
+ # We don't expect a Makefile here
+ LDSCRIPT_MAKEFILE_DIR =
+ endif
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
endif
# U-Boot objects....order is important (i.e. start must be first)
OBJS = $(CPUDIR)/start.o
-ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
-endif
ifeq ($(CPU),ppc4xx)
OBJS += $(CPUDIR)/resetvec.o
endif
OBJS := $(addprefix $(obj),$(OBJS))
-LIBS = lib/libgeneric.o
-LIBS += lib/lzma/liblzma.o
-LIBS += lib/lzo/liblzo.o
-LIBS += lib/zlib/libz.o
-LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
- "board/$(VENDOR)/common/lib$(VENDOR).o"; fi)
-LIBS += $(CPUDIR)/lib$(CPU).o
+HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
+
+LIBS-y += lib/libgeneric.o
+LIBS-y += lib/rsa/librsa.o
+LIBS-y += lib/lzma/liblzma.o
+LIBS-y += lib/lzo/liblzo.o
+LIBS-y += lib/zlib/libz.o
+LIBS-$(CONFIG_TIZEN) += lib/tizen/libtizen.o
+LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o
+LIBS-y += $(CPUDIR)/lib$(CPU).o
ifdef SOC
-LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o
+LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o
endif
ifeq ($(CPU),ixp)
-LIBS += arch/arm/cpu/ixp/npe/libnpe.o
-endif
-ifeq ($(CONFIG_OF_EMBED),y)
-LIBS += dts/libdts.o
-endif
-LIBS += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
- fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
- fs/ubifs/libubifs.o
-LIBS += net/libnet.o
-LIBS += disk/libdisk.o
-LIBS += drivers/bios_emulator/libatibiosemu.o
-LIBS += drivers/block/libblock.o
-LIBS += drivers/dma/libdma.o
-LIBS += drivers/fpga/libfpga.o
-LIBS += drivers/gpio/libgpio.o
-LIBS += drivers/hwmon/libhwmon.o
-LIBS += drivers/i2c/libi2c.o
-LIBS += drivers/input/libinput.o
-LIBS += drivers/misc/libmisc.o
-LIBS += drivers/mmc/libmmc.o
-LIBS += drivers/mtd/libmtd.o
-LIBS += drivers/mtd/nand/libnand.o
-LIBS += drivers/mtd/onenand/libonenand.o
-LIBS += drivers/mtd/ubi/libubi.o
-LIBS += drivers/mtd/spi/libspi_flash.o
-LIBS += drivers/net/libnet.o
-LIBS += drivers/net/phy/libphy.o
-LIBS += drivers/pci/libpci.o
-LIBS += drivers/pcmcia/libpcmcia.o
-LIBS += drivers/power/libpower.o
-LIBS += drivers/spi/libspi.o
+LIBS-y += drivers/net/npe/libnpe.o
+endif
+LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
+LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
+LIBS-y += fs/libfs.o \
+ fs/cbfs/libcbfs.o \
+ fs/cramfs/libcramfs.o \
+ fs/ext4/libext4fs.o \
+ fs/fat/libfat.o \
+ fs/fdos/libfdos.o \
+ fs/jffs2/libjffs2.o \
+ fs/reiserfs/libreiserfs.o \
+ fs/sandbox/libsandboxfs.o \
+ fs/ubifs/libubifs.o \
+ fs/yaffs2/libyaffs2.o \
+ fs/zfs/libzfs.o
+LIBS-y += net/libnet.o
+LIBS-y += disk/libdisk.o
+LIBS-y += drivers/bios_emulator/libatibiosemu.o
+LIBS-y += drivers/block/libblock.o
+LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
+LIBS-y += drivers/crypto/libcrypto.o
+LIBS-y += drivers/dma/libdma.o
+LIBS-y += drivers/fpga/libfpga.o
+LIBS-y += drivers/gpio/libgpio.o
+LIBS-y += drivers/hwmon/libhwmon.o
+LIBS-y += drivers/i2c/libi2c.o
+LIBS-y += drivers/input/libinput.o
+LIBS-y += drivers/misc/libmisc.o
+LIBS-y += drivers/mmc/libmmc.o
+LIBS-y += drivers/mtd/libmtd.o
+LIBS-y += drivers/mtd/nand/libnand.o
+LIBS-y += drivers/mtd/onenand/libonenand.o
+LIBS-y += drivers/mtd/ubi/libubi.o
+LIBS-y += drivers/mtd/spi/libspi_flash.o
+LIBS-y += drivers/net/libnet.o
+LIBS-y += drivers/net/phy/libphy.o
+LIBS-y += drivers/pci/libpci.o
+LIBS-y += drivers/pcmcia/libpcmcia.o
+LIBS-y += drivers/power/libpower.o \
+ drivers/power/fuel_gauge/libfuel_gauge.o \
+ drivers/power/pmic/libpmic.o \
+ drivers/power/battery/libbattery.o
+LIBS-y += drivers/spi/libspi.o
+LIBS-y += drivers/dfu/libdfu.o
ifeq ($(CPU),mpc83xx)
-LIBS += drivers/qe/libqe.o
-LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
+LIBS-y += drivers/qe/libqe.o
+LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
+LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc85xx)
-LIBS += drivers/qe/libqe.o
-LIBS += drivers/net/fm/libfm.o
-LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
+LIBS-y += drivers/qe/libqe.o
+LIBS-y += drivers/net/fm/libfm.o
+LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
+LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc86xx)
-LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
-endif
-LIBS += drivers/rtc/librtc.o
-LIBS += drivers/serial/libserial.o
-ifeq ($(CONFIG_GENERIC_LPC_TPM),y)
-LIBS += drivers/tpm/libtpm.o
-endif
-LIBS += drivers/twserial/libtws.o
-LIBS += drivers/usb/eth/libusb_eth.o
-LIBS += drivers/usb/gadget/libusb_gadget.o
-LIBS += drivers/usb/host/libusb_host.o
-LIBS += drivers/usb/musb/libusb_musb.o
-LIBS += drivers/usb/phy/libusb_phy.o
-LIBS += drivers/video/libvideo.o
-LIBS += drivers/watchdog/libwatchdog.o
-LIBS += common/libcommon.o
-LIBS += lib/libfdt/libfdt.o
-LIBS += api/libapi.o
-LIBS += post/libpost.o
-
-ifneq ($(CONFIG_AM335X)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
-LIBS += $(CPUDIR)/omap-common/libomap-common.o
+LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
+LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
+LIBS-y += drivers/rtc/librtc.o
+LIBS-y += drivers/serial/libserial.o
+LIBS-y += drivers/sound/libsound.o
+LIBS-y += drivers/tpm/libtpm.o
+LIBS-y += drivers/twserial/libtws.o
+LIBS-y += drivers/usb/eth/libusb_eth.o
+LIBS-y += drivers/usb/gadget/libusb_gadget.o
+LIBS-y += drivers/usb/host/libusb_host.o
+LIBS-y += drivers/usb/musb/libusb_musb.o
+LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
+LIBS-y += drivers/usb/phy/libusb_phy.o
+LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
+LIBS-y += drivers/video/libvideo.o
+LIBS-y += drivers/watchdog/libwatchdog.o
+LIBS-y += common/libcommon.o
+LIBS-y += lib/libfdt/libfdt.o
+LIBS-y += api/libapi.o
+LIBS-y += post/libpost.o
+LIBS-y += test/libtest.o
+
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
+LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
+endif
+
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
+endif
+
ifeq ($(SOC),s5pc1xx)
-LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
+LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
+endif
+ifeq ($(SOC),exynos)
+LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
endif
-ifeq ($(SOC),s5pc2xx)
-LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
+ifneq ($(CONFIG_TEGRA),)
+LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
+LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
+LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
endif
-LIBS := $(addprefix $(obj),$(sort $(LIBS)))
+LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
.PHONY : $(LIBS)
LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
# on the fly.
LDPPFLAGS += \
-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
+ -DCPUDIR=$(CPUDIR) \
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
BOARD_SIZE_CHECK = \
@actual=`wc -c $@ | awk '{print $$1}'`; \
- limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+ limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
if test $$actual -gt $$limit; then \
- echo "$@ exceeds file size limit:"; \
- echo " limit: $$limit bytes"; \
- echo " actual: $$actual bytes"; \
- echo " excess: $$((actual - limit)) bytes"; \
+ echo "$@ exceeds file size limit:" >&2 ; \
+ echo " limit: $$limit bytes" >&2 ; \
+ echo " actual: $$actual bytes" >&2 ; \
+ echo " excess: $$((actual - limit)) bytes" >&2; \
exit 1; \
fi
else
ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
-ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
-ALL-$(CONFIG_MMC_U_BOOT) += $(obj)mmc_spl/u-boot-mmc-spl.bin
ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
+ifneq ($(CONFIG_SPL_TARGET),)
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+endif
+
+# enable combined SPL/u-boot/dtb rules for tegra
+ifneq ($(CONFIG_TEGRA),)
+ifeq ($(CONFIG_OF_SEPARATE),y)
+ALL-y += $(obj)u-boot-dtb-tegra.bin
+else
+ALL-y += $(obj)u-boot-nodtb-tegra.bin
+endif
+endif
all: $(ALL-y) $(SUBDIR_EXAMPLES)
-$(obj)u-boot.dtb: $(obj)u-boot
+$(obj)u-boot.dtb: checkdtc $(obj)u-boot
$(MAKE) -C dts binary
mv $(obj)dts/dt.dtb $@
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
$(obj)u-boot.img: $(obj)u-boot.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
- -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+ -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+ -e $(CONFIG_SYS_UBOOT_START) \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
-$(obj)u-boot.imx: $(obj)u-boot.bin
- $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \
- -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(obj)u-boot.imx: $(obj)u-boot.bin depend
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(obj)u-boot.pbl: $(obj)u-boot.bin
+ $(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \
+ -R $(CONFIG_PBLPBI_CONFIG) -T pblimage \
+ -d $< $@
+
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-$(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
+
+
+$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+ -I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
+ rm $(obj)spl/u-boot-spl-pad.bin
+
+$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+ $(OBJTREE)/u-boot-with-spl.imx
+
+$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+ $(OBJTREE)/u-boot-with-nand-spl.imx
+
+$(obj)u-boot.ubl: $(obj)u-boot-with-spl.bin
$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
- -e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
- rm $(obj)u-boot-ubl.bin
+ -e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
+
+$(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+ $(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
+ -T aisimage \
+ -e $(CONFIG_SPL_TEXT_BASE) \
+ -d $(obj)spl/u-boot-spl.bin \
+ $(obj)spl/u-boot-spl.ais
+ $(OBJCOPY) ${OBJCFLAGS} -I binary \
+ --pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
+ $(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
+ cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
+ $(obj)u-boot.ais
+
+
+$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin elftosb
+ $(MAKE) -C $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
+
+# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
+# Both images are created using mkimage (crc etc), so that the ROM
+# bootloader can check its integrity. Padding needs to be done to the
+# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
+# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
+# The resulting image containing both U-Boot images is called u-boot.spr
+$(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
+ $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER \
+ -d $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl.img
+ tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_SPL_PAD_TO) \
+ of=$(obj)spl/u-boot-spl-pad.img 2>/dev/null
+ dd if=$(obj)spl/u-boot-spl.img of=$(obj)spl/u-boot-spl-pad.img \
+ conv=notrunc 2>/dev/null
+ cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
+
+ifneq ($(CONFIG_TEGRA),)
+$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
-$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
- elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \
- -o $(obj)u-boot.sb
+ifeq ($(CONFIG_OF_SEPARATE),y)
+$(obj)u-boot-dtb-tegra.bin: $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb
+ cat $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb > $@
+endif
+endif
+
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+ cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
+# PPC4xx needs the SPL at the end of the image, since the reset vector
+# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
+# and need to introduce a new build target with the full blown U-Boot
+# at the start padded up to the start of the SPL image. And then concat
+# the SPL image to the end.
+$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+ tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
+ of=$(obj)u-boot-pad.img 2>/dev/null
+ dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
+ conv=notrunc 2>/dev/null
+ cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
else
GEN_UBOOT = \
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
- sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+ $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
endif
$(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
- smap=`$(call SYSTEM_MAP,u-boot) | \
+ smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \
awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
-c common/system_map.c -o $(obj)common/system_map.o
$(MAKE) -C $(dir $@) $(notdir $@)
$(obj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
$(obj)u-boot-nand.bin: nand_spl $(obj)u-boot.bin
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
-onenand_ipl: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
- $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
-
-$(obj)u-boot-onenand.bin: onenand_ipl $(obj)u-boot.bin
- cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
-
-mmc_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
- $(MAKE) -C mmc_spl/board/$(BOARDDIR) all
-
-$(obj)mmc_spl/u-boot-mmc-spl.bin: mmc_spl
-
$(obj)spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend
$(MAKE) -C spl all
updater:
$(MAKE) -C tools/updater all
+elftosb:
+ $(MAKE) -C $(SUBDIR_TOOLS)/elftosb all
# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
$(obj)include/autoconf.mk \
$(obj)include/generated/generic-asm-offsets.h \
$(obj)include/generated/asm-offsets.h
- for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \
+ for dir in $(SUBDIRS) $(CPUDIR) $(LDSCRIPT_MAKEFILE_DIR) ; do \
$(MAKE) -C $$dir _depend ; done
TAG_SUBDIRS = $(SUBDIRS)
FIND := find
FINDFLAGS := -L
+checkstack:
+ $(CROSS_COMPILE)objdump -d $(obj)u-boot \
+ `$(FIND) $(obj) -name u-boot-spl -print` | \
+ perl $(src)tools/checkstack.pl $(ARCH)
+
tags ctags:
ctags -w -o $(obj)ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
$(obj)System.map: $(obj)u-boot
@$(call SYSTEM_MAP,$<) > $(obj)System.map
+checkthumb:
+ @if test $(call cc-version) -lt 0404; then \
+ echo -n '*** Your GCC does not produce working '; \
+ echo 'binaries in THUMB mode.'; \
+ echo '*** Your board is configured for THUMB mode.'; \
+ false; \
+ fi
+
+# GCC 3.x is reported to have problems generating the type of relocation
+# that U-Boot wants.
+# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+checkgcc4:
+ @if test $(call cc-version) -lt 0400; then \
+ echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
+ false; \
+ fi
+
+checkdtc:
+ @if test $(call dtc-version) -lt 0104; then \
+ echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
+ false; \
+ fi
+
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
$(obj)include/generated/asm-offsets.h: $(obj)include/autoconf.mk.dep \
$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
- @echo Generating $@
+ @$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep
$(MAKE) -C $@ all
endif # config.mk
+# ARM relocations should all be R_ARM_RELATIVE.
+checkarmreloc: $(obj)u-boot
+ @if test "R_ARM_RELATIVE" != \
+ "`$(CROSS_COMPILE)readelf -r $< | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
+ then echo "$< contains relocations other than \
+ R_ARM_RELATIVE"; false; fi
+
$(VERSION_FILE):
@mkdir -p $(dir $(VERSION_FILE))
@( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
gdbtools: gdb
+xmldocs pdfdocs psdocs htmldocs mandocs: tools/kernel-doc/docproc
+ $(MAKE) U_BOOT_VERSION=$(U_BOOT_VERSION) -C doc/DocBook/ $@
+
tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
$(MAKE) -C tools HOST_TOOLS_ALL=y
sinclude $(obj).boards.depend
$(obj).boards.depend: boards.cfg
- awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
+ @awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
#
# Functions to generate common board directory names
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
-#========================================================================
-# ARM
-#========================================================================
-
-xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
-
-omap1610inn_config \
-omap1610inn_cs0boot_config \
-omap1610inn_cs3boot_config \
-omap1610inn_cs_autoboot_config \
-omap1610h2_config \
-omap1610h2_cs0boot_config \
-omap1610h2_cs3boot_config \
-omap1610h2_cs_autoboot_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
- elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
- echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
-
-omap730p2_config \
-omap730p2_cs0boot_config \
-omap730p2_cs3boot_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
-
-spear300_config \
-spear310_config \
-spear320_config : unconfig
- @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear
-
-spear600_config : unconfig
- @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear
-
-SX1_stdout_serial_config \
-SX1_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
- echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ SX1 arm arm925t sx1
-
-#########################################################################
-## XScale Systems
-#########################################################################
-
-pdnb3_config \
-scpu_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring scpu_,$@)" ] ; then \
- echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
- fi
- @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
-
-#########################################################################
-## ARM1136 Systems
-#########################################################################
-
-apollon_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
- @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
- @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
-
-#########################################################################
-## ARM1176 Systems
-#########################################################################
-smdk6400_noUSB_config \
-smdk6400_config : unconfig
- @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
- @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
- @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
- @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
- echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
- else \
- echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
- fi
- @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
- @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
#########################################################################
#########################################################################
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
- $(obj)tools/ncb $(obj)tools/ubsha1
+ $(obj)tools/mk{smdk5250,}spl \
+ $(obj)tools/mxsboot \
+ $(obj)tools/ncb $(obj)tools/ubsha1 \
+ $(obj)tools/kernel-doc/docproc \
+ $(obj)tools/proftool
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/voiceblue/eeprom \
@rm -f $(obj)lib/asm-offsets.s
@rm -f $(obj)include/generated/asm-offsets.h
@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
- @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
- @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
- @rm -f $(obj)mmc_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,u-boot-spl.bin,u-boot-mmc-spl.bin}
- @rm -f $(ONENAND_BIN)
- @rm -f $(obj)onenand_ipl/u-boot.lds
- @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
- @rm -f $(obj)MLO
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
+ @$(MAKE) -s -C doc/DocBook/ cleandocs
@find $(OBJTREE) -type f \
- \( -name 'core' -o -name '*.bak' -o -name '*~' \
- -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
+ \( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
+ -o -name '*.o' -o -name '*.a' -o -name '*.exe' \
+ -o -name '*.cfgtmp' \) -print \
| xargs rm -f
# Removes everything not needed for testing u-boot
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
@rm -f $(obj)u-boot.kwb
+ @rm -f $(obj)u-boot.pbl
@rm -f $(obj)u-boot.imx
+ @rm -f $(obj)u-boot-with-spl.imx
+ @rm -f $(obj)u-boot-with-nand-spl.imx
@rm -f $(obj)u-boot.ubl
+ @rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
- @rm -f $(obj)tools/inca-swap-bytes
+ @rm -f $(obj)u-boot.bd
+ @rm -f $(obj)u-boot.spr
+ @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
+ @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
+ @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
+ @rm -f $(obj)spl/u-boot-spl.lds
+ @rm -f $(obj)MLO MLO.byteswap
+ @rm -f $(obj)SPL
+ @rm -f $(obj)tools/xway-swap-bytes
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
+ @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@rm -fr $(obj)include/generated
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
- @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
- @[ ! -d $(obj)mmc_spl ] || find $(obj)mmc_spl -name "*" -type l -print | xargs rm -f
@rm -f $(obj)dts/*.tmp
+ @rm -f $(obj)spl/u-boot-spl{,-pad}.ais
mrproper \
distclean: clobber unconfig
projects / karo-tx-uboot.git / blobdiff