#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2005
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
-e s/powerpc/ppc/ \
-e s/macppc/ppc/)
-HOSTOS := $(shell uname -s | tr A-Z a-z | \
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
-export HOSTARCH
+export HOSTARCH HOSTOS
# Deal with colliding definitions from tcsh etc.
VENDOR=
ifeq (include/config.mk,$(wildcard include/config.mk))
# load ARCH, BOARD, and CPU configuration
include include/config.mk
-export ARCH CPU BOARD VENDOR
+export ARCH CPU BOARD VENDOR SOC
# load other configuration
include $(TOPDIR)/config.mk
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
+CROSS_COMPILE = powerpc-linux-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
ifeq ($(ARCH),mips)
CROSS_COMPILE = mips_4KC-
endif
+ifeq ($(ARCH),nios)
+CROSS_COMPILE = nios-elf-
+endif
+ifeq ($(ARCH),nios2)
+CROSS_COMPILE = nios2-elf-
+endif
+ifeq ($(ARCH),m68k)
+CROSS_COMPILE = m68k-elf-
+endif
+ifeq ($(ARCH),microblaze)
+CROSS_COMPILE = mb-
+endif
endif
endif
export CROSS_COMPILE
-# The "tools" are needed early, so put this first
-SUBDIRS = tools \
- lib_generic \
- lib_$(ARCH) \
- cpu/$(CPU) \
- board/$(BOARDDIR) \
- common \
- disk \
- fs \
- net \
- rtc \
- dtt \
- drivers \
- post \
- post/cpu \
- examples
-
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
-OBJS = cpu/$(CPU)/start.o
+OBJS = cpu/$(CPU)/start.o
ifeq ($(CPU),i386)
-OBJS += cpu/$(CPU)/start16.o
-OBJS += cpu/$(CPU)/reset.o
+OBJS += cpu/$(CPU)/start16.o
+OBJS += cpu/$(CPU)/reset.o
endif
ifeq ($(CPU),ppc4xx)
-OBJS += cpu/$(CPU)/resetvec.o
+OBJS += cpu/$(CPU)/resetvec.o
+endif
+ifeq ($(CPU),mpc83xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
+ifeq ($(CPU),mpc85xx)
+OBJS += cpu/$(CPU)/resetvec.o
endif
-LIBS = board/$(BOARDDIR)/lib$(BOARD).a
+LIBS = lib_generic/libgeneric.a
+LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
+ifdef SOC
+LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
+endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a fs/fat/libfat.a
+LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += rtc/librtc.a
LIBS += dtt/libdtt.a
LIBS += drivers/libdrivers.a
+LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
-LIBS += lib_generic/libgeneric.a
+.PHONY : $(LIBS)
+
+# Add GCC lib
+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+
+# The "tools" are needed early, so put this first
+# Don't include stuff already done in $(LIBS)
+SUBDIRS = tools \
+ examples \
+ post \
+ post/cpu
+.PHONY : $(SUBDIRS)
+
+#########################################################################
#########################################################################
-all: u-boot.srec u-boot.bin System.map
+ALL = u-boot.srec u-boot.bin System.map
-install: all
- -cp u-boot.bin /tftpboot/u-boot.bin
- -cp u-boot.bin /net/denx/tftpboot/u-boot.bin
+all: $(ALL)
+
+u-boot.hex: u-boot
+ $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
u-boot.srec: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
u-boot.bin: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+u-boot.img: u-boot.bin
+ ./tools/mkimage -A $(ARCH) -T firmware -C none \
+ -a $(TEXT_BASE) -e 0 \
+ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \
+ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
+ -d $< $@
+
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
-u-boot: depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT)
+u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) --end-group \
+ --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
-subdirs:
- @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done
+$(LIBS):
+ $(MAKE) -C `dirname $@`
+
+$(SUBDIRS):
+ $(MAKE) -C $@ all
+
+gdbtools:
+ $(MAKE) -C tools/gdb || exit 1
depend dep:
@for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
tags:
ctags -w `find $(SUBDIRS) include \
+ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
+ fs/cramfs fs/fat fs/fdos fs/jffs2 \
+ net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
etags:
etags -a `find $(SUBDIRS) include \
+ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
+ fs/cramfs fs/fat fs/fdos fs/jffs2 \
+ net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
System.map: u-boot
#########################################################################
unconfig:
- rm -f include/config.h include/config.mk
+ @rm -f include/config.h include/config.mk board/*/config.tmp
#========================================================================
# PowerPC
## MPC5xx Systems
#########################################################################
+canmb_config: unconfig
+ @./mkconfig -a canmb ppc mpc5xxx canmb
+
cmi_mpc5xx_config: unconfig
@./mkconfig $(@:_config=) ppc mpc5xx cmi
+PATI_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc5xx pati mpl
+
+#########################################################################
+## MPC5xxx Systems
+#########################################################################
+
+aev_config: unconfig
+ @./mkconfig -a aev ppc mpc5xxx tqm5200
+
+cpci5200_config: unconfig
+ @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd
+
+hmi1001_config: unconfig
+ @./mkconfig hmi1001 ppc mpc5xxx hmi1001
+
+Lite5200_config \
+Lite5200_LOWBOOT_config \
+Lite5200_LOWBOOT08_config \
+icecube_5200_config \
+icecube_5200_LOWBOOT_config \
+icecube_5200_LOWBOOT08_config \
+icecube_5200_DDR_config \
+icecube_5200_DDR_LOWBOOT_config \
+icecube_5200_DDR_LOWBOOT08_config \
+icecube_5100_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { if [ "$(findstring DDR,$@)" ] ; \
+ then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
+ else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ fi ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @[ -z "$(findstring LOWBOOT08,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
+ echo "... with 8 MB flash only" ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @[ -z "$(findstring DDR,$@)" ] || \
+ { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ echo "... DDR memory revision" ; \
+ }
+ @[ -z "$(findstring 5200,$@)" ] || \
+ { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ echo "... with MPC5200 processor" ; \
+ }
+ @[ -z "$(findstring 5100,$@)" ] || \
+ { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ echo "... with MGT5100 processor" ; \
+ }
+ @./mkconfig -a IceCube ppc mpc5xxx icecube
+
+inka4x0_config: unconfig
+ @./mkconfig inka4x0 ppc mpc5xxx inka4x0
+
+o2dnt_config:
+ @./mkconfig -a o2dnt ppc mpc5xxx o2dnt
+
+pf5200_config: unconfig
+ @./mkconfig -a pf5200 ppc mpc5xxx pf5200 esd
+
+PM520_config \
+PM520_DDR_config \
+PM520_ROMBOOT_config \
+PM520_ROMBOOT_DDR_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring DDR,$@)" ] || \
+ { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ echo "... DDR memory revision" ; \
+ }
+ @[ -z "$(findstring ROMBOOT,$@)" ] || \
+ { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ echo "... booting from 8-bit flash" ; \
+ }
+ @./mkconfig -a PM520 ppc mpc5xxx pm520
+
+MINI5200_config \
+EVAL5200_config \
+TOP5200_config: unconfig
+ @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
+ @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
+
+Total5100_config \
+Total5200_config \
+Total5200_lowboot_config \
+Total5200_Rev2_config \
+Total5200_Rev2_lowboot_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring 5100,$@)" ] || \
+ { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ echo "... with MGT5100 processor" ; \
+ }
+ @[ -z "$(findstring 5200,$@)" ] || \
+ { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ echo "... with MPC5200 processor" ; \
+ }
+ @[ -n "$(findstring Rev,$@)" ] || \
+ { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \
+ echo "... revision 1 board" ; \
+ }
+ @[ -z "$(findstring Rev2_,$@)" ] || \
+ { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \
+ echo "... revision 2 board" ; \
+ }
+ @[ -z "$(findstring lowboot_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \
+ echo "... with lowboot configuration" ; \
+ }
+ @./mkconfig -a Total5200 ppc mpc5xxx total5200
+
+TQM5200_auto_config \
+TQM5200_AA_config \
+TQM5200_AB_config \
+TQM5200_AC_config \
+MiniFAP_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring MiniFAP,$@)" ] || \
+ { echo "#define CONFIG_MINIFAP" >>include/config.h ; \
+ echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
+ echo "... TQM5200_AC on MiniFAP" ; \
+ }
+ @[ -z "$(findstring AA,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \
+ echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
+ }
+ @[ -z "$(findstring AB,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \
+ echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
+ echo "... with Graphics Controller"; \
+ }
+ @[ -z "$(findstring AC,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
+ echo "... with 4 MB Flash, 128 MB SDRAM" ; \
+ echo "... with Graphics Controller"; \
+ }
+ @[ -z "$(findstring auto,$@)" ] || \
+ { echo "#define CONFIG_CS_AUTOCONF" >>include/config.h ; \
+ echo "... with automatic CS configuration" ; \
+ }
+ @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
+
+spieval_config: unconfig
+ echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+ echo "... with automatic CS configuration"
+ @./mkconfig -a spieval ppc mpc5xxx tqm5200
+
#########################################################################
## MPC8xx Systems
#########################################################################
-ADS860_config: unconfig
+Adder_config \
+Adder87x_config \
+AdderII_config \
+ : unconfig
+ $(if $(findstring AdderII,$@), \
+ @echo "#define CONFIG_MPC852T" > include/config.h)
+ @./mkconfig -a Adder ppc mpc8xx adder
+
+ADS860_config \
+FADS823_config \
+FADS850SAR_config \
+MPC86xADS_config \
+MPC885ADS_config \
+FADS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads
AMX860_config : unconfig
ETX094_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx etx094
-FADS823_config \
-FADS850SAR_config \
-FADS860T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx fads
-
FLAGADM_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx flagadm
hermes_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx hermes
+HMI10_config : unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
+
IAD210_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens
@./mkconfig -a IVMS8 ppc mpc8xx ivm
KUP4K_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx kup4k
+ @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup
+
+KUP4X_config : unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup
LANTEC_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx lantec
}
@./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
+xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
+
+NETPHONE_V2_config \
+NETPHONE_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring NETPHONE_config,$@)" ] || \
+ { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \
+ }
+ @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
+ { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \
+ }
+ @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
+
+xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
+
+NETTA_ISDN_6412_SWAPHOOK_config \
+NETTA_ISDN_SWAPHOOK_config \
+NETTA_6412_SWAPHOOK_config \
+NETTA_SWAPHOOK_config \
+NETTA_ISDN_6412_config \
+NETTA_ISDN_config \
+NETTA_6412_config \
+NETTA_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring ISDN_,$@)" ] || \
+ { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \
+ }
+ @[ -n "$(findstring ISDN_,$@)" ] || \
+ { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \
+ }
+ @[ -z "$(findstring 6412_,$@)" ] || \
+ { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \
+ }
+ @[ -n "$(findstring 6412_,$@)" ] || \
+ { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \
+ }
+ @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
+ { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \
+ }
+ @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
+ { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \
+ }
+ @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta
+
+xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
+
+NETTA2_V2_config \
+NETTA2_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring NETTA2_config,$@)" ] || \
+ { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \
+ }
+ @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
+ { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \
+ }
+ @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+
+NC650_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx nc650
+
NX823_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx nx823
pcu_e_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens
+QS850_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
+
+QS823_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
+
+QS860T_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
+
+quantum_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx quantum
+
R360MPI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
RPXlite_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx RPXlite
+RPXlite_DW_64_config \
+RPXlite_DW_LCD_config \
+RPXlite_DW_64_LCD_config \
+RPXlite_DW_NVRAM_config \
+RPXlite_DW_NVRAM_64_config \
+RPXlite_DW_NVRAM_LCD_config \
+RPXlite_DW_NVRAM_64_LCD_config \
+RPXlite_DW_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _64,$@)" ] || \
+ { echo "#define RPXlite_64MHz" >>include/config.h ; \
+ echo "... with 64MHz system clock ..."; \
+ }
+ @[ -z "$(findstring _LCD,$@)" ] || \
+ { echo "#define CONFIG_LCD" >>include/config.h ; \
+ echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
+ echo "... with LCD display ..."; \
+ }
+ @[ -z "$(findstring _NVRAM,$@)" ] || \
+ { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \
+ echo "... with ENV in NVRAM ..."; \
+ }
+ @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw
+
rmu_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx rmu
SPD823TS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx spd8xx
+stxxtc_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx stxxtc
+
svm_sc8xx_config: unconfig
@ >include/config.h
@./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx
@./mkconfig $(@:_config=) ppc mpc8xx top860 emk
# Play some tricks for configuration selection
-# All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock,
-# but only 855 and 860 boards may come with FEC
-# and 823 boards may have LCD support
-xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1)))))
+# Only 855 and 860 boards may come with FEC
+# and only 823 boards may have LCD support
+xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
FPS850L_config \
FPS860L_config \
NSCU_config \
TQM823L_config \
-TQM823L_66MHz_config \
-TQM823L_80MHz_config \
TQM823L_LCD_config \
-TQM823L_LCD_66MHz_config \
-TQM823L_LCD_80MHz_config \
TQM850L_config \
-TQM850L_66MHz_config \
-TQM850L_80MHz_config \
TQM855L_config \
-TQM855L_66MHz_config \
-TQM855L_80MHz_config \
TQM860L_config \
-TQM860L_66MHz_config \
-TQM860L_80MHz_config \
TQM862L_config \
-TQM862L_66MHz_config \
-TQM862L_80MHz_config \
+TQM823M_config \
+TQM850M_config \
TQM855M_config \
-TQM855M_66MHz_config \
-TQM855M_80MHz_config \
TQM860M_config \
-TQM860M_66MHz_config \
-TQM860M_80MHz_config \
TQM862M_config \
-TQM862M_66MHz_config \
-TQM862M_80MHz_config \
-TQM862M_100MHz_config: unconfig
+TQM866M_config: unconfig
@ >include/config.h
- @[ -z "$(findstring _66MHz,$@)" ] || \
- { echo "#define CONFIG_66MHz" >>include/config.h ; \
- echo "... with 66MHz system clock" ; \
- }
- @[ -z "$(findstring _80MHz,$@)" ] || \
- { echo "#define CONFIG_80MHz" >>include/config.h ; \
- echo "... with 80MHz system clock" ; \
- }
- @[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CONFIG_100MHz" >>include/config.h ; \
- echo "... with 100MHz system clock" ; \
- }
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>include/config.h ; \
- echo "#define CONFIG_NEC_NL6648BC20" >>include/config.h ; \
+ echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
echo "... with LCD display" ; \
}
@./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
@./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+uc100_config : unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx uc100
+
v37_config: unconfig
@echo "#define CONFIG_LCD" >include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
@./mkconfig $(@:_config=) ppc mpc8xx v37
+wtk_config: unconfig
+ @echo "#define CONFIG_LCD" >include/config.h
+ @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h
+ @./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+
#########################################################################
## PPC4xx Systems
#########################################################################
+xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
ADCIOP_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
+AP1000_config:unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix
+
+APC405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
+
AR405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
ASH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
-BUBINGA405EP_config:unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+bamboo_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
CANBT_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
+CATcenter_config \
+CATcenter_25_config \
+CATcenter_33_config: unconfig
+ @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h
+ @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h
+ @[ -z "$(findstring _25,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ echo "SysClk = 25MHz" ; \
+ }
+ @[ -z "$(findstring _33,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ echo "SysClk = 33MHz" ; \
+ }
+ @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+
+CPCI2DP_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd
+
CPCI405_config \
CPCI4052_config \
+CPCI405DT_config \
CPCI405AB_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk
CPCIISER4_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd
-CRAYL1_config:unconfig
+CRAYL1_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx L1 cray
+csb272_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx csb272
+
+csb472_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx csb472
+
DASA_SIM_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd
+DP405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd
+
DU405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
-EBONY_config:unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ebony
+ebony_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
-ERIC_config:unconfig
+ERIC_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx eric
-EXBITGEN_config:unconfig
+EXBITGEN_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx exbitgen
-MIP405_config:unconfig
+G2000_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx g2000
+
+HH405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd
+
+HUB405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
+
+JSE_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx jse
+
+KAREF_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst
+
+METROBOX_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst
+
+MIP405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
-MIP405T_config:unconfig
+MIP405T_config: unconfig
@echo "#define CONFIG_MIP405T" >include/config.h
@echo "Enable subset config for MIP405T"
@./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
-ML2_config:unconfig
+ML2_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ml2
+ml300_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
+
+ocotea_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
+
OCRTC_config \
ORSG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd
+p3p440_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive
+
PCI405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pci405 esd
-PIP405_config:unconfig
+PIP405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl
+PLU405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd
+
PMC405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
+PPChameleonEVB_config \
+PPChameleonEVB_BA_25_config \
+PPChameleonEVB_ME_25_config \
+PPChameleonEVB_HI_25_config \
+PPChameleonEVB_BA_33_config \
+PPChameleonEVB_ME_33_config \
+PPChameleonEVB_HI_33_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring EVB_BA,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
+ echo "... BASIC model" ; \
+ }
+ @[ -z "$(findstring EVB_ME,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \
+ echo "... MEDIUM model" ; \
+ }
+ @[ -z "$(findstring EVB_HI,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
+ echo "... HIGH-END model" ; \
+ }
+ @[ -z "$(findstring _25,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ echo "SysClk = 25MHz" ; \
+ }
+ @[ -z "$(findstring _33,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ echo "SysClk = 33MHz" ; \
+ }
+ @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+
+sbc405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx sbc405
+
+sycamore_config: unconfig
+ @echo "Configuring for sycamore board as subset of walnut..."
+ @./mkconfig -a walnut ppc ppc4xx walnut amcc
+
+VOH405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
+
+VOM405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
+
+CMS700_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx cms700 esd
+
W7OLMC_config \
W7OLMG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx w7o
-WALNUT405_config:unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx walnut405
+walnut_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
+
+WUH405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
+
+XPEDITE1K_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
+
+yosemite_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
+#########################################################################
+## MPC8220 Systems
+#########################################################################
+
+Alaska8220_config \
+Yukon8220_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8220 alaska
+
+sorcery_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8220 sorcery
#########################################################################
## MPC824x Systems
#########################################################################
-xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
+xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
A3000_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x a3000
+barco_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x barco
+
BMW_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x bmw
CU824_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x cu824
+debris_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x debris etin
+
+eXalion_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x eXalion
+
+HIDDEN_DRAGON_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
+
MOUSSE_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x mousse
MUSENKI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x musenki
+MVBLUE_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x mvblue
+
OXC_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x oxc
Sandpoint8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sandpoint
+sbc8240_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x sbc8240
+
SL8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sl8245
utx8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x utx8245
+cobra5272_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+
#########################################################################
## MPC8260 Systems
#########################################################################
+atc_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8260 atc
+
cogent_mpc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 cogent
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
+CPU87_config \
+CPU87_ROMBOOT_config: unconfig
+ @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87
+ @cd ./include ; \
+ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+ echo "... booting from 8-bit flash" ; \
+ else \
+ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+ echo "... booting from 64-bit flash" ; \
+ fi; \
+ echo "export CONFIG_BOOT_ROM" >> config.mk;
+
+ep8248_config \
+ep8248E_config : unconfig
+ @./mkconfig ep8248 ppc mpc8260 ep8248
+
ep8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ep8260
hymod_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 hymod
+IDS8247_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8260 ids8247
+
IPHASE4539_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 iphase4539
-MPC8260ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 mpc8260ads
+ISPAN_config \
+ISPAN_REVB_config: unconfig
+ @if [ "$(findstring _REVB_,$@)" ] ; then \
+ echo "#define CFG_REV_B" > include/config.h ; \
+ fi
+ @./mkconfig -a ISPAN ppc mpc8260 ispan
+
+MPC8260ADS_config \
+MPC8260ADS_lowboot_config \
+MPC8260ADS_33MHz_config \
+MPC8260ADS_33MHz_lowboot_config \
+MPC8260ADS_40MHz_config \
+MPC8260ADS_40MHz_lowboot_config \
+MPC8272ADS_config \
+MPC8272ADS_lowboot_config \
+PQ2FADS_config \
+PQ2FADS_lowboot_config \
+PQ2FADS-VR_config \
+PQ2FADS-VR_lowboot_config \
+PQ2FADS-ZU_config \
+PQ2FADS-ZU_lowboot_config \
+PQ2FADS-ZU_66MHz_config \
+PQ2FADS-ZU_66MHz_lowboot_config \
+ : unconfig
+ $(if $(findstring PQ2FADS,$@), \
+ @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
+ @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h)
+ $(if $(findstring MHz,$@), \
+ @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
+ $(if $(findstring VR,$@), \
+ @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+ @[ -z "$(findstring lowboot_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \
+ echo "... with lowboot configuration" ; \
+ }
+ @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
MPC8266ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
+# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
-PM825_ROMBOOT_config: unconfig
- @echo "#define CONFIG_PCI" >include/config.h
- @./mkconfig -a PM826 ppc mpc8260 pm826
- @cd ./include ; \
- if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+PM825_ROMBOOT_config \
+PM825_BIGFLASH_config \
+PM825_ROMBOOT_BIGFLASH_config \
+PM826_config \
+PM826_ROMBOOT_config \
+PM826_BIGFLASH_config \
+PM826_ROMBOOT_BIGFLASH_config: unconfig
+ @if [ "$(findstring PM825_,$@)" ] ; then \
+ echo "#define CONFIG_PCI" >include/config.h ; \
+ else \
+ >include/config.h ; \
+ fi
+ @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "... booting from 8-bit flash" ; \
+ echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
+ echo "... with 32 MB Flash" ; \
+ echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
+ fi; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
echo "... booting from 64-bit flash" ; \
- fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk; \
+ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
+ echo "... with 32 MB Flash" ; \
+ echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
+ echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \
+ else \
+ echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \
+ fi; \
+ fi
+ @./mkconfig -a PM826 ppc mpc8260 pm826
-PM826_config \
-PM826_ROMBOOT_config: unconfig
- @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826
- @cd ./include ; \
- if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- echo "... booting from 8-bit flash" ; \
+PM828_config \
+PM828_PCI_config \
+PM828_ROMBOOT_config \
+PM828_ROMBOOT_PCI_config: unconfig
+ @if [ -z "$(findstring _PCI_,$@)" ] ; then \
+ echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "... with PCI enabled" ; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- echo "... booting from 64-bit flash" ; \
- fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk; \
+ >include/config.h ; \
+ fi
+ @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+ echo "... booting from 8-bit flash" ; \
+ echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+ fi
+ @./mkconfig -a PM828 ppc mpc8260 pm828
ppmc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
+Rattler8248_config \
+Rattler_config: unconfig
+ $(if $(findstring 8248,$@), \
+ @echo "#define CONFIG_MPC8248" > include/config.h)
+ @./mkconfig -a Rattler ppc mpc8260 rattler
+
RPXsuper_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
SCM_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 SCM siemens
-TQM8255_config \
-TQM8260_config \
-TQM8260_L2_config \
-TQM8255_266MHz_config \
-TQM8260_266MHz_config \
-TQM8260_L2_266MHz_config \
-TQM8255_300MHz_config \
-TQM8260_300MHz_config: unconfig
- @ >include/config.h
- @if [ "$(findstring _L2_,$@)" ] ; then \
+TQM8255_AA_config \
+TQM8260_AA_config \
+TQM8260_AB_config \
+TQM8260_AC_config \
+TQM8260_AD_config \
+TQM8260_AE_config \
+TQM8260_AF_config \
+TQM8260_AG_config \
+TQM8260_AH_config \
+TQM8265_AA_config: unconfig
+ @case "$@" in \
+ TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
+ TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
+ TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
+ TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
+ TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
+ TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \
+ TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
+ TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \
+ TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \
+ TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
+ esac; \
+ >include/config.h ; \
+ if [ "$${CTYPE}" != "MPC8260" ] ; then \
+ echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \
+ fi; \
+ echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \
+ echo "... with $${CFREQ}MHz system clock" ; \
+ if [ "$${CACHE}" == "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>include/config.h ; \
- echo "... with L2 Cache support (60x Bus Mode)" ; \
+ echo "... with L2 Cache support" ; \
else \
echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \
echo "... without L2 Cache support" ; \
+ fi; \
+ if [ "$${BMODE}" == "60x" ] ; then \
+ echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \
+ echo "... with 60x Bus Mode" ; \
+ else \
+ echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \
+ echo "... without 60x Bus Mode" ; \
fi
- @[ -z "$(findstring _266MHz,$@)" ] || \
- { echo "#define CONFIG_266MHz" >>include/config.h ; \
- echo "... with 266MHz system clock" ; \
- }
- @[ -z "$(findstring _300MHz,$@)" ] || \
- { echo "#define CONFIG_300MHz" >>include/config.h ; \
- echo "... with 300MHz system clock" ; \
- }
- @[ -z "$(findstring TQM8255_,$@)" ] || \
- { echo "#define CONFIG_MPC8255" >>include/config.h ; }
@./mkconfig -a TQM8260 ppc mpc8260 tqm8260
-atc_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 atc
+VoVPN-GW_66MHz_config \
+VoVPN-GW_100MHz_config: unconfig
+ @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
+ @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+
+ZPC1900_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8260 zpc1900
+
+#========================================================================
+# M68K
+#========================================================================
+#########################################################################
+## Coldfire
+#########################################################################
+
+M5272C3_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
+
+M5282EVB_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb
+
+TASREG_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
+
+#########################################################################
+## MPC83xx Systems
+#########################################################################
+
+MPC8349ADS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+
+TQM834x_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc83xx tqm834x
+
+#########################################################################
+## MPC85xx Systems
+#########################################################################
+
+MPC8540ADS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
+
+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config: unconfig
+ @echo "" >include/config.h ; \
+ if [ "$(findstring _33_,$@)" ] ; then \
+ echo -n "... 33 MHz PCI" ; \
+ else \
+ echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+ echo -n "... 66 MHz PCI" ; \
+ fi ; \
+ if [ "$(findstring _slave_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+ echo " slave" ; \
+ else \
+ echo " host" ; \
+ fi
+ @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
+MPC8560ADS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
+
+MPC8541CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
+
+MPC8548CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+
+MPC8555CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
+
+PM854_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx pm854
+
+PM856_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx pm856
+
+sbc8540_config \
+sbc8540_33_config \
+sbc8540_66_config: unconfig
+ @if [ "$(findstring _66_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "... 66 MHz PCI" ; \
+ else \
+ >include/config.h ; \
+ echo "... 33 MHz PCI" ; \
+ fi
+ @./mkconfig -a SBC8540 ppc mpc85xx sbc8560
+
+sbc8560_config \
+sbc8560_33_config \
+sbc8560_66_config: unconfig
+ @if [ "$(findstring _66_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "... 66 MHz PCI" ; \
+ else \
+ >include/config.h ; \
+ echo "... 33 MHz PCI" ; \
+ fi
+ @./mkconfig -a sbc8560 ppc mpc85xx sbc8560
+
+stxgp3_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+
+TQM8540_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx tqm8540
+
+TQM8560_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx tqm8560
#########################################################################
## 74xx/7xx Systems
AmigaOneG3SE_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
+BAB7xx_config: unconfig
+ @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
+
+CPCI750_config: unconfig
+ @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd
+
+DB64360_config: unconfig
+ @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell
+
+DB64460_config: unconfig
+ @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell
+
+ELPPC_config: unconfig
+ @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
+
EVB64260_config \
EVB64260_750CX_config: unconfig
@./mkconfig EVB64260 ppc 74xx_7xx evb64260
-ZUMA_config: unconfig
+P3G4_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
PCIPPC2_config \
PCIPPC6_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2
-BAB7xx_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
-
-ELPPC_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
+ZUMA_config: unconfig
+ @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
#========================================================================
# ARM
## StrongARM Systems
#########################################################################
-at91rm9200dk_config : unconfig
- @./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
-
-lart_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 lart
+assabet_config : unconfig
+ @./mkconfig $(@:_config=) arm sa1100 assabet
dnp1110_config : unconfig
@./mkconfig $(@:_config=) arm sa1100 dnp1110
+gcplus_config : unconfig
+ @./mkconfig $(@:_config=) arm sa1100 gcplus
+
+lart_config : unconfig
+ @./mkconfig $(@:_config=) arm sa1100 lart
+
shannon_config : unconfig
@./mkconfig $(@:_config=) arm sa1100 shannon
## ARM92xT Systems
#########################################################################
-xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
+xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
+
+xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
+
+xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
+
+at91rm9200dk_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
+
+cmc_pu2_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+
+csb637_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200
+
+mp2usb_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+
+
+########################################################################
+## ARM Integrator boards - see doc/README-integrator for more info.
+integratorap_config \
+ap_config \
+ap966_config \
+ap922_config \
+ap922_XA10_config \
+ap7_config \
+ap720t_config \
+ap920t_config \
+ap926ejs_config \
+ap946es_config: unconfig
+ @board/integratorap/split_by_variant.sh $@
+
+integratorcp_config \
+cp_config \
+cp920t_config \
+cp926ejs_config \
+cp946es_config \
+cp1136_config \
+cp966_config \
+cp922_config \
+cp922_XA10_config \
+cp1026_config: unconfig
+ @board/integratorcp/split_by_variant.sh $@
+
+kb9202_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200
+
+lpd7a400_config \
+lpd7a404_config: unconfig
+ @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
+
+mx1ads_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx
+
+mx1fs2_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
omap1510inn_config : unconfig
@./mkconfig $(@:_config=) arm arm925t omap1510inn
+omap5912osk_config : unconfig
+ @./mkconfig $(@:_config=) arm arm926ejs omap5912osk
+
+omap1610inn_config \
+omap1610inn_cs0boot_config \
+omap1610inn_cs3boot_config \
+omap1610inn_cs_autoboot_config \
+omap1610h2_config \
+omap1610h2_cs0boot_config \
+omap1610h2_cs3boot_config \
+omap1610h2_cs_autoboot_config: unconfig
+ @if [ "$(findstring _cs0boot_, $@)" ] ; then \
+ echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
+ echo "... configured for CS0 boot"; \
+ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
+ echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \
+ echo "... configured for CS_AUTO boot"; \
+ else \
+ echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
+ echo "... configured for CS3 boot"; \
+ fi;
+ @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn
+
+omap730p2_config \
+omap730p2_cs0boot_config \
+omap730p2_cs3boot_config : unconfig
+ @if [ "$(findstring _cs0boot_, $@)" ] ; then \
+ echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
+ echo "... configured for CS0 boot"; \
+ else \
+ echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
+ echo "... configured for CS3 boot"; \
+ fi;
+ @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
+
+scb9328_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
+
smdk2400_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2400
+ @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
smdk2410_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2410
+ @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
+SX1_config : unconfig
+ @./mkconfig $(@:_config=) arm arm925t sx1
+
+# TRAB default configuration: 8 MB Flash, 32 MB RAM
trab_config \
-trab_big_flash_config: unconfig
+trab_bigram_config \
+trab_bigflash_config \
+trab_old_config: unconfig
@ >include/config.h
- @[ -z "$(findstring _big_flash,$@)" ] || \
- { echo "#define CONFIG_BIG_FLASH" >>include/config.h ; \
- echo "... with big flash support" ; \
+ @[ -z "$(findstring _bigram,$@)" ] || \
+ { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
+ echo "#define CONFIG_RAM_32MB" >>include/config.h ; \
+ echo "... with 8 MB Flash, 32 MB RAM" ; \
+ }
+ @[ -z "$(findstring _bigflash,$@)" ] || \
+ { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \
+ echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+ echo "... with 16 MB Flash, 16 MB RAM" ; \
+ echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
}
- @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab
+ @[ -z "$(findstring _old,$@)" ] || \
+ { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
+ echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+ echo "... with 8 MB Flash, 16 MB RAM" ; \
+ echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
+ }
+ @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
VCMA9_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t vcma9 mpl
+ @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
+
+#========================================================================
+# ARM supplied Versatile development boards
+#========================================================================
+versatile_config \
+versatileab_config \
+versatilepb_config : unconfig
+ @board/versatile/split_by_variant.sh $@
+
+voiceblue_smallflash_config \
+voiceblue_config: unconfig
+ @if [ "$(findstring _smallflash_,$@)" ] ; then \
+ echo "... boot from lower flash bank" ; \
+ echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \
+ else \
+ echo "... boot from upper flash bank" ; \
+ >include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \
+ fi
+ @./mkconfig -a voiceblue arm arm925t voiceblue
+
+cm4008_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695
+
+cm41xx_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
+
+#########################################################################
+## S3C44B0 Systems
+#########################################################################
+
+B2_config : unconfig
+ @./mkconfig $(@:_config=) arm s3c44b0 B2 dave
#########################################################################
## ARM720T Systems
#########################################################################
-impa7_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t impa7
+armadillo_config: unconfig
+ @./mkconfig $(@:_config=) arm arm720t armadillo
ep7312_config : unconfig
@./mkconfig $(@:_config=) arm arm720t ep7312
+impa7_config : unconfig
+ @./mkconfig $(@:_config=) arm arm720t impa7
+
+modnet50_config : unconfig
+ @./mkconfig $(@:_config=) arm arm720t modnet50
+
+evb4510_config : unconfig
+ @./mkconfig $(@:_config=) arm arm720t evb4510
+
#########################################################################
## XScale Systems
#########################################################################
+adsvix_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa adsvix
+
+cerf250_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa cerf250
+
cradle_config : unconfig
@./mkconfig $(@:_config=) arm pxa cradle
innokom_config : unconfig
@./mkconfig $(@:_config=) arm pxa innokom
+ixdp425_config : unconfig
+ @./mkconfig $(@:_config=) arm ixp ixdp425
+
lubbock_config : unconfig
@./mkconfig $(@:_config=) arm pxa lubbock
logodl_config : unconfig
@./mkconfig $(@:_config=) arm pxa logodl
+pxa255_idp_config: unconfig
+ @./mkconfig $(@:_config=) arm pxa pxa255_idp
+
wepep250_config : unconfig
@./mkconfig $(@:_config=) arm pxa wepep250
+xaeniax_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa xaeniax
+
+xm250_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa xm250
+
+xsengine_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa xsengine
+
+#########################################################################
+## ARM1136 Systems
+#########################################################################
+omap2420h4_config : unconfig
+ @./mkconfig $(@:_config=) arm arm1136 omap2420h4
+
#========================================================================
# i386
#========================================================================
## MIPS32 4Kc
#########################################################################
-incaip_config : unconfig
- @./mkconfig $(@:_config=) mips mips incaip
+xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
+
+incaip_100MHz_config \
+incaip_133MHz_config \
+incaip_150MHz_config \
+incaip_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _100MHz,$@)" ] || \
+ { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \
+ echo "... with 100MHz system clock" ; \
+ }
+ @[ -z "$(findstring _133MHz,$@)" ] || \
+ { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \
+ echo "... with 133MHz system clock" ; \
+ }
+ @[ -z "$(findstring _150MHz,$@)" ] || \
+ { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \
+ echo "... with 150MHz system clock" ; \
+ }
+ @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip
+
+tb0229_config: unconfig
+ @./mkconfig $(@:_config=) mips mips tb0229
+
+#########################################################################
+## MIPS32 AU1X00
+#########################################################################
+dbau1000_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1000 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1100_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1100 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1500_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1500 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1550_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1550_el_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+pb1000_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_PB1000 1" >>include/config.h
+ @./mkconfig -a pb1x00 mips mips pb1x00
+
+#########################################################################
+## MIPS64 5Kc
+#########################################################################
purple_config : unconfig
@./mkconfig $(@:_config=) mips mips purple
+#========================================================================
+# Nios
+#========================================================================
+#########################################################################
+## Nios32
+#########################################################################
+
+DK1C20_safe_32_config \
+DK1C20_standard_32_config \
+DK1C20_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _safe_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ echo "... NIOS 'safe_32' configuration" ; \
+ }
+ @[ -z "$(findstring _standard_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration" ; \
+ }
+ @[ -z "$(findstring DK1C20_config,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
+ }
+ @./mkconfig -a DK1C20 nios nios dk1c20 altera
+
+DK1S10_safe_32_config \
+DK1S10_standard_32_config \
+DK1S10_mtx_ldk_20_config \
+DK1S10_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _safe_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ echo "... NIOS 'safe_32' configuration" ; \
+ }
+ @[ -z "$(findstring _standard_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration" ; \
+ }
+ @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
+ { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \
+ echo "... NIOS 'mtx_ldk_20' configuration" ; \
+ }
+ @[ -z "$(findstring DK1S10_config,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
+ }
+ @./mkconfig -a DK1S10 nios nios dk1s10 altera
+
+ADNPESC1_DNPEVA2_base_32_config \
+ADNPESC1_base_32_config \
+ADNPESC1_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _DNPEVA2,$@)" ] || \
+ { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \
+ echo "... DNP/EVA2 configuration" ; \
+ }
+ @[ -z "$(findstring _base_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
+ echo "... NIOS 'base_32' configuration" ; \
+ }
+ @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
+ { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
+ echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
+ }
+ @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
+
+#########################################################################
+## Nios-II
+#########################################################################
+
+PK1C20_config : unconfig
+ @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent
+
+PCI5441_config : unconfig
+ @./mkconfig PCI5441 nios2 nios2 pci5441 psyent
+
+#========================================================================
+# MicroBlaze
+#========================================================================
+#########################################################################
+## Microblaze
+#########################################################################
+suzaku_config: unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_SUZAKU 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
+
#########################################################################
#########################################################################
| xargs rm -f
rm -f examples/hello_world examples/timer \
examples/eepro100_eeprom examples/sched \
- examples/mem_to_mem_idma2intr examples/82559_eeprom
-
+ examples/mem_to_mem_idma2intr examples/82559_eeprom \
+ examples/test_burst
rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
+ rm -f tools/mpc86x_clk tools/ncb
rm -f tools/easylogo/easylogo tools/bmp_logo
rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
rm -f tools/env/fw_printenv tools/env/fw_setenv
rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
+ rm -f board/trab/trab_fkt board/voiceblue/eeprom
+ rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds
clobber: clean
- find . -type f \
- \( -name .depend -o -name '*.srec' -o -name '*.bin' \) \
- -print \
- | xargs rm -f
+ find . -type f \( -name .depend \
+ -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
+ -print0 \
+ | xargs -0 rm -f
rm -f $(OBJS) *.bak tags TAGS
rm -fr *.*~
- rm -f u-boot u-boot.bin u-boot.srec u-boot.map System.map
+ rm -f u-boot u-boot.map u-boot.hex $(ALL)
rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
rm -f include/asm/proc include/asm/arch include/asm
projects / karo-tx-uboot.git / blobdiff