cmc_pu2_config : unconfig
@./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
-integratorap_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs integratorap
+########################################################################
+## ARM Integrator boards
+## There are two variants /AP && /CP
+## - many different core modules (CMs) can be used
+## - some share characteristics
+## Those without specific cpu support can still use U-Boot
+## provided the ARM boot monitor (or similar) runs before U-Boot
+## to set up the platform e.g. map writeable memory to 0x00000000
+## setup MMU, setup caches etc.
+## Ported cores are:-
+## ARM926EJ-S
+## ARM946E-S
+##
+########################################################################
+xtract_int_board = $(subst _$(subst integrator$1_,,$(subst _config,,$2)),,$(subst _config,,$2))
+xtract_int_cm = $(subst integrator$1_,,$(subst _config,,$2))
+#########################################################################
+## Integrator/AP
+#########################################################################
+integratorap_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/AP */" >> tmp.fil; \
+ echo "/* Core module not defined */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
+ echo -n " /* Integrator core module " >> tmp.fil; \
+ echo "with unknown core */" >> tmp.fil; \
+ cpu=arm_intcm; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/integratorap/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a integratorap arm arm_intcm integratorap;
+
+integratorap_CM720T_config integratorap_CM7TDMI_config \
+integratorap_CM920T_config integratorap_CM920T_ETM_config \
+integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \
+integratorap_CM940T_config integratorap_CM946E_S_config \
+integratorap_CM966E_S_config integratorap_CM10200E_config \
+integratorap_CM10220E_config integratorap_CM1026EJ_S_config \
+integratorap_CM1136JF_S_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/AP */" >> tmp.fil; \
+ cm=$(call xtract_int_cm,ap,$@); \
+ echo -n "#define CONFIG_$$cm " >> tmp.fil; \
+ echo " /* core module */" >> tmp.fil; \
+ case $$cm in \
+ CM920T) \
+ echo -n "#define CONFIG_ARM920" >> tmp.fil; \
+ echo -n "T 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM920T" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm920t;; \
+ CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
+ echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM926EJ-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm926ejs;; \
+ CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
+ echo -n "E_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM946E-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm946es;; \
+ *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
+ echo -n "TCM 1 /* Int" >> tmp.fil; \
+ echo -n "egrator core module w" >> tmp.fil; \
+ echo -n "ith unported core" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm_intcm;; \
+ esac; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/$(call xtract_int_board,ap,$@)/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a $(call xtract_int_board,ap,$@) arm $$cpu \
+ $(call xtract_int_board,ap,$@);
-integratorcp_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs integratorcp
+#########################################################################
+## Integrator/CP
+#########################################################################
+integratorcp_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/CP */" >> tmp.fil; \
+ echo "/* Core module not defined */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
+ echo -n " /* Integrator core module " >> tmp.fil; \
+ echo "with unknown core */" >> tmp.fil; \
+ cpu=arm_intcm; \
+ echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil; \
+ echo -n " /* CM may not have " >> tmp.fil; \
+ echo "multiple SSRAM mapping */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil; \
+ echo -n " /* CM may not support SPD " >> tmp.fil; \
+ echo "query */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil; \
+ echo -n " /* CM may not support " >> tmp.fil; \
+ echo "remapping */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_INIT " >> tmp.fil; \
+ echo -n " /* CM may not have " >> tmp.fil; \
+ echo "initialization reg */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil; \
+ echo -n " /* CM may not have TCRAM */" >> tmp.fil; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/integratorcp/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a integratorcp arm arm_intcm integratorcp;
+
+integratorcp_CM920T_config integratorcp_CM920T_ETM_config \
+integratorcp_CM922T_XA10_config integratorcp_CM926EJ_S_config \
+integratorcp_CM940T_config integratorcp_CM946E_S_config \
+integratorcp_CM966E_S_config integratorcp_CM10200E_config \
+integratorcp_CM10220E_config integratorcp_CM1026EJ_S_config \
+integratorcp_CM1136JF_S_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/CP */" >> tmp.fil; \
+ cm=$(call xtract_int_cm,cp,$@); \
+ echo -n "#define CONFIG_$$cm " >> tmp.fil; \
+ echo " /* core module */" >> tmp.fil; \
+ echo "/* $$cm core module */" >> tmp.fil; \
+ case $$cm in \
+ CM920T) echo -n "#define CONFIG_ARM920" >> tmp.fil; \
+ echo -n "T 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM920T" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm920t;; \
+ CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
+ echo -n "E_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM946E-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm946es;; \
+ CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
+ echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM926EJ-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm926ejs;; \
+ *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
+ echo -n "TCM 1 /* Int" >> tmp.fil; \
+ echo -n "egrator core module w" >> tmp.fil; \
+ echo -n "ith unported core" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm_intcm;; \
+ esac; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/$(call xtract_int_board,cp,$@)/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a $(call xtract_int_board,cp,$@) arm $$cpu \
+ $(call xtract_int_board,cp,$@);
lpd7a400_config \
lpd7a404_config: unconfig
@echo "#define CONFIG_DBAU1550 1" >>include/config.h
@./mkconfig -a dbau1x00 mips mips dbau1x00
+pb1000_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_PB1000 1" >>include/config.h
+ @./mkconfig -a pb1x00 mips mips pb1x00
+
#########################################################################
## MIPS64 5Kc
#########################################################################
projects / karo-tx-uboot.git / blobdiff